scholarly journals Graphene for Antimicrobial and Coating Application

2022 ◽  
Vol 23 (1) ◽  
pp. 499
Author(s):  
Viritpon Srimaneepong ◽  
Hans Erling Skallevold ◽  
Zohaib Khurshid ◽  
Muhammad Sohail Zafar ◽  
Dinesh Rokaya ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Biomedical Applications ◽  
Medical Technology ◽  
Graphene Layer ◽  
Web Of Science ◽  
Antimicrobial Properties ◽  
High Strength ◽  
Corrosion Prevention ◽  
Coating Application ◽  
Thermal And Electrical Properties

Graphene is a versatile compound with several outstanding properties, providing a combination of impressive surface area, high strength, thermal and electrical properties, with a wide array of functionalization possibilities. This review aims to present an introduction of graphene and presents a comprehensive up-to-date review of graphene as an antimicrobial and coating application in medicine and dentistry. Available articles on graphene for biomedical applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect. The selected articles were included in this study. Extensive research on graphene in several fields exists. However, the available literature on graphene-based coatings in dentistry and medical implant technology is limited. Graphene exhibits high biocompatibility, corrosion prevention, antimicrobial properties to prevent the colonization of bacteria. Graphene coatings enhance adhesion of cells, osteogenic differentiation, and promote antibacterial activity to parts of titanium unaffected by the thermal treatment. Furthermore, the graphene layer can improve the surface properties of implants which can be used for biomedical applications. Hence, graphene and its derivatives may hold the key for the next revolution in dental and medical technology.

Magneto-Structural and Antimicrobial Properties of Sodium Doped Lanthanum Manganite Magnetic Nanoparticles for Biomedical Applications: Influence of Silica Coating

2018 ◽  
Vol 37 ◽  
pp. 117-127 ◽  
Author(s):  
Cyril O. Ehi-Eromosele ◽  
J.A.O. Olugbuyiro ◽  
A. Edobor-Osoh ◽  
A.A. Adebisi ◽  
O.A. Bamgboye ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Magnetic Nanoparticles ◽  
Structural Properties ◽  
Biomedical Applications ◽  
Colloidal Stability ◽  
Antimicrobial Properties ◽  
Silica Coating ◽  
Coated Sample ◽  
Lanthanum Manganites ◽  
Doped Lanthanum Manganites

Coating of magnetic nanoparticles (MNPs) is usually a requirement prior to their utilization in biomedical applications. However, coating can influence the magneto-structural properties of MNPs thereby imparting their applications. The present work highlights the combustion synthesis of Na-doped lanthanum manganites (LNMO) and the influence of silica coatings on the magneto-structural properties, colloidal stability and antimicrobial properties of LNMO MNPs with their biomedical applications in mind. The crystalline perovskite structure was the same both for the bare and silica coated LNMO samples while there was a slight increase in crystallite size after coating. The FTIR spectral analysis, reduction in agglomeration of the particles and the elemental composition of the coated nanoparticles confirmed the presence of silica. The magnetization values of 34 emu/g and 29 emu/g recorded for bare and coated LNMO samples, respectively show that LNMO MNPs retained its ferromagnetic behaviour after silica coating. The pH dependent zeta potentials of the coated sample is-22.20 mV at pH 7.4 (physiological pH) and-18 mV at pH 5.0 (cell endosomal pH). Generally, silica coating reduced the antibacterial activity of the sample except forBacillussppwhere the antibacterial activity was the same with the bare sample. These results showed that while silica coating had marginal effect on the crystalline structure, size and magnetization of LNMO MNPs, it reduced the antibacterial activity of LNMO MNPs and enhanced greatly the colloidal stability of LNMO nanoparticles. Keywords: Na-doped lanthanum manganites, Silica coating, magnetic nanoparticles, biomedical applications, antimicrobial properties, colloidal stability

scholarly journals An In Vitro Study on the Antimicrobial Properties of Essential Oil Modified Resin Composite against Oral Pathogens

