scholarly journals Qualitative Evaluation of Greenhouse Gas Emission Footprints from Surface Excavation

2019 ◽  
Vol 8 (12) ◽  
pp. 2498-2502
Keyword(s):  
Greenhouse Gas ◽  
Greenhouse Gas Emission ◽  
Ghg Emissions ◽  
Qualitative Evaluation ◽  
Project Planning ◽  
Pipe Material ◽  
Low Carbon ◽  
Comprehensive Overview ◽  
Need To Evaluate ◽  
Surface Excavation

With growing concerns about global warming and greenhouse gas (GHG) emissions, there is an urgent need to evaluate and reduce the carbon footprint (CF) of surface excavation (SE). CF are GHG emissions caused by an activity or event. It is expressed in terms of the amount of carbon dioxide (COR2 R), or its equivalent of other emitted GHGs. Choosing an appropriate low-carbon emission method for SE is a vital task and involves environmental concerns due to several energy-consuming activities. Since essentially, every SE impacts the environment, it becomes very important to evaluate this impact and take necessary actions to minimize any negative consequence. The objective of this paper is to present a comprehensive overview on progress acquired over the years in understanding GHG emissions from SE and to discuss the steps in CF estimation. Publications were identified that reported GHG emissions and CF of SE over past 30 years. This literature review suggests that for most of the SE, the material production phase consumes a large amount of energy and is a major contributor of GHG emissions. Early phases of project planning should include appropriate ecological decisions consistent with the life-cycle assessment (LCA) and CF considerations. Pipe material and outside diameter should be considered during the SE to allow a detailed evaluation and reduction of their environmental impacts (EI). Incorporation of additional factors, such as cost and duration of the project into the environmental analysis is also recommended.

scholarly journals Fisheries: A Missing Link in Greenhouse Gas Emission Policies in South Korea

2021 ◽  
Vol 13 (11) ◽  
pp. 5858
Author(s):  
Kyumin Kim ◽  
Do-Hoon Kim ◽  
Yeonghye Kim
Keyword(s):  
Greenhouse Gas ◽  
Greenhouse Gas Emission ◽  
Ghg Emissions ◽  
Bioeconomic Model ◽  
Negative Externalities ◽  
Fishing Vessel ◽  
Gas Emission ◽  
Fishing Vessels ◽  
The Government ◽  
Different Levels

Recent studies demonstrate that fisheries are massive contributors to global greenhouse gas (GHG) emissions. The average Korean fishing vessel is old, fuel-inefficient, and creates a large volume of emissions. Yet, there is little research on how to address the GHG emissions in Korean fisheries. This study estimated the change in GHG emissions and emission costs at different levels of fishing operations using a steady-state bioeconomic model based on the case of the Anchovy Tow Net Fishery (ATNF) and the Large Purse Seine Fishery (LPSF). We conclude that reducing the fishing efforts of the ATNF and LPSF by 37% and 8% respectively would not only eliminate negative externalities on the anchovy and mackerel stock respectively, but also mitigate emissions and emission costs in the fishing industry. To limit emissions, we propose that the Korean government reduce fishing efforts through a vessel-buyback program and set an annual catch limit. Alternatively, the government should provide loans for modernizing old fishing vessels or a subsidy for installing emission abatement equipment to reduce the excessive emissions from Korean fisheries.

scholarly journals LEAP-Based Greenhouse Gases Emissions Peak and Low Carbon Pathways in China’s Tourist Industry

2021 ◽  
Vol 18 (3) ◽  
pp. 1218
Author(s):  
Dandan Liu ◽  
Dewei Yang ◽  
Anmin Huang
Keyword(s):  
Greenhouse Gas ◽  
Global Climate ◽  
Ghg Emissions ◽  
Control Measures ◽  
Growth Potential ◽  
Planning System ◽  
Tourist Industry ◽  
Low Carbon ◽  
Carbon Reduction ◽  
Co2 Equivalent

