Magnetic Sensors for Space Applications and Magnetic Cleanliness Considerations

2021 ◽  
pp. 147-185
Author(s):  
Anargyros T. Baklezos ◽  
Neoclis G. Hadjigeorgiou
Keyword(s):  
Magnetic Field ◽  
Quantum Interference ◽  
Measurement Techniques ◽  
General Information ◽  
Magnetic Sensors ◽  
Normal Operation ◽  
Space Applications ◽  
Recent Trends ◽  
Magneto Resistance ◽  
Magnetic Cleanliness

This chapter is composed by three parts. The first is an introductory part, providing general information about magnetism and related phenomena. Magnetic materials are also discussed and presented. Afterwards, the magnetic field and various measurement techniques are discussed. In the second part, different magnetic sensors used in a laboratory or space are presented. Magnetic sensors that are discussed include anisotropic magneto-resistance (AMR), giant magneto-resistance (GMR), giant magneto-impedance (GMI), flux-gate, and superconducting quantum interference device (SQUID). Although some of them may be outdated and well known, they are widespread, and they still pose an excellent choice for certain applications. Advances in magnetometers also presented in order to provide the reader with the recent trends in the field. Magnetic cleanliness is an important factor both in calibration and in normal operation of a system; in the third part, current techniques to isolate a system from the external magnetic field providing cleanliness are discussed.

Magnetic Sensors for Space Applications

2018 ◽  
pp. 248-283 ◽  
Author(s):  
Neoclis Hadjigergiou ◽  
Marios Sophocleous ◽  
Evangelos Hristoforou ◽  
Paul Peter Sotiriadis
Keyword(s):  
Magnetic Field ◽  
Quantum Interference ◽  
Measurement Techniques ◽  
General Information ◽  
Magnetic Sensors ◽  
Normal Operation ◽  
Space Applications ◽  
Flux Gate ◽  
Magneto Resistance ◽  
The Magnetic Field

This chapter is composed of three parts. The first is an introductory part, providing general information about magnetism and related phenomena. Magnetic materials are also discussed and presented. Afterwards, the magnetic field and various measurement techniques are discussed. In the second part, different magnetic sensors used in a laboratory or space are presented. Magnetic sensors that are discussed include anisotropic magneto-resistance (AMR), giant magneto-resistance (GMR), giant magneto-impedance (GMI), flux-gate and superconducting quantum interference device (SQUID). Although some of them may be outdated and well known, they are widespread and they still pose an excellent choice for certain applications. Magnetic cleanliness is an important factor both in calibration and in normal operation of a system; in the third part, current techniques to isolate a system from the external magnetic field providing cleanliness are discussed.

scholarly journals Fine-Tuning and Optimization of Superconducting Quantum Magnetic Sensors by Thermal Annealing

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3635 ◽  
Author(s):  
Antonio Vettoliere ◽  
Berardo Ruggiero ◽  
Massimo Valentino ◽  
Paolo Silvestrini ◽  
Carmine Granata
Keyword(s):  
Magnetic Field ◽  
Critical Current ◽  
Thermal Annealing ◽  
Quantum Interference ◽  
Magnetic Sensors ◽  
Fine Tuning ◽  
Thermal Source ◽  
Quantum Bit ◽  
Fine Control ◽  
Quantum Technology

In the present article, we present the experimental results concerning the fine-tuning and optimization of superconducting quantum interference device (SQUID) parameters by thermal annealing. This treatment allows for the modification of the parameters in order to meet a specific application or to adjust the device parameters to prevent the increase of magnetic field noise and work instability conditions due to a different critical current with respect to the design value. In particular, we report the sensor critical current, the voltage–flux (V–Φ) characteristics and the spectral density of the magnetic field of SQUID magnetometers for different annealing temperatures. The measurements demonstrate that it is possible to achieve a fine control of the most important device parameters. In particular, we show that thermal annealing allows for the reduction of SQUID noise by more than a factor of 5 and makes the device working operations very stable. These results are very useful in view of quantum technology applications related to superconducting quantum computing where the correct functioning of the quantum bit depends on the fine control of the superconducting quantum device parameters and selectable annealing is possible by using a suitable laser as a thermal source.

