scholarly journals Review on the Influence of Temperature upon Hydrogen Effects in Structural Alloys

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 423
Author(s):  
Thorsten Michler ◽  
Frank Schweizer ◽  
Ken Wackermann
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Temperature Effect ◽  
Statistical Approach ◽  
Austenitic Stainless Steels ◽  
Carbon Steels ◽  
Effect Of Temperature ◽  
Engineering Applications ◽  
Selection For ◽  
Typical Temperature

It is well-documented experimentally that the influence of hydrogen on the mechanical properties of structural alloys like austenitic stainless steels, nickel superalloys, and carbon steels strongly depends on temperature. A typical curve plotting any hydrogen-affected mechanical property as a function of temperature gives a temperature THE,max, where the degradation of this mechanical property reaches a maximum. Above and below this temperature, the degradation is less. Unfortunately, the underlying physico-mechanical mechanisms are not currently understood to the level of detail required to explain such temperature effects. Though this temperature effect is important to understand in the context of engineering applications, studies to explain or even predict the effect of temperature upon the mechanical properties of structural alloys could not be identified. The available experimental data are scattered significantly, and clear trends as a function of chemistry or microstructure are difficult to see. Reported values for THE,max are in the range of about 200–340 K, which covers the typical temperature range for the design of structural components of about 230–310 K (from −40 to +40 °C). That is, the value of THE,max itself, as well as the slope of the gradient, might affect the materials selection for a dedicated application. Given the current lack of scientific understanding, a statistical approach appears to be a suitable way to account for the temperature effect in engineering applications. This study reviews the effect of temperature upon hydrogen effects in structural alloys and proposes recommendations for test temperatures for gaseous hydrogen applications.

Application of Physical Simulation for Developing New Steel Types

2008 ◽  
Vol 575-578 ◽  
pp. 1002-1007 ◽  
Author(s):  
L. Pentti Karjalainen ◽  
Mahesh C. Somani ◽  
Atef S. Hamada
Keyword(s):  
Mechanical Properties ◽  
Stainless Steels ◽  
Physical Simulation ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Carbon Steels ◽  
Austenitic Steels ◽  
Low Carbon ◽  
Modelling Studies ◽  
Electron Microscopes

Processing of a large number of novel steel types, such as DP, TRIP, CP and TWIP, and high-strength low-carbon bainitic and martensitic DQ-T steels, have been developed based on physical simulation and modelling studies. Among stainless steels, guidelines for processing of ultra-fine grained austenitic stainless steels have been created. Physical simulation has been used by employing a Gleeble thermo-mechanical simulator to reveal the phenomena occurring in the hot rolling stage (the flow resistance, recrystallization kinetics and microstructure evolution), and in the cooling stage (CCT diagrams) for carbon steels and in short-term annealing of cold rolled metastable austenitic steels. Connecting these data with microstructures examined in optical and electron microscopes and resultant mechanical properties have improved the understanding on complex phenomena occurring in the processing of these steels and the role of numerous process variables in the optimization of enhanced mechanical properties.

scholarly journals Temperature Effect on Mechanical Properties and Damage Identification of Concrete Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Yubo Jiao ◽  
Hanbing Liu ◽  
Xianqiang Wang ◽  
Yuwei Zhang ◽  
Guobao Luo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Temperature Effect ◽  
Modulus Of Elasticity ◽  
Damage Identification ◽  
Coupling Effect ◽  
Concrete Slab ◽  
Splitting Tensile Strength ◽  
Effect Of Temperature

Static and dynamic mechanical properties of concrete are affected by temperature effect in practice. Therefore, it is necessary to investigate the corresponding influence law and mechanism. This paper demonstrates the variation of mechanical properties of concrete at temperatures from −20°C to 60°C. Temperature effects on cube compressive strength, splitting tensile strength, prism compressive strength, modulus of elasticity, and frequency are conducted and discussed. The results indicate that static mechanical properties such as compressive strength (cube and prism), splitting tensile strength, and modulus of elasticity have highly linear negative correlation with temperature; this law is also applied to the first order frequency of concrete slab. The coupling effect of temperature and damage on change rate of frequency reveals that temperature effect cannot be ignored in damage identification of structure. Mechanism analysis shows that variation of elastic modulus of concrete caused by temperature is the primary reason for the change of frequency.

Evaluation of Mechanical Property of Friction Welded EN24 Steel Joints

2014 ◽  
Vol 591 ◽  
pp. 108-111 ◽  
Author(s):  
M. Martin Charles ◽  
A. Gnanavelbabu ◽  
K. Rajkumar
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Tensile Strength ◽  
Friction Welding ◽  
Low Cost ◽  
Dissimilar Materials ◽  
High Tensile Strength ◽  
Engineering Applications ◽  
Friction Pressure ◽  
Steel Joints

EN24 steel is widely used in many engineering applications such as shaft, axle and fasteners due to high tensile strength and low cost. Friction welding is generally used to join the similar and dissimilar materials. The present work investigates on the mechanical properties of friction welded EN 24 steel joints. The effects of the four main parameters: friction duration, forging time, friction pressure and forging pressure on the mechanical properties of the weld such as hardness and axial shortening are studied experimentally and analyzed using ANOVA statistics.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

Effect of nickel on formation of transition layer during liquid-phase aluminizing of titanium

