Influencia de las condiciones de secado solar en la coloración de plantas medicinales

2019 ◽  
pp. 28-34
Author(s):  
Margarita Castillo-Téllez ◽  
Beatriz Castillo-Téllez ◽  
Juan Carlos Ovando-Sierra ◽  
Luz María Hernández-Cruz
Keyword(s):  
Medicinal Plants ◽  
Forced Convection ◽  
Rural Areas ◽  
Color Change ◽  
Drying Process ◽  
Scientific Medicine ◽  
Drying Time ◽  
Bacterial Proliferation ◽  
Wide Range ◽  
Very High

For millennia, humans have used hundreds of medicinal plants to treat diseases. Currently, many species with important characteristics are known to alleviate a wide range of health problems, mainly in rural areas, where the use of these resources is very high, even replacing scientific medicine almost completely. This paper presents the dehydration of medicinal plants that are grown in the State of Campeche through direct and indirect solar technologies in order to evaluate the influence of air flow and temperature on the color of the final product through the L* a* scale. b*, analyzing the activity of water and humidity during the drying process. The experimental results showed that the direct solar dryer with forced convection presents a little significant color change in a drying time of 400 min on average, guaranteeing the null bacterial proliferation and reaching a final humidity between 9 % and 11 %.

scholarly journals Commercialization Potential of Six Selected Medicinal Plants Commonly Used for Childhood Diseases in South Africa: A Review

2021 ◽  
Vol 14 (1) ◽  
pp. 177
Author(s):  
Peter Tshepiso Ndhlovu ◽  
Abiodun Olusola Omotayo ◽  
Wilfred Otang-Mbeng ◽  
Adeyemi Oladapo Aremu
Keyword(s):  
South Africa ◽  
Medicinal Plants ◽  
Rural Areas ◽  
Action Plan ◽  
Economic Value ◽  
Age Groups ◽  
Datura Stramonium ◽  
Childhood Diseases ◽  
Scientific Databases ◽  
Wide Range

Globally, the potential of medicinal plants is increasingly being recognized due to their relative availability, particularly in rural areas. This review explored the ethnobotanical and economic values of six selected medicinal plants widely used to treat and manage childhood diseases in South Africa. Acalypha glabrata, Aloe maculata, Datura stramonium, Gomphocarpus fruticosus, Rhoicissus tridentata and Vachellia karroo were selected based on their high relative frequency of citations for treating a wide range of diseases. Information was obtained from various scientific databases and ethnobotanical books. In addition to being popular for treating childhood diseases, the selected medicinal plants possess diverse applications in traditional medicine for other age groups, highlighting their general therapeutic values. This translates to extensive harvesting, trading and consumption of these plants in order to meet demands on local levels. Currently, empirical data on the economic value of the selected plants remain poorly reported. Even though South Africa has many laws to conserve and promote indigenous knowledge and medicinal plants, their commercialization remains low. Particularly the cultivation of the selected plants needs to be promoted under a participatory management action plan to stimulate the economy of the disadvantaged. A collaborative research framework for the inclusive transformation of indigenous medicinal plants is recommended to reveal their concealed beneficial properties.

scholarly journals Influence of Various Temperatures on the Drying Time of 220/66 KV Transformer Insulations in Vapour Phase Drying Process

2020 ◽  
Vol 9 (5) ◽  
pp. 645-651
Keyword(s):  
Moisture Content ◽  
Vapour Phase ◽  
Vital Role ◽  
Drying Process ◽  
Drying Time ◽  
Moisture Extraction ◽  
High Level ◽  
Transformer Insulation ◽  
Cellulose Insulation ◽  
Very High

Cellulose based insulation in the form of different papers and pressboard play a vital role in transformer manufacturing as very high level of voltages are encountered during transformer operation. Cellulose being hygroscopic in nature contains 8-10% moisture by weight. The life of a transformer is critically dependant on the state of cellulose insulation so much so that, paper with 1.5% moisture content ages 10 times faster than with only 0.3% moisture. For obvious reasons, it is very important that the moisture is removed from transformer insulation. As of today, the latest technology available for this moisture extraction is the vapour phase drying process. This paper evaluates the influence of temperatures at various locations on the drying time of two 220kv transformer insulations in vapour phase drying process.

scholarly journals Design and Development of Low Temperature Community Solar Dryer for Oily and Hard Edible Produces

2020 ◽  
Vol 15 (3) ◽  
pp. 200-204
Author(s):  
Shruti Kumari ◽  
Renu Kumari ◽  
Shilpa Choudhary ◽  
Sanjay Kumar
Keyword(s):  
Rural Areas ◽  
Transportation Network ◽  
Extended Period ◽  
High Water ◽  
High Water Content ◽  
Market Place ◽  
High Count ◽  
Drying Time ◽  
Solar Dryer ◽  
Very High