China has grown into the world’s largest tourist source market and its huge tourism activities and resulting greenhouse gas (GHG) emissions are particularly becoming a concern in the context of global climate warming. To depict the trajectory of carbon emissions, a long-range energy alternatives planning system (LEAP)-Tourist model, consisting of two scenarios and four sub-scenarios, was established for observing and predicting tourism greenhouse gas peaks in China from 2017 to 2040. The results indicate that GHG emissions will peak at 1048.01 million-ton CO2 equivalent (Mt CO2e) in 2033 under the integrated (INT) scenario. Compared with the business as usual (BAU) scenario, INT will save energy by 24.21% in 2040 and reduce energy intensity from 0.4979 tons of CO2 equivalent/104 yuan (TCO2e/104 yuan) to 0.3761 Tce/104 yuan. Although the INT scenario has achieved promising effects of energy saving and carbon reduction, the peak year 2033 in the tourist industry is still later than China’s expected peak year of 2030. This is due to the growth potential and moderate carbon control measures in the tourist industry. Thus, in order to keep the tourist industry in synchronization with China’s peak goals, more stringent measures are needed, e.g., the promotion of clean fuel shuttle buses, the encouragement of low carbon tours, the cancelation of disposable toiletries and the recycling of garbage resources. The results of this simulation study will help set GHG emission peak targets in the tourist industry and formulate a low carbon roadmap to guide carbon reduction actions in the field of GHG emissions with greater certainty.

scholarly journals Greenhouse gas emissions profiles of neighbourhoods in Durban, South Africa – an initial investigation

2017 ◽  
Vol 30 (1) ◽  
pp. 191-214 ◽  
Author(s):  
Meryl Jagarnath ◽  
Tirusha Thambiran
Keyword(s):  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Mitigation Strategies ◽  
Low Carbon ◽  
Economic Activities ◽  
Emissions Inventory ◽  
High Emission ◽  
Development Goals ◽  
Reduce Emissions ◽  
The City

Because current emissions accounting approaches focus on an entire city, cities are often considered to be large emitters of greenhouse gas (GHG) emissions, with no attention to the variation within them. This makes it more difficult to identify climate change mitigation strategies that can simultaneously reduce emissions and address place-specific development challenges. In response to this gap, a bottom-up emissions inventory study was undertaken to identify high emission zones and development goals for the Durban metropolitan area (eThekwini Municipality). The study is the first attempt at creating a spatially disaggregated emissions inventory for key sectors in Durban. The results indicate that particular groups and economic activities are responsible for more emissions, and socio-spatial development and emission inequalities are found both within the city and within the high emission zone. This is valuable information for the municipality in tailoring mitigation efforts to reduce emissions and address development gaps for low-carbon spatial planning whilst contributing to objectives for social justice.

scholarly journals Competency Gaps of Employees in the Construction Sector in Terms of the Requirements of a Low-Carbon Economy. Polish and Czech Case

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7868
Author(s):  
Honorata Howaniec ◽  
Łukasz Krzysztof Wróblewski ◽  
Hana Štverková
Keyword(s):  
Greenhouse Gas ◽  
Construction Industry ◽  
Greenhouse Gas Emission ◽  
Negative Impact ◽  
Modern Society ◽  
Construction Sector ◽  
Low Carbon ◽  
Low Carbon Economy ◽  
Low Emission ◽  
Carbon Economy

Environmental policy obliges modern society to transition to a low-carbon economy. After entering to life, the Paris Agreement obligated the signatories to prepare the first nationally determined contributions (NDCs). The NDCs aim first to reduce greenhouse gas emission targets under the UNFCCC and they apply equally to both developed and developing countries. Countries voluntarily indicate what actions will be taken to achieve the declared goals. The construction sector is an industry that is under scrutiny due to its negative impact on the environment, but it also has the potential to reduce it. Activities that can reduce greenhouse gas emissions can be carried out at various levels in the construction industry. One of them is the appropriate preparation of the staff, including equipping them with the so-called green skills. This research aimed to determine the competency gaps of people employed in the construction industry, including competencies in the field of low-emission economy. For the purposes of the study, a questionnaire survey was carried out in Poland and the Czech Republic and based on the results obtained the appropriate competencies were determined that should be possessed by people employed in the construction sector, including competencies related to a low-emission economy. Competency profiles for people employed in the construction sector were built and competency gaps of these people were determined. In both countries, no competencies have been identified in any of checked areas that meet or exceed the requirements of managers according to specific competency profiles.

