scholarly journals EFFECT OF NOZZLE TYPE AND SOME LOCALLY USED SURFACTANTS ON THE SPRAY QUALITY

2020 ◽  
Vol 51 (3) ◽  
pp. 856-864
Author(s):  
Subr & et al.
Keyword(s):  
Penetration Rate ◽  
Droplet Diameter ◽  
Middle Level ◽  
Control Treatment ◽  
Tween 20 ◽  
Spray Solution ◽  
Spray Density ◽  
Dishwashing Detergent ◽  
And Control

This study was aimed to compare two spreading agents (Tween 20 (T) and dishwashing detergent (D)) which are commonly used in agricultural researches in Iraq and sometimes are used by the local spray applicators. Moreover, the universalflat fan nozzle (UNI) was compared with the air induction nozzle (AI) concerning the quality of the spray produced. The treatments included three concentrations (1.0%; 0.1% and 0.01% vol /vol %) of each spreading material beside the control treatment (water only). Spray quality was evaluated by using the water sensitive papers (WSP), and DepositScan software was used to analyze the scanned photos of WSP. Theevaluated parameters related to the spray quality included: spray coverage (%); spray density (Deposits/cm²); average droplet diameter (DV.5) and deposition of droplets (µL/cm²). Moreover, the penetration rate was also calculated by comparing the deposition quantity between two levels of WSP on the plant canopy (upper and middle level) while the deposition which reached the ground was considered as losses rate. The results have shown that adding Tween 20 spreading agent to the spray solution has produced more deposits per square centimeter and more penetration rate of spray inside the plants canopy than the detergent and control. Moreover, the UNI type nozzle produced higher coverage percentage and number of deposits per square centimeter than AI nozzle.

Effect of Mechanical Damages and Storage Conditions on Quality of Markies cv. Potatoes for Processing

2019 ◽  
pp. 1-5
Author(s):  
Dreice Nascimento Gonçalves ◽  
Luciana Gomes Soares ◽  
Ariana Mota Pereira ◽  
Paula Acácia Silva Ramos ◽  
Maria Eduarda Da Silva Guimarães ◽  
...  
Keyword(s):  
Soluble Sugar ◽  
Mechanical Damage ◽  
Storage Conditions ◽  
Reducing Sugar ◽  
Control Treatment ◽  
Experimental Unit ◽  
Total Soluble Sugar ◽  
And Control ◽  
And Storage

Aims: Evaluate whether mechanical damage and storage conditions affect the quality of the ‘Markies’ potato for processing. Study Design: The experimental design was the completely randomized, in the scheme of split-plots. The plots were composed of treatments with and without mechanical damage and the subplots were made up by the evaluation times, with 5 replicates, where the experimental unit was composed of 2 tubers. Place and Duration of Study: Tubers of the ‘Markies’ cultivar from the producing region of Perdizes, State of Minas Gerais, were planted in June 2016 and harvested in October 2016. Methodology: The tubers were stored for 2 months at 8°C, and further divided into treatment with damage, in which the tubers were subjected to impact and abrasion; and control treatment, in which the tubers were not damaged. After that, they were stored at 28°C and evaluated for their loss of loss of accumulated fresh mass (FML), total soluble sugar (TSS), reducing sugar (RS), non-reducing sugar (NRS) and color after frying in the periods of 0, 12, 24, 36 and 48 h after being placed at room temperature. Results: The mechanical damage in the tubers increased FML, however, it did not affect the content of TSS, NRS, RS and color after frying. Increases were observed in the content of TSS and NRS after 12 h of evaluation. Grade 2 was assigned to the coloring scale after frying for the tubers regardless of treatment or evaluation period. Conclusion: Mechanical damage increases the FML and the ‘Markies’ cultivar is suitable for the industry of pre-fried potato processing even under the occurrence of mechanical damage and exposure to high temperatures.

scholarly journals Influence of Pollination Technique on Greenhouse Tomato Production

2003 ◽  
Vol 8 (1) ◽  
pp. 21 ◽  
Author(s):  
I.K. Nazer ◽  
M.A. Kasrawi ◽  
Y.Z. Al-Attal
Keyword(s):  
Specific Gravity ◽  
Fruit Set ◽  
Fruit Size ◽  
Fruit Weight ◽  
Control Treatment ◽  
Tomato Production ◽  
Greenhouse Tomato ◽  
Natural Pollination ◽  
And Control

