Suppression of High-Frequency Interference in Signal Loop

2015 ◽  
Vol 713-715 ◽  
pp. 1081-1085
Author(s):  
Guan Qun Zhao ◽  
Ze Zhong Wang ◽  
Bo Dong ◽  
Li Li Zhao ◽  
Ke Wang
Keyword(s):  
High Frequency ◽  
Inhibitory Effect ◽  
Experimental Results ◽  
Scheduling System ◽  
Important Index ◽  
Impedance Characteristics ◽  
Zn Ferrite ◽  
Before And After ◽  
Ferrite Ring

With the deep and promotion of unattended work in substations, the correct rate of remote signal becomes an important index in automation scheduling system. For remote signal false caused by high-frequency interferences in substation, we propose the use of Ni-Zn ferrite ring to suppress high-frequency interferences. The frequency-impedance characteristics of ferrite ring with different turns are tested. And the inhibitory effect of ferrite ring on interferences below and above 100MHz is measured separately. We installed ferrite rings in remote signal loops, and compared the voltage waveforms before and after installation. Experimental results provide some references to suppress high-frequency interferences by Ni-Zn ferrite ring.

Аpplying of high-frequency monopolar diathermocoagulation in the treatment of chronic pulpitis

2020 ◽  
Vol 1 (12) ◽  
pp. 40-42
Author(s):  
F. Yu. Daurova ◽  
D. I. Tomaeva ◽  
S. V. Podkopaeva ◽  
Yu. A. Taptun
Keyword(s):  
Root Canal ◽  
High Frequency ◽  
Antibacterial Effect ◽  
Comparison Group ◽  
Poor Quality ◽  
Endodontic Treatment ◽  
Root Canals ◽  
The Third ◽  
Before And After

Relevance: the reason for the development of complications in endodontic treatment is poor-quality instrumental treatment root canals.Aims: a study of the animicrobial action and clinical efficacy of high-frequency monopolar diathermocoagulation in the treatment of chronic forms of pulpitis.Materials and methods: 102 patients with various chronic forms of pulpitis were divided into three groups of 34 patients each. In the first two groups, high-frequency monopolar diathermocoagulation was used in endodontic treatment in different modes. In the third group, endodontic treatment was carried out without the use of diathermocoagulation (comparison group). The root canal microflora in chronic pulpitis in vivo was studied twice-before and after diathermocoagulation.Results: it was established that high-frequency monopolar diathermocoagulation in the effect mode is 3, power is 4 (4.1 W) and effect is 4, power is 4 (5.4 W) with an exposure time of 3 seconds, it has a pronounced antibacterial effect on all presented pathogenic microflora obtained from the root canals of the teeth.

scholarly journals Synchronous Machine Winding Modeling Method Based on Broadband Characteristics

2021 ◽  
Vol 11 (10) ◽  
pp. 4631
Author(s):  
Yu Chen ◽  
Xiaoqing Ji ◽  
Zhongyong Zhao
Keyword(s):  
Equivalent Circuit ◽  
High Frequency ◽  
Equivalent Circuit Model ◽  
Black Box ◽  
Synchronous Machine ◽  
Circuit Model ◽  
Modeling Method ◽  
Experimental Results ◽  
Box Model ◽  
Impedance Curve

The accurate establishment of the equivalent circuit model of the synchronous machine windings’ broadband characteristics is the basis for the study of high-frequency machine problems, such as winding fault diagnosis and electromagnetic interference prediction. Therefore, this paper proposes a modeling method for synchronous machine winding based on broadband characteristics. Firstly, the single-phase high-frequency lumped parameter circuit model of synchronous machine winding is introduced, then the broadband characteristics of the port are analyzed by using the state space model, and then the equivalent circuit parameters are identified by using an optimization algorithm combined with the measured broadband impedance characteristics of port. Finally, experimental verification and comparison experiments are carried out on a 5-kW synchronous machine. The experimental results show that the proposed modeling method identifies the impedance curve of the circuit parameters with a high degree of agreement with the measured impedance curve, which indicates that the modeling method is feasible. In addition, the comparative experimental results show that, compared with the engineering exploratory calculation method, the proposed parameter identification method has stronger adaptability to the measured data and a certain robustness. Compared with the black box model, the parameters of the proposed model have a certain physical meaning, and the agreement with the actual impedance characteristic curve is higher than that of the black box model.

scholarly journals A study of the binding between radicicol and four proteins by means of spectroscopy and molecular docking

