scholarly journals By the Hand of Angelos? Analytical Investigation of a Remarkable 15th Century Cretan Icon

Heritage ◽  
2020 ◽  
Vol 3 (4) ◽  
pp. 1360-1372
Author(s):  
Georgios P. Mastrotheodoros ◽  
Marios Theodosis ◽  
Eleni Filippaki ◽  
Konstantinos G. Beltsios
Keyword(s):  
Cross Sections ◽  
Multispectral Imaging ◽  
Optical Microscope ◽  
Art Museum ◽  
Analytical Investigation ◽  
X Ray Diffraction ◽  
Red Lake ◽  
15Th Century ◽  
Green Earth ◽  
Outstanding Quality

A 15th century St Theodoros icon of outstanding quality is on display at the Zakynthos Ecclesiastical Art Museum. On the basis of certain stylistic characteristics, this icon has been attributed to the legendary Cretan painter Angelos Akotantos. In order to explore the latter attribution, the icon was subjected to examination via multispectral imaging, while microsamples were investigated through an optical microscope (OM), a scanning electron microscope coupled with an energy dispersive analyzer (SEM-EDX), μ-Raman and X-ray diffraction (XRD). The data were evaluated in the light of the findings of recent analytical studies conducted on several genuine Angelos icons. Identified materials include gypsum, gold leaf, bole, natural ultramarine, lead white, charcoal, green earth, red lake, minium, cinnabar, and red and yellow ochres. The identified materials resemble those employed by Angelos, while the identification of ultramarine is of particular significance, as this extremely expensive and rather rare pigment was very often used by the particular painter. Moreover, multispectral imaging reveals notable painting technique similarities between the icon in consideration and known Angelos icons, while cross sections of corresponding samples exhibit almost identical structures. Overall, the present work considerably strengthens the suggestion that the St Theodoros icon in consideration was painted by Angelos and also widens our knowledge regarding the late Byzantine painting.

Role of Aluminium on the Microstructure and Corrosion Behaviour of Magnesium Prepared by Powder Metallurgy Method

2020 ◽  
Vol 17 (3) ◽  
pp. 8206-8213
Author(s):  
J. Alias
Keyword(s):  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Corrosion Behaviour ◽  
Corrosion Current ◽  
Optical Microscope ◽  
High Reactivity ◽  
Aluminium Content ◽  
Powder Metallurgy Method ◽  
X Ray Diffraction ◽  
Promising Development

Much research on magnesium (Mg) emphasises creating good corrosion resistance of magnesium, due to its high reactivity in most environments. In this study, powder metallurgy (PM) technique is used to produce Mg samples with a variation of aluminium (Al) composition. The effect of aluminium composition on the microstructure development, including the phase analysis was characterised by optical microscope (OM), scanning electron microscopy (SEM) and x-ray diffraction (XRD). The mechanical property of Mg sample was performed through Vickers microhardness. The results showed that the addition of aluminium in the synthesised Mg sample formed distribution of Al-rich phases of Mg17Al12, with 50 wt.% of aluminium content in the Mg sample exhibited larger fraction and distribution of Al-rich phases as compared to the 20 wt.% and 10 wt.% of aluminium content. The microhardness values were also increased at 20 wt.% and 50 wt.% of aluminium content, comparable to the standard microhardness value of the annealed Mg. A similar trend in corrosion resistance of the Mg immersed in 3.5 wt.% NaCl solution was observed. The corrosion behaviour was evaluated based on potentiodynamic polarisation behaviour. The corrosion current density, icorr, is observed to decrease with the increase of Al composition in the Mg sample, corresponding to the increase in corrosion resistance due to the formation of aluminium oxide layer on the Al-rich surface that acted as the corrosion barrier. Overall, the inclusion of aluminium in this study demonstrates the promising development of high corrosion resistant Mg alloys.

scholarly journals Polyurethane Composite Foams Synthesized Using Bio-Polyols and Cellulose Filler

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3474
Author(s):  
Katarzyna Uram ◽  
Milena Leszczyńska ◽  
Aleksander Prociak ◽  
Anna Czajka ◽  
Michał Gloc ◽  
...  
Keyword(s):  
Cross Sections ◽  
Raw Materials ◽  
Polyurethane Foams ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Polyurethane Composite ◽  
Composite Foams ◽  
Closed Cell ◽  
Ft Ir ◽  
The Fourier Transform

