scholarly journals Influence of Spatial Dispersion on the Electromagnetic Properties of Magnetoplasmonic Nanostructures

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3297
Author(s):  
Yuri Eremin ◽  
Vladimir Lopushenko
Keyword(s):  
Spatial Dispersion ◽  
Tumor Imaging ◽  
Quantum Effect ◽  
Wavelength Region ◽  
Electromagnetic Energy ◽  
Electromagnetic Properties ◽  
Energy Concentration ◽  
Gold Shell ◽  
The Core ◽  
The Impact

Magnetoplasmonics based on composite nanostructures is widely used in many biomedical applications. Nanostructures, consisting of a magnetic core and a gold shell, exhibit plasmonic properties, that allow the concentration of electromagnetic energy in ultra-small volumes when used, for example, in imaging and therapy. Magnetoplasmonic nanostructures have become an indispensable tool in nanomedicine. The gold shell protects the core from oxidation and corrosion, providing a biocompatible platform for tumor imaging and cancer treatment. By adjusting the size of the core and the shell thickness, the maximum energy concentration can be shifted from the ultraviolet to the near infrared, where the depth of light penetration is maximum due to low scattering and absorption by tissues. A decrease in the thickness of the gold shell to several nanometers leads to the appearance of the quantum effect of spatial dispersion in the metal. The presence of the quantum effect can cause both a significant decrease in the level of energy concentration by plasmon particles and a shift of the maxima to the short-wavelength region, thereby reducing the expected therapeutic effect. In this study, to describe the influence of the quantum effect of spatial dispersion, we used the discrete sources method, which incorporates the generalized non-local optical response theory. This approach made it possible to account for the influence of the nonlocal effect on the optical properties of composite nanoparticles, including the impact of the asymmetry of the core-shell structure on the energy characteristics. It was found that taking spatial dispersion into account leads to a decrease in the maximum value of the concentration of electromagnetic energy up to 25%, while the blue shift can reach 15 nm.

scholarly journals Влияние пространственной дисперсии в металлах на оптические характеристики биметаллических плазмонных наночастиц

2021 ◽  
Vol 129 (8) ◽  
pp. 1079
Author(s):  
Ю.А. Еремин
Keyword(s):  
Cross Section ◽  
Absorption Cross Section ◽  
Spatial Dispersion ◽  
Wavelength Region ◽  
Absorption Cross ◽  
Electromagnetic Plane Wave ◽  
Discrete Sources Method ◽  
The Core ◽  
Plane Wave Field ◽  
Electromagnetic Plane

The problem of diffraction of an electromagnetic plane wave field on a core-shell nanoparticle composed of two plasmon metals is considered. The effect of spatial dispersion in metals on the absorption cross section is investigated on the basis of the Discrete Sources method. Various combinations of core and shell metals: Au@Ag and Ag@Au of spheroidal particles, as well as the effect of elongation and asymmetry of particle geometry on energy absorption are being studied. It was found that taking into account the spatial dispersion, both in the core and in the shell, leads to a significant decrease in the absorption cross section and a shift of the plasmon resonance to the shorter wavelength region.

Soziale Disziplinierung im flexiblen Kapitalismus

2004 ◽  
Vol 34 (136) ◽  
pp. 339-356
Author(s):  
Tobias Wölfle ◽  
Oliver Schöller
Keyword(s):  
Social Welfare ◽  
Second Step ◽  
Social Rights ◽  
Federal Law ◽  
Capitalist Development ◽  
The Core ◽  
The Past ◽  
The Impact ◽  
Municipal Level

Under the term “Hilfe zur Arbeit” (aid for work) the federal law of social welfare subsumes all kinds of labour disciplining instruments. First, the paper shows the historical connection of welfare and labour disciplining mechanisms in the context of different periods within capitalist development. In a second step, against the background of historical experiences, we will analyse the trends of “Hilfe zur Arbeit” during the past two decades. It will be shown that by the rise of unemployment, the impact of labour disciplining aspects of “Hilfe zur Arbeit” has increased both on the federal and on the municipal level. For this reason the leverage of the liberal paradigm would take place even in the core of social rights.

Citizen Deliberation Online

2019 ◽  
pp. 689-712
Author(s):  
Patrícia Rossini ◽  
Jennifer Stromer-Galley
Keyword(s):  
Political Engagement ◽  
Future Research ◽  
The Internet ◽  
Digital Platforms ◽  
The Core ◽  
Political Conversation ◽  
Political Talk ◽  
Citizen Deliberation ◽  
The Impact

Political conversation is at the heart of democratic societies, and it is an important precursor of political engagement. As society has become intertwined with the communication infrastructure of the Internet, we need to understand its uses and the implications of those uses for democracy. This chapter provides an overview of the core topics of scholarly concern around online citizen deliberation, focusing on three key areas of research: the standards of quality of communication and the normative stance on citizen deliberation online; the impact and importance of digital platforms in structuring political talk; and the differences between formal and informal political talk spaces. After providing a critical review of these three major areas of research, we outline directions for future research on online citizen deliberation.