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4383
Author(s):  
Barbara Lapinska ◽  
Aleksandra Szram ◽  
Beata Zarzycka ◽  
Janina Grzegorczyk ◽  
Louis Hardan ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Antibacterial Activity ◽  
Antifungal Activity ◽  
Antimicrobial Agents ◽  
Resin Composite ◽  
Antimicrobial Properties ◽  
In Vitro Study ◽  
Diffusion Method ◽  
Oral Pathogens

Modifying the composition of dental restorative materials with antimicrobial agents might induce their antibacterial potential against cariogenic bacteria, e.g., S.mutans and L.acidophilus, as well as antifungal effect on C.albicans that are major oral pathogens. Essential oils (EOs) are widely known for antimicrobial activity and are successfully used in dental industry. The study aimed at evaluating antibacterial and antifungal activity of EOs and composite resin material (CR) modified with EO against oral pathogens. Ten EOs (i.e., anise, cinnamon, citronella, clove, geranium, lavender, limette, mint, rosemary thyme) were tested using agar diffusion method. Cinnamon and thyme EOs showed significantly highest antibacterial activity against S.mutans and L.acidophilus among all tested EOs. Anise and limette EOs showed no antibacterial activity against S.mutans. All tested EOs exhibited antifungal activity against C.albicans, whereas cinnamon EO showed significantly highest and limette EO significantly lowest activity. Next, 1, 2 or 5 µL of cinnamon EO was introduced into 2 g of CR and microbiologically tested. The modified CR showed higher antimicrobial activity in comparison to unmodified one. CR containing 2 µL of EO showed the best antimicrobial properties against S.mutans and C.albicans, while CR modified with 1 µL of EO showed the best antimicrobial properties against L.acidophilus.

scholarly journals Microwave-Hydrothermal Rapid Synthesis of Cellulose/Ag Nanocomposites and Their Antibacterial Activity

Nanomaterials ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 978 ◽  
Author(s):  
Lian-Hua Fu ◽  
Qing-Long Gao ◽  
Chao Qi ◽  
Ming-Guo Ma ◽  
Jun-Feng Li
Keyword(s):  
Antibacterial Activity ◽  
Antimicrobial Properties ◽  
Silver Ions ◽  
Heating Time ◽  
Diffusion Method ◽  
Dilution Method ◽  
Agar Dilution Method ◽  
Human Beings ◽  
Microwave Hydrothermal ◽  
Wide Range

Silver-based antimicrobial nanomaterials are considered as the most promising antibacterial agents owing to their outstanding antimicrobial efficacy and their relatively low toxicity to human beings. In this work, we report on a facile and environment-friendly microwave-hydrothermal method to prepare cellulose/Ag nanocomposites using hemicellulose as the reductant. The influences of the microwave-hydrothermal heating time and temperature, as well as the hemicellulose concentration on the formation of cellulose nanocomposites, were investigated in detail. Experimental results indicated that the hemicellulose was an effective reductant for silver ions, with higher temperature and longer heating time favoring the formation of silver with higher crystallinity and mass content in the nanocomposites. Moreover, the antimicrobial properties of the as-prepared cellulose/Ag nanocomposites were explored using Gram-positive S. aureus ATCC 6538 and Gram-negative E. coli HB 101 by both disc diffusion method and agar dilution method, and the nanocomposites showed excellent antibacterial activity. These results demonstrate that the as-prepared cellulose/Ag nanocomposites, as a kind of antibacterial material, are promising for applications in a wide range of biomedical fields.

scholarly journals Formulation and Evaluation of Antibacterial Creams and Gels Containing Metal Ions for Topical Application

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Mei X. Chen ◽  
Kenneth S. Alexander ◽  
Gabriella Baki
Keyword(s):  
Antibacterial Activity ◽  
Metal Ions ◽  
Copper Sulfate ◽  
Zinc Sulfate ◽  
Antimicrobial Properties ◽  
Multidrug Resistant ◽  
Synergistic Activity ◽  
Minimum Effective Concentration ◽  
Organoleptic Characteristics