scholarly journals A Review of Geothermal Technologies and Their Role in Reducing Greenhouse Gas Emissions in the USA

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Philip J. Ball
Keyword(s):  
Greenhouse Gas ◽  
Power Plants ◽  
Carbon Tax ◽  
Ghg Emissions ◽  
Abatement Cost ◽  
Combined Cycle ◽  
Low Carbon ◽  
Geothermal Heat ◽  
The Cost

Abstract A review of conventional, unconventional, and advanced geothermal technologies highlights just how diverse and multi-faceted the geothermal industry has become, harnessing temperatures from 7 °C to greater than 350 °C. The cost of reducing greenhouse emissions is examined in scenarios where conventional coal or combined-cycle gas turbine (CCGT) power plants are abated. In the absence of a US policy on a carbon tax, the marginal abatement cost potential of these technologies is examined within the context of the social cost of carbon (SCC). The analysis highlights that existing geothermal heat and power technologies and emerging advanced closed-loop applications could deliver substantial cost-efficient baseload energy, leading to the long-term decarbonization. When considering an SCC of $25, in a 2025 development scenario, geothermal technologies ideally need to operate with full life cycle assessment (FLCA) emissions, lower than 50 kg(CO2)/MWh, and aim to be within the cost range of $30−60/MWh. At these costs and emissions, geothermal can provide a cost-competitive low-carbon, flexible, baseload energy that could replace existing coal and CCGT providing a significant long-term reduction in greenhouse gas (GHG) emissions. This study confirms that geothermally derived heat and power would be well positioned within a diverse low-carbon energy portfolio. The analysis presented here suggests that policy and regulatory bodies should, if serious about lowering carbon emissions from the current energy infrastructure, consider increasing incentives for geothermal energy development.

Impacts of Government Policies, Fuel Cell Cost, and Battery Cost on Greenhouse Gas Emission of Light-Duty Vehicles

2013 ◽  
Author(s):  
Swithin S. Razu ◽  
Shun Takai
Keyword(s):  
Public Policy ◽  
Fuel Cell ◽  
Greenhouse Gas ◽  
Greenhouse Gas Emission ◽  
Ghg Emissions ◽  
Government Policies ◽  
Alternative Fuel Vehicles ◽  
Enterprise Model ◽  
The Government ◽  
The Impact

The aim of this paper is to study the impact of public government policies, fuel cell cost, and battery cost on greenhouse gas (GHG) emissions in the US transportation sector. The model includes a government model and an enterprise model. To examine the effect on GHG emissions that fuel cell and battery cost has, the optimization model includes public policy, fuel cell and battery cost, and a market mix focusing on the GHG effects of four different types of vehicles, 1) gasoline-based 2) gasoline-electric hybrid or alternative-fuel vehicles (AFVs), 3) battery-electric (BEVs) and 4) fuel-cell vehicles (FCVs). The public policies taken into consideration are infrastructure investments for hydrogen fueling stations and subsidies for purchasing AFVs. For each selection of public policy, fuel cell cost and battery cost in the government model, the enterprise model finds the optimum vehicle design that maximizes profit and updates the market mix, from which the government model can estimate GHG emissions. This paper demonstrates the model using FCV design as an illustrative example.

