scholarly journals Effects and Mechanism of Surface Water Wettability and Operating Frequency on Response Linearity of Flexible IDE Capacitive Humidity Sensor

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6633
Author(s):  
Woo Seok Yang ◽  
Seungoh Han ◽  
Gyu-Ri Lim ◽  
Hyun You Kim ◽  
Sung-Hoon Hong
Keyword(s):  
Contact Angle ◽  
Surface Water ◽  
Radio Frequency Identification ◽  
Low Cost ◽  
Hydrophobic Surface ◽  
Linear Increase ◽  
Operating Frequency ◽  
Practical Applications ◽  
Humidity Response ◽  
Water Wettability

Flexible capacitive humidity sensors are promising for low-cost, wearable, and radio frequency identification sensors, but their nonlinear response is an important issue for practical applications. Herein, the linearity of humidity response was controlled by surface water wettability and operating frequency of sensor, and the mechanism was explained in detail by surface water condensation. For a sensor with a Ag interdigitated electrode (IDE) on a poly(ethylene terephthalate) substrate, the capacitance showed a small linear increase with humidity up to 70% RH but a large nonlinear increase in the higher range. The response linearity was increased by a hydrophobic surface treatment of self-assembled monolayer coating while it was decreased by an ultraviolet/ozone irradiation for hydrophilicity. It was also increased by increasing the frequency in the range of 1–100 kHz, more prominently on a more hydrophilic surface. Based on experiment and simulation, the increase in sensor capacitance was greatly dependent on the geometric pattern (e.g., size, number, and contact angle) and electrical permittivity of surface water droplets. A larger and more nonlinear humidity response resulted from a larger increase in the number of droplets with a smaller contact angle on a sensor surface with higher water wettability and also from a higher permittivity of water at a lower frequency.

scholarly journals On the application of the EM-imaging for chipless RFID tags

2015 ◽  
Vol 2 (2) ◽  
pp. 86-96 ◽  
Author(s):  
M. Zomorrodi ◽  
N.C. Karmakar
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
60 Ghz ◽  
Rfid Tag ◽  
High Data ◽  
Data Encoding ◽  
Bending Effect ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Cost Item

The electromagnetic (EM) imaging technique at mm-band 60 GHz is proposed for data encoding purpose in the chipless Radio Frequency Identification (RFID) systems. The fully printable chipless RFID tag comprises tiny conductive EM polarizers to create high cross-polar radar cross-section. Synthetic aperture radar approach is applied for formation of the tag's EM-image and revealing the tag's content. The achieved high data encoding capacity of 2 bits/cm2in this technique based on a fully printable tag is very convincing for many applications. The system immunity to multipath interference, bending effect, and printing inaccuracy suggests huge potentials for low-cost item tagging. Tags are also readable through a tick paper envelop; hence secure identification is provided by the proposed technique.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

Sitsen: Passive sitting posture sensing based on wireless devices

2021 ◽  
Vol 17 (7) ◽  
pp. 155014772110248
Author(s):  
Miaoyu Li ◽  
Zhuohan Jiang ◽  
Yutong Liu ◽  
Shuheng Chen ◽  
Marcin Wozniak ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
High Performance ◽  
Learning Algorithm ◽  
Low Cost ◽  
Recognition System ◽  
Sitting Posture ◽  
Average Accuracy ◽  
Phase Variations ◽  
Window Approach

Physical health diseases caused by wrong sitting postures are becoming increasingly serious and widespread, especially for sedentary students and workers. Existing video-based approaches and sensor-based approaches can achieve high accuracy, while they have limitations like breaching privacy and relying on specific sensor devices. In this work, we propose Sitsen, a non-contact wireless-based sitting posture recognition system, just using radio frequency signals alone, which neither compromises the privacy nor requires using various specific sensors. We demonstrate that Sitsen can successfully recognize five habitual sitting postures with just one lightweight and low-cost radio frequency identification tag. The intuition is that different postures induce different phase variations. Due to the received phase readings are corrupted by the environmental noise and hardware imperfection, we employ series of signal processing schemes to obtain clean phase readings. Using the sliding window approach to extract effective features of the measured phase sequences and employing an appropriate machine learning algorithm, Sitsen can achieve robust and high performance. Extensive experiments are conducted in an office with 10 volunteers. The result shows that our system can recognize different sitting postures with an average accuracy of 97.02%.