Background. Skin infections occur commonly and often present therapeutic challenges to practitioners due to the growing concerns regarding multidrug-resistant bacterial, viral, and fungal strains. The antimicrobial properties of zinc sulfate and copper sulfate are well known and have been investigated for many years. However, the synergistic activity between these two metal ions as antimicrobial ingredients has not been evaluated in topical formulations. Objective. The aims of the present study were to (1) formulate topical creams and gels containing zinc and copper alone or in combination and (2) evaluate the in vitro antibacterial activity of these metal ions in the formulations. Method. Formulation of the gels and creams was followed by evaluating their organoleptic characteristics, physicochemical properties, and in vitro antibacterial activity against Escherichia coli and Staphylococcus aureus. Results. Zinc sulfate and copper sulfate had a strong synergistic antibacterial activity in the creams and gels. The minimum effective concentration was found to be 3 w/w% for both active ingredients against the two tested microorganisms. Conclusions. This study evaluated and confirmed the synergistic in vitro antibacterial effect of copper sulfate and zinc sulfate in a cream and two gels.

scholarly journals Enhanced Antibacterial Efficiency of Cellulosic Fibers: Microencapsulation and Green Grafting Strategies

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 980 ◽  
Author(s):  
Dorra Dridi ◽  
Aicha Bouaziz ◽  
Sondes Gargoubi ◽  
Abir Zouari ◽  
Fatma B’chir ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Essential Oils ◽  
Antimicrobial Properties ◽  
Cotton Fabrics ◽  
Gas Chromatography Mass Spectrometry ◽  
Wall Material ◽  
Chemical Components ◽  
Syzygium Aromaticum ◽  
Disk Diffusion Test ◽  
Cellulosic Fibers

We report an analysis of chemical components of essential oils from barks of Ceylon cinnamon and cloves of Syzygium aromaticum and an investigation of their antibacterial activity. The components of oils were determined by using Gas Chromatography/Mass Spectrometry (GC-MS) analysis, and the antimicrobial activity was assessed by the disk diffusion test. The synergic effect of essential oils mixture (cinnamon oil and clove oil) was evaluated. Antimicrobial properties were conferred to cellulosic fibers through microencapsulation using citric acid as a green binding agent. Essential oil mixture was encapsulated by coacervation using chitosan as a wall material and sodium hydroxide as a hardening agent. The diameter of the produced microcapsules varies between 12 and 48 μm. Attachment of the produced microcapsules onto cotton fabrics surface was confirmed by Attenuated Total Reflectance-Fourier Transformed Infrared (ATR-FTIR) spectroscopy, optical microscopy and Scanning Electron Microscopy (SEM) analysis. The results show that microcapsules were successfully attached on cotton fabric surfaces, imparting antibacterial activity without significantly affecting their properties. The finished cotton fabrics exhibited good mechanical properties and wettability.

scholarly journals A β-type TiNbZr alloy with low modulus and high strength for biomedical applications

2014 ◽  
Vol 24 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Qingkun Meng ◽  
Shun Guo ◽  
Qing Liu ◽  
Liang Hu ◽  
Xinqing Zhao
Keyword(s):  
Biomedical Applications ◽  
High Strength ◽  
Low Modulus

scholarly journals Novel Eco-Friendly Tannic Acid-Enriched Hydrogels-Preparation and Characterization for Biomedical Application

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4572
Author(s):  
Beata Kaczmarek ◽  
Oliwia Miłek ◽  
Marta Michalska-Sionkowska ◽  
Lidia Zasada ◽  
Marta Twardowska ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Sodium Alginate ◽  
Tannic Acid ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Activity Assay ◽  
Cell Compatibility ◽  
Gram Positive Bacteria ◽  
Biomineralization Process ◽  
Acid Release

