scholarly journals Features of the selection of raw materials for the production of ceramics by carriers of the Novosibirsk version of the Kulai culture

2021 ◽  
Vol 16 ◽  
pp. 149-154
Author(s):  
D. V. Selin ◽  
◽  
A. A. Maksimova ◽  
Keyword(s):  
Mineral Composition ◽  
Raw Materials ◽  
Raw Material ◽  
Petrographic Analysis ◽  
Natural Clays ◽  
The Difference ◽  
Selection Of

A technical and petrographic analysis of the ceramics of the novosibirsk version of the Kulay culture from the Kamenny Mys and Dubrovinsky Borok-3 sites has been carried out. It was found that the same type was used as a raw material at both sites — natural clays. It has been determined that, according to the mineral composition, different groups of clays are distinguished: three on Kamenny Mys, and two on Dubrovinsky Bork-3. The correlation between the groups of clays and the compositions of clay paste demonstrates that the difference is manifested not only in the skills of selecting clays by potters, but also in the skills of drawing up molding masses with different groups of clays. When comparing the clays from the two sites, it was determined that they differ significantly from each other in their mineral composition.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals PEMANFAATAN LIMBAH FLY ASH DARI PEMBAKARAN BATUBARA PADA PEMBUATAN SEMEN PCC (PORTLAND COMPOSITE CEMENT) DI PT SEMEN XYZ LAMPUNG

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Dwi Septiyana Sari ◽  
◽  
Susanti Sundari
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Raw Materials ◽  
Testing Machine ◽  
Technical Aspect ◽  
Raw Material ◽  
Physical Test ◽  
Composite Cement ◽  
The Difference ◽  
The Cost

Abstract This study discusses the use of fly ash waste from coal burning on the manufacture of PCC (Portland composite cement) at PT. XYZ Lampung. The purpose of this research is to look at the technical studies and the efficiency of raw materials in the use of fly ash in cement making, in this case PCC cement (Portland Composite Cement). The steps taken in analyzing the data in this study were viewed from a technical aspect by means of a physical test, namely the cement compressive strength test at the age of 3 days, 7 days, and 28 days using the Compression Testing Machine. This test was conducted to see the comparison of the compressive strength of PCC cement using limestone and fly ash as raw materials, then calculate the difference in raw material costs in the year before and after the replacement of limestone with fly ash. The results showed that cement with the addition of fly ash after 3 days, 7 days and 28 days had an increased compressive strength value, which increased 21.69%, 16.07% and 8.05% respectively of the compressive strength of cement using limestone. The use of fly ash as a substitute for limestone has an effect on the cost of raw materials, where the difference between the cost of raw materials in 2019 and the cost of raw materials in 2018 is Rp. 39,440,952,074.

scholarly journals Selection of Fish Raw Material Suppliers by Integrating ANP and Topsis Methods in CV. Riki Utama Mandiri

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Aula Fajar Iman Sakti ◽  
Wiwik Sulistiyowati
Keyword(s):  
Supplier Selection ◽  
Raw Materials ◽  
Rank Order ◽  
Raw Material ◽  
Network Process ◽  
The Common ◽  
Common Problems ◽  
Frozen Fish ◽  
A Company ◽  
Selection Of

CV. Riki Utama Mandiri is a company in distributing an economic fish frozen product. This company distributed any kind of retail and wholesaler, both domestic and export. They distributing many frozen fish products variant such as Patin Fillet and Shark Fin. The all raw materials of those frozen seafood was obtained by three different suppliers. The common problems found in CV. Riki Utama Mandiri mostly about raw patin fish supplier which often committed delivery delays.  The purpose of this research is to fixing the supply chain management in deciding the more accurate selections of raw materials supplier. To overcome the common problems that happen. Analytical network process (ANP) will simplify the criteria weight values and sub criteria of each supplier. Meanwhile, technique for others reference by similarity to ideal solution (TOPSIS) method is used for giving a rank order of the alternative supplier. This research is expected for being a consideration for the company in obtaining a good and more effective kind of raw supplier. We also expecting the company for tighten supplier selection more effective way so that it can fullfilled the existing standard. Also to overcome the common problems such as delivery delays, competing raw materials with uncertain quality, and difficulty in sort out the raw materials due to size issues.

scholarly journals Comparative anatomical and histological research of the roots of Rheum Palmatum L. And Rheum Officinale B.