scholarly journals Preparation and photocatalytic performance of metallic Nb0.9Ta0.1S2/2D-C3N4 composite

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Hanxiang Chen ◽  
Jianjian Yi ◽  
Zhao Mo ◽  
Yanhua Song ◽  
Wenshu Yang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Low Cost ◽  
Metal Sulfide ◽  
Electron Hole ◽  
Practical Applications ◽  
Energy And Environment ◽  
Photocatalytic Application ◽  
Light Utilization ◽  
Ternary Metal ◽  
Key Issues

Abstract Photocatalysis technology has potential application in the field of energy and environment. How to expand visible light utilization and promote the separation efficiency of the carriers are the key issues for the high active photocatalysts preparation and future practical applications. In this work, a ternary metal sulfide Nb0.9Ta0.1S2 was prepared and used as an electron collector in the photocatalytic application. As a result, the generated electrons are quickly transferred to the surface of the composite to participate in the reaction. It was demonstrated that the photocatalytic activity of 2D-C3N4 was enhanced after the modification of Nb0.9Ta0.1S2. The Nb0.9Ta0.1S2/2D-C3N4 composite material was synthesized by solvothermal method. The composition of 5% Nb0.9Ta0.1S2/2D-C3N4 showed the highest H2 evolution rate of 1961.6 μmolg−1h−1, which was 6.6 times that of 2D-C3N4. The 15% Nb0.9Ta0.1S2/2D-C3N4 exhibited the best activity in Rhodamine B degradation rate of 97% in 2 h, which is 50% higher than that of 2D-C3N4. Nb0.9Ta0.1S2/2D-C3N4 can be used as electron trap to promote the effective separation of electron–hole pairs. This work provides benchmarks in exploring low-cost and efficient cocatalyst.

scholarly journals A Survey on Deep Learning Based Methods and Datasets for Monocular 3D Object Detection

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 517
Author(s):  
Seong-heum Kim ◽  
Youngbae Hwang
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Low Cost ◽  
Detection Methods ◽  
Future Research ◽  
3D Object ◽  
Practical Applications ◽  
Depth Sensors ◽  
Significant Research ◽  
3D Object Detection

Owing to recent advancements in deep learning methods and relevant databases, it is becoming increasingly easier to recognize 3D objects using only RGB images from single viewpoints. This study investigates the major breakthroughs and current progress in deep learning-based monocular 3D object detection. For relatively low-cost data acquisition systems without depth sensors or cameras at multiple viewpoints, we first consider existing databases with 2D RGB photos and their relevant attributes. Based on this simple sensor modality for practical applications, deep learning-based monocular 3D object detection methods that overcome significant research challenges are categorized and summarized. We present the key concepts and detailed descriptions of representative single-stage and multiple-stage detection solutions. In addition, we discuss the effectiveness of the detection models on their baseline benchmarks. Finally, we explore several directions for future research on monocular 3D object detection.

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

Osteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical Application

2016 ◽  
Vol 879 ◽  
pp. 2524-2527
Author(s):  
Masazumi Okido ◽  
Kensuke Kuroda
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Strong Influence ◽  
Biomedical Application ◽  
Hydrophobic Surface ◽  
Hydrophilic Surface ◽  
Water Contact ◽  
Zr Alloy ◽  
Zr Alloys

Surface hydrophilicity is considered to have a strong influence on the biological reactions of bone-substituting materials. However, the influence of a hydrophilic or hydrophobic surface on the osteoconductivity is not completely clear. In this study, we produced super-hydrophilic and hydrophobic surface on Ti-and Zr-alloys. Hydrothermal treatment at 180 oC for 180 min. in the distilled water and immersion in x5 PBS(-) brought the super-hydrophilic surface (water contact angle < 10 (deg.)) and heat treatment of as-hydrothermaled the hydrophobic surface. The osteoconductivity of the surface treated samples with several water contact angle was evaluated by in vivo testing. The surface properties, especially water contact angle, strongly affected the osteoconductivity and protein adsorbability, and not the surface substance.

