scholarly journals Valorization of Prosopis juliflora Woody Biomass in Northeast Brazilian through Dry Torrefaction

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3465
Author(s):  
José Airton de Mattos Carneiro-Junior ◽  
Giulyane Felix de de Oliveira ◽  
Carine Tondo Alves ◽  
Heloysa Martins Carvalho Andrade ◽  
Silvio Alexandre Beisl Vieira de Beisl Vieira de Melo ◽  
...  
Keyword(s):  
Calorific Value ◽  
Isoconversional Methods ◽  
Inert Atmosphere ◽  
Prosopis Juliflora ◽  
Effect Of Temperature ◽  
Energy Yield ◽  
Pyrolysis Kinetics ◽  
Heating Rates ◽  
Acid Ratio ◽  
Solid Biofuel

Torrefaction has been investigated to improve the desirable properties of biomass as solid biofuel, usually used in natura as firewood in several countries. This paper has the main objective to present a broad characterization of the biomass Prosopis juliflora (P. juliflora), investigating its potential as a solid biofuel after its torrefaction process. The methodology was based on different procedures. The experimental runs were carried out at 230, 270, and 310 °C for 30 min, using a bench-scale torrefaction apparatus, with an inert atmosphere. In order to investigate the effect of temperature in constant time, torrefaction parameters were calculated, such as mass yield, energy yield, calorific value, base-to-acid ratio (B/A), and the alkaline index (AI). The physicochemical properties of the torrefied samples were determined and thermogravimetric analysis was used to determine the kinetic parameters at four different heating rates of 5, 10, 20, and 30 °C/min. Pyrolysis kinetics was investigated using the Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) isoconversional methods. Highly thermally stable biofuels were obtained due to the great degradation of hemicellulose and cellulose during torrefaction at higher temperatures. The highest heating value (HHV) of the samples varied between 18.3 and 23.1 MJ/kg, and the energy yield between 81.1 and 96.2%. The results indicate that P. juliflora torrefied becomes a more attractive and competitive solid biofuel alternative in the generation of heat and energy in northeast Brazil.

scholarly journals Torrefaction of Napier Grass and Oil Palm Petiole Waste Using Drop-type Pyrolysis Reactor

2021 ◽  
Author(s):  
Syazmi Zul Arif Hakimi Saadon ◽  
Noridah Osman ◽  
Moviin Damodaran ◽  
Shan En Liew
Keyword(s):  
Residence Time ◽  
Oil Palm ◽  
Waste Product ◽  
Calorific Value ◽  
Napier Grass ◽  
Effect Of Temperature ◽  
Energy Yield ◽  
Pyrolysis Reactor ◽  
Parameter Ranges ◽  
Two Parameters

Abstract Interest in torrefaction has improved along the recent years and it has been studied extensively as a mean of preparing solid fuels. Biomass to be considered as a renewable source of energy must endeavor improvement continuously and where it is more sustainable going forward in which can come from waste product, wild and cultivated plant. The aim of this study is to investigate the effect of temperature and residence time of wild Napier grass and Oil palm petiole from waste. The torrefied samples were derived by pyrolysis reactor mimicking torrefaction procedure. The temperature parameter ranges between 220 and 300 ℃ while residence time parameter is from 10 minutes to 50 minutes of reaction. It was found that as temperature and time increasing, moisture content and amount of O and H atoms decreases as well as both mass and energy yield, but calorific value and the energy density increase along with both two parameters. Between the two parameters, the temperature variation shows more significant changes to the torrefied samples as compared time. The optimized temperature and time are found to be 260 ℃ and 30 minutes, respectively. Remarkably, the usage of pyrolyzer as torrefaction reaction has proved to be a good option since they share similar characteristics while can also produce product with similar properties reflecting torrefaction process.

MODEL FREE KINETICS ANALYSIS OF IMPERATA CYLINDRICA (LALANG)

2016 ◽  
Vol 78 (8-3) ◽  
Author(s):  
Olagoke Oladokun ◽  
Arshad Ahmad ◽  
Tuan Amran Tuan Abdullah ◽  
Bemgba Bevan Nyakuma ◽  
Syie Luing Wong
Keyword(s):  
Activation Energy ◽  
Biomass Conversion ◽  
Frequency Factor ◽  
Isoconversional Methods ◽  
Green Energy ◽  
Imperata Cylindrica ◽  
Heating Rates ◽  
Model Free ◽  
Solid Biofuel ◽  
Kinetics Of

