scholarly journals The Difference of Composite Resin Compressive Strength with Sidikalang Coffee Soaking

2021 ◽  
Vol 2 (3) ◽  
pp. 141-146
Author(s):  
Mangatas H.P. Hutagalung ◽  
Benarivo T Ginting ◽  
Sucy Erawati ◽  
Sri Yasa Hasibuan ◽  
Cindy Amalia P
Keyword(s):  
Compressive Strength ◽  
Sample Size ◽  
Composite Resin ◽  
Filling Material ◽  
Anova Test ◽  
Treatment Groups ◽  
Three Point Bending ◽  
Significant Difference ◽  
The Difference ◽  
Average Compressive Strength

Composite resin is a caries filling material. Generally, dentists choose this type ofresin as a restoration material because this material has a high compressivestrength. There are several factors that influence the compressive strength ofcomposite resins, including beverages consumed such as coffee. This study aims todetermine the difference in the compressive strength of the composite resin withSidikalang coffee immersion in 9 hours, 27 hours and 54 hours immersion time.This type of research is experimental laboratories with posttest only control groupdesign. The research sample was composite resin measuring 8 mm in diameter and4 mm in height. The sample size is determined by the Federer formula and a totalsample of 24 was obtained for the four treatment groups. Measurement ofcompressive strength using a three-point bending tool on a universal testingmachine. Data were analyzed by using the oneway Anova test. Based on the resultsof the study, the average compressive strength of composite resin in the groupwithout immersion, 9 hours, 27 hours and 54 hours of immersion was 20.69 ± 0.84,18.94 ± 0.41, 14.36 ± 0.66 and 6.70 ± 0.48. From the results of the study it can beconcluded that the ads are a significant difference in the average compressivestrength of composite resin after immersion in Sidikalang coffee for 9 hours, 27hours and 54 hours.

Pengaruh Jumlah Pencucian Beras dengan Kadar Klorin

2017 ◽  
Vol 1 (1) ◽  
pp. 89
Author(s):  
Indah Purwaningsih ◽  
Supriyanto Supriyanto
Keyword(s):  
Mucous Membrane ◽  
Confidence Level ◽  
Iodometric Titration ◽  
Titration Method ◽  
Anova Test ◽  
Average Value ◽  
Significant Difference ◽  
The Difference

Abstract: Chlorine is a green halogen-shaped halogen gas at normal temperature and serves as bleach, stain remover and disinfectant. Chlorine is now widely used for bleaching rice so that less quality rice looks like quality rice. Chlorine is very toxic and causes mucous membrane irritation, highly reactive and very powerful oxidizer. The purpose of this research was to determine the difference of chlorine level in chlorinated rice washed once, twice and 3 times. The sample in this study amounted to 11 samples calculated by replication formula. Each sample was treated 3 times, ie 1 washed once, 2 washed twice and washed 3 times. The samples then examined by iodometric titration method. Based on the results of the study using ANOVA test, 11 samples obtained the average value of chlorine after washed once amount of 0.0176%, after washed twice amount of 0.0111%, and after washed 3 times amount of 0.0052% with the value significance p = 0.03 (p <0.05) at 95% confidence level which means there was a significant difference between chlorine levels in chlorinated rice washed once, twice and 3 times.Abstrak: Klorin merupakan unsur halogen berbentuk gas berwarna kuning kehijauan pada suhu normal danberfungsi sebagai pemutih, penghilang noda maupun desinfektan. Klorin sekarang banyak digunakan untuk bahan pemutih beras agar beras yang kurang berkualitas tampak seperti beras berkualitas. Klorin sangat toksik dan menyebabkan iritasi membran mukosa, sangat reaktif dan merupakan oksidator yang sangat kuat. Tujuan dari penelitian ini ialah untuk mengetahui perbedaan kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali. Sampel dalam penelitian ini berjumlah 11 sampel yang dihitung dengan rumus replikasi. Setiap sampel diberi perlakuan sebanyak 3 kali, yaitu 1 kali pencucian, 2 kali pencucian dan 3 kali pencucian. Sampel penelitian kemudian diperiksa dengan metode titrasi iodometri. Berdasarkan hasil penelitian menggunakan uji Anova secara komputerisasi terhadap 11 sampel diperoleh nilai rata-rata kadar klorin setelah 1 kali pencucian sebesar 0,0176 %, setelah 2 kali pencucian sebesar 0,0111 %, dan setelah 3 kali pencucian sebesar 0,0052 % dengan nilai signifkansi p = 0,03 (p<0,05) pada tingkat kepercayaan 95% yang artinya ada perbedaan yang bermakna antara kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali.