Magnetic Emission Mapping for Passive Integrated Components Characterisation

2003 ◽  
Author(s):  
O. Crépel ◽  
Y. Bouttement ◽  
P. Descamps ◽  
C. Goupil ◽  
P. Perdu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Mobile Phone ◽  
Printed Circuit Board ◽  
Magnetic Sensors ◽  
Circuit Board ◽  
Magnetic Disturbance ◽  
Passive Components ◽  
Printed Circuit ◽  
Integrated Inductor ◽  
The Magnetic Field

Abstract We developed a system and a method to characterize the magnetic field induced by circuit board and electronic component, especially integrated inductor, with magnetic sensors. The different magnetic sensors are presented and several applications using this method are discussed. Particularly, in several semiconductor applications (e.g. Mobile phone), active dies are integrated with passive components. To minimize magnetic disturbance, arbitrary margin distances are used. We present a system to characterize precisely the magnetic emission to insure that the margin is sufficient and to reduce the size of the printed circuit board.

scholarly journals A Novel Impedance Micro-Sensor for Metal Debris Monitoring of Hydraulic Oil

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 150
Author(s):  
Hongpeng Zhang ◽  
Haotian Shi ◽  
Wei Li ◽  
Laihao Ma ◽  
Xupeng Zhao ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Wear Debris ◽  
Detection Method ◽  
Silicon Steel ◽  
Detection Sensitivity ◽  
Normal Operation ◽  
Metal Debris ◽  
Hydraulic Oil ◽  
Steel Strips ◽  
The Magnetic Field

Hydraulic oil is the key medium for the normal operation of hydraulic machinery, which carries various wear debris. The information reflected by the wear debris can be used to predict the early failure of equipment and achieve predictive maintenance. In order to realize the real-time condition monitoring of hydraulic oil, an impedance debris sensor that can detect inductance and resistance parameters is designed and studied in this paper. The material and size of wear debris can be discriminated based on inductance-resistance detection method. Silicon steel strips and two rectangular channels are designed in the sensor. The silicon steel strips are used to enhance the magnetic field strength, and the double rectangular detection channels can make full use of the magnetic field distribution region, thereby improving the detection sensitivity and throughput of the sensor. The comparison experiment shows that the coils in series are more suitable for the monitoring of wear debris. By comparing and analyzing the direction and the presence or absence of the signal pulses, the debris sensor can detect and distinguish 46 µm iron particles and 110 µm copper particles. This impedance detection method provides a new technical support for the high-precision distinguishing measurement of metal debris. The sensor can not only be used for oil detection in the laboratory, but also can be made into portable oil detection device for machinery health monitoring.

scholarly journals Induced unconventional superconductivity on the surface states of Bi2Te3 topological insulator

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Sophie Charpentier ◽  
Luca Galletti ◽  
Gunta Kunakova ◽  
Riccardo Arpaia ◽  
Yuxin Song ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Topological Insulator ◽  
Quantum Interference ◽  
Order Parameter ◽  
Thermal Strain ◽  
Surface States ◽  
Field Pattern ◽  
Key Factors ◽  
Ordered Phases ◽  
Simultaneous Existence

Abstract Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral p x  + ip y wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson junctions, realized by using Bi2Te3 topological insulator. We demonstrate that the induced superconductivity is unconventional and consistent with a sign-changing order parameter, such as a chiral p x  + ip y component. The magnetic field pattern of the junctions shows a dip at zero externally applied magnetic field, which is an incontrovertible signature of the simultaneous existence of 0 and π coupling within the junction, inherent to a non trivial order parameter phase. The nano-textured morphology of the Bi2Te3 flakes, and the dramatic role played by thermal strain are the surprising key factors for the display of an unconventional induced order parameter.

scholarly journals A Feasibility Study of a Noncontact Torque Sensor with Multiple Hall Sensors

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Kyungshik Lee ◽  
Chongdu Cho
Keyword(s):  
Magnetic Field ◽  
Permanent Magnets ◽  
Power Transmission ◽  
Magnetic Sensors ◽  
Torque Sensor ◽  
Torque Measurement ◽  
Test Range ◽  
Variable Power ◽  
Hall Sensors ◽  
The Magnetic Field

The feasibility of a noncontact sensor is investigated. This type of sensor can potentially be used for torque measurement in a speed-variable power transmission system. Torque can be read by examining the phase difference between two induction signals from respective magnetic sensors that detect the magnetic field intensity of permanent magnets mounted on the surface of a shaft in rotation. A real-time measuring algorithm that includes filtering and calibration is adopted to measure the torque magnitude. It is shown that this new torque sensor can perform well under rotation speeds ranging from 300 rpm to 500 rpm. As an interim report rather than a complete development, this work demonstrates the feasibility of noncontact torque measurement by monitoring a magnetic field. The result shows an error of less than 2% within the full test range, which is a sufficient competitive performance for commercial sensors. The price is very low compared to competitors in the marketplace, and the device does not require special handling of the shaft of the surface.