Static and dynamic response of sandwich beams with lattice and pantographic cores

2021 ◽  
pp. 109963622110338
Author(s):  
Yury Solyaev ◽  
Arseniy Babaytsev ◽  
Anastasia Ustenko ◽  
Andrey Ripetskiy ◽  
Alexander Volkov
Keyword(s):  
Mechanical Performance ◽  
Lattice Structure ◽  
Unit Length ◽  
Experimental Tests ◽  
Plane Geometry ◽  
Sandwich Beams ◽  
Static Tests ◽  
Three Point Bending ◽  
The Core ◽  
The Impact

Mechanical performance of 3d-printed polyamide sandwich beams with different type of the lattice cores is investigated. Four variants of the beams are considered, which differ in the type of connections between the elements in the lattice structure of the core. We consider the pantographic-type lattices formed by the two families of inclined beams placed with small offset and connected by stiff joints (variant 1), by hinges (variant 2) and made without joints (variant 3). The fourth type of the core has the standard plane geometry formed by the intersected beams lying in the same plane (variant 4). Experimental tests were performed for the localized indentation loading according to the three-point bending scheme with small span-to-thickness ratio. From the experiments we found that the plane geometry of variant 4 has the highest rigidity and the highest load bearing capacity in the static tests. However, other three variants of the pantographic-type cores (1–3) demonstrate the better performance under the impact loading. The impact strength of such structures are in 3.5–5 times higher than those one of variant 4 with almost the same mass per unit length. This result is validated by using numerical simulations and explained by the decrease of the stress concentration and the stress state triaxiality and also by the delocalization effects that arise in the pantographic-type cores.

Comparative crosstalk performance analysis of different configurations of heterogeneous multicore fiber

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Umar Farooque ◽  
Rakesh Ranjan
Keyword(s):  
Refractive Index ◽  
Mode Coupling ◽  
The Other ◽  
Heterogeneous Multicore ◽  
Coupled Mode ◽  
The Core ◽  
Bending Radius ◽  
Multicore Fiber ◽  
The Impact ◽  
Core Pitch

AbstractIn order to select the heterogeneous multicore fiber (MCF) configuration with ultra-low crosstalk and low peak bending radius, comparative crosstalk analysis have been done for the three possible core configurations, namely, Configuration 1 - different refractive index (R.I.) and different radius, Configuration 2 - different R.I., and Configuration 3 - different radius. Using the coupled mode equation and the simplified expressions of mode coupling coefficient (MCC) for different configurations of heterogeneous cores, the crosstalk performance of all the heterogeneous MCF configurations along with the homogeneous MCF have been investigated analytically with respect to core pitch (D) and fiber bending radius (${R}_{b}$). Further, these expressions of MCC have been extended to obtain the simplified expressions of MCC for the estimation of crosstalk levels in respective trench-assisted (TA) heterogeneous MCF configurations. It is observed from the analysis that in Configuration 1, crosstalk level is lowest and the rate of decrease in the crosstalk with respect to the core pitch is highest compared to the other configurations of heterogeneous MCF. The values of crosstalk obtained analytically have been validated by comparing it with the values obtained from finite element method (FEM) based numerical simulation results. Further, we have investigated the impact of a fixed percent change (5%) in the core parameters (radius and/or R.I.) of one of the core of a homogeneous MCF, to realize the different heterogeneous MCF configurations, on the variations in crosstalk levels, difference in the mode effective refractive index of the core 1 and core 2 ($\Delta {n}_{eff}={n}_{eff1}-{n}_{eff2}$), and the peak bending radius (${R}_{pk}$). For the same percent variations (5%) in the core parameters (radius and/or R.I.) of different configurations of cores (Config. 1-Config. 3), Config. 1 MCF has highest variation in $\Delta {n}_{eff}$ value compared to other configurations of MCF. Further, this highest variation in $\Delta {n}_{eff}$ value of Config. 1 MCF results in smallest peak bending radius. The smaller value of peak bending radius allows MCF to bend into smaller radius. Therefore, Configuration 1 is the potential choice for the design of MCF with smaller peak bending radius and ultra-low crosstalk level compared to the other configurations of SI-heterogeneous MCF.

scholarly journals Radiopharmaceutical and Eu3+ doped gadolinium oxide nanoparticles mediated triple-excited fluorescence imaging and image-guided surgery

