scholarly journals Influence of the Miniaturisation Effect on the Effective Stiffness of Lattice Structures in Additive Manufacturing

Metals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1442
Author(s):  
Guillaume Meyer ◽  
Florian Brenne ◽  
Thomas Niendorf ◽  
Christian Mittelstedt
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Mechanical Performance ◽  
Effective Properties ◽  
Weight Ratio ◽  
Effective Stiffness ◽  
Analytical Models ◽  
Lattice Structures ◽  
Thin Walled ◽  
The Impact

Thin-walled and cellular structures are characterised by superior lightweight potential due to their advantageous stiffness to weight ratio. They find particular interest in the field of additive manufacturing due to robust and reproducible manufacturability. However, the mechanical performance of such structures strongly depends on the manufacturing process and resultant geometrical imperfections such as porosity, deviations in strut thickness or surface roughness, for which an understanding of their influence is crucially needed. So far, many authors conducted empirical investigations, while analytical methods are rarely applied. In order to obtain efficient design rules considering both mechanical properties and process induced characteristics, analytical descriptions are desirable though. Available analytical models for the determination of effective properties are mostly based on the simple advancement of beam theories, mostly ignoring manufacturing characteristics that, however, strongly influence the mechanical properties of additive manufactured thin-walled structures. One example is the miniaturisation effect, a microstructural effect that has been identified as one of the main drivers of the effective elasto-plastic properties of lightweight structures processed by additive manufacturing. The current work highlights the need to quantify further microstructural effects and to encourage combining them into mesostructural approaches in order to assess macrostructural effective properties. This multi-scale analysis of lattice structures is performed through a comparison between effective stiffness calculated through an analytical approach and compression tests of lattice structures, coupled with an investigation of the arrangement of their struts. In order to cover different potential loading scenarios, bending-dominated and stretch-dominated lattice structures made of the commonly used materials 316L and Ti6Al4V are considered, whereby the impact of microstructural phase transformation during processing is taken into account.

scholarly journals Investigation and Statistical Modeling of the Mechanical Properties of Additively Manufactured Lattices

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3962
Author(s):  
Derek G. Spear ◽  
Anthony N. Palazotto
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Design Parameters ◽  
Statistical Experimental Design ◽  
Lattice Structures ◽  
Compression Tests ◽  
Static Compression ◽  
Interaction Terms ◽  
Cell Densities ◽  
The Impact

This paper describes the background, test methodology, and experimental results associated with the testing and analysis of quasi-static compression testing of additively manufactured open-cell lattice structures. The study aims to examine the effect of lattice topology, cell size, cell density, and surface thickness on the mechanical properties of lattice structures. Three lattice designs were chosen, the Diamond, I-WP, and Primitive Triply Periodic Minimal Surfaces (TPMSs). Uniaxial compression tests were conducted for every combination of the three lattice designs, three cell sizes, three cell densities, and three surface thicknesses. In order to perform an efficient experiment and gain the most information possible, a four-factor statistical experimental design was planned and followed throughout testing. A full four-factor statistical model was produced, along with a reduced interactions model, separating the model by the significance of each factor and interaction terms. The impact of each factor was analyzed and interpreted from the resulting data, and then conclusions were made about the effects of the design parameters on the resultant mechanical performance.

Extending High Value Components Performances with Additive Manufacturing: Application to Naval Applications

2021 ◽  
Vol 319 ◽  
pp. 58-62
Author(s):  
Matthieu Rauch ◽  
Gatien Pechet ◽  
Jean Yves Hascoet ◽  
Guillaume Ruckert
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Electric Arc ◽  
Lattice Structures ◽  
Propeller Blade ◽  
The Many ◽  
Metallic Parts ◽  
The Impact ◽  
Wire Arc Additive Manufacturing

Additive Manufacturing (AM), consists of depositing material in successive layers to obtain the desired part. The parts produced by AM can thus adopt geometries inaccessible by conventional manufacturing means, for example hollow or lattice structures which considerably reduce their weight while keeping or even improving their mechanical properties. Among the many existing processes, Wire Arc Additive Manufacturing (WAAM) is particularly well suited to the manufacture of large metallic parts. It is characterized by a supply of heat in the form of an electric arc (produced by a welding generator) and a supply of material in the form of wire. This paper will discuss the impact of additive manufacturing to enhance the performances of high value components, based on naval application: the manufacturing of a hollow propeller blade demonstrator of 1.5 m high realized in the laboratory.

