Using a Graph Transformation System to Improve the Quality of Characteristics of UML-RT Specifications

2011 ◽  
pp. 20-46
Author(s):  
Lars Gunske
Keyword(s):  
Data Structure ◽  
Graph Transformation ◽  
Quality Characteristics ◽  
Specification Language ◽  
Software System ◽  
Transformation System ◽  
Transformation Rules ◽  
Architecture Evolution

This chapter presents the concept of graph-based architecture evolution and how this concept can be applied to improve the quality characteristics of a software system. For this purpose, the UML-RT used as an architectural specification language is mapped to a hypergraph-based data structure. Thus, transformation operators can be specified as hypergraph transformation rules and applied automatically.

Beech sapling architecture following small and medium gap disturbances in silver fir-beech old-growth forests in Slovenia

2005 ◽  
Vol 156 (12) ◽  
pp. 481-486 ◽  
Author(s):  
Jurij Diaci ◽  
Lahorka Kozjek
Keyword(s):  
Light Intensity ◽  
Quality Characteristics ◽  
Stem Length ◽  
Silver Fir ◽  
Beech Forests ◽  
Vertical Growth ◽  
Relative Light Intensity ◽  
Stem Bending ◽  
Negative Effect

The objective of our research was to examine the effect of canopy shading on beech sapling architecture in the oldgrowth silver fir-beech forests of Pecka and Rajhenavski Rog. In August 2003 we sampled one plot (352 m2) in a large gap in Pecka, which was a result of a strong windstorm in 1983, and eight small gaps (26–78 m2) with similar sapling heights (3.8–8 m). A ground view of each gap was drawn including the characteristics of gap border trees and the density of separate sapling layers was recorded. The height and diameter were measured for each sapling, as well as the following quality characteristics on selected dominant saplings: width of the crown,number of larger branches and knots (>1/3 DBH), intensity of stem bending, deviation from vertical growth, number of terminal shoots, and the type of damage. The results show a negative effect of high canopy shading (estimated relative light intensity was below 5%) on the architectural quality of saplings. A lower overall density of saplings, greater intensity of bending and deviation from vertical growth, a shorter stem length without branches, a larger number of saplings with two terminal shoots, and a larger number of damaged saplings were observed in small gaps.

scholarly journals Quality Characteristics of Semi-Moist Apricot-Cornflakes: Effect of Different Composite Coating Application and Storage Time

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 516
Author(s):  
Roghieh Sakooei-Vayghan ◽  
Seyed Hadi Peighambardoust ◽  
Rubén Domínguez ◽  
Mirian Pateiro ◽  
José M. Lorenzo
Keyword(s):  
Storage Time ◽  
Composite Coatings ◽  
Protein Isolate ◽  
Quality Characteristics ◽  
Moisture Loss ◽  
Coating Application ◽  
Hot Air ◽  
And Storage ◽  
Β Carotene

The effect of different composite coatings on quality of semi-moist apricot cubes mixed with cornflakes was investigated during 180 days of storage. The apricot cubes were osmotically dehydrated (OD) and coated before hot-air drying (HAD) at 60 °C. Chitosan-bees wax (CBW) and whey protein isolate-bees wax-oleic acid (WPI-BW-OA) coatings were applied after HAD and the samples were added to cornflakes. Application of OD and pectin-ascorbic acid (Pec-AA) coating (prior to HAD) and WPI-BW-OA coating (after HAD) led to significant retention of total phenol compounds, β-carotene and antioxidant activity in apricot cubes compared to uncoated and CBW-coated samples. WPI-BW-OA-coated samples gave significantly higher L* values (lighter color) and b* values (more creamy or yellowish color) and lower a* values (less reddish color) and browning values than control followed by CBW-coated apricots at any time of storage (p < 0.05). The rate of apricot moisture loss and cornflakes moisture gain was higher in uncoated apricot cubes, followed by CBW- and WPI-BW-OA-coated samples. Application of WPI-BW-OA coating was effective in retaining the crispness measured by lower firmness (Fmax) values in cornflakes upon storage. Based on the obtained results, WPI-BW-OA coating allowed effectively preserving the quality characteristics of semi-moist apricot cubes and cornflakes components in the mixed state.

