scholarly journals OPTIMIZATION OF PROCESS PARAMETERS OF PELLETIZER FOR AGROPYRON SEEDS UNDER VIBRATION FORCE FIELD

2020 ◽  
Vol 60 (1) ◽  
pp. 147-154 ◽  
Author(s):  
Zhanfeng Hou ◽  
Yi Qiu ◽  
Zhi Chen ◽  
Haiyang Liu ◽  
Fang Guo ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Vibration Frequency ◽  
Tilt Angle ◽  
Seed Rate ◽  
Rotating Speed ◽  
Experimental Platform ◽  
Single Seed ◽  
The Poor ◽  
Optimization Of Process Parameters

In order to solve the poor pelleting quality of Agropyron seeds, this paper designs a novel pelleting experimental platform. A regression mathematical model of pelleting qualified rate and single seed rate was established and analysed by variance. The results showed that vibration had significant effect on pelleting quality. The order of influence is as follows: rotating speed>vibration frequency> tilt angle of coater. When the speed is 41.7 r/min, the vibration frequency is 20.28 Hz, and the tilt angle is 34.89 °, the pelleting qualified rate and the single seed rate are the highest, 83.1% and 94.9% respectively

scholarly journals NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON PELLETING MOTION LAW OF AGROPYRON SEEDS UNDER VIBRATION FORCE FIELD

2020 ◽  
pp. 299-308
Author(s):  
Zhanfeng Hou ◽  
Yi Qiu ◽  
Zhi Chen ◽  
Lijie Chen ◽  
Shao Zhiwei
Keyword(s):  
Compressive Strength ◽  
Vibration Frequency ◽  
Tilt Angle ◽  
Rotational Speed ◽  
Simulation Software ◽  
Movement Trajectory ◽  
Seed Rate ◽  
Single Seed ◽  
Working Parameters ◽  
Main Factor

In order to improve the pelleting effect of Agropyron seeds, the pelleting experiment was conducted under different working parameters. In this paper, the discrete element simulation software EDED was used to establish the simulation model, and the influence of the vibration frequency of coater, the tilt angle of coater, and the rotational speed of coater on the movement trajectory of the Agropyron population were analysed. The simulation results show that the rotational speed is 40r/min, the tilt angle is 35° and the vibration frequency is 20 Hz, and the amplitude is 2 mm, the optimal trajectory of Agropyron population is obtained. The orthogonal experiment of 3 factors (vibration frequency of coater, rotational speed of coater, tilt angle of coater) and 5 levels were designed. The working parameters of pelleting Agropyron seeds were optimized by investigating the 4 indexes of compressive strength, seed rate, single seed rate and pelleting qualified rate. The results show that the vibration is the main factor affecting the compressive strength and single seed rate, the rotational speed is the main factor affecting the seed rate, and the inclination angle is the main factor affecting the pelleting rate. The optimal parameters are as follows: the rotational speed is 40r/min, the tilt angle is 35° and the vibration frequency is 20Hz.

Mathematic Model of Displacement Control Unit for Screw Distributor of Asphalt Paver

2013 ◽  
Vol 774-776 ◽  
pp. 295-298
Author(s):  
Zhi Nan Mi ◽  
Long An Chen ◽  
Jia Tao Tang
Keyword(s):  
Mathematical Model ◽  
Hydraulic System ◽  
Control Unit ◽  
Mathematic Model ◽  
Displacement Control ◽  
Rotating Speed ◽  
Dynamical Characteristics ◽  
Inertial Element ◽  
The Mathematical Model

Displacement control unit is an important part of hydraulic system for screw distributor. By adjusting the angle of swashplate, it can change the flow rate of pump and rotating speed of screw distributor. The rotating speed of screw distributor has influence on quality of road. The mathematical model of displacement control unit is presented. Its dynamical characteristics are analyzed. The mathematical model includes a reset spring gradient. The reset spring gradient is much smaller than the hydraulic spring rate, the effect of the reset spring gradient can be neglected. So an inertial element can be substituted by an integration element.

scholarly journals NUMERICAL SIMULATION AND EXPERIMENT OF VIBRATION PELLETIZER BASED ON EDEM