Mechanical performance of additively manufactured uniform and graded porous structures based on topology-optimized unit cells

2020 ◽  
pp. 095440622094711
Author(s):  
Mohsen Teimouri ◽  
Masoud Asgari
Keyword(s):  
Mechanical Properties ◽  
Energy Absorption ◽  
Mechanical Performance ◽  
Functionally Graded ◽  
Geometrical Parameters ◽  
Lattice Structures ◽  
Shell Type ◽  
Two Samples ◽  
Unit Cells ◽  
Thin Walled

A topology optimization (TO) method is used to develop new and efficient unit cells to be used in additively manufactured porous lattice structures. Two types of unit cells including solid and thin-walled shell-type ones are introduced for generating the desired regular and functionally graded (FG) lattice structures. To evaluate structural stiffness and crushing behavior of the proposed lattice structures, their mechanical properties, and energy absorption parameters have been calculated through implementing finite element (FE) simulations on them. To validate the simulations, two samples were fabricated by a stereolithography (SLA) machine. Besides, the effects of geometrical parameters and optimizing scheme of the unit cells on the mechanical properties of the proposed structures are studied. Consequently, energy absorption parameters have been calculated and compared for both the solid and thin-walled lattice structures to evaluate their ability in energy absorption. It was found in general that for the solid lattice structures, the mechanical properties, and the crushing parameters are directly affected by porosity though in shell-type ones superior mechanical properties could be achieved even for a smaller proportion of material usage.

Effect of toughened polyamide-coated carbon fiber fabric on the mechanical performance and fracture toughness of CFRP

2021 ◽  
pp. 002199832199945
Author(s):  
Jong H Eun ◽  
Bo K Choi ◽  
Sun M Sung ◽  
Min S Kim ◽  
Joon S Lee
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Photoelectron Spectroscopy ◽  
Mechanical Performance ◽  
Epoxy Composites ◽  
Scanning Calorimetry ◽  
Internal Damage ◽  
Impact Tests ◽  
Flexural Tests ◽  
The Impact

In this study, carbon/epoxy composites were manufactured by coating with a polyamide at different weight percentages (5 wt.%, 10 wt.%, 15 wt.%, and 20 wt.%) to improve their impact resistance and fracture toughness. The chemical reaction between the polyamide and epoxy resin were examined by fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray photoelectron spectroscopy. The mechanical properties and fracture toughness of the carbon/epoxy composites were analyzed. The mechanical properties of the carbon/epoxy composites, such as transverse flexural tests, longitudinal flexural tests, and impact tests, were investigated. After the impact tests, an ultrasonic C-scan was performed to reveal the internal damage area. The interlaminar fracture toughness of the carbon/epoxy composites was measured using a mode I test. The critical energy release rates were increased by 77% compared to the virgin carbon/epoxy composites. The surface morphology of the fractured surface was observed. The toughening mechanism of the carbon/epoxy composites was suggested based on the confirmed experimental data.

scholarly journals Electron Beam Melting of Ti-6Al-4V Lattice Structures; Correlation between Post Heat Treatment and Mechanical Properties

2021 ◽  
Author(s):  
Giuseppe Del Guercio ◽  
Manuela Galati ◽  
Abdollah Saboori
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Computer Aided Design ◽  
Mechanical Performance ◽  
Industrial Applications ◽  
Heat Treatments ◽  
Layer By Layer ◽  
Lattice Structures ◽  
Heat Treated ◽  
Aided Design

Abstract Additive Manufacturing processes are considered advanced manufacturing methods. It would be possible to produce complex shape components from a Computer-Aided Design model in a layer-by-layer manner. Lattice structures as one of the complex geometries could attract lots of attention for both medical and industrial applications. In these structures, besides cell size and cell type, the microstructure of lattice structures can play a key role in these structures' mechanical performance. On the other hand, heat treatment has a significant influence on the mechanical properties of the material. Therefore, in this work, the effect of the heat treatments on the microstructure and mechanical behaviour of Ti-6Al-4V lattice structures manufactured by EBM was analyzed. The main mechanical properties were compared with the Ashby and Gibson model. It is very interesting to notice that a more homogeneous failure mode was found for the heat-treated samples. The structures' relative density was the main factor influencing their mechanical performance of the heat-treated samples. It is also found that the heat treatments were able to preserve the stiffness and the compressive strength of the lattice structures. Besides, an increment of both the elongation at failure and the absorbed energy was obtained after the heat treatments. Microstructure analysis of the heat-treated samples confirms the increment of ductility of the heat-treated samples with respect to the as-built one.