Exploration and Practice about Bilingual Teachers and the Network Resources Construction for Data Structure

2013 ◽  
Vol 694-697 ◽  
pp. 3675-3679
Author(s):  
Yi Xiang ◽  
Jun Peng ◽  
Qian Xiong ◽  
Liang Lei ◽  
Ming Ying You
Keyword(s):  
Data Structure ◽  
Bilingual Teachers ◽  
Network Resources ◽  
Network Teaching ◽  
Qualified Teachers ◽  
Teaching Platform ◽  
Bilingual Teaching ◽  
Resource Library ◽  
Poor Teaching

Targeting at the "Data Structure" bilingual classes with regard to the lack of qualified teachers, a sharp learning curve and the poor teaching effect that are widespread in colleges and universities, this paper gives an analysis in an attempt to find a solution to the issue on quality of teachers, by means of the development of a network teaching platform and a supporting resource library for carrying out high-quality bilingual teaching.

scholarly journals Effect of Humidity-Controlled Dehydration on Microbial Growth and Quality Characteristics of Fresh Wet Noodles

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 844
Author(s):  
Jun-Jie Xing ◽  
Dong-Hui Jiang ◽  
Zhen Yang ◽  
Xiao-Na Guo ◽  
Ke-Xue Zhu
Keyword(s):  
Shelf Life ◽  
Microbial Growth ◽  
Treatment Time ◽  
Positive Influence ◽  
Quality Characteristics ◽  
Plate Count ◽  
Cooking Properties ◽  
Total Plate Count ◽  
Different Temperatures

Humidity-controlled dehydration (HCD) was innovatively applied in this paper to control the growth of microorganisms in fresh wet noodles (FWN). Effects of HCD treatment with different temperatures (40, 60 or 80 °C), relative humidity (RH, 50%, 70% or 90%) and treatment time (5–32 min) on the total plate count (TPC), the shelf-life, and qualities of FWN were investigated. The results showed that HCD reduced the initial microbial load on the fresh noodles and extended the shelf-life up to 14–15 days under refrigeration temperature (10 °C). A 1.39 log10 CFU/g reduction for the initial TPC was achieved after HCD treatment at the temperature of 60 °C and RH of 90%. HCD with higher RH had a more positive influence on quality improvement. The L* values, the apparent stickiness, and the cooking properties of the noodle body were improved by HCD while good sensory and texture quality of noodles were still maintained after the dehydration process.

STUDY ON THE PROCESS OF RAPESEED HULLING BY THE IMPACT

2019 ◽  
Author(s):  
А.О. РЕНЗЯЕВ ◽  
О.П. РЕНЗЯЕВ ◽  
С.Н. КРАВЧЕНКО ◽  
Р.В. КРЮК
Keyword(s):  
Rotational Speed ◽  
Calculated Data ◽  
Quality Characteristics ◽  
Complete Separation ◽  
Edible Oil ◽  
Siberian Region ◽  
The Core ◽  
The Cost ◽  
The Impact