Fuel reduction burning mitigates wildfire effects on forest carbon and greenhouse gas emission

2014 ◽  
Vol 23 (6) ◽  
pp. 771 ◽  
Author(s):  
Liubov Volkova ◽  
C. P. Mick Meyer ◽  
Simon Murphy ◽  
Thomas Fairman ◽  
Fabienne Reisen ◽  
...  
Keyword(s):  
Greenhouse Gas ◽  
Greenhouse Gas Emission ◽  
Soil Depth ◽  
Ghg Emissions ◽  
Forest Carbon ◽  
Fuel Reduction ◽  
Emission Mitigation ◽  
Complete Combustion ◽  
Eucalyptus Forest ◽  
Eastern Australia

A high-intensity wildfire burnt through a dry Eucalyptus forest in south-eastern Australia that had been fuel reduced with fire 3 months prior, presenting a unique opportunity to measure the effects of fuel reduction (FR) on forest carbon and greenhouse gas (GHG) emissions from wildfires at the start of the fuel accumulation cycle. Less than 3% of total forest carbon to 30-cm soil depth was transferred to the atmosphere in FR burning; the subsequent wildfire transferred a further 6% to the atmosphere. There was a 9% loss in carbon for the FR–wildfire sequence. In nearby forest, last burnt 25 years previously, the wildfire burning transferred 16% of forest carbon to the atmosphere and was characterised by more complete combustion of all fuels and less surface charcoal deposition, compared with fuel-reduced forest. Compared to the fuel-reduced forests, release of non-CO2 GHG doubled following wildfire in long-unburnt forest. Although this is the maximum emission mitigation likely within a planned burning cycle, it suggests a significant potential for FR burns to mitigate GHG emissions in forests at high risk from wildfires.

Carbon Footprint Analysis of an Educational Institution

2015 ◽  
Vol 787 ◽  
pp. 187-191
Author(s):  
P.M. Sivaram ◽  
N. Gowdhaman ◽  
D.Y. Ebin Davis ◽  
M. Subramanian
Keyword(s):  
Greenhouse Gas ◽  
Carbon Footprint ◽  
Greenhouse Gas Emission ◽  
Educational Institution ◽  
Ghg Emissions ◽  
Liquefied Petroleum Gas ◽  
Diesel Generator ◽  
Working Paper ◽  
Corporate Carbon Footprint ◽  
The Impact

Global warming and climate change are the foremost environmental challenges facing the world today. It is our responsibility to minimize the consumption of energy and hence reduce the emissions of greenhouse gases. Companies choose ‘Carbon Footprint’ as a tool to calculate the greenhouse gas emission to show the impact of their activities on the environment. In this working paper, we assess the carbon foot print of an educational institution and suggest suitable measures for reducing it. Greenhouse gas emitting protocol for an academic institution in terms of tones of equivalent CO2 per year is projected using three basic steps includes planning (assessment of data’s), calculation and estimation of CO2 emitted. The estimation of carbon foot print is calculated by accounting direct emission from sources owned/controlled by the educational institution and from indirect emission i.e. purchased electricity, electricity produced by diesel Generator (DG), transport, cooking (Liquefied Petroleum Gas) and other outsourced distribution. The CO2 absorbed by trees are also accounted. Some of the options are identified in order to reduce CO2 level. The information of corporate carbon footprint helps us identifying the Green House Gases (GHG) emission “hot spots” and identifies where the greatest capacity exists in order to reduce the GHG emissions. The main prioritization goes to transport and then followed by DG, cooking and then electricity. The per capita CO2 emission and the total CO2 emission for a typical educational institution are estimated.

scholarly journals CONSUMPTION-BASED AND EMBODIED CARBON IN THE BUILT ENVIRONMENT: IMPLICATIONS FOR APEC’S LOW-CARBON MODEL TOWN PROJECT

2020 ◽  
Vol 15 (3) ◽  
pp. 67-82
Author(s):  
David A. Ness ◽  
Ke Xing
Keyword(s):  
Sustainable Development ◽  
Built Environment ◽  
Greenhouse Gas ◽  
Fossil Fuels ◽  
Energy Use ◽  
Ghg Emissions ◽  
Assessment Tools ◽  
Asia Pacific ◽  
Low Carbon ◽  
Embodied Carbon