Horticulture produce have very high-water content, sometimes more than 90% by volume. Several of them are oily and hard. These horticulture produce have very high count of free radicals and are medicinal in nature. Usually, these are grown in scattered places in rural areas on sidelines of regular agriculture, far from the market place. Their price slumps during seasons and increase exponentially after it, due to short lifetime and absence of good transportation network, cost-effective proper preservation technology as well as specialized transportation vehicles. In this paper, Small state of the art family size solar dryer of 5 kg per day is designed to dry these produces in a single day and validated in real time experiments. The dryer is capable of maintaining desired temperature range to extended period even after sunshine, with the help of High Heat Capacity Material and Phase Change Material. Humidity removal mechanism is also introduced to reduce drying time by at least two hours.

scholarly journals Influence of Various Temperatures on the Drying Time of 132 KV Transformer Insulations in Vapour Phase Drying Process

2020 ◽  
Vol 9 (3) ◽  
pp. 3072-3078
Keyword(s):  
Moisture Content ◽  
Vapour Phase ◽  
The State ◽  
Vacuum Drying ◽  
Drying Process ◽  
Drying Time ◽  
Insulation Materials ◽  
Transformer Insulation ◽  
Cellulose Insulation ◽  
Very High

Transformers are required to handle very high levels of voltage and hence proper insulation is very important in transformers. As of now, the most preferred form of insulation in transformers is cellulose based. The state of cellulose insulation materials like paper & pressboards determines the life end of a transformer. Paper with 1.5% moisture content ages 10 times faster than with only 0.3% moisture. For obvious reasons, it is very important that the moisture is removed from transformer insulation. Vacuum drying has been conventionally used in industries for insulation drying but, as of today the latest technology available is the vapour phase drying process. This paper evaluates the influence of temperatures at various locations on the drying time of the 132kv transformer insulations in vapour phase drying process.

TEM study of boron additions to cobalt aluminide

1988 ◽  
Vol 46 ◽  
pp. 546-547
Author(s):  
Gerald B. Feldewerth
Keyword(s):  
High Temperature ◽  
Turbine Engines ◽  
Major Drawback ◽  
University Of Missouri ◽  
Specific Strength ◽  
Aerospace Applications ◽  
Wide Range ◽  
Ordered Alloys ◽  
The University ◽  
Very High

In recent years an increasing emphasis has been placed on the study of high temperature intermetallic compounds for possible aerospace applications. One group of interest is the B2 aiuminides. This group of intermetaliics has a very high melting temperature, good high temperature, and excellent specific strength. These qualities make it a candidate for applications such as turbine engines. The B2 aiuminides exist over a wide range of compositions and also have a large solubility for third element substitutional additions, which may allow alloying additions to overcome their major drawback, their brittle nature.One B2 aluminide currently being studied is cobalt aluminide. Optical microscopy of CoAl alloys produced at the University of Missouri-Rolla showed a dramatic decrease in the grain size which affects the yield strength and flow stress of long range ordered alloys, and a change in the grain shape with the addition of 0.5 % boron.

Features of the Christian values ​​system

2004 ◽  
pp. 21-29
Author(s):  
G.V. Pyrog
Keyword(s):  
Public Opinion ◽  
Religious Beliefs ◽  
Religious Values ◽  
Direct Influence ◽  
Moral Norms ◽  
Value System ◽  
Christian Religion ◽  
Mass Consciousness ◽  
Wide Range ◽  
Very High

In domestic scientific and public opinion, interest in religion as a new worldview paradigm is very high. Today's attention to the Christian religion in our society is connected, in our opinion, with the specificity of its value system, which distinguishes it from other forms of consciousness: the idea of ​​God, the absolute, the eternity of moral norms. That is why its historical forms do not receive accurate characteristics and do not matter in the mass consciousness. Modern religious beliefs do not always arise as a result of the direct influence of church preaching. The emerging religious values ​​are absorbed in a wide range of philosophical, artistic, ethical ideas, acting as a compensation for what is generally defined as spirituality. At the same time, the appeal to Christian values ​​became very popular.