Исследованы прочностные и физико-механические свойства оболочки рапса с точки зрения ее разрушения и удаления. Установлено, что наиболее рациональным является двухстадийный способ обрушивания: 1-я стадия – на вальцовых мельницах, 2-я – на центробежной обрушивающей машине. Определены параметры центробежной обрушивающей машины для обеспечения минимальной необходимой линейной скорости 10,81 м/с: угол наклона отбойной пластины (90 ± 2)°, частота вращения барабана (2400 ± 150) об/мин. Установлено, что правильно подобранные условия и угол, под которым происходит удар, позволяют значительно снизить количество не до конца обрушенного семени и содержание расколотого ядра. При этом при свободном ударе об отбойную пластину под углом, отличным от 88–91°, или подаче недостаточно равномерного потока семян значительно увеличивается содержание необрушенных семян. На разрушение 1 кг семян необходимо затратить 58,45 Дж. Таким образом, по расчетным данным, для семян рапса диаметром 1,5 мм частота вращения барабана должна находиться в диапазоне от 2221 до 2565 об/мин при ударе семени под углом 90°. Диаметр семян рапса, выращиваемого в Сибирском регионе, составляет от 0,8 до 1,8 мм. Установлено, что подсушивание семян рапса в течение 30–40 с при температуре 100°С позволяет увеличить эффективность разрушения оболочки до полного ее отделения от ядра рапса. Представленные результаты позволяют повысить качество очистки семян рапса от оболочки и улучшить качественные характеристики получаемого масла, облегчить последующие технологические процессы получения пищевого масла, снизить затраты на рафинацию и дезодорацию на 2%. The strength and physico-mechanical properties of the shell of rapeseed in terms of its destruction and removal are investigated. It is established that the most rational is a two-stage method of seed hulling: the 1st stage – on roller mills, the 2nd – on a centrifugal hulling machine. The parameters of the centrifugal hulling machine to provide the minimum required linear speed of 10,81 m/s are defined: the angle of inclination of the turnback plate (90 ± 2)°, the rotational speed of drum (2400 ± 150) RPM. It is established that the correctly selected conditions and the angle at which the impact occurs, can significantly reduce the amount is not completely hulling seed and the substance of the split nucleus. At the same time, with a free impact on the turnback plate at an angle different from 88–91°, or the supply of an insufficiently uniform flow of seeds, the content is not completely hulling seed increases significantly. On hulling of 1 kg of seeds it is necessary to spend 58,45 J. Thus, according to the calculated data, for rape seeds with a diameter of 1,5 mm, the rotational speed of drum should be in the range from 2221 to 2565 RPM when the seed is struck at an angle of 90°. The diameter of rapeseed grown in the Siberian region ranges from 0,8 to 1,8 mm. It was found that drying of rapeseed for 30–40 s at a temperature of 100°C, can increase the efficiency of destruction of the shell to its complete separation from the core of rapeseed. The presented results make it possible to improve the quality of cleaning of rape seeds from the shell and improve the quality characteristics of the obtained oil, facilitate the subsequent technological processes of obtaining edible oil, reduce the cost of refining and deodorization by 2%.

scholarly journals A UML/OCL framework for the analysis of graph transformation rules

2009 ◽  
Vol 9 (3) ◽  
pp. 335-357 ◽  
Author(s):  
Jordi Cabot ◽  
Robert Clarisó ◽  
Esther Guerra ◽  
Juan de Lara
Keyword(s):  
Graph Transformation ◽  
Transformation Rules

Water quality of the Beli Lom river

1999 ◽  
Vol 39 (8) ◽  
pp. 55-62 ◽  
Author(s):  
Anastasios I. Stamou ◽  
Bogdana Koumanova ◽  
Stoyan Stoyanov ◽  
Georgy Atanasov ◽  
Konstantinos Pipilis
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Finite Difference ◽  
Treatment Plant ◽  
Quality Characteristics ◽  
Order Model ◽  
The Third ◽  
Do Concentration

A general methodology for the study of water quality in rivers is presented. The paper consists of four parts. In the first part the general characteristics of the area of study, which is the Beli Lom river, and its major pollution sources are presented. The effluent of the Razgrad Wastewater Treatment Plant (RWWTP) has been identified as the most significant pollution point source, due to the inadequate performance of the plant. The second part deals with data collection and processing. Four series of data have been collected, including physical, flow and water quality characteristics. In the third part a 1-d, finite-difference, second-order model is presented. In the fourth part, the model is calibrated, for the determination of its main coefficients, and is successfully verified by predicting the BOD and DO concentrations in the Beli Lom river for all series of data. Finally, the model has been applied to determine the maximum BOD and minimum DO effluent concentrations of the RWWTP, so that a minimum DO concentration is maintained throughout the river.

scholarly journals Quality characteristics of spatial furniture

2009 ◽  
pp. 135-145 ◽  
Author(s):  
Dusan Skakic ◽  
Igor Dzincic
Keyword(s):  
Quality Control ◽  
Quality Characteristics ◽  
High Quality ◽  
Production Economy ◽  
Production Practice ◽  
Basic Quality ◽  
Quality Of Products ◽  
Quality Production