Sodium alginate and tannic acid are natural compounds that can be mixed with each other. In this study, we propose novel eco-friendly hydrogels for biomedical applications. Thus, we conducted the following assessments including (i) observation of the structure of hydrogels by scanning electron microscope; (ii) bioerosion and the concentration of released tannic acid from subjected material; (iii) dehydrogenase activity assay to determine antibacterial activity of prepared hydrogels; and (iv) blood and cell compatibility. The results showed that hydrogels based on sodium alginate/tannic acid exert a porous structure. The immersion in simulated body fluid (SBF) results in the biomineralization process occurring on their surface while the bioerosion studies revealed that the addition of tannic acid improves hydrogels’ stability proportional to its concentration. Besides, tannic acid release concentration depends on the type of hydrogels and the highest amount was noticed for those based on sodium alginate with the content of 30% tannic acid. Antibacterial activity of hydrogels was proven for both Gram-negative and Gram-positive bacteria, the hemolysis rate was below 5% and the viability of the cells was elevated with an increasing amount of tannic acid in hydrogels. Collectively, we assume that obtained materials make the imperative to consider them for biomedical applications.

scholarly journals Sterilization Procedure for Temperature-Sensitive Hydrogels Loaded with Silver Nanoparticles for Clinical Applications

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 380 ◽  
Author(s):  
Diana Rafael ◽  
Fernanda Andrade ◽  
Francesc Martinez-Trucharte ◽  
Jana Basas ◽  
Joaquín Seras-Franzoso ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Biomedical Applications ◽  
Gelation Time ◽  
Antimicrobial Properties ◽  
High Sensitivity ◽  
Cost Effective ◽  
Raw Material ◽  
Temperature Sensitive ◽  
Dry Heat

Hydrogels (HG) have recognized benefits as drug delivery platforms for biomedical applications. Their high sensitivity to sterilization processes is however one of the greatest challenges regarding their clinical translation. Concerning infection diseases, prevention of post-operatory related infections is crucial to ensure appropriate patient recovery and good clinical outcomes. Silver nanoparticles (AgNPs) have shown good antimicrobial properties but sustained release at the right place is required. Thus, we produced and characterized thermo-sensitive HG based on Pluronic® F127 loaded with AgNPs (HG-AgNPs) and their integrity and functionality after sterilization by dry-heat and autoclave methods were carefully assessed. The quality attributes of HG-AgNPs were seriously affected by dry-heat methods but not by autoclaving methods, which allowed to ensure the required sterility. Also, direct sterilization of the final HG-AgNPs product proved more effective than of the raw material, allowing simpler production procedures in non-sterile conditions. The mechanical properties were assessed in post mortem rat models and the HG-AgNPs were tested for its antimicrobial properties in vitro using extremely drug-resistant (XDR) clinical strains. The produced HG-AgNPs prove to be versatile, easy produced and cost-effective products, with activity against XDR strains and an adequate gelation time and spreadability features and optimal for in situ biomedical applications.

A Review on Antimicrobial Properties of Metal Nanoparticles

2020 ◽  
Vol 20 (6) ◽  
pp. 3303-3339 ◽  
Author(s):  
Saee Gharpure ◽  
Aman Akash ◽  
Balaprasad Ankamwar
Keyword(s):  
Titanium Dioxide ◽  
Metal Oxide ◽  
Biomedical Applications ◽  
Antimicrobial Agents ◽  
Metal Oxide Nanoparticles ◽  
Antimicrobial Properties ◽  
Multidrug Resistant ◽  
Oxide Nanoparticles ◽  
Synthesis Methods ◽  
Micro Organisms

The field of nanotechnology elaborates the synthesis, characterization as well as application of nanomaterials. Applications of nanoparticles in various fields have interested scientists since decades due to its unique properties. Combination of pharmacology with nanotechnology has helped in development of newer antimicrobial agents in order to control the ever increasing multidrug resistant micro-organisms. Properties of metal and metal oxide nanoparticles like silver, gold, titanium dioxide as well as magnesium oxide as antimicrobial agents are very well known. This review elaborates synthesis methods and antimicrobial mechanisms of various metal as well as metal oxide nanoparticles for better understanding in order to utilize their potentials in various biomedical applications.

Sign in / Sign up

Export Citation Format

Share Document