This study is the first attempt at investigating the solid state decomposition and the devolatilization kinetics of Imperata cylindrica (lalang) grass termed the “farmer’s nightmare weed” as a potential solid biofuel of the future. Biomass conversion technologies such as pyrolysis and gasification can be utilized for future green energy needs. However an important step in the efficient utilization and process optimizing of biomass conversion processes is understanding the thermal decomposition kinetics of the feedstock. Consequently, thermogravimetric analysis (TGA) of Imperata cylindrica was carried out in the temperature range of 30-1000 °C at four heating rates of 5, 10, 15, and 20 K min-1 using Nitrogen at a flow rate of 20 L min-1 as purge gas. Using the TGA results, the kinetic parameters activation energy (Ea) and pre-exponential frequency factor (ko) of the grass were estimated via the model free or isoconversional methods of Kissinger and Starink. The results obtained for Kissinger model were 151.36 kJ moI-1 and 5.83 x 109 min-1 for activation energy and pre-exponential frequency factor respectively. However, Starink model activation energy and pre-exponential frequency factor were a function of conversion (α) with average values of 159.93 kJ mol-1 and 6.33 x 1022 min-1 respectively. 

scholarly journals Valorization of winery and distillery by-products by hydrothermal carbonization

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Marco Barbanera ◽  
Alessandro Cardarelli ◽  
Eleonora Carota ◽  
Marco Castellini ◽  
Tommaso Giannoni ◽  
...  
Keyword(s):  
Calorific Value ◽  
Product Yield ◽  
Hydrothermal Carbonization ◽  
Extraction Yield ◽  
Grape Pomace ◽  
Effect Of Temperature ◽  
Solid Biofuel ◽  
High Concentrations ◽  
Biological Methods ◽  
By Products

AbstractThis work aims at finding an alternative strategy to manage the waste generated by the winemaking industry to obtain a solid biofuel and phenolic compounds. The effect of temperature (180–260 °C), residence time (1–7 h), and biomass-to-liquid ratio (0.05–0.25) on the co-hydrothermal carbonization of vine pruning and exhausted grape pomace, by using vinasse as moisture source, is studied. The effect of the variables is investigated and optimized using the Box–Behnken design of response surface methodology to maximize mass yield, fuel ratio, energy densification yield and phenols extraction yield and to minimize energy consumption. The statistical analysis shows that the carbonization temperature is a crucial parameter of the process, decreasing the product yield on one hand and improving the quality of hydrochar on the other. At the optimal conditions (246.3 °C, 1.6 h, 0.066), an hydrochar yield of 52.64% and a calorific value of 24.1 MJ/kg were obtained. Moreover, the analysis of the H/C and O/C ratios of hydrochars demonstrates that carbonisation significantly improves the fuel properties of solid biofuel. Liquid by-products obtained from the HTC process are found to contain high concentrations of organic matter but the BOD/COD ratios suggest their potential valorization by biological methods.

Thermogravimetric Analysis and Pyrolysis Kinetics of Tannery Wastes in an Inert Atmosphere

2020 ◽  
Vol 115 (4) ◽  
pp. 123-131
Author(s):  
Lan Luo ◽  
Cheng-Kung Liiu ◽  
Eleanor Brown ◽  
Fang Wang ◽  
Yadi Hu ◽  
...  
Keyword(s):  
Reaction Model ◽  
Inert Atmosphere ◽  
Single Step ◽  
Industrial Wastes ◽  
Future Application ◽  
Pyrolysis Kinetics ◽  
Heating Rates ◽  
Renewable Chemicals ◽  
Tannery Wastes ◽  
Kinetics Of

Industrial wastes generated from tanneries contain large quantities of water-insoluble proteins, which may be used for the production of composite materials, renewable chemicals and energy. In this work, the pyrolysis kinetics of powdered sheep fur wastes (SFW) was studied by thermogravimetry (TG) at different heating rates from room temperature to 600°C in nitrogen atmosphere. TG results revealed that there are three stages in this process. The overall apparent activation energy (E) in the main pyrolysis stage was determined to be 275.6 kJ mol-1 by modified Kissinger-Akahira-Sunose (MKAS) method. Because the pyrolysis of SFW could not be described by a single-step reaction, the experimental DTG curve of SFW was deconvoluted into three individual peaks followed by reconstruction of TG curves corresponding to three pseudo components. The average values of E obtained for these pseudo components are 234.7 kJ mol-1, 176.4 kJ mol-1, and 186.2 kJ mol-1, respectively. Generalized master-plots method indicated that the SFW pyrolysis may follow the random nucleation and growth mechanism (Avrami-Erofeev model). Reaction model functions f(?) for these pseudo components could be expressed as: f(?)=3.1(1-?)[-ln(1-?)]0.67; f(?)=3.6(1-?)[-ln(1-?)]0.72, and  f(?)=3.9(1-?)[-ln(1-?)]0.74, respectively. These results may provide insight for further studies as well as for future application of pyrolysis technology for tannery wastes. 