An experiment was carried out to study the effects of four pollination techniques; Bumblebees (Bombus terrerstris L.), plant growth bioregulator (PGB) (Parachlorophenoxy acetic acid), hand vibration, and control (natural pollination) on tomato (Lycopersicon esculentum Mill) production in greenhouses. Bumblebees showed no problem in visiting flowers at a temperature range of 17-42°C during the day and 2-14°C at night. Bumblebee pollinated plants produced a yield per plant which was significantly higher than plants treated with PGB, vibration and the control, respectively. Fruit set of tomato flowers over 10 clusters was 99.1, 96.7, 76.7, and 65.7% for bumblebee treatment, PGB application, vibration and the control, respectively. In the bumblebee pollinated flowers, the quality of fruits was superior. The fruits were hard, with more seeds, and had a high specific gravity and better appearance. The average fruit weight was 100.3, 80.5, 84.1, and 70.6 g for the bumblebee, PGB, vibration and the control, respectively. The PGB treatment produced bigger sized but puffy fruits (108.4 ml). While fruit size in the vibration treatment was the highest (126.8 ml), followed by the bumblebee and the control which were 99.3 and 98.5 ml, respectively. Fruit specific gravity in the bumblebee treatment was significantly higher than other treatments, with no significant differences between the PGB and the vibration treatments. The least dense fruits were in the control treatment. Regarding the firmness of fruits, the bumblebee treatment gave the hardest fruits, while the PGB and the vibration treatments were intermediate and the control was the least. Average seed number per fruit was 177.0, 86.5, 61.8, and 89.8 for bumblebee, vibration, PGB and the control, respectively. 

Resistance Monitor and Control for Vacuum Evaporation of Metals and Carbon

1976 ◽  
Vol 34 ◽  
pp. 572-573
Author(s):  
Russell L. Steere ◽  
Eric F. Erbe ◽  
J. Michael Moseley
Keyword(s):  
Electronic Device ◽  
Point Sources ◽  
High Contrast ◽  
Variable Resistor ◽  
Quality Of Results ◽  
Low Contrast ◽  
Evaporation Source ◽  
And Control ◽  
At Will

We have designed and built an electronic device which compares the resistance of a defined area of vacuum evaporated material with a variable resistor. When the two resistances are matched, the device automatically disconnects the primary side of the substrate transformer and stops further evaporation.This approach to controlled evaporation in conjunction with the modified guns and evaporation source permits reliably reproducible multiple Pt shadow films from a single Pt wrapped carbon point source. The reproducibility from consecutive C point sources is also reliable. Furthermore, the device we have developed permits us to select a predetermined resistance so that low contrast high-resolution shadows, heavy high contrast shadows, or any grade in between can be selected at will. The reproducibility and quality of results are demonstrated in Figures 1-4 which represent evaporations at various settings of the variable resistor.

Boilerplate

2012 ◽  
Author(s):  
Margaret Jane Radin
Keyword(s):  
Economic Efficiency ◽  
Analytical Framework ◽  
Daily Basis ◽  
Regulatory Agencies ◽  
Jury Trial ◽  
Comprehensive Treatment ◽  
New Methods ◽  
And Control ◽  
Fine Print

Boilerplate—the fine-print terms and conditions that we become subject to when we click “I agree” online, rent an apartment, or enter an employment contract, for example—pervades all aspects of our modern lives. On a daily basis, most of us accept boilerplate provisions without realizing that should a dispute arise about a purchased good or service, the nonnegotiable boilerplate terms can deprive us of our right to jury trial and relieve providers of responsibility for harm. Boilerplate is the first comprehensive treatment of the problems posed by the increasing use of these terms, demonstrating how their use has degraded traditional notions of consent, agreement, and contract, and sacrificed core rights whose loss threatens the democratic order. This book examines attempts to justify the use of boilerplate provisions by claiming either that recipients freely consent to them or that economic efficiency demands them, and it finds these justifications wanting. It argues that our courts, legislatures, and regulatory agencies have fallen short in their evaluation and oversight of the use of boilerplate clauses. To improve legal evaluation of boilerplate, the book offers a new analytical framework, one that takes into account the nature of the rights affected, the quality of the recipient's consent, and the extent of the use of these terms. It goes on to offer possibilities for new methods of boilerplate evaluation and control, and concludes by discussing positive steps that NGOs, legislators, regulators, courts, and scholars could take to bring about better practices.