Rigid polyurethane foams were obtained using two types of renewable raw materials: bio-polyols and a cellulose filler (ARBOCEL® P 4000 X, JRS Rettenmaier, Rosenberg, Germany). A polyurethane system containing 40 wt.% of rapeseed oil-based polyols was modified with the cellulose filler in amounts of 1, 2, and 3 php (per hundred polyols). The cellulose was incorporated into the polyol premix as filler dispersion in a petrochemical polyol made using calenders. The cellulose filler was examined in terms of the degree of crystallinity using the powder X-ray diffraction PXRD -and the presence of bonds by means of the fourier transform infrared spectroscopy FT-IR. It was found that the addition of the cellulose filler increased the number of cells in the foams in both cross-sections—parallel and perpendicular to the direction of the foam growth—while reducing the sizes of those cells. Additionally, the foams had closed cell contents of more than 90% and initial thermal conductivity coefficients of 24.8 mW/m∙K. The insulation materials were dimensionally stable, especially at temperatures close to 0 °C, which qualifies them for use as insulation at low temperatures.

scholarly journals Nanotubular Oxide Layer Formed on Helix Surfaces of Dental Screw Implants

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 115 ◽  
Author(s):  
Magdalena Jażdżewska ◽  
Michał Bartmański
Keyword(s):  
Oxide Layer ◽  
Cross Sections ◽  
Surface Coverage ◽  
Artificial Saliva ◽  
Corrosion Current ◽  
Optical Microscope ◽  
Significant Difference ◽  
Helix Surfaces ◽  
Future Work ◽  
Oxidation Parameters

Surface modification is used to extend the life of implants. To increase the corrosion resistance and improve the biocompatibility of metal implant materials, oxidation of the Ti-13Nb-13Zr titanium alloy was used. The samples used for the research had the shape of a helix with a metric thread, with their geometry imitating a dental implant. The oxide layer was produced by a standard electrochemical method in an environment of 1M H3PO4 + 0.3% HF for 20 min, at a constant voltage of 30 V. The oxidized samples were analyzed with a scanning electron microscope. Nanotubular oxide layers with internal diameters of 30–80 nm were found. An analysis of the surface topography was performed using an optical microscope, and the Sa parameter was determined for the top of the helix and for the bottom, where a significant difference in value was observed. The presence of the modification layer, visible at the bottom of the helix, was confirmed by analyzing the sample cross-sections using computed tomography. Corrosion tests performed in the artificial saliva solution demonstrated higher corrosion current and less noble corrosion potential due to incomplete surface coverage and pitting. Necessary improved oxidation parameters will be applied in future work.

scholarly journals Analytical investigation of high-velocity impact on hybrid unidirectional/woven composite panels

2016 ◽  
Vol 30 (4) ◽  
pp. 545-563 ◽  
Author(s):  
H Shanazari ◽  
GH Liaghat ◽  
H Hadavinia ◽  
A Aboutorabi
Keyword(s):  
Cross Sections ◽  
Shear Failure ◽  
Failure Criteria ◽  
Analytical Investigation ◽  
Woven Fabrics ◽  
Body Armor ◽  
Ballistic Performance ◽  
Nonwoven Fabrics ◽  
Ballistic Protection ◽  
Maximum Tensile Strain

In addition to fiber properties, the fabric structure plays an important role in determining ballistic performance of composite body armor textile. Textile structures used in ballistic protection are woven fabrics, unidirectional (UD) fabric structures, and nonwoven fabrics. In this article, an analytical model based on wave propagation and energy balance between the projectile and the target is developed to analyze hybrid fabric panels for ballistic protection. The hybrid panel consists of two types of structure: woven fabrics as the front layers and UD material as the rear layers. The model considers different cross sections of surface of the target in the woven and UD fabric of the hybrid panel. Also the model takes into account possible shear failure by using shear strength together with maximum tensile strain as the failure criteria. Reflections of deformation waves at interface between the layers and also the crimp of the yarn are modeled in the woven part of the hybrid panel. The results show greater efficiency of woven fibers in front layers (more shear resistance) and UD yarns in the rear layers (more tensile resistance), leading to better ballistic performance. Also modeling the yarn crimp results in more trauma at the backface of the panel producing data closer to the experimental results. It was found that there is an optimum ratio of woven to UD materials in the hybrid ballistic panel.

