scholarly journals Automated Locating Mining-Induced Microseismicity without Arrival Picking by Weighted STA/LTA Traces Stacking

2020 ◽  
Vol 12 (9) ◽  
pp. 3665
Author(s):  
Yuanjian Jiang ◽  
Pingan Peng ◽  
Liguan Wang ◽  
Zhengxiang He
Keyword(s):  
Optimal Algorithm ◽  
Signal To Noise Ratio ◽  
Dimensional Space ◽  
Engineering Application ◽  
Location Accuracy ◽  
Low Snr ◽  
Automatic Location ◽  
Grid Search Method ◽  
Location Algorithm

The automatic location of the microseismic source is still a challenging endeavor in the microseismic field. Due to the complexity of the mining environment, the microseismic records collected by different channels vary, and generally have a low signal-to-noise ratio (SNR). Therefore, the automatic location algorithm is required to be robust and accurate. For microseismic records with low SNR, the stack-based method does not need to pick arrival, thus avoiding the large location error caused by picking arrival. However, the traditional stack-based method does not consider the influence of the waveform quality of different stations, which can bring some errors to the location result. In this paper, in order to improve the location accuracy of the traditional stack-based method, we propose a method for weighted STA/LTA traces stacking. First, we established evaluation indicators of waveform quality based on microseismic records. Then, the STA/LTA traces are given weight to stack according to the evaluation indicators. Finally, the maximum value of the stacking function is solved in the four-dimensional space to obtain the source coordinates. In the process of calculation, we use the weighted differential evolution (WDE) optimal algorithm instead of the full grid search method, which greatly improves the calculation efficiency. The blasting experiment and engineering application show that the proposed method is stable and effective, and the location accuracy is higher than the traditional stack-based method and the arrival-based method.

scholarly journals Simulation and Analysis of the OFDM Transceiver Based Commutation System

2020 ◽  
Vol 26 (12) ◽  
pp. 131-140
Author(s):  
Areej Munadel ◽  
Ekhlas Kadhum Hamza
Keyword(s):  
Cognitive Radio ◽  
Signal To Noise Ratio ◽  
Radio Spectrum ◽  
Cyclic Prefix ◽  
Probability Of Detection ◽  
Energy Detector ◽  
Signal To Noise ◽  
Wireless Applications ◽  
Low Snr

As a result of the increase in wireless applications, this led to a spectrum problem, which was often a significant restriction. However, a wide bandwidth (more than two-thirds of the available) remains wasted due to inappropriate usage. As a consequence, the quality of the service of the system was impacted. This problem was resolved by using cognitive radio that provides opportunistic sharing or utilization of the spectrum. This paper analyzes the performance of the cognitive radio spectrum sensing algorithm for the energy detector, which implemented by using a MATLAB Mfile version (2018b). The signal to noise ratio SNR vs. Pd probability of detection for OFDM and SNR vs. BER with CP cyclic prefix with energy detector is calculated and analyzed. In this paper, the proposed work produces more accurate results compared to the existing techniques at low SNR values.

Vision-based fast location of multi-bar code in any direction

2017 ◽  
Vol 31 (19-21) ◽  
pp. 1740047 ◽  
Author(s):  
Sheng-Xin Lin ◽  
Xiao-Fang Zhao ◽  
Hua-Zhu Liu
Keyword(s):  
Cross Correlation ◽  
Recognition System ◽  
Cumulative Distribution ◽  
Bar Code ◽  
Bar Codes ◽  
Correlation Algorithm ◽  
Automatic Location ◽  
Localization Algorithms ◽  
Location Algorithm

The automatic location of the bar code is a key step in the bar code image recognition system. It is extremely confined that the generalization of the traditional bar code localization algorithms due to the requirements of both direction and quality of bar code, and most of them are only aimed at the single barcode localization. In this paper, we have proposed a novel multi-barcode location algorithm in arbitrary direction based on the accumulation of the linear gray value. First, the line coordinates of the barcode region is determined by the image normalized cross-correlation algorithm. Then the center line of gray value of cumulative distribution is used to analyze the barcode boundary and to determine the number of bar code within the region. Finally, the precise positioning of the barcode region is obtained. The experiments have demonstrated that our proposed method can be used to identify all the bar codes in any area, and automatically locate the bar codes in any direction.