Pyrolysis of corn cob: physico-chemical characterization, thermal decomposition behavior and kinetic analysis

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sanjay Singh ◽  
Ashish N. Sawarkar
Keyword(s):  
Crop Residues ◽  
Chemical Characterization ◽  
Isoconversional Methods ◽  
Inert Atmosphere ◽  
Agricultural Crop ◽  
Corn Cob ◽  
Heating Rates ◽  
Model Free ◽  
Physico Chemical ◽  
Decomposition Behavior

AbstractBioenergy out of lignocellulosic biomass, especially from agricultural crop residues, is making massive inroads in our quest for sustainable environment. In the present study, detailed physico-chemical characterization, thermal degradation characteristics, and kinetics of pyrolysis of corn cob are reported. Thermogravimetric experiments were performed at different heating rates, such as, 10, 20, and 30 °C/min in an inert atmosphere. Thermogravimetric (TG) and derivative thermogravimetric (DTG) curves inferred the thermal behavior characteristics of corn cob. Significant content of cellulose and hemicellulose put together (76.23%) suggested tremendous potential of corn cob to give enhanced yield of bio-oil through pyrolysis. Maximum mass loss of 61.92% for corn cob was observed in the temperature range of 180–360 °C. The kinetic parameters for pyrolysis of corn cob were determined by employing model-free isoconversional methods like, Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa, and Starink. Activation energy from FWO (62.44 kJ/mol) and Starink (61.74 kJ/mol) method for pyrolysis of corn cob was found to be in close proximity. The results revealed prospective bioenergy potential of corn cob as a feedstock for pyrolysis process.

scholarly journals Co-Combustion Studies of Low-Rank Coal and Refuse-Derived Fuel: Performance and Reaction Kinetics

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3796
Author(s):  
Mudassar Azam ◽  
Asma Ashraf ◽  
Saman Setoodeh Setoodeh Jahromy ◽  
Sajjad Miran ◽  
Nadeem Raza ◽  
...  
Keyword(s):  
Activation Energy ◽  
Waste Management ◽  
Energy Demand ◽  
Power Plants ◽  
Combustion Process ◽  
Isoconversional Methods ◽  
Low Rank ◽  
Heating Rates ◽  
Average Activation Energy ◽  
Refuse Derived Fuel

In connection to present energy demand and waste management crisis in Pakistan, refuse-derived fuel (RDF) is gaining importance as a potential co-fuel for existing coal fired power plants. This research focuses on the co-combustion of low-quality local coal with RDF as a mean to reduce environmental issues in terms of waste management strategy. The combustion characteristics and kinetics of coal, RDF, and their blends were experimentally investigated in a micro-thermal gravimetric analyzer at four heating rates of 10, 20, 30, and 40 °C/min to ramp the temperature from 25 to 1000 °C. The mass percentages of RDF in the coal blends were 10%, 20%, 30%, and 40%, respectively. The results show that as the RDF in blends increases, the reactivity of the blends increases, resulting in lower ignition temperatures and a shift in peak and burnout temperatures to a lower temperature zone. This indicates that there was certain interaction during the combustion process of coal and RDF. The activation energies of the samples were calculated using kinetic analysis based on Kissinger–Akahira–Sunnose (KAS) and Flynn–Wall–Ozawa (FWO), isoconversional methods. Both of the methods have produced closer results with average activation energy between 95–121 kJ/mol. With a 30% refuse-derived fuel proportion, the average activation energy of blends hit a minimum value of 95 kJ/mol by KAS method and 103 kJ/mol by FWO method.

Thermo-catalytic decomposition of polystyrene waste: Comparative analysis using different kinetic models

2019 ◽  
Vol 38 (2) ◽  
pp. 202-212 ◽  
Author(s):  
Ghulam Ali ◽  
Jan Nisar ◽  
Munawar Iqbal ◽  
Afzal Shah ◽  
Mazhar Abbas ◽  
...  
Keyword(s):  
Activation Energy ◽  
Copper Oxide ◽  
Solid Waste ◽  
Thermodynamic Parameters ◽  
Model Fitting ◽  
Catalytic Decomposition ◽  
Decomposition Reaction ◽  
Inert Atmosphere ◽  
Heating Rates ◽  
Model Free

