Performance Simulation and Analysis of the Progressive Distributor of the Oil-Air Lubrication by AMEsim

2013 ◽  
Vol 395-396 ◽  
pp. 1227-1232
Author(s):  
Qi Guo Sun ◽  
A Li Cai ◽  
Hong Bo Lv ◽  
Zheng Hui Zhou
Keyword(s):  
Mathematical Model ◽  
Friction Coefficient ◽  
Viscous Friction ◽  
Simulation Method ◽  
Analytic Method ◽  
Performance Simulation ◽  
Air Lubrication ◽  
Oil Flow ◽  
The Stability ◽  
The Mathematical Model

The mathematical model and the simulation model of the progressive distributor are established using an analytic method and AMEsim, a kind of simulation platform, respectively in this paper. The influences of the progressive structure, the viscous friction coefficient, the flow and pressure of the system and the size of throttle orifice on the performance of the progressive distributor are analyzed by the numerical simulation method. The results show that the fluctuations of the flow and pressure of the system are produced due to the overlapping motion of the three pistons, the oil-flow of the progressive distributor can be stabilized by choosing a reasonable viscous friction coefficient, and motion stability of the pistons of the progressive distributor, and the stability of the flow and pressure for the system are influenced by the size of throttle orifice. These conclusions will provide bases for the design of the oil-air lubricating system and the improvement of the structure of the progressive distributor.

Research on the Performance Simulation of the Transmission System of Loader with Secondary Regulating Technique

2010 ◽  
Vol 426-427 ◽  
pp. 299-302
Author(s):  
Fa Ye Zang
Keyword(s):  
Mathematical Model ◽  
Fuzzy Control ◽  
Energy Saving ◽  
High Speed ◽  
Transmission System ◽  
Performance Simulation ◽  
Constant Torque ◽  
Braking Torque ◽  
The Mathematical Model ◽  
Inertial Energy

Based on deeply analyzing the working principles and energy-saving theory of loader secondary regulating transmission system, regenerating the transmission system’s inertial energy by controlling constant torque was put forward. Considering large changes of the parameters of the transmission system and its non-linearity, a fuzzy control was adopted to control the transmission system, and the mathematical model of the system was established, then the simulations of the performance of the transmission system has been conducted. The conclusion was made that the inertial energy can be reclaimed and reused in the system by the application of the secondary regulation technology, and braking by controlling constant torque is stable, it can ensure the security of braking at high speed and also permits changing the efficiency of recovery by changing the braking torque. The system’s power has been reduced and energy saving has been achieved.

scholarly journals Shear models and parametric analysis of the PVC geomembrane-cushion interface in a high rock-fill dam

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0245245
Author(s):  
Yun-Feng Liu ◽  
Ke Gu ◽  
Yi-Ming Shu ◽  
Xian-Lei Zhang ◽  
Xin-Xin Liu ◽  
...  
Keyword(s):  
Shear Stress ◽  
Friction Coefficient ◽  
Three Dimensional ◽  
Viscous Friction ◽  
Hydraulic Pressure ◽  
Viscous Shear Stress ◽  
Box Counting ◽  
Viscous Shear ◽  
The Stability ◽  
Hysteresis Friction

As a type of flexible impermeable material, a PVC geomembrane must be cooperatively used with cushion materials. The contact interface between a PVC geomembrane and cushion easily loses stability. In this present paper, we analyzed the shear models and parameters of the interface to study the stability. Two different cushion materials were used: the common extrusion sidewall and non-fines concrete. To simulate real working conditions, flexible silicone cushions were added under the loading plates to simulate hydraulic pressure loading, and the loading effect of flexible silicone cushions was demonstrated by measuring the actual contact areas under different normal pressures between the geomembrane and cushion using the thin-film pressure sensor. According to elastomer shear stress, there are two main types of shear stress between the PVC geomembrane and the cushion: viscous shear stress and hysteresis shear stress. The viscous shear stress between the geomembrane and the cement grout was measured using a dry, smooth concrete sample, then the precise formula parameters of the viscous shear stress and viscous friction coefficient were obtained. The hysteresis shear stress between the geomembrane and the cushion was calculated by subtracting the viscous shear stress from the total shear stress. The formula parameters of the hysteresis shear stress and hysteresis friction coefficient were calculated. The three-dimensional box-counting dimensions of the cushion surface were calculated, and the formula parameters of the hysteresis friction were positively correlated with the three-dimensional box dimensions.

scholarly journals NECESSITY TO IMPROVE THE MATHEMATICAL MODEL OF FREIGHT CARS TO STUDY CASES OF ITS DERAILMENTS

2020 ◽  
pp. 442-451
Author(s):  
А.V. Batig ◽  
A. Ya. Kuzyshyn
Keyword(s):  
Mathematical Model ◽  
Mathematical Models ◽  
Computer Experiment ◽  
Rolling Stock ◽  
Software Systems ◽  
Freight Car ◽  
The Stability ◽  
The Many ◽  
The Impact ◽  
The Mathematical Model