Pre-Processing of Hyperspectral Images Using Nonlinear Filters

2013 ◽  
Vol 11 (1) ◽  
pp. 8-13
Author(s):  
V. Behar ◽  
V. Bogdanova
Keyword(s):  
Signal To Noise Ratio ◽  
Correlation Coefficients ◽  
Hyperspectral Images ◽  
Spectral Correlation ◽  
Edge Preserving ◽  
Improvement Factor ◽  
Filter Output ◽  
Average Improvement ◽  
Processing Procedure

Abstract In this paper the use of a set of nonlinear edge-preserving filters is proposed as a pre-processing stage with the purpose to improve the quality of hyperspectral images before object detection. The capability of each nonlinear filter to improve images, corrupted by spatially and spectrally correlated Gaussian noise, is evaluated in terms of the average Improvement factor in the Peak Signal to Noise Ratio (IPSNR), estimated at the filter output. The simulation results demonstrate that this pre-processing procedure is efficient only in case the spatial and spectral correlation coefficients of noise do not exceed the value of 0.6

Image Quality Enhancing by Efficient Histogram Equalization

2014 ◽  
Vol 2 (2) ◽  
pp. 47-58
Author(s):  
Ismail Sh. Baqer
Keyword(s):  
Image Quality ◽  
Contrast Enhancement ◽  
Mean Squared Error ◽  
Signal To Noise Ratio ◽  
Histogram Equalization ◽  
Gray Level ◽  
Signal To Noise ◽  
Squared Error ◽  
Noise Ratio

A two Level Image Quality enhancement is proposed in this paper. In the first level, Dualistic Sub-Image Histogram Equalization DSIHE method decomposes the original image into two sub-images based on median of original images. The second level deals with spikes shaped noise that may appear in the image after processing. We presents three methods of image enhancement GHE, LHE and proposed DSIHE that improve the visual quality of images. A comparative calculations is being carried out on above mentioned techniques to examine objective and subjective image quality parameters e.g. Peak Signal-to-Noise Ratio PSNR values, entropy H and mean squared error MSE to measure the quality of gray scale enhanced images. For handling gray-level images, convenient Histogram Equalization methods e.g. GHE and LHE tend to change the mean brightness of an image to middle level of the gray-level range limiting their appropriateness for contrast enhancement in consumer electronics such as TV monitors. The DSIHE methods seem to overcome this disadvantage as they tend to preserve both, the brightness and contrast enhancement. Experimental results show that the proposed technique gives better results in terms of Discrete Entropy, Signal to Noise ratio and Mean Squared Error values than the Global and Local histogram-based equalization methods

Singular Values Decomposition and Lifting Wavelet Transform for Speech Signal Embedding into Digital Image

2019 ◽  
Vol 12 (2) ◽  
pp. 138-151
Author(s):  
Mourad Talbi ◽  
Med Salim Bouhlel
Keyword(s):  
Wavelet Transform ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Perceptual Quality ◽  
Lifting Wavelet Transform ◽  
Signal To Noise ◽  
Perceptual Evaluation ◽  
Lifting Wavelet ◽  
Noise Ratio

Background: In this paper, we propose a secure image watermarking technique which is applied to grayscale and color images. It consists in applying the SVD (Singular Value Decomposition) in the Lifting Wavelet Transform domain for embedding a speech image (the watermark) into the host image. Methods: It also uses signature in the embedding and extraction steps. Its performance is justified by the computation of PSNR (Pick Signal to Noise Ratio), SSIM (Structural Similarity), SNR (Signal to Noise Ratio), SegSNR (Segmental SNR) and PESQ (Perceptual Evaluation Speech Quality). Results: The PSNR and SSIM are used for evaluating the perceptual quality of the watermarked image compared to the original image. The SNR, SegSNR and PESQ are used for evaluating the perceptual quality of the reconstructed or extracted speech signal compared to the original speech signal. Conclusion: The Results obtained from computation of PSNR, SSIM, SNR, SegSNR and PESQ show the performance of the proposed technique.

scholarly journals 3D DCT Based Image Compression Method for the Medical Endoscopic Application