2021 ◽  
pp. 469-478
Author(s):  
Nianzu Dai ◽  
Zhanfeng Hou ◽  
Yi Qiu ◽  
Xiwen Zhang
Keyword(s):  
Numerical Simulation ◽  
Force Field ◽  
Vibration Frequency ◽  
Tilt Angle ◽  
Rotation Speed ◽  
Orthogonal Experiment ◽  
Single Factor ◽  
Powder Mixing ◽  
Simulation And Experiment

In order to quantitatively describe the influence between the mixing process and the pelleting quality of the vibration pelletizer, this paper uses EDEM to conduct a numerical simulation study on the uniformity of the seeds and powder mixing of the pelleting machine under vibration force field. Meanwhile, a single factor test was established to verify the feasibility of numerical simulation. The results show that the coefficient of variation CV is the smallest and the mixing uniformity between the seeds and powder is the highest when the vibration frequency is 20Hz, the rotation speed is 45r/min, the tilt angle is 40° during numerical simulation. The pelleting qualified rate J and single seed rate P as the test index of the mixing uniformity of seed pelleting shows the optimum value in the single factor test, EDEM can be used to analyse the mixing uniformity and pelleting quality in pelletizer. The results of orthogonal experiment indicated that the best combination of parameters was obtained as follows: vibration frequency of 20Hz, rotation speed of 45r/min and tilt angle of 40°, the mixing uniformity of seeds and powder and the pelleting quality of Agropyron seeds are the highest. This study can effectively provide reference for design of pelleting machine of small seeds under vibration force field.

HUBUNGAN PERAN FAMILY CAREGIVER TERHADAP QUALITAS HIDUP LANSIA

2019 ◽  
Vol 11 (1) ◽  
pp. 51-56
Author(s):  
RIANI PRADARA JATI ◽  
Sekar Farah Nabila
Keyword(s):  
Quality Of Life ◽  
Family Caregiver ◽  
Random Sampling ◽  
Simple Random Sampling ◽  
The Elderly ◽  
Chi Square ◽  
The Poor ◽  
The Family

  Penempatan peran yang baik bagi Family Caregiver sangatlah membantu lansia dalam meningkatkah qualitas hidupnya, meningkatkan motivasi dalam menjalankan hidup Penelitian ini bertujuan Mengetahui hubungan peran Family Caregiver dalam pemenuhan qualitas hidup bagi lansia di Kelurahan Langenharjo Kabupaten Kendal. DesainPenelitianDeskriptifKorelasional menggunakan pendekatan Krosectional,tehnikSamplingStratified Simple Random Sampling dengan karakteristik heterogen, dari populasi mempunyai hak yang sama untuk diseleksi sebagai sampel teknik undianPengambilan data dengan menggunakan kuesioner yang telah diuji validitas dan reliabilitasnya. Uji statistik Chi-square, dengan taraf signifikasi 5%jumlah sampel pada penelitian ini 70 sampel pada Family Caregiver dari 213 populasi yang ada. Hasil penelitian dari 70 responden didapatkan Peran Family Caregiver tidak baik dengan qualitas hidup tidak baik 33 (47,1%), sedangkan Peran Family Caregiver kurang baik dengan qualitas hidup lansia baik 3 (4,3%). Untuk distribusi Peran Family Caregiver kurang baik dengan qualitas hidup lansia tidak baik sebanyak 6 responden (8,6%) sedangkan untuk distribusi Peran Family Caregiver kurang baik dengan qualitas hidup lansia baik sebanyak 23 responden (32,9%). Terakhir, untuk distribusi Peran Family Caregiver baik dengan qualitas hidup lansia tidak baik didapatkan hasil 2 responden (2, 9%) sedangkan untuk distribusi Peran Family Caregiver baik dengan qualitas hidup lansia baik didapatkan hasil 3 responden (4,3%)Menunjukkan nilai ρ value 0,001 (ρ < 0,05) berarti ada hubungan antara dukungan keluarga dengan kepatuhan lansia dalam keikutsertaan posyandu lansia. Disarankan kepada semua Family Cregiver lansia untuk mampu memahami pentingnya perhatian, dukungan bagi lansia dalammeningkatkan qualitas hidup yang lebih baik bagi lansia.   Kata kunci : Peran family caregiver, qualitas hidup, lansia.   ABSTRACT Placement of a good role for Family Caregiver is very helpful for the elderly to improve their quality of life, increase motivation in living life Research Objective: To know the relationship between the role of Family Caregiver in fulfilling quality of life for the elderly in Langenharjo Village, Kendal Regency. Descriptive Correlational Research Design uses a cross sectional approach, Sampling Stratified Simple Random Sampling technique with heterogeneous characteristics, from the population has the same right to be selected as a sample lottery technique Retrieving data using a questionnaire that has been tested for validity and reliability. Test Chi-square statistics, with a significance level of 5% the number of samples in this study 70 samples on the Family Caregiver from 213 populations. Results of the Study Of 70 respondents found the role of Family Caregiver was not good with poor quality of life 33 (47.1%) , while the role of the Family Caregiver is not good with the quality of life of a good elderly 3 (4.3%). For the distribution of the role of Family Caregiver is not good with the quality of life of the poor family as many as 6 respondents (8.6%) while for the distribution of the Role of Family Caregiver is not good with the quality of life of good elderly as many as 23 respondents (32.9%). Finally, the distribution of the Role of Family Caregiver with good quality of life for the poor is obtained by 2 respondents (2, 9%), while the distribution of the Role of Family Caregiver with good quality of life for the elderly is obtained by 3 respondents (4.3%). 0.001 (ρ <0.05) means that there is a relationship between family support and the compliance of the elderly in the participation of the elderly posyandu. It is recommended to all elderly Cregiver families to be able to understand the importance of attention, support for the elderly in improving the quality of life better for the elderly   Keywords: Role of Family Caregiver, Quality of Life, Elderly