scholarly journals Influence of Apical Patency and Cleaning of the Apical Foramen on Periapical Extrusion in Retreatment

2013 ◽  
Vol 24 (5) ◽  
pp. 482-486 ◽  
Author(s):  
Marili Doro Andrade Deonizio ◽  
Gilson Blitzkow Sydney ◽  
Antonio Batista ◽  
Roberto Pontarolo ◽  
Paulo Ricardo Bittencourt Guimarães ◽  
...  
Keyword(s):  
Material Removal ◽  
Filling Material ◽  
Mean Values ◽  
Filtration System ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Before And After ◽  
The Mean ◽  
The Difference ◽  
Removal Technique

This study evaluated the influence of apical patency, root filling removal technique and cleaning of the apical foramen, concerning the amount of debris extruded during root canal retreatment. Forty mandibular incisors were randomly assigned to 4 groups - GIM (n=10), GIIM (n=10), GIPT (n=10) and GIIPT (n=10), which were named according to leaving (I) or not (II) apical patency during canal preparation and filling removal technique (manual - M or ProTaper system - PT). After filling material removal, each specimen of each group had the apical foramen cleaned by sizes 15, 20 and 25 instruments, generating 12 subgroups: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 and GIIPT25. Extruded filling debris was collected by a Milipore filtration system, an HV-durapore, 0.45 µm pore filter with a 25 mm diameter. The filters were weighed before and after the collection on an analytical scale (10–5 g), and the difference was calculated. The mean weight of extruded filling debris was analyzed statistically by Kruskal-Wallis and Friedman ANOVA tests (α=0.05). The mean values found in the groups (in mg) were: GIM (0.95±0.94), GIIM (0.47±0.62), GIPT (0.30±0.31) and GIIPT (0.32±0.44). There was no statistically significant difference among any of the groups or subgroups (p>0.05). ProTaper provided the smallest amount of extruded filling material, regardless of presence or absence of apical patency, followed by manual technique, without and with apical patency. Additional amounts of debris were collected during cleaning of the apical foramen, regardless of the instrument, presence/absence of patency or root filling removal technique.

scholarly journals The Effect of Aloe Vera Extract to Extensive Lesion and Expression of Transforming Growth Factor (TGF-β) on Alkaline Chemical Trauma Cornea Model

2018 ◽  
Vol 1 (2) ◽  
pp. 1-17
Author(s):  
Fahcreza ◽  
Elsa Iskandar ◽  
Rachmat Hidayat ◽  
Petty Purwanita ◽  
Anang Tribowo ◽  
...  
Keyword(s):  
Wound Healing ◽  
Growth Factor ◽  
Wistar Rats ◽  
Aloe Vera ◽  
Control Group ◽  
Treatment Groups ◽  
White Rats ◽  
Significant Difference ◽  
The Difference ◽  
In Cells