The theory of the magneto-resistance effects in polar semi-conductors

1955 ◽  
Vol 227 (1169) ◽  
pp. 241-251 ◽  
Keyword(s):  
Magnetic Field ◽  
Field Strength ◽  
Magnetic Field Strength ◽  
Hall Coefficient ◽  
Low Temperatures ◽  
Magneto Resistance

General expressions are obtained for the Hall coefficient and transverse magneto-resistance effect in polar semi-conductors, and the variation of these effects with temperature, magnetic field strength and degeneracy of the electrons is discussed. At low temperatures the magneto-resistance effect may become very large, contrary to the prediction of the freepath theory.

scholarly journals A broadband two axis flux-gate magnetometer

1998 ◽  
Vol 41 (3) ◽  
Author(s):  
P. Palangio
Keyword(s):  
Magnetic Field ◽  
Low Frequency ◽  
High Sensitivity ◽  
Magnetic Sensors ◽  
Frequency Range ◽  
Field Station ◽  
Low Weight ◽  
Highly Sensitive ◽  
Flux Gate ◽  
Magnetic Field Variations

A broadband two axis flux-gate magnetometer was developed to obtain high sensitivity in magnetotelluric measurements. In magnetotelluric sounding, natural low frequency electromagnetic fields are used to estimate the conductivity of the Earth's interior. Because variations in the natural magnetic field have small amplitude(10-100 pT) in the frequency range 1 Hz to 100 Hz, highly sensitive magnetic sensors are required. In magnetotelluric measurements two long and heavy solenoids, which must be installed, in the field station, perpendicular to each other (north-south and east-west) and levelled in the horizontal plane are used. The coil is a critical component in magnetotelluric measurements because very slight motions create noise voltages, particularly troublesome in wooded areas; generally the installation takes place in a shallow trench. Moreover the coil records the derivative of the variations rather than the magnetic field variations, consequently the transfer function (amplitude and phase) of this sensor is not constant throughout the frequency range 0.001-100 Hz. The instrument, developed at L'Aquila Geomagnetic Observatory, has a flat response in both amplitude and phase in the frequency band DC-100 Hz, in addition it has low weight, low power, small volume and it is easier to install in the field than induction magnetometers. The sensivity of this magnetometer is 10 pT rms.

scholarly journals TECHNOLOGY AND MEASUREMENTS OF MAGNETORESISTANCE IN THIN-LAYERED FERROMAGNETIC STRUCTURES

2020 ◽  
Vol 10 (1) ◽  
pp. 44-47
Author(s):  
Jakub Kisała ◽  
Karolina Czarnacka ◽  
Mateusz Gęca ◽  
Andrzej Kociubiński
Keyword(s):  
Magnetic Field ◽  
Constant Magnetic Field ◽  
Spatial Arrangement ◽  
Field Vector ◽  
Magnetic Sensors ◽  
Layer Structures ◽  
Mems Technology ◽  
Nife Layer ◽  
The Individual ◽  
Neodymium Magnets

The paper presents the technology for obtaining NiFe/Ti/NiFe layer structures in MEMS technology using magnetron purge with the assumption of being used as semi-magnetic sensors. A series of samples was made on a glass substrate with a sandwich structure, where the individual layers were 100 nm NiFe, 10 nm Ti and on top again NiFe with a thickness of 100 nm. Measurements of DC resistance of the obtained structures in a constant magnetic field, which was produced by neodymium magnets and an electromagnet, were carried out. The obtained results confirm the occurrence of phenomena known as the magnetoresistance effect. The influence of the spatial arrangement of structures relative to the constant magnetic field vector was checked and proved.

scholarly journals The development of the magnetic system of sensor for PMR-analyser

2020 ◽  
Vol 22 (4) ◽  
pp. 115-122
Author(s):  
A. Y. Svinin ◽  
R. S. Каshaev ◽  
O. V. Коzelkov
Keyword(s):  
Magnetic Field ◽  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Magnetic System ◽  
Scientific Paper ◽  
Magnetic Sensors ◽  
Measuring Instruments ◽  
Main Task ◽  
Magnetic Field Homogeneity ◽  
Nuclear Magnetic

The enhancement of the measuring instruments accuracy has always been the most crucial task for engineers and scientists. In particular, in the field of nuclear magnetic resonance, the creation of uniform magnetic field often defines the results of measurements, therefore the main task of this study is to develop Halbach magnet array based on design characteristics of developing NMR-analyzer. The research describes the development process of the main sensor’s magnetic system components for continuous-flow portable NMR-analyzer. The scientific paper makes a different variations analysis of Halbach magnet arrays on the degree of the magnetic field homogeneity, shows the process of development and production of the 3D-framework for Halbach magnet array for NMR-analyzer. The article also gives information on the design of quartz generator based on Pierce oscillator circuit for receiver-transmitter coil of the NMR-analyzer’s sensor. The results could be useful for the magnetic sensors design with high degree of homogeneity, measuring instruments and devices using the method of nuclear magnetic resonance in its foundation.

Sign in / Sign up

Export Citation Format

Share Document