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1817
Author(s):  
Jiawen Xue ◽  
Li Yin ◽  
Zehua Lan ◽  
Mingzhu Long ◽  
Guolin Li ◽  
...  
Keyword(s):  
Image Compression ◽  
Compression Ratio ◽  
Signal To Noise Ratio ◽  
Blocking Artifacts ◽  
Compression Method ◽  
High Compression Ratio ◽  
Multiplication Operation ◽  
3D Data ◽  
Wireless Capsule

This paper proposes a novel 3D discrete cosine transform (DCT) based image compression method for medical endoscopic applications. Due to the high correlation among color components of wireless capsule endoscopy (WCE) images, the original 2D Bayer data pattern is reconstructed into a new 3D data pattern, and 3D DCT is adopted to compress the 3D data for high compression ratio and high quality. For the low computational complexity of 3D-DCT, an optimized 4-point DCT butterfly structure without multiplication operation is proposed. Due to the unique characteristics of the 3D data pattern, the quantization and zigzag scan are ameliorated. To further improve the visual quality of decompressed images, a frequency-domain filter is proposed to eliminate the blocking artifacts adaptively. Experiments show that our method attains an average compression ratio (CR) of 22.94:1 with the peak signal to noise ratio (PSNR) of 40.73 dB, which outperforms state-of-the-art methods.

Modal frequencies of bridges from GNSS (GPS) monitoring data: Experimental, statistical evidence

2021 ◽  
Vol 17 (1-2) ◽  
pp. 3-14
Author(s):  
Stathis C. Stiros ◽  
F. Moschas ◽  
P. Triantafyllidis
Keyword(s):  
Signal To Noise Ratio ◽  
Vertical Axis ◽  
Bridge Monitoring ◽  
Low Snr ◽  
True Value ◽  
Gps Satellites ◽  
Wide Range ◽  
Spectral Peaks ◽  
Monitoring Survey ◽  
True Frequency

GNSS technology (known especially for GPS satellites) for measurement of deflections has proved very efficient and useful in bridge structural monitoring, even for short stiff bridges, especially after the advent of 100 Hz GNSS sensors. Mode computation from dynamic deflections has been proposed as one of the applications of this technology. Apart from formal modal analyses with GNSS input, and from spectral analysis of controlled free attenuating oscillations, it has been argued that simple spectra of deflections can define more than one modal frequencies. To test this scenario, we analyzed 21 controlled excitation events from a certain bridge monitoring survey, focusing on lateral and vertical deflections, recorded both by GNSS and an accelerometer. These events contain a transient and a following oscillation, and they are preceded and followed by intervals of quiescence and ambient vibrations. Spectra for each event, for the lateral and the vertical axis of the bridge, and for and each instrument (GNSS, accelerometer) were computed, normalized to their maximum value, and printed one over the other, in order to produce a single composite spectrum for each of the four sets. In these four sets, there was also marked the true value of modal frequency, derived from free attenuating oscillations. It was found that for high SNR (signal-to-noise ratio) deflections, spectral peaks in both acceleration and displacement spectra differ by up to 0.3 Hz from the true value. For low SNR, defections spectra do not match the true frequency, but acceleration spectra provide a low-precision estimate of the true frequency. This is because various excitation effects (traffic, wind etc.) contribute with numerous peaks in a wide range of frequencies. Reliable estimates of modal frequencies can hence be derived from deflections spectra only if excitation frequencies (mostly traffic and wind) can be filtered along with most measurement noise, on the basis of additional data.

scholarly journals Understanding PI-QUAL for prostate MRI quality: a practical primer for radiologists

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Francesco Giganti ◽  
Alex Kirkham ◽  
Veeru Kasivisvanathan ◽  
Marianthi-Vasiliki Papoutsaki ◽  
Shonit Punwani ◽  
...  
Keyword(s):  
Diffusion Weighted Imaging ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Diagnostic Quality ◽  
Prostate Mri ◽  
Prostate Imaging ◽  
Dynamic Contrast Enhanced ◽  
Diffusion Weighted ◽  
Contrast Enhanced