2020 ◽  
Vol 19 (5-6) ◽  
pp. 155-159
Author(s):  
Ksenia N. Semenyuta ◽  
Anna A. Shmygareva ◽  
Anatoly N. Sankov
Keyword(s):  
Histological Analysis ◽  
Raw Materials ◽  
Raw Material ◽  
Histochemical Reaction ◽  
Closely Related Species ◽  
Histological Studies ◽  
Rheum Palmatum ◽  
Anthracene Derivatives ◽  
The Russian Federation ◽  
The Difference

Introduction. The aim of the study is to perform the anatomical and histological analysis of the roots of Rheum palmatum L. and Rheum officinale B., and also to check histochemical reactions for the presence of anthracene derivatives. Material and methods. The methodological basis of the anatomical and histological studies was the standard method for the preparation of micro-preparations of roots of Rheum palmatum L. and Rheum officinale B. described in the State Pharmacopoeia of the Russian Federation, XIV edition (OFS.1.5.3.003.15). Results and discussion. Anatomical and histological studies of Rheum palmatum L. and Rheum officinale B. raw materials confirmed the roots of Rheum palmatum L. to have classical secondary structure, while the roots of Rheum officinale B. have classical primary structure. The histochemical reaction to anthracene derivatives with 10% alkali solution was carried out, it resulted in cherry-red staining of core rays and some structures of cortical parenchyma of the fragment of Rheum palmatum L., while the roots of Rheum officinale B. failed to stain. Conclusions. The anatomical and histological studies of the rhizomes and roots of Rheum palmatum L. and Rheum officinale B. demonstrate the difference in the structure of closely related species of plants. It makes possible to identify the medicinal raw material of these plants.

scholarly journals RANCANG BANGUN SISTEM INFORMASI PERSEDIAAN BAHAN BAKU DAN ADMINISTRASI GUDANG MAJEMUK (STUDI KASUS KAROSERI PT. XYZ MALANG)

2017 ◽  
Vol 2 (2) ◽  
pp. 146-152
Author(s):  
Denny Lukianto Kumala ◽  
Soetam Rizky Wicaksono
Keyword(s):  
Manufacturing Process ◽  
Raw Materials ◽  
Influential Factor ◽  
Raw Material ◽  
Accounting System ◽  
Accurate Calculation ◽  
Counting System ◽  
Administration System ◽  
The Difference ◽  
Production Losses

In the manufacturing process Bus and Mini Bus, a lot of the raw materials required. Raw materials are stored at many warehouses (especially on Body PT. XYZ Malang). Materials / goods are highly vulnerable to lost or stolen. The most influential factor in it is the counting system inventory / materials and administration. These changes will have an impact on the process of goods more accurate calculation based on the demand of production. Losses will have a greater likelihood of being used if the system can not address the calculation of the goods/raw materials better.And administration system that can cope with the calculation of the goods/raw materials are better here is a system that can calculate expenditures for production based on the incoming bill alone, and can calculate the receipt of goods in accordance with the letter received by the supplier. The system can also provide reports based on existing transactions during a certain period.With the inventory system and the administration is then the difference between the goods that previously occurred can be minimized and raw material inventory accounting system can work better.

scholarly journals Preliminary Archaeopetrological Study of the Lithic Industry From the l’Hort de la Boquera Rock Shelter (Margalef de Montsant, Tarragona, Spain): Applying Mineralogical and Geochemical Techniques

2018 ◽  
Vol 56 ◽  
pp. 23-33
Author(s):  
Mar Rey-Solé ◽  
Maria Pilar García-Argüelles ◽  
Jordi Nadal ◽  
Xavier Mangado ◽  
Anders Scherstén ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Raw Materials ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Study Results ◽  
Lithic Industry ◽  
Plasma Mass Spectrometry

