scholarly journals The Impact of Building Occupant Behavior on Energy Efficiency and Methods to Influence It: A Review of the State of the Art

Energies ◽  
2018 ◽  
Vol 11 (4) ◽  
pp. 953 ◽  
Author(s):  
Antonio Paone ◽  
Jean-Philippe Bacher
Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4155 ◽  
Author(s):  
Pedro Cumino ◽  
Wellington Lobato Junior ◽  
Thais Tavares ◽  
Hugo Santos ◽  
Denis Rosário ◽  
...  

Collaboration between multiple Unmanned Aerial Vehicles (UAVs) to set up a Flying Ad Hoc Network (FANET) is a growing trend since future applications claim for more autonomous and rapid deployable systems. The user experience on watching videos transmitted over FANETs should always be satisfactory even under influence of topology changes caused by the energy consumption of UAVs. In addition, the FANET must keep the UAVs cooperating as much as possible during a mission. However, one of the main challenges in FANET is how to mitigate the impact of limited energy resources of UAVs on the FANET operation in order to monitor the environment for a long period of time. In this sense, UAV replacement is required in order to avoid the premature death of nodes, network disconnections, route failures, void areas, and low-quality video transmissions. In addition, decision-making must take into account energy consumption associated with UAV movements, since they are generally quite energy-intensive. This article proposes a cooperative UAV scheme for enhancing video transmission and global energy efficiency called VOEI. The main goal of VOEI is to maintain the video with QoE support while supporting the nodes with a good connectivity quality level and flying for a long period of time. Based on an Software Defined Network (SDN) paradigm, the VOEI assumes the existence of a centrailized controller node to compute reliable and energy-efficiency routes, as well as detects the appropriate moment for UAV replacement by considering global FANET context information to provide energy-efficiency operations. Based on simulation results, we conclude that VOEI can effectively mitigate the energy challenges of FANET, since it provides energy-efficiency operations, avoiding network death, route failure, and void area, as well as network partitioning compared to state-of-the-art algorithm. In addition, VOEI delivers videos with suitable Quality of Experience (QoE) to end-users at any time, which is not achieved by the state-of-the-art algorithm.


Author(s):  
Nicole B. Ellison

This chapter examines the state of the art in telework research. The author reviews the most central scholarly literature examining the phenomenon of telework (also called home-based work or telecommuting) and develops a framework for organizing this body of work. She organizes previous research on telework into six major thematic concerns relating to the definition, measurement, and scope of telework; management of teleworkers; travel-related impacts of telework; organizational culture and employee isolation; boundaries between “home” and “work” and the impact of telework on the individual and the family. Areas for future research are suggested.


2021 ◽  
Author(s):  
Belén Agulló ◽  
◽  
Anna Matamala ◽  

Virtual reality has attracted the attention of industry and researchers. Its applications for entertainment and audiovisual content creation are endless. Filmmakers are experimenting with different techniques to create immersive stories. Also, subtitle creators and researchers are finding new ways to implement (sub)titles in this new medium. In this article, the state-of-the-art of cinematic virtual reality content is presented and the current challenges faced by filmmakers when dealing with this medium and the impact of immersive content on subtitling practices are discussed. Moreover, the different studies on subtitles in 360º videos carried out so far and the obtained results are reviewed. Finally, the results of a corpus analysis are presented in order to illustrate the current subtitle practices by The New York Times and the BBC. The results have shed some light on issues such as position, innovative graphic strategies or the different functions, challenging current subtitling standard practices in 2D content.


Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8319
Author(s):  
Claudia Esposito ◽  
Johan Steelant ◽  
Maria Rosaria Vetrano

Cryogenic cavitation affects the operation of liquid propulsion systems during the first phase of a launch. Its effects within orifices or turbopumps can range from mild instabilities to catastrophic damages to the structures, jeopardizing the launch itself. Therefore, to ensure the proper designing of propulsion systems, cavitation phenomena cannot be neglected. Although hydrodynamic cavitation has been studied for decades, the impact of the nature of the fluid has been sparsely investigated. Therefore, this review, beginning from the basic concepts of cavitation, analyzes the literature dedicated to hydrodynamic cryogenic cavitation through an orifice. Our review provides a clear vision of the state-of-the-art from experimental and modeling viewpoints, identifies the knowledge gaps in the literature, and proposes a way to further investigate cryogenic cavitation in aerospace science.


OCL ◽  
2022 ◽  
Vol 29 ◽  
pp. 6
Author(s):  
Patrick Carré

In a context where the search for naturalness, the need to reduce the carbon footprint and the development of a decentralized crushing sector are intensifying, mechanical extraction is a technology that is regaining major importance for the industry. The performance of this technique remains far below what is desirable, while the understanding of the main phenomena involved in screw presses remains insufficient. This article, after a brief presentation of the state of the art of this discipline, presents a new model centered on the notions of pressure generation and plasticity. According to this approach, plasticity can account for parameters such as the water and oil content of oilseeds, their temperature, and their possible dehulling. Plasticity in turn would explain both the compressibility of the cake and its ability to resist the thrust of the screws, and consequently to generate pressure or to creep or flow backward depending on the geometry of the screw and the cage. The model must also incorporate the notions of compression velocity, friction, and the complexity of the interactions between these parameters and the impact of the succession of screw segments and cone rings. It has been built on observation and experience and gives an understanding of the need to work simultaneously on the conditioning and geometry of the presses to achieve improved performance in terms of energy, efficiency, and reduction of the temperatures experienced by the proteins and oils


2021 ◽  
Author(s):  
Andrés D. Izeta ◽  
Roxana Cattáneo

This article discusses the state-of-the art of digital archives for archaeological research in Argentina. It also presents and characterises the national and international legal framework and the role played by funding agencies and professional bodies in archaeological practice. In addition, it reports how legal corpora regulate the impact on the management of archaeological digital data. Research infrastructures available at the national level are described, such as the Suquía, an institutional digital archive devoted to archaeology since 2016. Finally, we make a general evaluation of the status quo of research infrastructures mostly concerned with preserving and disseminating data from archaeological research at the national level.


2014 ◽  
pp. 577-597
Author(s):  
Tarek Gaber ◽  
Ning Zhang

Existing Digital Rights Management (DRM) systems allow consumers to buy digital licenses to access the corresponding contents on their devices. However, with these DRM systems, the consumers are unable to resell their licenses. Supporting digital license reselling adds additional challenges to DRM technologies and could find a new E-market. The aims of this chapter are as follows. The problem of reselling digital licenses is formally formulated. Then the state-of-the-art of the existing license reselling solutions proposed in the literature is discussed. Their strengths and limitations are analyzed. Then a framework allowing a consumer to resell his/her license to another consumer without compromising the underlying security of the DRM system is proposed. Finally, the impact of allowing license reselling on E-commerce is discussed.


Sign in / Sign up

Export Citation Format

Share Document