Organoclay-reinforced polyethersulfone-modified epoxy-based hybrid nanocomposites

2011 ◽  
Vol 23 (7) ◽  
pp. 526-534 ◽  
Author(s):  
Yang Wang ◽  
Boming Zhang ◽  
Jinrui Ye
Keyword(s):  
Electron Microscopy ◽  
Fracture Toughness ◽  
Electron Microscope ◽  
Optical Microscope ◽  
Mechanical Analysis ◽  
Hybrid Nanocomposites ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Modified Epoxy ◽  
Scanning Electron

Hybrid nanocomposites were successfully prepared by the incorporation of polyethersulfone (PES) and organoclay into epoxy resin. They had higher fracture toughness than the prepared PES/epoxy blend and organoclay/epoxy nanocomposites. The microstructures of the hybrid nanocomposites were studied. They were comprised of homogeneous PES/epoxy semi-interpenetrating network (semi-IPN) matrices and organoclay micro-agglomerates made up of tactoid-like regions composed of ordered exfoliated organoclay with various orientations. The former was confirmed with dynamic mechanical analysis, scanning electron microscopy and transmission electron microscopy, while the latter was successfully observed with X-ray diffraction measurements, optical microscope, scanning electron microscope and transmission electron microscope. The improvement of their fracture toughness was due to the synergistic toughening effect of the PES and the organoclay and related to their microstructures.

scholarly journals Development of Evaluation Method for Damage of Oxidation CoNiCrAlY Coating

2019 ◽  
Vol 804 ◽  
pp. 47-51
Author(s):  
Mo Chen ◽  
Kodai Yoshikawa ◽  
Zhen Qiang Song ◽  
Shijie Zhu
Keyword(s):  
Cross Sections ◽  
Gas Turbines ◽  
Evaluation Method ◽  
Thermal Spraying ◽  
Optical Microscope ◽  
Thermally Grown Oxide ◽  
Interfacial Damage ◽  
Barrier Coating ◽  
Plasma Sprayed ◽  
Conicraly Coating

The bond coat plays an important role in the failure of the thermal barrier coating (TBC) system used for gas turbines [1,2]. In this research, the CoNiCrAlY coated Ni-base superalloy specimens were used for developing evaluation method for interfacial damage in the coat. Samples were exposed at 1000°C and 1100°C for up to 1000 hours. The morphology and residual stress in the thermally grown oxide (TGO) layer on the CoNiCrAlY coating were characterized by microscopic observation and luminescence spectroscope, respectively. The microstructure and damage o\n both the coating surfaces and the cross sections were observed by optical microscope and scanning electron microscope. According to the results, the low pressure plasma sprayed CoNiCrAlY coating (LPPS) showed the thinnest TGO layer and lowest residual stress.Residual stress decreased with an increase in exposure time, depending on the morphology of TGO layer. The effects of thermal spraying methods on the oxidation of yttrium in TGO layer and BC layer and its influence on interfacial damage were discussed.

scholarly journals SYNTHESIS OF NANOPARTICLE SEMICONDUCTOR CdS IN PHASE TRANSFORMED MICROEMULSION OF WATER/ SDS/ ETANOL/ n-HEXANE SYSTEM

2010 ◽  
Vol 5 (2) ◽  
pp. 92-97
Author(s):  
Fitria Rahmawati ◽  
Abu Masykur ◽  
Heni Worowidiyanti
Keyword(s):  
Sodium Dodecyl Sulphate ◽  
Cluster Size ◽  
Sodium Dodecyl ◽  
Optical Microscope ◽  
Water Type ◽  
Emulsion System ◽  
X Ray Diffraction ◽  
Inversion Point ◽  
Water Emulsion ◽  
Type Transformation

The objective of this research is to study wheather the emulsion system of water/SDS (Sodium Dodecyl Sulphate)/ethanol/n-hexane can be transformed from S1 (hydrocarbon in water) type to S2 (water in hydrocarbon). CdS can be synthesized in the transformed product of microemulsion medium. The emulsion type transformation from S1 to S2 was conducted by adding n-hexane increment of 5 mL as hydrocarbon phase and stirring at 300 rpm for 2 minutes. The inversion point was defined from the measurement of emulsion conductivity and was supported by data of the droplet view under optical microscope. CdS was synthesized from reaction of Cd(NO3)2.4H2O with Na2S in phase transformed microemulsion medium. CdS cluster size was obtained from its UV-Vis spectrum and was characterized using X-ray diffraction to analyse the crystallinity and crystal system, then the influence of the variation of SDS amount to the CdS cluster size and its UV-Vis spectrum was observed.The result of this research shows that the system of n-hexane/SDS/water emulsion can be transformed from S1 to S2 type. The SDS amount in the microemulsion has influence the CdS cluster size. The larger amount of SDS added, the smaller of CdS cluster size was obtained. XRD data indicated that CdS cluster has been obtained with 40.613 % of purity. Keywords: emulsion system, nanoparticle semiconductor, CdS, sodium dodecyl sulphate