Management and engineering solutions to improve processing stock quality and reduce resource-intensity of mining

2018 ◽  
pp. 56-68
Author(s):  
V. V. Agafonov ◽  
V. Yu. Zalyadinov ◽  
M. E. Yusupov ◽  
N. S. Bikteeva
Keyword(s):  
Development Strategy ◽  
Open Pit ◽  
Mining Operations ◽  
High Concern ◽  
General Production ◽  
Resource Intensity ◽  
Product Output ◽  
And Control ◽  
A Company

Sustainability of mining companies is of of high concern. The problem is specifically acute at companies that are monotownor monosettlement-forming. Sustainability of a mine depends in many ways on product quality and production resource-intensity. This article discusses formation of mineral quality indexes in terms of an open pit chrysotile mine. The studies took into account specific features of operation procedures implemented by each structural division of the mine. The analysis has found managerial and technological inconsistencies which affect quality and marketable product output, as well as efficiency of the mine in whole. The background for efficiency enhancement at a company is, by the authors’ opinion, consolidation of personnel subject to the single development strategy, namely: improvement of production and control efficiency, as well as use of available reserves and resources by means of better setup for production. The proposed approaches to planning mining operations and forming mineral quality allow higher quality of processing stock. In addition, a new model proposed for interaction between structural divisions of a mining company ensures improvement of general production indexes.

EFFICIENT MANAGEMENT SYSTEM OF TEACHING TECHNICAL MEANS AT CENTRAL KINDERGARTEN PEDAGOGY COLLEGE IN INDUSTRIAL REVOLUTION 4.0

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Vũ Xuân Hùng
Keyword(s):  
Intellectual Development ◽  
Industrial Revolution ◽  
Current Period ◽  
Efficient Management ◽  
Urgent Task ◽  
Creative Learning ◽  
Cognitive Activities ◽  
And Control ◽  
Technical Teaching

In the process of teaching, technical teaching facilities are both a content and a means of conveying information, they help the lecturer organize and control the students' cognitive activities, in addition, they also help students be interested in learning, practice practical skills from which to form active and creative learning methods. Teaching technology is one of the necessary conditions to help teachers carry out their related work of educating, teaching and bringing up, and intellectual development, arouse the inherent intelligence qualities of students. Currently, the management of technical teaching facilities at the Central Kindergartens College has been carried out on a regular basis and achieved certain results, but in fact, there are still many inadequacies. Finding a number of limitations in the management of teaching technical facilities, thereby proposing solutions to overcome those limitations, improve the efficiency of investment, preservation and use of teaching technical facilities in the trend of Industry Revolution 4.0, improving the quality of teaching at Central Kindergarten Pedagogy colleges in the current period is a very important and urgent task.

The Implementation of Learning Materials Based on Local Wisdom of Agricultural in Binjai to Improve the Students Problem Solving Abilities

2019 ◽  
Author(s):  
Nur Tsalits Fahman Mughni
Keyword(s):  
Problem Solving ◽  
Control Group ◽  
School Grade ◽  
Teaching Materials ◽  
Quasi Experimental ◽  
Equivalent Control ◽  
The Subject ◽  
And Control ◽  
Experimental Group

Teaching materials by integrating local culture makes easier for students to understand the subject matter in the learning process. The aims of the study is to measure the effectiveness of teaching materials based on local wisdom of agriculture in Binjai in improving the students problem solving abilities. The research method was a quasi experimental which use non equivalent control group in the pretest posttest design. The sample of study were students of Senior High School grade X in Binjai that consisted of experiment group which used teaching materials based on local wisdom of agriculture in Binjai and control group that used student handbooks. Teaching materials are tested by material experts and technology experts to ensure the quality of teaching materials. Data collection was conducted through test. The results showed that the teaching materials based on local wisdom of agriculture in Binjai effective in improving students problem solving abilities in the experimental group students based on the results of N gain value was 0.67 which has medium criteria. It means teaching materials based on agricultural local wisdom of agriculture in Binjai can be used as one of the teaching materials in learning activities.

La Formación Continua y el Desarrollo de Competencias en los Docentes en Ejercicio del Nivel Secundario

2017 ◽  
Vol 1 (2) ◽  
Author(s):  
Leonor Alexandra Rodríguez Álava
Keyword(s):  
Teaching Practice ◽  
Training And Development ◽  
Middle Level ◽  
Teaching Skills ◽  
Practicing Teachers ◽  
Active Subject ◽  
Continuous Preparation ◽  
Analysis And Synthesis ◽  
The Ideal