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Xiaojing Shi ◽  
Caiguang Cao ◽  
Zeyu Zhang ◽  
Jie Tian ◽  
Zhenhua Hu
Keyword(s):  
Fluorescent Probes ◽  
Signal Intensity ◽  
Tumor Imaging ◽  
Tumor Resection ◽  
Optical Signal ◽  
Gadolinium Oxide ◽  
Image Guided Surgery ◽  
Guided Surgery ◽  
Image Guided ◽  
The Impact

AbstractCerenkov luminescence imaging (CLI) is a novel optical imaging technique that has been applied in clinic using various radionuclides and radiopharmaceuticals. However, clinical application of CLI has been limited by weak optical signal and restricted tissue penetration depth. Various fluorescent probes have been combined with radiopharmaceuticals for improved imaging performances. However, as most of these probes only interact with Cerenkov luminescence (CL), the low photon fluence of CL greatly restricted it’s interaction with fluorescent probes for in vivo imaging. Therefore, it is important to develop probes that can effectively convert energy beyond CL such as β and γ to the low energy optical signals. In this study, a Eu3+ doped gadolinium oxide (Gd2O3:Eu) was synthesized and combined with radiopharmaceuticals to achieve a red-shifted optical spectrum with less tissue scattering and enhanced optical signal intensity in this study. The interaction between Gd2O3:Eu and radiopharmaceutical were investigated using 18F-fluorodeoxyglucose (18F-FDG). The ex vivo optical signal intensity of the mixture of Gd2O3:Eu and 18F-FDG reached 369 times as high as that of CLI using 18F-FDG alone. To achieve improved biocompatibility, the Gd2O3:Eu nanoparticles were then modified with polyvinyl alcohol (PVA), and the resulted nanoprobe PVA modified Gd2O3:Eu (Gd2O3:Eu@PVA) was applied in intraoperative tumor imaging. Compared with 18F-FDG alone, intraoperative administration of Gd2O3:Eu@PVA and 18F-FDG combination achieved a much higher tumor-to-normal tissue ratio (TNR, 10.24 ± 2.24 vs. 1.87 ± 0.73, P = 0.0030). The use of Gd2O3:Eu@PVA and 18F-FDG also assisted intraoperative detection of tumors that were omitted by preoperative positron emission tomography (PET) imaging. Further experiment of image-guided surgery demonstrated feasibility of image-guided tumor resection using Gd2O3:Eu@PVA and 18F-FDG. In summary, Gd2O3:Eu can achieve significantly optimized imaging property when combined with 18F-FDG in intraoperative tumor imaging and image-guided tumor resection surgery. It is expected that the development of the Gd2O3:Eu nanoparticle will promote investigation and application of novel nanoparticles that can interact with radiopharmaceuticals for improved imaging properties. This work highlighted the impact of the nanoprobe that can be excited by radiopharmaceuticals emitting CL, β, and γ radiation for precisely imaging of tumor and intraoperatively guide tumor resection.

scholarly journals Formation of GW190521 from stellar evolution: the impact of the hydrogen-rich envelope, dredge-up and 12C(α, γ)16O rate on the pair-instability black hole mass gap

2020 ◽  
Author(s):  
Guglielmo Costa ◽  
Alessandro Bressan ◽  
Michela Mapelli ◽  
Paola Marigo ◽  
Giuliano Iorio ◽  
...  
Keyword(s):  
Stellar Evolution ◽  
Reaction Rate ◽  
Primary Component ◽  
Mass Reduction ◽  
Black Hole Mass ◽  
Core Mass ◽  
The Core ◽  
Mass Gap ◽  
M Stars ◽  
The Impact

Abstract Pair-instability (PI) is expected to open a gap in the mass spectrum of black holes (BHs) between ≈40 − 65 M⊙ and ≈120 M⊙. The existence of the mass gap is currently being challenged by the detection of GW190521, with a primary component mass of $85^{+21}_{-14}$ M⊙. Here, we investigate the main uncertainties on the PI mass gap: the 12C(α, γ)16O reaction rate and the H-rich envelope collapse. With the standard 12C(α, γ)16O rate, the lower edge of the mass gap can be 70 M⊙ if we allow for the collapse of the residual H-rich envelope at metallicity Z ≤ 0.0003. Adopting the uncertainties given by the starlib database, for models computed with the 12C(α, γ)16O rate −1 σ, we find that the PI mass gap ranges between ≈80 M⊙ and ≈150 M⊙. Stars with MZAMS > 110 M⊙ may experience a deep dredge-up episode during the core helium-burning phase, that extracts matter from the core enriching the envelope. As a consequence of the He-core mass reduction, a star with MZAMS = 160 M⊙ may avoid the PI and produce a BH of 150 M⊙. In the −2 σ case, the PI mass gap ranges from 92 M⊙ to 110 M⊙. Finally, in models computed with 12C(α, γ)16O −3 σ, the mass gap is completely removed by the dredge-up effect. The onset of this dredge-up is particularly sensitive to the assumed model for convection and mixing. The combined effect of H-rich envelope collapse and low 12C(α, γ)16O rate can lead to the formation of BHs with masses consistent with the primary component of GW190521.

