scholarly journals Life Cycle Assessment of an Integrated Steel Mill Using Primary Manufacturing Data: Actual Environmental Profile

2021 ◽  
Vol 13 (6) ◽  
pp. 3443
Author(s):  
Jana Gerta Backes ◽  
Julian Suer ◽  
Nils Pauliks ◽  
Sabrina Neugebauer ◽  
Marzia Traverso
Keyword(s):  
Life Cycle Assessment ◽  
Blast Furnace ◽  
Life Cycle ◽  
Steel Production ◽  
Modern Society ◽  
Basic Oxygen Furnace ◽  
Steel Mill ◽  
Complete Life Cycle ◽  
The Individual ◽  
The Impact

The current dependency on steel within modern society causes major environmental pollution, a result of the product’s life cycle phases. Unfortunately, very little data regarding single steel production processes have been found in literature. Therefore, a detailed analysis of impacts categorized in terms of relevance cannot be conducted. In this study, a complete life cycle assessment of steel production in an integrated German steel plant of thyssenkrupp Steel Europe AG, including an assessment of emissions from the blast furnace, the basic oxygen furnace, and casting rolling, is carried out. The functional unit is set to 1 kg hot-rolled coil, and the system boundaries are defined as cradle-to-gate. This study models the individual process steps and the resulting emitters using the software GaBi. Total emissions could be distributed into direct, upstream, and by-product emissions, where the biggest impacts in terms of direct emissions from single processes are from the power plant (48% global warming potential (GWP)), the blast furnace (22% GWP), and the sinter plant (79% photochemical ozone creation potential (POCP)). The summarized upstream processes have the largest share in the impact categories acidification potential (AP; 69%) and abiotic depletion potential fossil (ADPf; 110%). The results, including data verification, furthermore show the future significance of the supply chain in the necessary reduction that could be achieved.

Life Cycle Assessment of Steel Production

2014 ◽  
Vol 787 ◽  
pp. 102-105 ◽  
Author(s):  
Jiang Yuan Hu ◽  
Feng Gao ◽  
Zhi Hong Wang ◽  
Xian Zheng Gong
Keyword(s):  
Life Cycle Assessment ◽  
Blast Furnace ◽  
Life Cycle ◽  
Steel Industry ◽  
Steel Production ◽  
Iron And Steel Industry ◽  
Important Process ◽  
Iron And Steel ◽  
Production Route ◽  
Photochemical Ozone

Based on life cycle assessment, analysis of energy consumption and other environment load by steel production in Chinese typical iron and steel industry was carried out. The process accounted for the most environment load was found by studying the different processes in steel production route. The results indicate that the most important process is blast furnace (BF) which is the major factor of CO2 and CO emissions, and contributes most to globe warming potential (GWP) and photochemical ozone creation potential (POCP).

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

scholarly journals Case study of a water bioengineering construction site in Austria. Ecological aspects and application of an environmental life cycle assessment model

2021 ◽  
Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Assessment Model ◽  
Construction Site ◽  
Negative Effects ◽  
Environmental Life Cycle Assessment ◽  
The Impact ◽  
Soil And Water

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.

scholarly journals Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

2021 ◽  
Vol 11 (9) ◽  
pp. 3820
Author(s):  
Noelia Llantoy ◽  
Gabriel Zsembinszki ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Innovative System ◽  
The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

scholarly journals Exploring sustainability potentials in vineyards through LCA? Evidence from farming practices in South Africa

2021 ◽  
Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
South African ◽  
Wine Grape ◽  
Impact Categories ◽  
Farming Practices ◽  
Manual Labour ◽  
The Impact

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals Are Renewables as Friendly to Humans as to the Environment?: A Social Life Cycle Assessment of Renewable Electricity

2019 ◽  
Vol 11 (5) ◽  
pp. 1370 ◽  
Author(s):  
Shutaro Takeda ◽  
Alexander Keeley ◽  
Shigeki Sakurai ◽  
Shunsuke Managi ◽  
Catherine Norris
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Social Life ◽  
Electricity Production ◽  
Social Life Cycle Assessment ◽  
Solar Photovoltaic ◽  
Energy Technologies ◽  
Electricity Mix ◽  
The Impact