The l’Hort de la Boquera site is located in the northeastern part of Iberia and its stone tool assemblage includes up to 25,000 flint artefacts. This is the first approach to the analysis of the raw material through an archaeopetrological study. Results were obtained by use of mineralogi¬cal techniques: macroscopic and petrographic analysis, Scanning Electronic Microscopy (SEM), Micro-Raman and X-Ray diffraction (XRD); additionally, Laser Ablation Inductively Coupled Plasma Mass Spectrometry was applied. It has been possible to discriminate at least four flint categories, the ‘Evaporitic flint type’ (with two local subvarieties – ‘Common evaporitic’ and ‘Garnet’ varieties) that comes from local outcrops of the Ulldemolins Complex, and two flint types that had their origin further afield: the ‘Charophyta flint type’ (coming from the Torrente de Cinca Unit) and the ‘Dark flint type’ (from the La Serra Llarga Formation).These results make this study the most comprehensive analysis of raw materials that has been carried out in the area so far

scholarly journals PENGENDALIAN PERSEDIAAN BAHAN BAKU DALAM PROSES PRODUKSI DENGAN MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY (EOQ)

2019 ◽  
Vol 1 (2) ◽  
pp. 415-423
Author(s):  
Elia Rahayu R ◽  
Nor Norisanti ◽  
Acep Samsudin
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Economic Order Quantity ◽  
Economic Order ◽  
Order Quantity ◽  
Analysis Method ◽  
Inventory Cost ◽  
Total Inventory ◽  
The Difference ◽  
Quantitative Descriptive

The purpose of this study is to control the supply of raw materials using the Economic Order Quantity (EOQ) method in Tahu Nugraha Jaya Sukabumi UKM. The data analysis method used is quantitative descriptive to describe and describe the data to be examined and then processed using EOQ. This study uses the EOQ method to determine the total inventory cost. The data needed in this study are the number of purchases of raw materials, the amount of use of raw materials, storage costs, and ordering costs. The results of this study indicate that by applying the EOQ method can further optimize the supply of raw materials by minimizing raw materials with increased inventory. With the application of the Economic Order Quantity (EOQ) method it shows more efficient than conventional methods of the company. Conclusions, seen from the difference in the TIC of the two methods, the more efficient method is the Economic Order Quantity (EOQ) method that is equal to 244,392.94 while the calculation used by the company is 374,325. so that it can be obtained that there is a difference between the Company TIC and the EIC method TIC. Keywords: Raw Material Inventory, Production Process

scholarly journals Procurement and mobility during the Late Pleistocene: Characterising the stone-tool assemblage of the Picamoixons site (Tarragona, NE Iberian Peninsula)

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
María Soto
Keyword(s):  
Iberian Peninsula ◽  
Late Pleistocene ◽  
Raw Materials ◽  
Management Strategies ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
Hunter Gatherers ◽  
Definition Of ◽  
Ne Iberian Peninsula

The Picamoixons site is a rockshelter located in the province of Tarragona (NE Iberian Peninsula). It was object of two rescue campaigns during 1988 and 1993, which led to the recovery of a complete archaeological assemblage, including stone tools as well as faunal and portable art remains that date the occupation to the 14th to 11th millennium BP (calibrated). This study involves a petrographic characterisation of the stone-tool assemblage in order to establish: 1) the procurement areas, 2) the raw materials management strategies and 3) the mobility radius and territorial sizes of the hunter-gatherers groups that occupied the site. The method applied comprises in a multiscale analysis that includes systematic prospection, the petrographic characterisation of geological and archaeological samples, an analysis of the chert types represented in the knapping sequence, and the definition of the mobility axes and areas frequented according to lithic procurement.A petrographic analysis of the chert in the prospected area led to the definition of nine macroscopic varieties related to five types (Vilaplana, Morera, Maset, Vilella and Tossa cherts), related to Lower and Upper Muschelkalk (Triassic), Lutetian, Bartonian (Palaeocene) and Sannonian (Oligocene) deposits.The study of the knapping sequences indicates the main exploitation of Bartonian cherts (Tossa type), and the use of Lutetian cherts (Maset and Morera types) for configuring retouched tools. The exploitation of the remaining raw material types identified is considered sporadic and opportunistic.Defining the procurement areas enabled the mobility radius to be assessed as between 3 and 30 km, highlighting the importance of the fluvial basins as natural movement pathways. The results indicate that the main procurement territory was 16 km2 in area, associable with a forager radius. The most remote procurement distances suggest a maximum exploitation area of 260 km2, defining an intra-regional range. This range presents parallelisms with various contemporaneous hunter-gatherers groups in Western Europe, suggesting a progressive mobility reduction dynamic during the Late Pleistocene-Initial Holocene.