ABSTRACT In accordance with international protocols and directions, the APEC Energy Working Group has concentrated on constraining operational energy use and greenhouse gas (GHG) emissions in cities across the Asia Pacific, especially from the widespread consumption of fossil fuels. In addition to economy level policies and recognising the different characteristics within the region, APEC has sought to take action at the town/city level via the Low-Carbon Model Town (LCMT) project, including the development of self-assessment tools and indicator systems. However, the “low carbon” landscape is changing. There is increasing recognition of embodied carbon, accompanied by the emergence of methods for its measurement, while the C40 Cities Climate Leadership Group has recently highlighted the significance of consumption-based carbon. Similarly, the Greenhouse Gas Protocol for Cities (GPC) is likely to extend its ambit from Scope 1 GHG emissions, derived from energy use within a city boundaries, and Scope 2 emissions from grid-supplied electricity, heating and / or cooling, to Scope 3 emissions derived from materials and goods produced outside the boundaries of a city but associated with construction within that city. After describing these emerging approaches and the current landscape, the paper examines the significance and implications of these changes for APEC approaches, especially in relation to the LCMT project, its indicators and the varying characteristics of towns and cities within the Asia-Pacific region. Special attention is given to the built environment, which is known to be a major contributor to operational and embodied emissions. Consistent with the theme of the Asia-Pacific Energy Sustainable Development Forum covering “sustainable development of energy and the city,” a case is put forward for the current APEC approach to be extended to encompass both embodied and consumption-based emissions.

scholarly journals Achieving Net Zero Emissions Requires the Knowledge and Skills of the Oil and Gas Industry

2020 ◽  
Vol 2 ◽  
Author(s):  
Astley Hastings ◽  
Pete Smith
Keyword(s):  
Carbon Dioxide ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Carbon Capture ◽  
Oil And Gas ◽  
Ghg Emissions ◽  
Anthropogenic Activity ◽  
Low Carbon ◽  
Net Zero ◽  
Low Carbon Energy

The challenge facing society in the 21st century is to improve the quality of life for all citizens in an egalitarian way, providing sufficient food, shelter, energy, and other resources for a healthy meaningful life, while at the same time decarbonizing anthropogenic activity to provide a safe global climate, limiting temperature rise to well-below 2°C with the aim of limiting the temperature increase to no more than 1.5°C. To do this, the world must achieve net zero greenhouse gas (GHG) emissions by 2050. Currently spreading wealth and health across the globe is dependent on growing the GDP of all countries, driven by the use of energy, which until recently has mostly been derived from fossil fuel. Recently, some countries have decoupled their GDP growth and greenhouse gas emissions through a rapid increase in low carbon energy generation. Considering the current level of energy consumption and projected implementation rates of low carbon energy production, a considerable quantity of fossil fuels is projected to be used to fill the gap, and to avoid emissions of GHG and close the gap between the 1.5°C carbon budget and projected emissions, carbon capture and storage (CCS) on an industrial scale will be required. In addition, the IPCC estimate that large-scale GHG removal from the atmosphere is required to limit warming to below 2°C using technologies such as Bioenergy CCS and direct carbon capture with CCS to achieve climate safety. In this paper, we estimate the amount of carbon dioxide that will have to be captured and stored, the storage volume, technology, and infrastructure required to achieve the energy consumption projections with net zero GHG emissions by 2050. We conclude that the oil and gas production industry alone has the geological and engineering expertise and global reach to find the geological storage structures and build the facilities, pipelines, and wells required. Here, we consider why and how oil and gas companies will need to morph from hydrocarbon production enterprises into net zero emission energy and carbon dioxide storage enterprises, decommission facilities only after CCS, and thus be economically sustainable businesses in the long term, by diversifying in and developing this new industry.

Sign in / Sign up

Export Citation Format

Share Document