scholarly journals An Innovative Method for the Recycling of Waste Carbohydrate-Based Flours

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1414
Author(s):  
Carola Esposito Corcione ◽  
Raffaella Striani ◽  
Francesca Ferrari ◽  
Paolo Visconti ◽  
Daniela Rizzo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Accelerated Ageing ◽  
Vapor Permeability ◽  
The Novel ◽  
Maize Starch ◽  
Points Of View ◽  
First Time

This work represents an innovative study that, for the first time, explores the possibility to use waste flours to produce thermoplastic polymeric bio-films. To the best of our knowledge, this is the first time that waste flours, derived from bakeries, pizzerias or pasta factories, have been proposed for the production of bio-polymers, as a replacement of neat starch. To this aim, durum waste flour derived from a pasta factory, soft waste flour derived from pizzerias and neat maize starch used as control material were firstly analyzed from dimensional, morphological and chemical points of view. Afterwards, waste flour films were produced by the addition of a nature-based plasticizer, glycerol. Mechanical characterization of the plasticized thermoplastic films, produced by compression molding, evidenced low performances, even in the case of the neat maize starch. In order to improve the mechanical properties, the possibility to include polylactic acid and cardanol-based plasticizer was also investigated. Mass transport properties of all the produced bio-films were investigated by measuring their water vapor permeability and hygroscopic absorption. The durability properties of the bio-films were assessed by accelerated ageing tests, while the bio-degradability of the waste-based films was evaluated by measuring the solubility and the degradation in water. The physicochemical analyses of the novel bio-films evidenced good mechanical properties; specifically, the waste-based films showed a lower hygroscopic absorption and water solubility than those of the blends containing neat starch.

scholarly journals Elaboration and Characterization of Active Apple Starch Films Incorporated with Ellagic Acid

Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 384
Author(s):  
Juan Tirado-Gallegos ◽  
Paul Zamudio-Flores ◽  
José Ornelas-Paz ◽  
Claudio Rios-Velasco ◽  
Guadalupe Olivas Orozco ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Vapor ◽  
Antioxidant Capacity ◽  
Ellagic Acid ◽  
Uv Light ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Starch Films

Apple starch films were obtained from apples harvested at 60, 70, 80 and 90 days after full bloom (DAFB). Mechanical properties and water vapor permeability (WVP) were evaluated. The apple starch films at 70 DAFB presented higher values in the variables of tensile strength (8.12 MPa), elastic modulus (3.10 MPa) and lower values of water vapor permeability (6.77 × 10−11 g m−1 s−1 Pa−1) than apple starch films from apples harvested at 60, 80 and 90 DAFB. Therefore, these films were chosen to continue the study incorporating ellagic acid (EA). The EA was added at three concentrations [0.02% (FILM-EA0.02%), 0.05% (FILM-EA0.05%) and 0.1% (FILM-EA0.1%) w/w] and compared with the apple starch films without EA (FILM-Control). The films were characterized by their physicochemical, optical, morphological and mechanical properties. Their thermal stability and antioxidant capacity were also evaluated. The FILM-Control and FILM-EA0.02% showed a uniform surface, while FILM-EA0.05% and FILM-EA0.1% showed a rough surface and insoluble EA particles. Compared to FILM-Control, EA modified the values of tensile strength, elasticity modulus and elongation at break. The antioxidant capacity increased as EA concentration did. EA incorporation allowed obtaining films with higher antioxidant capacity, capable of blocking UV light with better mechanical properties than film without EA.

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Physical Properties of Chitosan Edible Films Incorporated with Essential Oil Monomers

2012 ◽  
Vol 550-553 ◽  
pp. 993-999 ◽  
Author(s):  
Yun Bin Zhang ◽  
Jun Peng
Keyword(s):  
Mechanical Properties ◽  
Essential Oil ◽  
Physical Properties ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Antibacterial Activities ◽  
Edible Films ◽  
Vapor Permeability ◽  
Monomer Content ◽  
Chitosan Films

In this study, physical properties of chitosan edible films incorporated with essential oil monomers were tested. Emulsifying nature of chitosan could be combined essential oil monomer forming emulsions, hence homogeneous, thin and pale yellow membranes were achieved. With different of the essential oil monomer content, the nature of the films had undergone a drastic change. Water-solubility and water vapor permeability of chitosan edible films reduced when essential oil monomers concentration increased. All the mechanical properties(tensile strength and elongation) increased when essential oil monomers concentration gradual increased. Compared with single chitosan films, essential oil-chitosan films have been greatly enhanced their mechanical properties and antibacterial activities.

scholarly journals Characterization of Chitosan Film Incorporated with Curcumin Extract

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 963
Author(s):  
Pornchai Rachtanapun ◽  
Warinporn Klunklin ◽  
Pensak Jantrawut ◽  
Kittisak Jantanasakulwong ◽  
Yuthana Phimolsiripol ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Antioxidant Activity ◽  
Infrared Spectroscopy ◽  
Water Vapor ◽  
Moisture Content ◽  
Water Solubility ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Chitosan Films

Curcumin is a phenolic compound derived from turmeric roots (Curcuma longa L.). This research studied the effects of curcumin extract on the properties of chitosan films. The film characteristics measured included mechanical properties, visual aspects, color parameters, light transmission, moisture content, water solubility, water vapor permeability, infrared spectroscopy, and antioxidant activity. The results suggest that adding curcumin to chitosan-based films increases yellowness and light barriers. Infrared spectroscopy analysis showed interactions between the phenolic compounds of the extract and the chitosan, which may have improved the mechanical properties and reduced the moisture content, water solubility, and water vapor permeability of the films. The antioxidant activity of the films increased with increasing concentrations of the curcumin extract. This study shows the potential benefits of incorporating curcumin extract into chitosan films used as active packaging.