CATFISH DRYING (Clarias Batraclus) USING ‘TEKO BERSAYAP’ SOLAR DRYER

2012 ◽  
Vol 2 (1) ◽  
pp. 14-20
Author(s):  
Yuwana Yuwana
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Ambient Temperature ◽  
Drying Rate ◽  
Drying Process ◽  
Drying Time ◽  
Ambient Relative Humidity ◽  
Solar Dryer

Experiment on catfish drying employing ‘Teko Bersayap’ solar dryer was conducted. The result of the experiment indicated that the dryer was able to increase ambient temperature up to 44% and decrease ambient relative humidity up to 103%. Fish drying process followed equations : KAu = 74,94 e-0,03t for unsplitted fish and KAb = 79,25 e-0,09t for splitted fish, where KAu = moisture content of unsplitted fish (%), KAb = moisture content of splitted fish (%), t = drying time. Drying of unsplitted fish finished in 43.995 hours while drying of split fish completed in 15.29 hours. Splitting the fish increased 2,877 times drying rate.

DURCOMET 100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Annealed Condition ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Very High

Abstract Durcomet 100 is an improved version of Alloy CD-4 MCu with better corrosion and wear resistance. The alloy is used in the annealed condition and possesses excellent corrosion resistance over a wide range of corrosion environments. Mechanical strength is also very high. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-540. Producer or source: Duriron Company Inc.

Current Status and Future Perspective for Research on Medicinal Plants with Anticancerous Activity and Minimum Cytotoxic Value

2019 ◽  
Vol 20 (12) ◽  
pp. 1227-1243
Author(s):  
Hina Qamar ◽  
Sumbul Rehman ◽  
D.K. Chauhan
Keyword(s):  
Side Effects ◽  
Medicinal Plants ◽  
Anticancer Agents ◽  
Drug Targets ◽  
Psidium Guajava ◽  
Current Status ◽  
Future Perspective ◽  
Wide Range

Cancer is the second leading cause of morbidity and mortality worldwide. Although chemotherapy and radiotherapy enhance the survival rate of cancerous patients but they have several acute toxic effects. Therefore, there is a need to search for new anticancer agents having better efficacy and lesser side effects. In this regard, herbal treatment is found to be a safe method for treating and preventing cancer. Here, an attempt has been made to screen some less explored medicinal plants like Ammania baccifera, Asclepias curassavica, Azadarichta indica, Butea monosperma, Croton tiglium, Hedera nepalensis, Jatropha curcas, Momordica charantia, Moringa oleifera, Psidium guajava, etc. having potent anticancer activity with minimum cytotoxic value (IC50 >3μM) and lesser or negligible toxicity. They are rich in active phytochemicals with a wide range of drug targets. In this study, these medicinal plants were evaluated for dose-dependent cytotoxicological studies via in vitro MTT assay and in vivo tumor models along with some more plants which are reported to have IC50 value in the range of 0.019-0.528 mg/ml. The findings indicate that these plants inhibit tumor growth by their antiproliferative, pro-apoptotic, anti-metastatic and anti-angiogenic molecular targets. They are widely used because of their easy availability, affordable price and having no or sometimes minimal side effects. This review provides a baseline for the discovery of anticancer drugs from medicinal plants having minimum cytotoxic value with minimal side effects and establishment of their analogues for the welfare of mankind.

scholarly journals Separate Universe calibration of the dependence of halo bias on cosmic web anisotropy

2020 ◽  
Vol 499 (3) ◽  
pp. 4418-4431 ◽  
Author(s):  
Sujatha Ramakrishnan ◽  
Aseem Paranjape
Keyword(s):  
Dark Matter ◽  
High Precision ◽  
Gaussian Distribution ◽  
Initial Perturbation ◽  
Analytical Framework ◽  
Web Environment ◽  
Wide Range ◽  
Galaxy Assembly ◽  
Very High ◽  
Good Agreement

ABSTRACT We use the Separate Universe technique to calibrate the dependence of linear and quadratic halo bias b1 and b2 on the local cosmic web environment of dark matter haloes. We do this by measuring the response of halo abundances at fixed mass and cosmic web tidal anisotropy α to an infinite wavelength initial perturbation. We augment our measurements with an analytical framework developed in earlier work that exploits the near-lognormal shape of the distribution of α and results in very high precision calibrations. We present convenient fitting functions for the dependence of b1 and b2 on α over a wide range of halo mass for redshifts 0 ≤ z ≤ 1. Our calibration of b2(α) is the first demonstration to date of the dependence of non-linear bias on the local web environment. Motivated by previous results that showed that α is the primary indicator of halo assembly bias for a number of halo properties beyond halo mass, we then extend our analytical framework to accommodate the dependence of b1 and b2 on any such secondary property that has, or can be monotonically transformed to have, a Gaussian distribution. We demonstrate this technique for the specific case of halo concentration, finding good agreement with previous results. Our calibrations will be useful for a variety of halo model analyses focusing on galaxy assembly bias, as well as analytical forecasts of the potential for using α as a segregating variable in multitracer analyses.

Sign in / Sign up

Export Citation Format

Share Document