Ceramics

1998 ◽  
Author(s):  
Norman Herz ◽  
Ervan G. Garrison
Keyword(s):  
Physical Properties ◽  
Raw Materials ◽  
General Term ◽  
Raw Material ◽  
Petrographic Analysis ◽  
Ceramic Product ◽  
Primary Interest ◽  
Archaeological Ceramics ◽  
Ethnographic Studies ◽  
Insight Into

Archaeological ceramics refers to products made primarily of clay and containing variable amounts of lithic and other materials as well. The term ceramic is derived from the Greek keramos, which has been translated as "earthenware" or "burned stuff." Ceramics include products that have been fired, primarily pottery but also brick, tile, glass, plaster, and cement as well. Since pottery is by far the most important archaeologically, and the methods of sampling and study are largely applicable to the others, this chapter is devoted primarily to pottery. Pottery then is the general term used here for artifacts made entirely or largely of clay and hardened by heat. Today, a distinction is sometimes made between pottery, applied to lower-quality ceramic wares, and the higher-grade product porcelain. No such distinction will be made here, so the term pottery alone will be used. Raw material that goes into the making of a pot includes primarily clay, but also varying amounts of temper, which is added to make the material more manageable and to help preserve the worked shape of the pot during firing. Of primary interest in ceramic studies are 1. the nature and the source of the raw materials—clays, temper, and slip (applied surface pigment)—and a reconstruction of the working methods of ancient potters; 2. the physical properties of the raw materials, from their preparation as a clay-temper body through their transformations during manufacture into a final ceramic product; 3. the nature of the chemical and mineral reactions that take place during firing as a clue to the technology available to the potter; and 4. the uses, provenance, and trade of the wares produced. Much of the information needed to answer these questions is available through standard geochemical and petrographic analysis of ceramic artifacts. Insight into the working methods of ancient potters also has been obtained through ethnographic studies of cultures where, because of isolation or conservative traditions or both, ancient methods have been preserved.

DETERMINANTS OF THE SELECTION OF RAW MATERIALS USED IN ANIMAL FEED PRODUCTION

2020 ◽  
Vol XXII (2) ◽  
pp. 191-199
Author(s):  
Magdalena Śmiglak-Krajewska
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Soya Bean ◽  
Raw Material ◽  
Factors Affecting ◽  
Feed Production ◽  
Bean Meal ◽  
Materials Used ◽  
Soya Bean Meal ◽  
Selection Of

The main purpose of this paper was to identify the factors affecting the selection of raw materials used by feed operators in feed production. An attempt was also made to indicate the barriers to increasing the use of native protein plants by feed operators in feed production. Today, many EU countries (including Poland) primarily rely on vegetable protein derived from genetically modified soya bean meal (mainly imported from South America and the U.S.) in addressing their needs for protein raw material used in animal feed. For many years now, Poland has taken steps to increase the production and use of native protein raw material to partially replace soya bean meal imports. The use of mixes of diverse domestic protein sources derived from grain legumes (peas, field beans, lupine) can provide an advantageous alternative to compound feeding stuff based on imported post-extraction soya bean meal. To meet the objective defined above, this paper relied on the results of a 2018 survey conducted with a sample of 29 feed operators located across the country. More than half (55%) of the enterprises surveyed did not use legumes in feed production; the use of legumes was above 10% in only 3% of respondents. When asked about the key factors affecting the selection of raw materials used in production processes, the respondents declared to be interested in buying large batches of homogeneous raw materials that meet specific quality parameters (33% replied “rather yes” and 67% replied “definitely yes”). The protein content of plant seeds used in feed production was identified as another aspect of extreme importance (55% replied “rather yes” and 24% replied “definitely yes”).

Sign in / Sign up

Export Citation Format

Share Document