One of the most important problems that pose a serious threat to the functioning of railways is the problem of freight cars derailment. However, according to statistics, the number of cases of the derailments of freight cars in trains annually grows. Тo prevent such cases, the necessary preventive measures are developed, and to study the causes of their occurrence, a significant number of mathematical models, programs and software systems created by leading domestic and foreign scientists. Studies of such mathematical models by the authors of this work have led to the conclusion that they are not sufficiently detailed to the extent that it is necessary for analyze the reasons of its derailment. At the same time, an analysis of the causes of the rolling stock derailments on the railways of Ukraine over the past five years showed that in about 20 % of cases they are obvious, and in 7 % of cases they are not obvious and implicitly expressed. The study of such cases of rolling stock derailment during an official investigation by the railway and during forensic railway transport expertises requires the use of an improved mathematical model of a freight car, which would allow a quantitative assessment of the impact of its parameters and rail track on the conditions of railway accidents. Therefore, taking into account the main reasons that caused the occurrence of such railroad accidents over the last five years on the railways of Ukraine, the article selected the main directions for improving the mathematical model of a freight car, allowing to cover all the many factors (explicit and hidden) and identify the most significant ones regarding the circumstances of the derailment rolling stock off the track, established on the basis of a computer experiment. It is proposed in the mathematical model of a freight car to take into account the guiding force, the value of which is one of the main indicators of the stability of the rolling stock. The authors of the article noted that not taking into account the influence of the guiding forces on the dynamics of the freight car can lead to an erroneous determination of the reasons for the rolling stock derailment or even to the impossibility of establishing them.

Walking Stability Analysis of Multi-Legged Crablike Robot over Slope

2013 ◽  
Vol 572 ◽  
pp. 636-639
Author(s):  
Xi Chen ◽  
Gang Wang
Keyword(s):  
Mathematical Model ◽  
Stability Analysis ◽  
Stability Criterion ◽  
Stability Margin ◽  
Static Stability ◽  
Matlab Simulation ◽  
And Performance ◽  
The Stability ◽  
The Mathematical Model ◽  
The Relationship

This paper deals with the walking stability analysis of a multi-legged crablike robot over slope using normalized energy stability margin (NESM) method in order to develop a common stabilization description method and achieve robust locomotion for the robot over rough terrains. The robot is simplified with its static stability being described by NESM. The mathematical model of static stability margin is built so as to carry out the simulation of walking stability over slope for the crablike robot that walks in double tetrapod gait. As a consequence, the relationship between stability margin and the height of the robots centroid, as well as its inclination relative to the ground is calculated by the stability criterion. The success and performance of the stability criterion proposed is verified through MATLAB simulation and real-world experiments using multi-legged crablike robot.

On A Formulation of the Elastic Stability Equations of Circular Cylindrical Shells Under Variable Internal Pressure

1985 ◽  
Vol 9 (2) ◽  
pp. 64-69
Author(s):  
J.L. Urrutia-Galicia ◽  
A.N. Sherbourne
Keyword(s):  
Mathematical Model ◽  
Internal Pressure ◽  
Cylindrical Shells ◽  
Direct Analysis ◽  
Elastic Stability ◽  
Equilibrium Path ◽  
Circular Cylindrical Shells ◽  
The Stability ◽  
Variable Internal Pressure ◽  
The Mathematical Model

The mathematical model of the stability analysis of circular cylindrical shells under arbitrary internal pressure is presented. The paper consists of a direct analysis of the equilibrium modes in the neighbourhood of the unperturbed principal equilibrium path. The final stability condition results in a completely symmetric differential operator which is then compared with current theories found in the literature.

scholarly journals An Approach for the Global Stability of Mathematical Model of an Infectious Disease

Symmetry ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1778
Author(s):  
Mojtaba Masoumnezhad ◽  
Maziar Rajabi ◽  
Amirahmad Chapnevis ◽  
Aleksei Dorofeev ◽  
Stanford Shateyi ◽  
...  
Keyword(s):  
Infectious Disease ◽  
Mathematical Model ◽  
Global Stability ◽  
Incidence Rates ◽  
Endemic Equilibrium ◽  
Symmetry Properties ◽  
Nonlinear Incidence Rates ◽  
Lyapunov Matrix ◽  
The Stability ◽  
The Mathematical Model