Due to a huge increase in polymer production, a tremendous increase in municipal solid waste is observed. Every year the existing landfills for disposal of waste polymers decrease and the effective recycling techniques for waste polymers are getting more and more important. In this work pyrolysis of waste polystyrene was performed in the presence of a laboratory synthesized copper oxide. The samples were pyrolyzed at different heating rates that is, 5°Cmin−1, 10°Cmin−1, 15°Cmin−1 and 20°Cmin−1 in a thermogravimetric analyzer in inert atmosphere using nitrogen. Thermogravimetric data were interpreted using various model fitting (Coats–Redfern) and model free methods (Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman). Thermodynamic parameters for the reaction were also determined. The activation energy calculated applying Coats–Redfern, Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose and Friedman models were found in the ranges 105–148.48 kJmol−1, 99.41–140.52 kJmol−1, 103.67–149.15 kJmol−1 and 99.93–141.25 kJmol−1, respectively. The lowest activation energy for polystyrene degradation in the presence of copper oxide indicates the suitability of catalyst for the decomposition reaction to take place at lower temperature. Moreover, the obtained kinetics and thermodynamic parameters would be very helpful in determining the reaction mechanism of the solid waste in a real system.

scholarly journals Torrefaction of Agricultural Residues: Effect of Temperature and Residence Time on the Process Products Properties

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Katarzyna Jagodzińska ◽  
Michał Czerep ◽  
Edyta Kudlek ◽  
Mateusz Wnukowski ◽  
Marek Pronobis ◽  
...  
Keyword(s):  
High Performance ◽  
Calorific Value ◽  
Barley Straw ◽  
Effect Of Temperature ◽  
Gas Chromatography Mass Spectrometry ◽  
Toxicity Tests ◽  
Main Compound ◽  
Flame Ionization ◽  
Polycyclic Aromatic ◽  
The Impact

Abstract To date, few studies on the potential utilization of agricultural residue torrefaction products have been performed. Thus, torrefaction product characterization aimed at its potential utilization was performed. Wheat–barley straw pellets and wheat–rye chaff were used in the study. The impact of the torrefaction temperature (280–320 °C) on polycyclic aromatic hydrocarbons (PAHs) content in the biochar and noncondensable gas (noncondensables) composition was investigated. The impact of the torrefaction time (30–75 min) on the composition of the condensable volatiles (condensables) and their toxicity were also studied. The torrefaction process was performed in a batch-scale reactor. The PAH contents were measured using high-performance liquid chromatography (HPLC), and the noncondensables composition was measured online using a gas analyzer and then gas chromatograph with flame ionization detector (GC-FID). The condensables composition and main compound quantification were determined and quantified using gas chromatography–mass spectrometry (GC/MS). Three toxicity tests, for saltwater bacteria (Microtox® bioassay), freshwater crustaceans (Daphtoxkit F magna®), and vascular plants (Lemna sp. growth inhibition test), were performed for the condensables. The PAHs content in the biochar, regardless of the torrefaction temperature, allows them to be used in agriculture. The produced torgas shall be co-combusted with full-caloric fuel because of its low calorific value. Toxic compounds (furans and phenols) were identified in the condensable samples, and regardless of the processing time, the condensables were classified as highly toxic. Therefore, they can be used either as pesticides or as an anaerobic digestion substrate after their detoxification.

scholarly journals Evaluation of ash related problems during sewage sludge combustion

2019 ◽  
pp. 184-191
Author(s):  
Agnes Serbanescu ◽  
Mona Barbu ◽  
Ionut Cristea ◽  
Gina Catrina ◽  
Georgiana Cernica ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Combustion Process ◽  
Experimental Studies ◽  
Calorific Value ◽  
Waste To Energy ◽  
Mineral Matter ◽  
X Ray ◽  
Analytical Technique ◽  
Acid Ratio ◽  
Sludge Ash

A good function of waste-to-energy installation requires knowledge of the combustion characteristics of the fuel and fusion characteristics of the ash produced in the combustion process. Sewage sludge could be considered as renewable fuel due the high quantity of organics of sufficiently high calorific value. The combustion of sewage sludge can cause operating problems due to high ash content containing mineral compounds. This paper presents the oxide composition of three kinds of sewage sludge ashes and the influence on the slagging and fouling process in combustion. For comparation, two coal samples were selected, a low and a high rank coal. The mineral matter were investigated by the X-ray fluorescence analytical technique using the Rigaku CG X-ray Spectrofluorimeter. The evaluation of slagging and fouling process was performed on the basis of some indices: the basic oxides, the base-to-acid ratio, the slagging index and the fouling index. The conclusion based on experimental studies is that depending on mineral content the sewage sludge ash can cause high to moderate slagging and fouling hazard.

Sign in / Sign up

Export Citation Format

Share Document