The quality of products represents one of the key aims of any modern organized production. In the production practice, it is essential to establish the optimal relationship between quality, production economy and delivery deadlines. Furniture quality is evaluated by three levels and they are: basic quality, high quality and especially high quality. The results presented in this paper are based on the sample measurements of chairs and tables during 2007 and 2008 at the Institute for Furniture Quality Control.

scholarly journals Nutritional, Textural, and Sensory Quality of Aloe Vera Leaf Gel Powder Fortified Plain Cake

J ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 430-443
Author(s):  
Dhrubajyoti Singha ◽  
Md. Fahad Jubayer ◽  
Kumkum Devnath ◽  
Delara Akhter ◽  
Thottiam Vasudevan Ranganathan ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Sensory Quality ◽  
Aloe Vera ◽  
Quality Characteristics ◽  
Total Flavonoids ◽  
Total Polyphenols ◽  
Nutritional Profile ◽  
Nutrient Value ◽  
Freeze Dried

Aloe Vera leaves have great potential as an economic supplement with an adequate nutritional profile. The current study aimed to fortify plain (loaf) cakes with Aloe Vera leaf gel (AVG) powder. AVG was freeze-dried to produce Aloe Vera powder (ALP), and four plain (loaf) cakes were prepared with different proportions of ALP (0, 4, 6, and 8%). ALP contained significantly (p < 0.05) more protein (22.23 vs. 12.24), ash (19.83 vs. 0.64), and iron (175 vs. 3.05) than refined wheat flour (RWF). Along with total polyphenols and total flavonoids, ALP demonstrated good antioxidant activity. ALP-cakes and RWF-cakes were also evaluated for their nutritional and functional properties. The addition of 6 and 8% ALP to the formulation increased total polyphenols, total flavonoids, and antioxidant activity in plain (loaf) cakes. Hardness and chewiness increased in ALP-cakes but decreased in RWF-cakes, while cohesiveness and springiness decreased in ALP-cakes. In conclusion, the best formulation was a 4% ALP incorporated cake, and ALP can be supplemented in plain cakes at a rate of up to 8% to improve nutrient value. This is the first study to evaluate the quality characteristics of fortified plain (loaf) cakes using ALP.

scholarly journals Optimization of production of the fermented milk beverage based on Tibetan kefir grains

2021 ◽  
Vol 247 ◽  
pp. 01003
Author(s):  
Rustem Khabibullin ◽  
Mahmud Adylov ◽  
Galina Ezhkova
Keyword(s):  
Shelf Life ◽  
Fermented Milk ◽  
Quality Characteristics ◽  
Response Functions ◽  
Functional Dependencies ◽  
Fermentation Conditions ◽  
Milk Fermentation ◽  
Kefir Grains ◽  
Central Composite

In recent years we have seen interest in Tibetan kefir grains (TKG) for production of fermented milk beverages. The article presents the results of the work on expanding the range of fermented milk beverages based on TKG, studying the influence of fermentation conditions on quality characteristics of beverages and their shelf life. The possibility of their optimization is shown. Using the method of Central Composite Design (CCD), response functions were obtained in the form of 2nd-order polynomials, and the numerical values of the coefficient of these dependencies were calculated. The conditions of milk fermentation by Tibetan kefir grains were optimized. The numerical values of the influencing factors are: the dose of inoculate is (60 ±2) g per 100 ml of the milk, fermentation duration -(30±3) h; fermentation temperature - (35±4)°C. We also studied the effect of sea buckthorn, chokeberry and lingonberry juice additives on the quality of fermented milk drinks and their shelf life. Using the same method CCD we determined the functional dependencies of sensory indicators and shelf life of the beverage on the added amount of berry juice and sucrose. According to the results of the conducted studies, the recipe of a fermented milk beverage was modified. The optimal content of the components (per 100 ml of the drink) is: juice – (12±2) ml, sucrose - (10±1) g.

Sign in / Sign up

Export Citation Format

Share Document