The adoption of renewable energy technologies in developing nations is recognized to have positive environmental impacts; however, what are their effects on the electricity supply chain workers? This article provides a quantitative analysis on this question through a relatively new framework called social life cycle assessment, taking Malaysia as a case example. Impact assessments by the authors show that electricity from renewables has greater adverse impacts on supply chain workers than the conventional electricity mix: Electricity production with biomass requires 127% longer labor hours per unit-electricity under the risk of human rights violations, while the solar photovoltaic requires 95% longer labor hours per unit-electricity. However, our assessment also indicates that renewables have less impacts per dollar-spent. In fact, the impact of solar photovoltaic would be 60% less than the conventional mix when it attains grid parity. The answer of “are renewables as friendly to humans as to the environment?” is “not-yet, but eventually.”

scholarly journals Impact of Cycle Time and Payload of an Industrial Robot on Resource Efficiency

Robotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 33
Author(s):  
Florian Stuhlenmiller ◽  
Steffi Weyand ◽  
Jens Jungblut ◽  
Liselotte Schebek ◽  
Debora Clever ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Resource Efficiency ◽  
Life Cycle Costs ◽  
Gas Emissions ◽  
Cycle Times ◽  
The Individual

Modern industry benefits from the automation capabilities and flexibility of robots. Consequently, the performance depends on the individual task, robot and trajectory, while application periods of several years lead to a significant impact of the use phase on the resource efficiency. In this work, simulation models predicting a robot’s energy consumption are extended by an estimation of the reliability, enabling the consideration of maintenance to enhance the assessment of the application’s life cycle costs. Furthermore, a life cycle assessment yields the greenhouse gas emissions for the individual application. Potential benefits of the combination of motion simulation and cost analysis are highlighted by the application to an exemplary system. For the selected application, the consumed energy has a distinct impact on greenhouse gas emissions, while acquisition costs govern life cycle costs. Low cycle times result in reduced costs per workpiece, however, for short cycle times and higher payloads, the probability of required spare parts distinctly increases for two critical robotic joints. Hence, the analysis of energy consumption and reliability, in combination with maintenance, life cycle costing and life cycle assessment, can provide additional information to improve the resource efficiency.

scholarly journals Attributional & Consequential Life Cycle Assessment: Definitions, Conceptual Characteristics and Modelling Restrictions

2021 ◽  
Vol 13 (13) ◽  
pp. 7386
Author(s):  
Thomas Schaubroeck ◽  
Simon Schaubroeck ◽  
Reinout Heijungs ◽  
Alessandra Zamagni ◽  
Miguel Brandão ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Product Life Cycle ◽  
Sustainability Assessment ◽  
Consequential Life Cycle Assessment ◽  
Modelling Framework ◽  
Potential Environmental Impact ◽  
Reference Environment ◽  
The Impact

To assess the potential environmental impact of human/industrial systems, life cycle assessment (LCA) is a very common method. There are two prominent types of LCA, namely attributional (ALCA) and consequential (CLCA). A lot of literature covers these approaches, but a general consensus on what they represent and an overview of all their differences seems lacking, nor has every prominent feature been fully explored. The two main objectives of this article are: (1) to argue for and select definitions for each concept and (2) specify all conceptual characteristics (including translation into modelling restrictions), re-evaluating and going beyond findings in the state of the art. For the first objective, mainly because the validity of interpretation of a term is also a matter of consensus, we argue the selection of definitions present in the 2011 UNEP-SETAC report. ALCA attributes a share of the potential environmental impact of the world to a product life cycle, while CLCA assesses the environmental consequences of a decision (e.g., increase of product demand). Regarding the second objective, the product system in ALCA constitutes all processes that are linked by physical, energy flows or services. Because of the requirement of additivity for ALCA, a double-counting check needs to be executed, modelling is restricted (e.g., guaranteed through linearity) and partitioning of multifunctional processes is systematically needed (for evaluation per single product). The latter matters also hold in a similar manner for the impact assessment, which is commonly overlooked. CLCA, is completely consequential and there is no limitation regarding what a modelling framework should entail, with the coverage of co-products through substitution being just one approach and not the only one (e.g., additional consumption is possible). Both ALCA and CLCA can be considered over any time span (past, present & future) and either using a reference environment or different scenarios. Furthermore, both ALCA and CLCA could be specific for average or marginal (small) products or decisions, and further datasets. These findings also hold for life cycle sustainability assessment.

Sign in / Sign up

Export Citation Format

Share Document