Este artículo está encaminado a caracterizar el proceso de formación continua del docente del nivel medio en ejercicio asociado a la formación y desarrollo de sus competencias docentes, para lo que fueron utilizados métodos como   el análisis y síntesis, inducción y deducción, abstracción y concreción, la entrevista, la encuesta y  el cuestionario, donde a partir de sus resultados se  llega a la consideración de que la formación continua es la vía idónea para la formación y desarrollo de competencias docentes en los profesores en ejercicio, donde se debe asumir un modelo que propicie la reflexión sobre la propia práctica del docente, un clima de colaboración   y el profesor como sujeto activo de ese proceso.   Palabras claves: calidad educativa,   competencias docentes,   educador, estudio, preparación continua,  ABSTRACT   This article aims to characterize the process of education for teachers of middle level associated with exercise training and development of their teaching skills, for which methods were used as analysis and synthesis, induction and deduction, abstraction and concreteness, interview and questionnaire survey, where from their results leads to the consideration that the training is the ideal way for the formation and development of teaching skills in practicing teachers, where they must assume a model that encourages reflection on own teaching practice, a climate of collaboration and the teacher as an active subject of that process Keywords: quality of education, teaching skills, teacher, study, continuous preparation

Obesity management through Ayurveda - A Case Study

2017 ◽  
Vol 2 (4) ◽  
Author(s):  
Dheeraj Kumar Tyagi ◽  
Shivakumar .
Keyword(s):  
Clinical Findings ◽  
Dietary Habit ◽  
Unhealthy Lifestyle ◽  
Lifestyle Management ◽  
Before And After ◽  
Effect Of Treatment ◽  
And Control

Lifestyle disorders are one of the biggest threats for the population living unhealthy lifestyle. Sthoulya (Obesity) is one such disorder which creates lot of physical as well as mental disorder to the sufferer. Due to changing lifestyle, comforts and dietary habit lots of individuals changed their life totally. Obesity is a growing disease in developed and developing countries. Prevalence is drastically hike in past few years. Ayurveda, the science of life with which we can manage and control lots of lifestyle disorders. Focusing on dietary and lifestyle management along with treatment, we can overcome the hazards of obesity which is growing in a uncontrolled manner. The available data is based on the clinical findings only. Aim and objective: To assess the effect of “Guru Cha Atarpanam Chikitsa” in the management of Sthoulya. Setting: Swastharakshana evam Yoga, OPD and IPD, SDMCAH, Hassan. Method: Udwarthana, Parisheka, Shamana Aushadhis, Ahara, and Vihara was followed within the treatment duration and effect of treatment was assessed before and after treatment, advised for follow up. Results: The treatment adopted is effective in the management of Sthoulya and to improve the quality of life.

The effect of positive thinking training on the quality of life of parents of adolescent with thalassemia

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Adeleh Sadeghloo ◽  
Parna Shamsaee ◽  
Elham Hesari ◽  
Golbanhar Akhondzadeh ◽  
Hamid Hojjati
Keyword(s):  
Quality Of Life ◽  
Emotional Health ◽  
Intervention Group ◽  
T Test ◽  
World Health ◽  
Positive Thinking ◽  
Significant Difference ◽  
And Control ◽  
Paired T Test

Abstract Introduction Thalassemia, as the most common chronic hereditary blood disorder in humans, can impose many adverse effects on parents and their affected children. On the other hand, positive thinking is the method or the result of a positive focus on a constructive issue, so by teaching positive thinking, we can improve physical and social function, and promote emotional health and overall quality of life. The aim of this study was to determine the effect of positive thinking training on the quality of life of parents of adolescents with thalassemia. Methods This quasi-experimental study was performed on 52 parents of adolescents with thalassemia who attended Taleghani Hospital in Golestan province, Iran in 2017. Samples were randomly assigned into two groups of intervention and control. The positive thinking training (based on the theory of Martin Seligman) was carried out in the intervention group in 10 (45–60 min) sessions over a 5-week period. Data collection tools in this study were the World Health Organization (WHO) quality of life questionnaire (WHOQOL-BREF) and a demographic information questionnaire. Data were analyzed by SPSS-16 software using independent t-test, the paired t-test and a covariance test. Results The results of paired t-test showed a significant difference in the score of quality of life in intervention group before and after the intervention (p < 0.001). However, this test did not show any significant difference in the control group (p = 0.11). The covariance test, after removing the pre-test score, showed a significant difference between the intervention and control groups in terms of the score of quality of life, so that 13% of the changes after the intervention were due to the intervention (p = 0.009, η = 0.13). Conclusion The positive thinking training increased the quality of life of parents of adolescents with thalassemia. Therefore, using this program can be an effective way of improving the quality of life of parents. Thus, positive thinking training is suggested to be used as an effective strategy for increasing the quality of life of parents with ill children.

Sign in / Sign up

Export Citation Format

Share Document