A review of passive self-sensing tag

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Yawei Xu ◽  
Lihong Dong ◽  
Haidou Wang ◽  
Jiannong Jing ◽  
Yongxiang Lu
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Low Cost ◽  
Integrated Sensor ◽  
Content Type ◽  
Passive Sensing ◽  
Static Information ◽  
Potential Applications ◽  
Frequency Identification ◽  
Identification Tags

Purpose Radio frequency identification tags for passive sensing have attracted wide attention in the area of Internet of Things (IoT). Among them, some tags can sense the property change of objects without an integrated sensor, which is a new trend of passive sensing based on tag. The purpose of this paper is to review recent research on passive self-sensing tags (PSSTs). Design/methodology/approach The PSSTs reported in the past decade are classified in terms of sensing mode, composition and the ways of power supply. This paper presents operation principles of PSSTs and analyzes the characteristics of them. Moreover, the paper focuses on summarizing the latest sensing parameters of PSSTs and their matching equipment. Finally, some potential applications and challenges faced by this emerging technique are discussed. Findings PSST is suitable for long-term and large-scale monitoring compared to conventional sensors because it gets rid of the limitation of battery and has relatively low cost. Also, the static information of objects stored in different PSSTs can be identified by a single reader without touch. Originality/value This paper provides a detailed and timely review of the rapidly growing research in PSST.

Zinc Oxide Thin Film Morphology as Function of Substrate Position During Sputtering Process

2021 ◽  
Vol 900 ◽  
pp. 103-111
Author(s):  
Christelle Habis ◽  
Jean Zaraket ◽  
Michel Aillerie
Keyword(s):  
Thin Film ◽  
Zinc Oxide ◽  
Low Cost ◽  
Linear Increase ◽  
Oxide Thin Film ◽  
Central Position ◽  
Zinc Oxide Thin Film ◽  
Force Microscopy ◽  
Atomic Force ◽  
Great Transparency

Transparent conductive oxides are materials combining great transparency with high conductivity. In photovoltaic applications, they are developed under thin layer for the realization of upper electrodes of solar cells. Among transparent oxide materials, Zinc Oxide (ZnO) presents unique properties, starting with its first qualities to be abundant, low-cost and non-toxic oxide. Zinc Oxide thin film was deposited on rectangular glass substrate by magnetron sputtering. After an overview of the properties expected for good transparent conductive materials, the effect of distance from the center of the cell on the morphology of the film was investigated by Atomic Force Microscopy (AFM). The scanning was done on different area of the sample as function of the distance from the central position of the direct sputtering jet. As far as the distance increased, it has been noticed a quasi-linear increase in thickness of the ZnO deposited film and a change in the grain shape from spherical to pyramidal with an increase in the size of the particles. Controlling the sputtering distance allows the control of texture, thus of the Haze factor, the photo-generation of excitons, as well the optical transmission of the TCO layer and finally an improvement in the efficiency of the so-built photovoltaic cells.

An Experimental Study on Stretchy and Tough PDMS/Fabric Composites

2018 ◽  
Vol 86 (1) ◽  
Author(s):  
Ruofei Chang ◽  
Zhou Chen ◽  
Cunjiang Yu ◽  
Jizhou Song
Keyword(s):  
Fracture Toughness ◽  
Low Cost ◽  
Elastic Response ◽  
Deformation Localization ◽  
Practical Applications ◽  
Damage Propagation ◽  
Linear Elastic ◽  
Nylon Fabric ◽  
Fabric Composite ◽  
Fabric Composites

Polydimethylsiloxane (PDMS) has a good elasticity but with a pretty low fracture toughness, which limits its use in practical applications. This paper presents a simple and low-cost approach to manufacture a PDMS/fabric composite through incorporating the commercially available stretchy plain weft-knitted nylon fabric into the PDMS matrix. The fracture toughness of the composite is much higher than that of pure PDMS with an increase up to 700%. The toughening mechanism, which can be attributed to the deformation localization induced fiber stretch and damage propagation in the PDMS matrix, is fully investigated. During cyclic loadings, the composite may exhibit a linear elastic response or a significant hysteresis depending on the stretch level. These results provide physical insights into the deformation mechanism of a soft fabric-reinforced composite and may offer practical routes to realize robust crack-insensitive PDMS.

Sign in / Sign up

Export Citation Format

Share Document