scholarly journals A numerical study of the impact perforation of sandwich panels with graded hollow sphere cores

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110094
Author(s):  
Ibrahim Elnasri ◽  
Han Zhao
Keyword(s):  
Boundary Conditions ◽  
Hollow Sphere ◽  
Sandwich Panel ◽  
Numerical Study ◽  
Sandwich Panels ◽  
Hopkinson Bar ◽  
Core Density ◽  
The Core ◽  
The Impact ◽  
Force Displacement

In this study, we numerically investigate the impact perforation of sandwich panels made of 0.8 mm 2024-T3 aluminum alloy skin sheets and graded polymeric hollow sphere cores with four different gradient profiles. A suitable numerical model was conducted using the LS-DYNA code, calibrated with an inverse perforation test, instrumented with a Hopkinson bar, and validated using experimental data from the literature. Moreover, the effects of quasi-static loading, landing rates, and boundary conditions on the perforation resistance of the studied graded core sandwich panels were discussed. The simulation results showed that the piercing force–displacement response of the graded core sandwich panels is affected by the core density gradient profiles. Besides, the energy absorption capability can be effectively enhanced by modifying the arrangement of the core layers with unclumping boundary conditions in the graded core sandwich panel, which is rather too hard to achieve with clumping boundary conditions.

Development of a Commercial Wireline Retrievable Coring System

1998 ◽  
Vol 1 (06) ◽  
pp. 489-495 ◽  
Author(s):  
Tommy Warren ◽  
Jim Powers ◽  
David Bode ◽  
Eric Carre ◽  
Lee Smith
Keyword(s):  
Economic Evaluation ◽  
Coalbed Methane ◽  
Technical Conference ◽  
The Core ◽  
Core Recovery ◽  
Drilling Equipment ◽  
Original Manuscript ◽  
The Impact ◽  
Conventional Drilling ◽  
Target Depth

This paper (SPE 52993) was revised for publication from paper SPE 36536, first presented at the 1996 SPE Annual Technical Conference and Exhibition, Denver, 6-9 October. Original manuscript received for review 11 October 1996. Revised manuscript received 22 September 1998. Paper peer approved 23 September 1998. Summary A Wireline retrievable coring system for use with conventional drilling equipment is described. The coring system was developed and tested for application in evaluating coalbed methane prospects where a large quantity of core is required, and it is essential that the core is processed soon after it is cut. A drill plug allows for alternation between coring and drilling without tripping the drillstring. The system is particularly advantageous for coring long intervals, multiple zones relatively close together, or when the exact target depth is unknown. The system has been used to core more than 4940 m (15,057 ft) in Poland, Germany, and France, with a combined core recovery of 94%. In addition, the impact of varying rig costs on total savings is factored into the overall economic evaluation of the system. P. 489

scholarly journals A High Rigidity and Precision Scanning Tunneling Microscope with Decoupled XY and Z Scans

Scanning ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-7
Author(s):  
Xu Chen ◽  
Tengfei Guo ◽  
Yubin Hou ◽  
Jing Zhang ◽  
Wenjie Meng ◽  
...  
Keyword(s):  
Scanning Tunneling Microscope ◽  
Atomic Resolution ◽  
Scanning Tunneling ◽  
Electronic Noise ◽  
High Quality ◽  
Tunneling Microscope ◽  
The Core ◽  
High Rigidity ◽  
The Common ◽  
The Impact

A new scan-head structure for the scanning tunneling microscope (STM) is proposed, featuring high scan precision and rigidity. The core structure consists of a piezoelectric tube scanner of quadrant type (for XY scans) coaxially housed in a piezoelectric tube with single inner and outer electrodes (for Z scan). They are fixed at one end (called common end). A hollow tantalum shaft is coaxially housed in the XY-scan tube and they are mutually fixed at both ends. When the XY scanner scans, its free end will bring the shaft to scan and the tip which is coaxially inserted in the shaft at the common end will scan a smaller area if the tip protrudes short enough from the common end. The decoupled XY and Z scans are desired for less image distortion and the mechanically reduced scan range has the superiority of reducing the impact of the background electronic noise on the scanner and enhancing the tip positioning precision. High quality atomic resolution images are also shown.

Sign in / Sign up

Export Citation Format

Share Document