Microstructure and Hardness of Ni-Cr Porous Preform Reinforced Al-Based Composites by Low Infiltration Method

2011 ◽  
Vol 275 ◽  
pp. 251-254
Author(s):  
Hua Wei Rong ◽  
Cheol Hong Park ◽  
Won Jo Park ◽  
Han Ki Yoon
Keyword(s):  
Intermetallic Compounds ◽  
Rapid Development ◽  
High Hardness ◽  
Optical Microscope ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
Infiltration Process ◽  
Pressure Infiltration ◽  
X Ray ◽  
Infiltration Method

With the rapid development of aerospace and automobile industries, metal matrix composites (MMCs) have attracted much attention because of its excellent performance. In this paper, Ni-Cr/AC8A composites reinforced with porous Ni-Cr preform were manufactured by low pressure infiltration process, infiltration temperatures are 700oC~850oC. The microstructure and phase composition of composites were evaluated using optical microscope, X-ray diffraction (XRD) and electro-probe microanalysis (EPMA), It's found that they're intermetallic compounds generated in the composites. Recently, intermetallic compounds have attracted much attention as high-temperature material. We study the hardness of Ni-Cr/AC8A composites, the results show the Ni-Cr/AC8A composite has high hardness due to the intermetallic compounds exist.

Investigations on Physical and Mechanical Characterization of the Joints Fabricated through Microwave Hybrid Heating Method

2021 ◽  
Vol 105 ◽  
pp. 25-41
Author(s):  
Parminder Singh ◽  
D.R. Prajapati ◽  
Shankar Sehgal
Keyword(s):  
Power Level ◽  
Dissimilar Materials ◽  
Hardness Test ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Heating Method ◽  
Hybrid Heating ◽  
Microwave Hybrid Heating ◽  
Point Bend

This paper presents the current major research developments and growths in the area of microwave hybrid heating-based joining of similar and dissimilar materials. The study discusses on the different types of specimen materials, susceptor materials, fillers and microwave power level used by researchers for joining process. Comparative studies of joints using different parametric conditions are also mentioned. Physical characterization of joint has been investigated with optical microscope, scanning electron microscope, energy dispersive spectroscopy, electron probe micro analysis, X-ray diffraction and mechanically with hardness test, tensile test, 3-point bend test, impact test. Various methods for design of experiment and optimization are also used to obtain better results. Current study will facilitate the proper choice of input parameters for easy and good joints formation through the microwave hybrid heating method.

scholarly journals Visualizing mineralization processes and fossil anatomy using synchronous synchrotron X-ray fluorescence and X-ray diffraction mapping

2020 ◽  
Vol 17 (169) ◽  
pp. 20200216 ◽  
Author(s):  
Pierre Gueriau ◽  
Solenn Réguer ◽  
Nicolas Leclercq ◽  
Camila Cupello ◽  
Paulo M. Brito ◽  
...  
Keyword(s):  
Cross Sections ◽  
Soft Tissues ◽  
Local Strain ◽  
Phase Identification ◽  
X Ray Diffraction ◽  
X Ray ◽  
Area Detector ◽  
Transmission Geometry ◽  
Mineralization Processes ◽  
Elemental Data

Fossils, including those that occasionally preserve decay-prone soft tissues, are mostly made of minerals. Accessing their chemical composition provides unique insight into their past biology and/or the mechanisms by which they preserve, leading to a series of developments in chemical and elemental imaging. However, the mineral composition of fossils, particularly where soft tissues are preserved, is often only inferred indirectly from elemental data, while X-ray diffraction that specifically provides phase identification received little attention. Here, we show the use of synchrotron radiation to generate not only X-ray fluorescence elemental maps of a fossil, but also mineralogical maps in transmission geometry using a two-dimensional area detector placed behind the fossil. This innovative approach was applied to millimetre-thick cross-sections prepared through three-dimensionally preserved fossils, as well as to compressed fossils. It identifies and maps mineral phases and their distribution at the microscale over centimetre-sized areas, benefitting from the elemental information collected synchronously, and further informs on texture (preferential orientation), crystallite size and local strain. Probing such crystallographic information is instrumental in defining mineralization sequences, reconstructing the fossilization environment and constraining preservation biases. Similarly, this approach could potentially provide new knowledge on other (bio)mineralization processes in environmental sciences. We also illustrate that mineralogical contrasts between fossil tissues and/or the encasing sedimentary matrix can be used to visualize hidden anatomies in fossils.

Sign in / Sign up

Export Citation Format

Share Document