Principles of juice purification

2021 ◽  
pp. 625-633
Author(s):  
Jan Maarten de Bruijn
Keyword(s):  
Carbon Dioxide ◽  
Calcium Carbonate ◽  
Sugar Beet ◽  
Calcium Ions ◽  
Cost Effective ◽  
White Crystal ◽  
Lime Kiln ◽  
Juice Extraction ◽  
Filter Aid

The raw juice as obtained by juice extraction of sugar beet cossettes contains dissolved and insoluble impurities (nonsugars) which need to be removed as much as possible to enable a cost-effective production of the wanted quality of white crystal sugar. The most commonly used purification approach of beet raw juice is the so-called classical liming process. The aim and principles of the different successive process steps in juice purification will be outlined in this paper. The purification principles comprise several chemical-physical reactions of particular nonsugars in the juice which are initiated at first by the addition of milk of lime to the raw juice in preliming and main liming. Through injection of the carbon dioxide produced in the lime kiln in the 1st carbonatation calcium ions precipitate as calcium carbonate, which is then used as filter aid to remove by sedimentation and/or filtration the formed slurry. The remaining surplus of lime salts are finally removed in the 2nd carbonatation which after filtration results in a clear thin juice.

scholarly journals Quality of technological limestone quality as an important aspect of the efficiency of sugar beet factories

2021 ◽  
Vol 845 (1) ◽  
pp. 012107
Author(s):  
M I Egorova ◽  
L N Puzanova ◽  
E S Nikolaeva
Keyword(s):  
Calcium Carbonate ◽  
Sugar Beet ◽  
Russian Federation ◽  
Federal District ◽  
Operating Efficiency ◽  
Sugar Production ◽  
Central Federal District ◽  
Beet Sugar ◽  
The Russian Federation

Abstract The authors studied 252 samples of limestone mined in 2014-2020 on the territory of 5 fields located in 2 regions of the Central Federal District of the Russian Federation. Limestone quality was assessed by the content of calcium carbonate and associated impurities. According to the results of the assessment, a number of deposits were formed in decreasing limestone quality. The highest quality was noted at the East-Bernikovskoe deposit (Tula region), containing on average 95.3% of calcium carbonate. Through the example of 10 beet sugar factories located in 5 regions of the Central Federal District, the influence of the quality of limestone on its consumption in sugar production was assessed. The authors studied the data on the consumption of limestone of the considered deposits at sugar beet factories, which was used in the period from 2014 to 2020. According to the results, a number of deposits were determined to increase the consumption of limestone in the production of sugar, which coincided with a number in terms of decreasing quality. A lower consumption of limestone was noted at beet sugar factories that used limestone from the East-Bernikovskoe (in average 3.81% during the studied period). Therefore, the choice of limestone of a certain deposit for the use in sugar production is a factor in enhancement of operating efficiency of beet sugar factories.

Influence of mineral elements on the yield and quality of grain of the prospective line in winter tritikale

2020 ◽  
Author(s):  
I.N. Voronchikhina ◽  
◽  
A.G. Marenkova ◽  
V. S. Rubets ◽  
V. V. Pylnev
Keyword(s):  
Cost Effective ◽  
Mineral Elements ◽  
Early Spring ◽  
High Potential ◽  
Winter Triticale ◽  
Yield And Quality ◽  
Fertilizer System

The results of elements development of varietal agrotechnics of a new high-potential line 238h of winter triticale presented. It was identified that under the conditions of 2020 the most cost effective fertilizer system is an early spring application of NPK (S) (15-15-15 (10)) at a dose of 200kg/ha. The profitability level of this fertilizer was 88,9%.