AbstractProstate magnetic resonance imaging (MRI) of high diagnostic quality is a key determinant for either detection or exclusion of prostate cancer. Adequate high spatial resolution on T2-weighted imaging, good diffusion-weighted imaging and dynamic contrast-enhanced sequences of high signal-to-noise ratio are the prerequisite for a high-quality MRI study of the prostate. The Prostate Imaging Quality (PI-QUAL) score was created to assess the diagnostic quality of a scan against a set of objective criteria as per Prostate Imaging-Reporting and Data System recommendations, together with criteria obtained from the image. The PI-QUAL score is a 1-to-5 scale where a score of 1 indicates that all MR sequences (T2-weighted imaging, diffusion-weighted imaging and dynamic contrast-enhanced sequences) are below the minimum standard of diagnostic quality, a score of 3 means that the scan is of sufficient diagnostic quality, and a score of 5 implies that all three sequences are of optimal diagnostic quality. The purpose of this educational review is to provide a practical guide to assess the quality of prostate MRI using PI-QUAL and to familiarise the radiologist and all those involved in prostate MRI with this scoring system. A variety of images are also presented to demonstrate the difference between suboptimal and good prostate MR scans.

scholarly journals Convolution Network with Custom Loss Function for the Denoising of Low SNR Raman Spectra

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4623
Author(s):  
Sinead Barton ◽  
Salaheddin Alakkari ◽  
Kevin O’Dwyer ◽  
Tomas Ward ◽  
Bryan Hennelly
Keyword(s):  
Raman Spectra ◽  
Loss Function ◽  
Signal To Noise Ratio ◽  
Biomedical Science ◽  
Clinical Tool ◽  
Signal To Noise ◽  
Low Snr ◽  
Low Intensity ◽  
Spectral Peaks ◽  
Noise Ratio

Raman spectroscopy is a powerful diagnostic tool in biomedical science, whereby different disease groups can be classified based on subtle differences in the cell or tissue spectra. A key component in the classification of Raman spectra is the application of multi-variate statistical models. However, Raman scattering is a weak process, resulting in a trade-off between acquisition times and signal-to-noise ratios, which has limited its more widespread adoption as a clinical tool. Typically denoising is applied to the Raman spectrum from a biological sample to improve the signal-to-noise ratio before application of statistical modeling. A popular method for performing this is Savitsky–Golay filtering. Such an algorithm is difficult to tailor so that it can strike a balance between denoising and excessive smoothing of spectral peaks, the characteristics of which are critically important for classification purposes. In this paper, we demonstrate how Convolutional Neural Networks may be enhanced with a non-standard loss function in order to improve the overall signal-to-noise ratio of spectra while limiting corruption of the spectral peaks. Simulated Raman spectra and experimental data are used to train and evaluate the performance of the algorithm in terms of the signal to noise ratio and peak fidelity. The proposed method is demonstrated to effectively smooth noise while preserving spectral features in low intensity spectra which is advantageous when compared with Savitzky–Golay filtering. For low intensity spectra the proposed algorithm was shown to improve the signal to noise ratios by up to 100% in terms of both local and overall signal to noise ratios, indicating that this method would be most suitable for low light or high throughput applications.

Optimal Parameter Design of Solder Residue in Flip Chip Process by Using Taguchi Method

2010 ◽  
Vol 443 ◽  
pp. 543-548
Author(s):  
Jian Long Kuo ◽  
Kai Lun Chao ◽  
Chun Cheng Kuo
Keyword(s):  
Taguchi Method ◽  
Product Quality ◽  
Manufacturing Process ◽  
Flip Chip ◽  
Optimal Parameter ◽  
Experimental Testing ◽  
Signal To Noise Ratio ◽  
Optimal Solution ◽  
Passive Component

Because the solder residue was found in the manufacturing process which greatly affected the product quality, the purpose of this paper was to make the product quality improved and to find an optimal solution for process parameters in the flip chip process. The experimental testing was based on SMT manufacturing process. The amount and size of solder left on passive component in the process of manufacturing were considered as the quality traits. Since too many solders left on the passive component side during flux cleaning process, it was possible that the balling would be flowed into the chip, which caused the bump short in the chip and affected the quality of the product. In this paper, orthogonal array by using Taguchi method is adopted as the effective experimental method with the least experimental runs. Also, based on the quality evaluation of signal-to-noise ratio, the ANOVA is used to evaluate the effects of quality target according to the experimental results. The results reveal that the optimization in the process is confirmed. Therefore, this study can effectively improve the solder residue in semiconductor manufacturing process.

Sign in / Sign up

Export Citation Format

Share Document