Development and characterization of a novel multifunctional film based on wheat filter flour incorporated with carvacrol: Antibacterial, antifungal, and insecticidal potentials

2021 ◽  
pp. 108201322110418
Author(s):  
Maryam Pyro- Mossavi ◽  
Mahboobeh Kashiri ◽  
Yahya Maghsoudlou ◽  
Morteza Khomiri ◽  
Mehran Alami
Keyword(s):  
Water Solubility ◽  
Water Vapor Permeability ◽  
Milling Process ◽  
Uniform Structure ◽  
Vapor Permeability ◽  
Film Forming ◽  
Modern Wheat ◽  
Blend Polymer ◽  
Food Model

Wheat filter flour is a by-product derived from the modern wheat milling process. In this study, the influence of plasticizer type (glycerol (G) and sorbitol (S)) and content (25, 35, and 45 g/100 g polymer) on the wheat filter flour-based film was evaluated. Regardless of plasticizer type, increasing the plasticizer content enhanced moisture content, water solubility, and water vapor permeability of film samples. The S-plasticized films presented the greatest tensile strength and the lowest EAB%. The scanning electron microscope observations confirmed the uniform structure of G-plasticized film. Moreover, antimicrobial and physico-mechanical properties of G-plasticized (25%) film were evaluated at the presence of carvacrol (5 and 10 g/100 g polymer). The considerable improvement was achieved in water affinity (14.2%) and flexibility (8.6%) by incorporating 10% carvacrol in G-plasticized films. The greatest inhibitory properties of active wheat filter flour films were observed against Aspergillus niger. By increasing the carvacrol concentration in film-forming solution, the inhibitory activity against Listeria monocytogenes and Escherichia coli in the liquid food model system was increased by 90.3% and 66.95%, respectively. Moreover, the active wheat filter flour-based film released a considerable insecticidal activity against Sitophilus granarius and Tribolium confusum. This work offers a novel utilization of wheat filter flour as an inexpensive blend polymer to manufacture multifunctional active film, which provides a promising approach for pest management besides enhancing the safety of products.

scholarly journals Development and Characterization of Pectin Films with Salicornia ramosissima: Biodegradation in Soil and Seawater

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2632
Author(s):  
Daniela G. M. Pereira ◽  
Jorge M. Vieira ◽  
António A. Vicente ◽  
Rui M. S. Cruz
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Elongation At Break ◽  
Control Film ◽  
Salicornia Ramosissima ◽  
Heterogeneous Microstructures ◽  
Biodegradation In Soil

Pectin films were developed by incorporating a halophyte plant Salicornia ramosissima (dry powder from stem parts) to modify the film’s properties. The films’ physicomechanical properties, Fourier-transform infrared spectroscopy (FTIR), and microstructure, as well as their biodegradation capacity in soil and seawater, were evaluated. The inclusion of S. ramosissima significantly increased the thickness (0.25 ± 0.01 mm; control 0.18 ± 0.01 mm), color parameters a* (4.96 ± 0.30; control 3.29 ± 0.16) and b* (28.62 ± 0.51; control 12.74 ± 0.75), water vapor permeability (1.62 × 10−9 ± 1.09 × 10−10 (g/m·s·Pa); control 1.24 × 10−9 ± 6.58 × 10−11 (g/m·s·Pa)), water solubility (50.50 ± 5.00%; control 11.56 ± 5.56%), and elongation at break (5.89 ± 0.29%; control 3.91 ± 0.62%). On the other hand, L* (48.84 ± 1.60), tensile strength (0.13 ± 0.02 MPa), and Young’s modulus (0.01 ± 0 MPa) presented lower values compared with the control (L* 81.20 ± 1.60; 4.19 ± 0.82 MPa; 0.93 ± 0.12 MPa), while the moisture content varied between 30% and 45%, for the film with S. ramosissima and the control film, respectively. The addition of S. ramosissima led to opaque films with relatively heterogeneous microstructures. The films showed also good biodegradation capacity—after 21 days in soil (around 90%), and after 30 days in seawater (fully fragmented). These results show that pectin films with S. ramosissima may have great potential to be used in the future as an eco-friendly food packaging material.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

scholarly journals Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2569
Author(s):  
Mia Kurek ◽  
Nasreddine Benbettaieb ◽  
Mario Ščetar ◽  
Eliot Chaudy ◽  
Maja Repajić ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Color Change ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Color Changes ◽  
Insoluble Particles ◽  
Polymer Stability ◽  
Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

Sign in / Sign up

Export Citation Format

Share Document