Abstract Background: Chemical trauma to the cornea is an emergency condition of the eye that requires early diagnosis and good treatment. Alkaline have ability to saponify fatty acids in cells and cell membranes which can make penetration into the stroma and destroy proteoglycans and collagen in cells. Aloe vera (AV) contains several active substances that are reported to have anti-inflammatory, immunomodulatory, and wound healing effects. AV has been reported to accelerate the healing process of corneal epithelial defects by increasing fibroblast proliferation, collagen production and growth factor production. This study aims to determine the difference between the effect of aloe vera extract with a concentration of 10%, 20%, 40% and BSS on the healing of extensive corneal lesions in white wistar rats alkaline trauma models. Method: This study was an experimental study with a pre and posttest only with control group design in vivo approach to 30 Wistar white rats which were divided into 5 treatment groups for 3 days. Comparative analysis of effectiveness using the ANNOVA test or the Kruskal Wallis test and continued by the post hoc test. Results: Based on the one way ANOVA test there was a statistically significant difference in effectiveness between the five treatment groups on the percentage of corneal wound healing area and TGF-β expression with an assessment of p = 0,000 each. The administration of alloevera (AV) concentration of 20% had a significant difference in percentage of healing of corneal lesions and TGF-β expression compared with other treatment groups with p = 0,000 each. Large differences in the area of corneal lesions in the 40% AV group were -0.45 in the BBS group, 0.146 in the 10% AV group, 0.493 in the 20% AV group. The difference in the AV group 10% was 0.30 in the BBS group, -064 in the AV group 20%, and -0.14 in the AV group 40%. However, TGFβ expression in the normal control group that did not receive treatment was 54.94 (53.21-56-12). TGFβ levels in the BSS group were 10.44, the 10% aloe vera group was 25.43, 47.99 for the 20% aloe vera group and 37.95 for the 40% aloe vera group. Conclusion: There is a difference between the effect of aloe vera extract with concentrations of 10%, 20%, 40% and BSS on the extensive healing of corneal lesions in white wistar rats with alkaline chemical trauma models.

scholarly journals Healing Process Following Application of Set or Fresh Mineral Trioxide Aggregate as a Root-End Filling Material

2011 ◽  
Vol 05 (01) ◽  
pp. 019-023 ◽  
Author(s):  
Mehdi Habibi ◽  
Jamileh Ghoddusi ◽  
Ataollah Habibi ◽  
Nooshin Mohtasham
Keyword(s):  
Healing Process ◽  
Mineral Trioxide Aggregate ◽  
Histological Evaluation ◽  
Filling Material ◽  
Chi Square ◽  
Unsuccessful Attempt ◽  
Gutta Percha ◽  
Significant Difference ◽  
Chronic Abscess ◽  
The Difference

ABSTRACTObjectives: An unsuccessful attempt to reach the apical area or to place the retrograde material is a major difficulty in periradicular surgery. The aim of this study was to compare the histological evaluation of the healing process following an orthograde versus a retrograde application of mineral trioxide aggregate (MTA) as a root-end filling material during apical surgery on cats’ teeth in order to find out whether orthograde placement of MTA before surgery can be used instead of retrograde placement during surgery. Methods: In this experimental study, 24 canine teeth in 12 mature and healthy cats were filled with either MTA or gutta-percha in an orthograde manner. Two weeks later, the teeth with MTA were surgically exposed and resected to the set-MTA within the canals. The teeth previously filled by gutta-percha were also surgically exposed, and retrograde cavities were prepared at the root ends and filled with fresh-MTA. After 8 weeks, the animals were euthanized by vital perfusion. Six-micron histological slices were prepared from samples, stained by Hematoxylin & Eosin, and histologically studied by means of a light microscope. The collected data was analyzed by the Chi-square and the T-test. Results: One of the samples in the fresh-MTA group was omitted during processing because of inappropriate sectioning. In the set-MTA group, 5 out of 12 showed chronic abscess, while in the fresh-MTA group, 2 out of 11 were discovered to have chronic abscess; however, no significant difference was observed (P>.05). Hard tissue healing (cementum, bone, cementum + bone formation) in the set-MTA and fresh-MTA groups were 7 out of 12 and 9 out of 11, respectively. While healing seemed more likely to occur in the fresh-MTA group, the difference was statistically insignificant (P>.05). The magnitude of bone, cementum, or bone and cementum formation showed slight differences between the two groups; however, the figures failed to show any marked differences (P>.05). Conclusions: Orthograde placement of MTA could be used as an obturation material before surgery. In this way, after root-end resection, there would be no need for root-end preparation and filling procedures. (Eur J Dent 2011;5:19-23)

scholarly journals Randomised Control Trial Comparing Cypermethrin-Based Preparations in the Prevention of Infectious Bovine Keratoconjunctivitis in Cattle