The global stability analysis for the mathematical model of an infectious disease is discussed here. The endemic equilibrium is shown to be globally stable by using a modification of the Volterra–Lyapunov matrix method. The basis of the method is the combination of Lyapunov functions and the Volterra–Lyapunov matrices. By reducing the dimensions of the matrices and under some conditions, we can easily show the global stability of the endemic equilibrium. To prove the stability based on Volterra–Lyapunov matrices, we use matrices with the symmetry properties (symmetric positive definite). The results developed in this paper can be applied in more complex systems with nonlinear incidence rates. Numerical simulations are presented to illustrate the analytical results.

scholarly journals Commissioning tests of the first hydro-generator of the Bajo de Mina HPP (Panama)

2020 ◽  
Vol 175 ◽  
pp. 05044
Author(s):  
Andrey Zuikov
Keyword(s):  
Mathematical Model ◽  
Free Surface ◽  
Empirical Data ◽  
Thrust Bearing ◽  
Third Party ◽  
Engineering Practice ◽  
Vertical Distributions ◽  
Oil Flow ◽  
The Mathematical Model

A mathematical model has been developed for calculating the distribution of azimuthal velocities and the shape of the free surface of oil in the compartments of an oil bath of a hydro-generator. The mathematical model of oil flow is verified by comparing the calculated radial-vertical distributions of normalized azimuthal velocities obtained on its basis with the free surface of the oil with the empirical data of third-party authors. The verification showed a good fit between the calculated and experimental distributions, which allows recommending the developed mathematical model for use in engineering practice. Calculations were carried out for the modes of the oil movement in the thrust bearing and the guide bearing of the hydro-generator of the Bajo de Mina HPP. Recommendations are made for the elimination of emergency modes associated with oil overflow through the fencing of the thrust bearing oil bath, which separate oil bath from the shaft of hydro-generator.

Oblique stability of circularly polarized MHD waves

1990 ◽  
Vol 43 (2) ◽  
pp. 257-268 ◽  
Author(s):  
E. Mjølhus ◽  
T. Hada
Keyword(s):  
Mathematical Model ◽  
Finite Amplitude ◽  
Mhd Waves ◽  
Circularly Polarized ◽  
Right Hand ◽  
Wave Trains ◽  
The Stability ◽  
The Right ◽  
The Mathematical Model ◽  
Dnls Equation

The stability of finite-amplitude weakly dispersive circularly polarized MHD wave trains with respect to oblique modulations is investigated. The mathematical model is a multi-dimensional extension of the DNLS equation. We have found that the right-hand-polarized wave, which is stable with respect to parallel modulations, is unstable with respect to certain oblique modulations for most primary wavenumbers.

Modeling and Stability Analysis of Hydraulic System for Wave Simulation

2013 ◽  
Vol 291-294 ◽  
pp. 1934-1939
Author(s):  
Jian Jun Peng ◽  
Yan Jun Liu ◽  
Yu Li ◽  
Ji Bin Liu
Keyword(s):  
Mathematical Model ◽  
Stability Analysis ◽  
Mathematical Models ◽  
Hydraulic System ◽  
Simulation System ◽  
Displacement Sensor ◽  
Schematic Diagram ◽  
Wave Simulation ◽  
The Stability ◽  
The Mathematical Model

This thesis put forward a hydraulic wave simulation system based on valve-controlled cylinder hydraulic system, which simulated wave movement on the land. The mathematical model of valve-controlled symmetric cylinder was deduced and the mathematical models of servo valve, displacement sensor and servo amplifier were established according to the schematic diagram of the hydraulic system designed, on the basis of which the mathematical model of hydraulic wave simulation system was obtained. Then the stability of the system was analyzed. The results indicated that the system was reliable.

Analysis of High Pressure Transients in Water Hydraulic Pipeline Using Matlab/Simulink

2014 ◽  
Vol 621 ◽  
pp. 311-316
Author(s):  
Tian Yang Zhao ◽  
Dan Jiang ◽  
Song Yu ◽  
Jie Wang ◽  
Ping Yang
Keyword(s):  
Mathematical Model ◽  
High Pressure ◽  
Turbulent Flow ◽  
Weighting Function ◽  
Viscous Friction ◽  
Dynamic Friction ◽  
Matlab Simulink ◽  
Pressure Transients ◽  
Water Hydraulic ◽  
The Mathematical Model

Based on the continuity equation and the motion equation of fluid dynamics, a mathematical model of high pressure transients in water hydraulic pipeline is presented. In the model, the friction item is consist of steady friction item and dynamic friction item, using the Darcy-Weisbach equation to solve steady viscous friction item and using four exponential terms instead of weighting function to solve dynamic friction item. By finite difference method accompanied with Matlab/Simulink, an example of high pressure turbulent flow in water hydraulic pipeline is configured so as to simulate the dynamic characteristics of pressure transients. The comparison between the observed result and the simulation result shows the mathematical model of high pressure transients in water hydraulic pipeline with turbulent flow is reasonable.

Sign in / Sign up

Export Citation Format

Share Document