2020 ◽  
pp. 313-317
Author(s):  
A.I. Kovtunov ◽  
Yu.Yu. Khokhlov ◽  
S.V. Myamin
Keyword(s):  
Mechanical Properties ◽  
Liquid Phase ◽  
Intermetallic Layer ◽  
Reaction Diffusion ◽  
Strength Properties ◽  
Effect Of Temperature ◽  
Nickel Concentration ◽  
Aluminum Melt ◽  
Titanium Aluminum ◽  
Titanium Foam

Titanium—aluminum, titanium—foam aluminum composites and bimetals obtained by liquid-phase methods, are increasingly used in industry. At the liquid-phase methods as result of the reaction diffusion of titanium and aluminum is formed transitional intermetallic layer at the phase boundary of the composite, which reduces the mechanical properties of titanium and composite. To reduce the growth rate of the intermetallic layer between the layers of the composite and increase its mechanical properties, it is proposed to alloy aluminum melt with nickel. The studies of the interaction of titanium and molten aluminum alloyed with nickel made it possible to establish the effect of temperature and aluminizing time on the thickness, chemical and phase compositions of the transition intermetallic layer. The tests showed the effect of the temperature of the aluminum melt, the nickel concentration on the strength properties of titanium—aluminum bimetal.

Mechanical Property Studies on Flax Fiber Reinforced Basalt Powder Filled Polyester Composite

2020 ◽  
Vol 13 ◽  
Author(s):  
V. Arumugaprabu ◽  
K.Arun Prasath ◽  
S. Mangaleswaran ◽  
M. Manikanda Raja ◽  
R. Jegan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Natural Fiber ◽  
Tensile Load ◽  
Flax Fiber ◽  
Flexural Properties ◽  
Weight Percentage ◽  
Tensile Impact ◽  
Polyester Composite ◽  
Additional Support

: The objective of this research is to evaluate the tensile, impact and flexural properties of flax fiber and basalt powder filled polyester composite. Flax fiber is one of the predominant reinforcement natural fiber which possess good mechanical properties and addition of basalt powder as a filler provides additional support to the composite. The Composites are prepared using flax fiber arranged in 10 layers with varying weight percentage of the basalt powder as 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.% and 30 wt.% respectively. From the results it is inferred that the composite combination 10 Layers of flax / 5 wt.%, basalt Powder absorbs more tensile load of 145 MPa. Also, for the same combination maximum flexural strength is about 60 MPa. Interestingly in the case of impact strength more energy was absorbed by 10 layers of flax and 30 wt.% of basalt powder. In addition, the failure mechanism of the composites also discussed briefly using SEM studies.

Temperature Effect on the Two-Dimensional Phase Transition Kinetics of Adenine Adsorbed at the Hg Electrode/Aqueous Solution Interface

2003 ◽  
Vol 68 (8) ◽  
pp. 1407-1419 ◽  
Author(s):  
Claudio Fontanesi ◽  
Roberto Andreoli ◽  
Luca Benedetti ◽  
Roberto Giovanardi ◽  
Paolo Ferrarini
Keyword(s):  
Phase Transition ◽  
Aqueous Solution ◽  
Phase Change ◽  
Temperature Effect ◽  
Transition Rate ◽  
Effect Of Temperature ◽  
Two Dimensional ◽  
Solution Interface ◽  
Phase Transition Kinetics ◽  
Kinetics Of

The kinetics of the liquid-like → solid-like 2D phase transition of adenine adsorbed at the Hg/aqueous solution interface is studied. Attention is focused on the effect of temperature on the rate of phase change; an increase in temperature is found to cause a decrease of transition rate.

scholarly journals Regulating Effect of Cement Accelerator on High Content Solid-Wastes Autoclaved Aerated Concrete (HCS-AAC) Slurry Performance and Subsequent Influence

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 799
Author(s):  
Dingkun Xie ◽  
Lixiong Cai ◽  
Jie Wang
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Solid Wastes ◽  
Hydration Products ◽  
Promoting Effect ◽  
Adverse Side Effects ◽  
Foaming Process ◽  
Carbide Slag ◽  
Negative Effect ◽  
Aerated Concrete

Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile, the affiliated effects on the physical-mechanical properties and hydration products were discussed to evaluate the applicability and influence of the cement accelerator. The hydration products were characterized by mineralogical (XRD) and thermal analysis (DSC-TG). The results indicated that substituting carbide slag for quicklime retarded slurry foaming and curing progress; meanwhile, the induced mechanical property declination had a negative effect on the generation of C–S–H (I) and tobermorite. Na2SO4 and Na2O·2.0SiO2 can effectively accelerate the slurry foaming rate, but the promoting effect on slurry thickening was inconspicuous. The compressive strength of HCS-AAC obviously declined with increasing cement coagulant content, which was mainly ascribed to the decrease in bulk density caused by the accelerating effect on the slurry foaming process. Dosing Na2SO4 under 0.4% has little effect on the generation of strength contributing to hydration products while the addition of Na2O·2.0SiO2 can accelerate the generation and crystallization of C–S–H, which contributed to the high activity gelatinous SiO2 generated from the reaction between Na2O·2.0SiO2 and Ca(OH)2.

Sign in / Sign up

Export Citation Format

Share Document