An experience of performing spirometry by trained general practitioners

2020 ◽  
pp. 34-36
Author(s):  
M. A. Pokhaznikova ◽  
E. A. Andreeva ◽  
O. Yu. Kuznetsova
Keyword(s):  
General Practitioners ◽  
Quality Criteria ◽  
Poor Quality ◽  
Male Gender ◽  
Study Research ◽  
The Poor ◽  
Quality Of Research ◽  
Forced Expiratory Maneuver ◽  
Maximal Effort

The article discusses the experience of teaching and conducting spirometry of general practitioners as part of the RESPECT study (RESearch on the PrEvalence and the diagnosis of COPD and its Tobacco-related aetiology). A total of 33 trained in spirometry general practitioners performed a study of 3119 patients. Quality criteria met 84.1% of spirometric studies. The analysis of the most common mistakes made by doctors during the forced expiratory maneuver is included. The most frequent errors were expiration exhalation of less than 6s (54%), non-maximal effort throughout the test and lack of reproducibility (11.3%). Independent predictors of poor spirogram quality were male gender, obstruction (FEV1 /FVC<0.7), and the center where the study was performed. The number of good-quality spirograms ranged from 96.1% (95% CI 83.2–110.4) to 59.8% (95% CI 49.6–71.4) depending on the center. Subsequently, an analysis of the reasons behind the poor quality of research in individual centers was conducted and the identified shortcomings were eliminated. The poor quality of the spirograms was associated either with the errors of the doctors who undertook the study or with the technical malfunctions of the spirometer.

Multifactor mathematical model of criticality of welding process of products from aluminum- magnesium alloys

2020 ◽  
pp. 12-18
Author(s):  
F.A. Urazbahtin ◽  
A.YU. Urazbahtina
Keyword(s):  
Mathematical Model ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Welding Process ◽  
Welding Equipment ◽  
Equipment Operation ◽  
Aluminum Magnesium Alloys ◽  
Aluminum Magnesium Alloy ◽  
Welding Materials

A multifactor mathematical model of the welding process of products from aluminum-magnesium alloys, consisting of 71 indicators that assess the quality of the weld, the welding process, costs, equipment operation and quality of the welded material. The model can be used to control and optimize the welding process of products from aluminum-magnesium alloys. Keywords welding, products, aluminum-magnesium alloy, indicators, process parameters, welding equipment, welding materials, electrode sharpening, lining [email protected]