Animals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 184
Author(s):  
Jennifer Allan ◽  
Steven Van Winden
Keyword(s):  
Live Weight ◽  
Positive Control ◽  
Randomised Control Trial ◽  
Treatment Groups ◽  
Infectious Bovine Keratoconjunctivitis ◽  
Moraxella Bovis ◽  
Significant Difference ◽  
Case Status ◽  
The Difference ◽  
Control Study

Infectious bovine keratoconjunctivitis (IBK) caused by Moraxella bovis is commonly seen in the summer months spread by face flies. This trial investigated the difference in incidence of IBK cases from natural exposure between two groups of animals, one treated with Cypermethrin pour-on preparation (PON, n = 98) and one with Cypermethrin impregnated ear tags (TAG, n = 99). Daily Live Weight Gain (DLWG) difference was investigated between animals with cases and those without and between treatment groups. A randomised positive control study, enrolled 197 animals split into two treatment groups. Cases of IBK and DLWG were recorded over the grazing season (April–November 2018). Fifty-four cases of IBK were recorded. There was no association between the two treatment groups (p = 0.362) and case status. Breed and under 12 months old were significant factors for having a case; (OR 2.3, p = 0.014 and OR 3.5, p < 0.001 respectively). There was no difference in DLWG between animals that had a case and animals that had not (p = 0.739) or between the two treatment groups (p = 0.215). Based on our results, there is no significant difference between PON or TAG preparations in the prevention of IBK. Younger animals and white-faced breeds are significantly more likely to suffer with IBK.

scholarly journals THE DIFFERENCE ON COMPRESSIVE STRENGTH AND DIMENSIONAL CHANGE OF COMMERCIALLY TYPE III GYPSUM COMPARED TO RECYCLE GYPSUM TYPE III TO PRODUCE WORKING CAST

2016 ◽  
Vol 19 (2) ◽  
pp. 121-127
Author(s):  
Siti Wahyuni ◽  
Haslinda Z Tamin ◽  
Harry Agusnar
Keyword(s):  
Compressive Strength ◽  
Laboratory Experiment ◽  
Manufacturing Process ◽  
Calcium Sulfate ◽  
Dimensional Change ◽  
Type Iii ◽  
Significant Difference ◽  
The Difference ◽  
Recycled Gypsum ◽  
One Way Anova

Gypsum is derived from pure calcium sulfate dehydrate which is a common material that is commonly used in denture manufacturing process. This study aimed to know the difference on compressive strength and dimensional change of commercially type III gypsum compared to recycle type III gypsum to produce working cast. The type of research is laboratory experiment. A total of 40 samples for each test is divided into five groups which consists of commercial type III gypsum,  pure recycled type III gypsum, pure recycled type III gypsum with 10%, 20%, 30% type III commercial gypsum. The difference on compressive strength and dimensional change between the groups was analyzed using one way ANOVA and is them tested with LSD test. The result showed that there was a significant difference (p<0,05) between compressive strength and dimensional change of commercial type III gypsum compared to pure recycled type III gypsum and pure recycled type III gypsum with 10%, 20% and 30% type III commercial gypsum. In conclusion, addition of 30% commercial gypsum in recycled gypsum the compressive strength was higher than other recycled gypsum types.  

scholarly journals Efektivitas Ekstrak Biji Srikaya (Annona squamosa L.) sebagai Bahan Pembersih Gigi Tiruan terhadap Daya Hambat Pertumbuhan Streptococcus mutans pada Basis Akrilik Heat Cured

2020 ◽  
Vol 8 (1) ◽  
pp. 48
Author(s):  
Muchammad Fahmi Rizqi Abdillah ◽  
FX Ady Soesetijo ◽  
Dewi Kristiana
Keyword(s):  
Random Sampling ◽  
Acrylic Resin ◽  
Simple Random Sampling ◽  
Seed Extract ◽  
Annona Squamosa ◽  
Denture Base ◽  
Treatment Groups ◽  
Cleaning Agents ◽  
Significant Difference ◽  
The Difference