Microstructural and Mechanical Properties of a Solid-State Additive Manufactured Magnesium Alloy

2021 ◽  
pp. 1-21
Author(s):  
Thomas Robinson ◽  
Malcolm Williams ◽  
Harish Rao ◽  
Ryan P. Kinser ◽  
Paul Allison ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Solid State ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Process Parameters ◽  
Weight Ratio ◽  
Structural Components ◽  
Friction Stir ◽  
Magnesium Alloy Az31b

Abstract In recent years, additive manufacturing (AM) has gained prominence in rapid prototyping and production of structural components with complex geometries. Magnesium alloys, whose strength-to-weight ratio is superior compared to steel and aluminum alloys, have shown potential in lightweighting applications. However, commercial beam-based AM technologies have limited success with magnesium alloys due to vaporization and hot cracking. Therefore, as an alternative approach, we propose the use of a near net-shape solid-state additive manufacturing process, Additive Friction Stir Deposition (AFSD), to fabricate magnesium alloys in bulk. In this study, a parametric investigation was performed to quantify the effect of process parameters on AFSD build quality including volumetric defects and surface quality in magnesium alloy AZ31B. In order to understand the effect of the AFSD process on structural integrity in the magnesium alloy AZ31B, in-depth microstructure and mechanical property characterization was conducted on a bulk AFSD build fabricated with a set of acceptable process parameters. Results of the microstructure analysis of the as-deposited AFSD build revealed bulk microstructure similar to wrought magnesium alloy AZ31 plate. Additionally, similar hardness measurements were found in AFSD build compared to control wrought specimens. While tensile test results of the as-deposited AFSD build exhibited a 20 percent drop in yield strength, nearly identical ultimate strength was observed compared to the wrought control. The experimental results of this study illustrate the potential of using the AFSD process to additively manufacture Mg alloys for load bearing structural components with achieving wrought-like microstructure and mechanical properties.

On the manufacturability of Inconel 718 thin-walled honeycomb structures by laser powder bed fusion

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
José M. Zea Pérez ◽  
Jorge Corona-Castuera ◽  
Carlos Poblano-Salas ◽  
John Henao ◽  
Arturo Hernández Hernández
Keyword(s):  
Mechanical Properties ◽  
Inconel 718 ◽  
Dimensional Accuracy ◽  
Honeycomb Lattice ◽  
Lattice Structures ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Thin Walled

Purpose The purpose of this paper is to study the effects of printing strategies and processing parameters on wall thickness, microhardness and compression strength of Inconel 718 superalloy thin-walled honeycomb lattice structures manufactured by laser powder bed fusion (L-PBF). Design/methodology/approach Two printing contour strategies were applied for producing thin-walled honeycomb lattice structures in which the laser power, contour path, scanning speed and beam offset were systematically modified. The specimens were analyzed by optical microscopy for dimensional accuracy. Vickers hardness and quasi-static uniaxial compression tests were performed on the specimens with the least difference between the design wall thickness and the as built one to evaluate their mechanical properties and compare them with the counterparts obtained by using standard print strategies. Findings The contour printing strategies and process parameters have a significant influence on reducing the fabrication time of thin-walled honeycomb lattice structures (up to 50%) and can lead to improve the manufacturability and dimensional accuracy. Also, an increase in the young modulus up to 0.8 times and improvement in the energy absorption up to 48% with respect to those produced by following a standard strategy was observed. Originality/value This study showed that printing contour strategies can be used for faster fabrication of thin-walled lattice honeycomb structures with similar mechanical properties than those obtained by using a default printing strategy.

scholarly journals Characterisation of a High-Performance Al–Zn–Mg–Cu Alloy Designed for Wire Arc Additive Manufacturing

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1610 ◽  
Author(s):  
Paulo J. Morais ◽  
Bianca Gomes ◽  
Pedro Santos ◽  
Manuel Gomes ◽  
Rudolf Gradinger ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Additive Manufacturing ◽  
High Performance ◽  
Mechanical Performance ◽  
Fluorescence Analysis ◽  
Cold Metal Transfer ◽  
Direction Parallel ◽  
X Ray ◽  
Wire Arc Additive Manufacturing

Ever-increasing demands of industrial manufacturing regarding mechanical properties require the development of novel alloys designed towards the respective manufacturing process. Here, we consider wire arc additive manufacturing. To this end, Al alloys with additions of Zn, Mg and Cu have been designed considering the requirements of good mechanical properties and limited hot cracking susceptibility. The samples were produced using the cold metal transfer pulse advanced (CMT-PADV) technique, known for its ability to produce lower porosity parts with smaller grain size. After material simulations to determine the optimal heat treatment, the samples were solution heat treated, quenched and aged to enhance their mechanical performance. Chemical analysis, mechanical properties and microstructure evolution were evaluated using optical light microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence analysis and X-ray radiography, as well as tensile, fatigue and hardness tests. The objective of this research was to evaluate in detail the mechanical properties and microstructure of the newly designed high-performance Al–Zn-based alloy before and after ageing heat treatment. The only defects found in the parts built under optimised conditions were small dispersed porosities, without any visible cracks or lack of fusion. Furthermore, the mechanical properties are superior to those of commercial 7xxx alloys and remarkably independent of the testing direction (parallel or perpendicular to the deposit beads). The presented analyses are very promising regarding additive manufacturing of high-strength aluminium alloys.

Sign in / Sign up

Export Citation Format

Share Document