Network analysis models – the secret for success

2004 ◽  
Vol 4 (5-6) ◽  
pp. 383-388
Author(s):  
D.M. Rogers
Keyword(s):  
Mathematical Model ◽  
Field Data ◽  
Essential Element ◽  
Distribution Networks ◽  
Automatic Calibration ◽  
Supply And Distribution ◽  
The World ◽  
Optimum Approach ◽  
Analysis Models

Water is a fundamental necessity of life. Yet water supply and distribution networks the world over are old and lacking in adequate maintenance. Consequently they often leak as much water as they deliver and provide an unacceptable quality of service to the customer. In certain parts of the world, water is available only for a few hours of the day. The solution is to build a mathematical model to simulate the operation of the real network in all of its key elements and apply it to optimise its operation. To be of value, the results of the model must be compared with field data. This process is known as calibration and is an essential element in the construction of an accurate model. This paper outlines the optimum approach to building and calibrating a mathematical model and how it can be applied to automatic calibration systems.

Supply Chain Integration: Establish the Appropriate Challenges in Improving Integrated SC in an Innovative Approach of IBS

2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Ani Saifuza Abd Shukor ◽  
Muhammad Fadhil Muhammad ◽  
Shamsida Saidan Khaderi ◽  
Faridah Muhammad Halil
Keyword(s):  
Supply Chain ◽  
System Integration ◽  
Publishing House ◽  
Structured Interview ◽  
Poor Quality ◽  
Supply Chain Integration ◽  
Project Environment ◽  
The Poor ◽  
International Publishing

The shift to an integrated IBS construction approach requires enhanced supply chain integration to improve the productivity as well as the poor quality of human behavioual aspect in IBS project. This paper is to identify the challenges at each tier between players to facilitate supply chain integration among the IBS players. Findings adopted from semi-structured interview revealed the critical attitude issues of human factors, lack of interaction and sharing knowledge between interdisciplinary people. The findings of this study is useful to improve integration of supply chain and enhance innovation and sharing interaction between players in the IBS Malaysian construction project environment.© 2016. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK. Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.Keywords: Construction Environment; Industrialised Building System; Integration and Supply Chain 

Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom

2013 ◽  
Vol 652-654 ◽  
pp. 2450-2454
Author(s):  
Zhi Hong Zhang ◽  
Guo Guang Cheng
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Electromagnetic Stirring ◽  
Center Line ◽  
Central Segregation

The paper describes multi-section round bloom casting using external MEMS, equipped with max section D600mm and min D280mm mold, the center line of D280mm mold not coincident with the axis of stirrer coils. it is exist eccentric electromagnetic stirring of mold which section less than max D600mm, a mathematical model of MEMS has been established, the index of central segregation of D280mm macrostructure had decreased less than 1.12 by optimized parameters of electromagnetic stirring and SEN immerse depth, in the end, the quality of round bloom had improved.

Usability of India’s government statistics1

2020 ◽  
pp. 1-17
Author(s):  
Vikas Kumar
Keyword(s):  
National Sample ◽  
Poor Quality ◽  
Sample Surveys ◽  
Sources Of Information ◽  
Cross Sectional ◽  
Jammu And Kashmir ◽  
The Poor ◽  
Government Statistics

The quality of metadata is a crucial determinant of usability/interpretability of data. This paper draws attention to the poor quality of India’s government statistics and the paucity of metadata necessary to understand the problems. The paper suggests that there has been a decline in India both in terms of the availability and quality of metadata for key government sources of information including maps, decennial population censuses and National Sample Surveys amidst growing sophistication in the understanding of metadata. The poor quality of metadata impairs cross-sectional as well as inter-temporal comparisons and policymaking apart from concealing biases and lapses of government statisticians. The paper draws on the experience of three states – erstwhile Jammu and Kashmir, Manipur and Nagaland – where government statistics have been affected by serious errors that are not well-understood due to the lack of adequate metadata.

Sign in / Sign up

Export Citation Format

Share Document