The rough surface of a heat cured acrylic resin as a denture base can cause a pathogenic buildup of plaques and biofilms, so an effort to clean the denture base is needed. The available denture cleaning chemicals are proof of some disadvantages, so it is necessary to do research on alternative natural ingredients. Srikaya seed extract using ethanol 96% solvent has been shown to have antibacterial activity and with its various properties, so that it has the potential to become denture cleaning agents. Samples were made based on ADA No.17 specifications with 5 samples in each of the 6 treatment groups, sampling using Simple Random Sampling. Samples contaminated with S. mutans were soaked in srikaya seed extract 25%, 50%, 75%, 100%, 0.5% NaOCl and sterile aquadest. There was a significant difference (p <0.05) in each treatment group. There is an influence of the difference in concentration of srikaya seed extract on the growth of S. mutans bacteria on a heat cured acrylic base. Keywords: heat cured acrylic resin, S.mutans, srikaya seed extract, absorbance

scholarly journals Pengaruh Perendaman Kopi Robusta dan Arabika terhadap Kekerasan Resin Komposit Nanofiller

e-GIGI ◽  
2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Fransiska M. Pardosi ◽  
Darmawati A. Indraswari ◽  
Lusiana Batubara ◽  
Nadia Hardini
Keyword(s):  
Composite Resin ◽  
Artificial Saliva ◽  
Control Group ◽  
Arabica Coffee ◽  
Treatment Groups ◽  
Hardness Tester ◽  
Robusta Coffee ◽  
Significant Difference ◽  
Post Hoc ◽  
One Way Anova

Abstract: Nanofiller composite resin has small filler size which enhances its properties. However, these properties could decrease due to several factors. Acidic liquid such as coffee could reduce the hardness of composite resin. This study was aimed to analyze the effect of robusta and arabica coffee immersion on the hardness of nanofiller composite resin. A total of 27 composite resin samples were used and then were polished by using a soflex disc for 30 seconds on each roughness level. Samples were then divided into three groups, as follows: the control group with artificial saliva and the treatment groups with robusta coffee and arabica coffee. The composite resin molds were immersed in the three groups for 5 days. After five days of immersion, the hardness of the sample was tested by using a Vickers hardness tester. Artificial saliva as the control group had the highest mean hardness value of 112.98±8.67 VHN, followed by robusta coffee, and then by arabica coffee. The One Way Anova and post hoc LSD test showed that there were significant differences in all groups (p<0.05) except for the two treatment groups, namely robusta and arabica coffee groups which did not show any significant difference in the resin hardness (p>0.05). In conclusion, robusta and arabica coffee affect the hardness of the nanofiller composite resin, but there is no significant difference in the hardness between the robusta and arabica coffee groups.Keywords: composite resin hardness, nanofiller, robusta coffee, arabica coffee Abstrak: Resin komposit nanofiller memiliki ukuran filler kecil yang dapat meningkatkan fungsinya namun fungsi tersebut dapat menurun oleh beberapa hal. Cairan asam yang dikonsumsi seperti kopi dapat menurunkan kekerasan resin komposit. Penelitian ini bertujuan untuk mengetahui pengaruh perendaman kopi robusta dan arabika terhadap kekerasan resin komposit nanofiller. Sampel resin komposit yang digunakan sebanyak 27 buah dan dilanjutkan dengan pemolesan menggunakan soflex disc selama 30 detik setiap tingkat kekasarannya. Sampel kemudian dibagi dalam tiga kelompok, yaitu kelompok kontrol dengan saliva buatan dan dua kelompok perlakuan dengan kopi robusta dan arabika. Sebanyak 27 buah resin komposit direndam ke dalam tiga kelompok tersebut selama lima hari kemudian diuji kekerasannya dengan vickers hardness tester. Saliva buatan sebagai kelompok kontrol memiliki nilai rerata kekerasan tertinggi sebesar 112,98±8,67 VHN, diikuti kopi robusta, dan nilai terendah yaitu kopi arabika. Hasil uji One Way Anova dan post hoc LSD menunjukkan terdapat perbedaan bermakna pada semua kelompok (p<0,05) kecuali pada kedua kelompok perlakuan yaitu antara kopi robusta dan arabika tidak menunjukkan adanya perbedaan kekerasan yang bermakna (p>0,05). Simpulan penelitian ini ialah kopi robusta dan arabika memengaruhi kekerasan resin komposit nanofiller namun tidak terdapat perbedaan kekerasan antara keduanya.Kata kunci: kekerasan resin komposit, nanofiller, kopi robusta, kopi arabika