Regulatory Issues in Pakistan Telecommunication

1998 ◽  
Vol 37 (4II) ◽  
pp. 873-882 ◽  
Author(s):  
Sarfaraz Khan Quershi
Keyword(s):  
National Economy ◽  
Cost Effective ◽  
Market Forces ◽  
Global Trends ◽  
Regulatory Issues ◽  
Competitive Price ◽  
Modern Services ◽  
A Company ◽  
Telecom Infrastructure

Growth in telecom infrastructure and provision of modern telecom services to consumers at a cost based tariff helps growth of national economy. Modern telecoms serve as the engine of growth of national economy. Following the global trends of liberalisation and deregulation in telecoms monopolies which have thus far been providing inefficient communication at a greedily high tariffs are falling apart. Mergers in telecoms are not for increasing the size of the monopoly but to provide more efficient and cost effective services to the consumers. In Pakistan the erstwhile T&T department played a needful role at its time. Conversion of the department into a corporation and then into a company were steps necessary for following the global trends. Need now is to continue this trend further, eliminate the monopolistic approach by allowing more players in the field thus permitting the market forces to decide the provision of better quality of modern services at competitive price.

EFFECTIVENESS OF DOSING APPLICATION OF BENATAL GROUP HERBICIDES IN SUGAR BEET SOWING

1970 ◽  
pp. 49-51
Author(s):  
V. Z. Venevtsev ◽  
М. N. Zakharova ◽  
L. V. Rozhkova
Keyword(s):  
Sugar Beet ◽  
Agricultural Research ◽  
Humus Content ◽  
Crop Protection ◽  
Experimental Plot ◽  
Agricultural Research Institute ◽  
Row Crops ◽  
Sugar Beet Variety ◽  
Sowing Machine

Ryazan region annually receives stable yields of sugar beet roots 40 t/ha. Further growth of yields depends on balanced nutrition of plants cultivated hybrids, from the quality of the soil and of the phytosanitary State of sowing culture. Weed vegetation in wider spaced row crops of sugar beet in the initial periods of vegetation is high competition culture. The article presents the results of three studies on the effectiveness of the herbicide betanalnoj group, used to reduce contamination of sowing culture annual dicotyledonous weeds and increase the harvest of sugar beet roots. Studies conducted on experimental fields ISSA-branch FGBNU FNAC WIM (former AGRICULTURAL RESEARCH INSTITUTE in Ryazan). Soil: dark grey forest tjazhelosuglinistaja, humus content 4.0%, potassium and phosphorus-high pH is 5.8. Area of cultivated plots 50 m2, repetition, four sugar beet variety-Ocean. The predecessor-winter wheat. Under the autumn ploughing had made NPK120 under presowing cultivation-N60, SEV conducted seeder sowing machine. For crop protection herbicides were tested annually of sugar beet Betanal progress, UF-1.0 l/HA, Forte di Belvedere-1.0 l/HA, Betanal Max Pro-1.5 l/HA, Bajrang engineering works Super-1.5 l/HA, once applied to weeds. The harvest of sugar beet roots, take into account the square 10 m2 in 4-times repeated with each experimental plot by weighing machinery, processed data by ANOVA. The research found that studied herbicides efficiently at 87-92%, reduced infestation annual dicotyledonous weeds and increase the harvest of sugar beet roots to 29.9-44.1%

A Sample Preparation on Decapsulation Methodology for Effective Failure Analysis on Thin Small Leadless (TSLP) Flip Chip Package with Copper Pillar (CuP) Bump Interconnect Technology

2014 ◽  
Author(s):  
Gwee Hoon Yen ◽  
Ng Kiong Kay
Keyword(s):  
Sample Preparation ◽  
Failure Analysis ◽  
Flip Chip ◽  
Fault Localization ◽  
Cost Effective ◽  
Fault Isolation ◽  
Voltage Contrast ◽  
Interconnect Technology

Abstract Today, failure analysis involving flip chip [1] with copper pillar bump packaging technologies would be the major challenges faced by analysts. Most often, handling on the chips after destructive chemical decapsulation is extremely critical as there are several failure analysis steps to be continued such as chip level fault localization, chip micro probing for fault isolation, parallel lapping [2, 3, 4] and passive voltage contrast. Therefore, quality of sample preparation is critical. This paper discussed and demonstrated a quick, reliable and cost effective methodology to decapsulate the thin small leadless (TSLP) flip chip package with copper pillar (CuP) bump interconnect technology.