scholarly journals COMPARATIVE STUDY OF FLIPPED AND SUPPLEMENTAL LEARNING CLASSROOM PROCESS AMONG ECONOMICS STUDENTS IN OSUN STATE

2021 ◽  
Vol 7 (04) ◽  
Author(s):  
Esther Opeyemi Olasupo ◽  
Adebayo Joseph Obadiora ◽  
Adeyinka Oluwaseun Kareem
Keyword(s):  
Experimental Study ◽  
Academic Performance ◽  
Comparative Study ◽  
Sample Size ◽  
Secondary Students ◽  
Significant Difference ◽  
Economics Students ◽  
Quasi Experimental ◽  
The Difference ◽  
African Setting

This quasi experimental study compared the effectiveness of flipped and supplemental classrooms in enhancing students’ academic performance in a traditional African setting. It also examined the difference in the effectiveness of flipped and supplemental classrooms in improving Economics students’ retention ability. The sample size was made up of three intact classes of secondary students in Senior School Two (SS 2) in Osun State, Nigeria. Two research hypotheses were formulated for the study. The collected data were analyzed using ANCOVA. The result revealed that there is no significant difference in the effectiveness of flipped and supplemental classrooms in enhancing students’ academic performance in the study area. The study also revealed that there was a significant difference in the use of flipped and supplemental classrooms in improving students’ retention ability. The study concluded that flipped and supplemental classrooms had no significant difference in their effectiveness.

scholarly journals Effects of filler volume of nanosisal in compressive strength of composite resin

2017 ◽  
Vol 50 (4) ◽  
pp. 183
Author(s):  
Dwi Aji Nugroho ◽  
W. Widjijono ◽  
N. Nuryono ◽  
Widya Asmara ◽  
Wijayanti Dwi Aastuti ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fossil Fuels ◽  
Composite Resin ◽  
Testing Machine ◽  
Natural Fibers ◽  
Composite Resins ◽  
Inorganic Filler ◽  
Filler Materials ◽  
Significant Difference ◽  
Volume Group

Background: One of the composite resin composition is inorganic filler. The production of inorganic filler materials was highly dependent on non-degradable, and nonrenewable fossil fuels. Therefore, natural fibers can be used as substitute for inorganic fillers. One that can be developed is sisal. Purpose: This study aimed to determine the effects of nanosisal filler volume on compressive strength of composite resin. Methods: In this study, composite resins with nano-sized sisal as filler were manufactured and labeled as nanosisal composites. This research processed sisal fibers into nano size and mixed them with Bis-GMA, UDMA, TEGDMA, Champhorquinone (Sigma Aldrich). Nanofiller composite (Z350 XT, 3M, ESPE) was utilized as a control. The 20 samples utilized were divided into 4 groups (each group containing five samples): Group A contained nanosisal composite of 60% filler volume, group B, nanosisal composite of 65% filler volume, group C, nanosisal composite of 70% filler volume and group D, nanofiller composite (Z350 XT, 3M, ESPE). Samples were 2 mm in diameter and 6 mm in height. The sample was tested for compressive strength using a universal testing machine (UTM). Data was analyzed by means of a Kruskal Wallis procedure. Results: The mean of the compressive strength of the nanosisal composite 60% was 16.80 MPa; the nanosisal composite 65% was 10.80 MPa, the nanosisal composite 70% was 7.20 MPa and the nanofiller composite was 7.40 MPa. There was a significant difference in data analysis (p = 0.033; p < 0.05). Conclusion: In this study, the filler volume of nanosisal influenced the compressive strength of a composite resin and the nanosisal filler volume was recomended at 60%.

Sign in / Sign up

Export Citation Format

Share Document