Sugar beet from field clamps -harvest quality and storage loss

2018 ◽  
pp. 639-647 ◽  
Author(s):  
Christa Hoffmann
Keyword(s):  
Sugar Beet ◽  
Surface Damage ◽  
Invert Sugar ◽  
Root Tip ◽  
Soil Conditions ◽  
Storage Losses ◽  
Commercial Sugar ◽  
And Storage ◽  
High Storage

Harvest quality of sugar beet varies according to soil conditions, harvester type and setting, and variety, too. Harvest quality may affect storage losses, in particular when injuries occur. To determine the harvest quality of commercial sugar beet and to quantify resulting storage losses, 92 commercial sugar beet clamps were sampled across Germany and information about harvest conditions were gathered. At IfZ, soil tare, leaf residues, topping diameter, root tip breakage and surface damage of the beets were determined. The beets were stored in 6 replicates in a climate container at 9°C for 10 weeks. The results demonstrate a rather good harvesting quality of sugar beet in Germany. Soil moisture at harvest did not affect harvest quality and storage losses. Very light, but also heavier soils lead to inferior harvest quality (soil tare, root tip breakage, damage) and slightly higher storage losses compared to the typical loam soils. Significant differences occurred between the three harvester types (companies). In general, high root tip breakage and severe surface damage of the beet was related to a high infestation with mould and rots, high invert sugar contents after storage and high sugar losses. Out of the five most planted varieties, in particular one turned out to be very susceptible to damage, resulting in high storage losses. The factor analysis suggests that the effect of harvester / harvester setting and of variety is more important for harvest quality and storage losses of sugar beet than soil conditions at harvest. Therefore, attention should be paid to optimize these conditions.

Nitrification and Autotrophic Denitrification in Calcium Alginate Beads

1987 ◽  
Vol 19 (1-2) ◽  
pp. 175-182 ◽  
Author(s):  
Z. Lewandowski ◽  
R. Bakke ◽  
W. G. Characklis
Keyword(s):  
Calcium Carbonate ◽  
Calcium Ions ◽  
Continuous Flow ◽  
Calcium Alginate ◽  
Microbial Respiration ◽  
Flow System ◽  
Alginate Beads ◽  
Alginate Gel ◽  
Gel Beads ◽  
Calcium Alginate Gel

Immobilization of nitrifiers and autotrophic denitrifiers (Thiobacillus denitrificans) within calcium alginate gel was demonstrated. Calcium carbonate reagent was immobilized along with bacteria as the stabilizing agent. Protons released as a result of microbial respiration reacted with calcium carbonate producing calcium ions which internally stabilized the calcium alginate gel. The microbially active gel beads were mechanically stable and active for three months in a continuous flow system without addition of calcium.

Quality Improvement of the DNA extracted by boiling method in Gram negative bacteria

2017 ◽  
Vol 6 (04) ◽  
pp. 5347 ◽  
Author(s):  
Omar B. Ahmed* ◽  
Anas S. Dablool
Keyword(s):  
Dna Extraction ◽  
Control Method ◽  
Extraction Procedure ◽  
Cost Effective ◽  
High Yield ◽  
Gram Negative Bacteria ◽  
Bacterial Dna ◽  
Gram Negative ◽  
E Coli

Several methods of Deoxyribonucleic acid (DNA) extraction have been applied to extract bacterial DNA. The amount and the quality of the DNA obtained for each one of those methods are variable. The study aimed to evaluate bacterial DNA extraction using conventional boiling method followed by alcohol precipitation. DNA extraction from Gram negative bacilli was extracted and precipitated using boiling method with further precipitation by ethanol. The extraction procedure performed using the boiling method resulted in high DNA yields for both E. coli and K. pneumoniae bacteria in (199.7 and 285.7μg/ml, respectively) which was close to control method (229.3 and 440.3μg/ml). It was concluded that after alcohol precipitation boiling procedure was easy, cost-effective, and applicable for high-yield quality of DNA in Gram-negative bacteria.

Sign in / Sign up

Export Citation Format

Share Document