2021 ◽  
pp. 174751982199306
Author(s):  
Ya Gan ◽  
Ning Bai ◽  
Xitong Li ◽  
Shuiting Gao ◽  
Ruiyong Wang
Keyword(s):  
Molecular Docking ◽  
Human Serum ◽  
Serum Protein ◽  
Binding Constant ◽  
Inhibitory Effect ◽  
Experimental Results ◽  
Static Quenching ◽  
Spectroscopic Techniques ◽  
Quenching Process ◽  
Human Serum Protein

The interactions between radicicol and four proteins (catalase, trypsin, pepsin, and human serum protein) are investigated by spectroscopic techniques and molecular docking. A static quenching process is confirmed. The binding constant value between radicicol and human serum protein is the largest among the four proteins. Results reveal changes in the micro-environment of the protein by the addition of radicicol. It is found that radicicol shows an inhibitory effect on the activity of proteins (catalase, trypsin, and pepsin). Molecular docking results are consistent with the thermodynamic experimental results. This work provides clues to the elucidation of the mechanisms of the interactions between radicicol and proteins.

scholarly journals PCDRN: Progressive Cascade Deep Residual Network for Pansharpening

2020 ◽  
Vol 12 (4) ◽  
pp. 676 ◽  
Author(s):  
Yong Yang ◽  
Wei Tu ◽  
Shuying Huang ◽  
Hangyuan Lu
Keyword(s):  
High Resolution ◽  
Loss Function ◽  
High Frequency ◽  
Experimental Results ◽  
Superior Performance ◽  
Residual Network ◽  
High Quality ◽  
Convolution Approach ◽  
Visual Assessments ◽  
Coarse To Fine

Pansharpening is the process of fusing a low-resolution multispectral (LRMS) image with a high-resolution panchromatic (PAN) image. In the process of pansharpening, the LRMS image is often directly upsampled by a scale of 4, which may result in the loss of high-frequency details in the fused high-resolution multispectral (HRMS) image. To solve this problem, we put forward a novel progressive cascade deep residual network (PCDRN) with two residual subnetworks for pansharpening. The network adjusts the size of an MS image to the size of a PAN image twice and gradually fuses the LRMS image with the PAN image in a coarse-to-fine manner. To prevent an overly-smooth phenomenon and achieve high-quality fusion results, a multitask loss function is defined to train our network. Furthermore, to eliminate checkerboard artifacts in the fusion results, we employ a resize-convolution approach instead of transposed convolution for upsampling LRMS images. Experimental results on the Pléiades and WorldView-3 datasets prove that PCDRN exhibits superior performance compared to other popular pansharpening methods in terms of quantitative and visual assessments.

scholarly journals Simulation of Compressor Performance Deterioration due to Erosion

1989 ◽  
Author(s):  
W. Tabakoff ◽  
A. N. Lakshminarasimha ◽  
M. Pasin
Keyword(s):  
Fault Model ◽  
Experimental Results ◽  
Performance Tests ◽  
Individual Stage ◽  
One Stage ◽  
Before And After ◽  
Performance Deterioration ◽  
Compressor Performance ◽  
Multistage Compressor ◽  
The Individual

Experimental results obtained from cascades and one stage compressor performance tests before and after erosion were used to test a fault model to represent erosion. This model was implemented on a stage stacking program developed to demonstrate the effect of erosion in a multistage compressor. The effect of the individual stage erosion on the overall compressor performance is also demonstrated.

Cross-talk along gastrointestinal tract during electrical stimulation: effects and mechanisms of gastric/colonic stimulation on rectal tone in dogs

2005 ◽  
Vol 288 (6) ◽  
pp. G1195-G1198 ◽  
Author(s):  
Shi Liu ◽  
Lijie Wang ◽  
J. D. Z. Chen
Keyword(s):  
Electrical Stimulation ◽  
Inhibitory Effect ◽  
Adrenergic Blockade ◽  
Rectal Compliance ◽  
Rectal Tone ◽  
Before And After ◽  
Sensory Functions ◽  
Sympathetic Pathway ◽  
Colonic Electrical Stimulation ◽  
Stimulation Of

Gastric electrical stimulation (GES) has been shown to alter motor and sensory functions of the stomach. However, its effects on other organs of the gut have rarely been investigated. The study was performed in 12 dogs implanted with two pairs of electrodes, one on the serosa of the stomach and the other on the colon. The study was composed of two experiments. Experiment 1 was designed to study the effects of GES on rectal tone and compliance in nine dogs compared with colonic electrical stimulation (CES). Rectal tone and compliance were assessed before and after GES or CES. Experiment 2 was performed to study the involvement of sympathetic pathway in 8 of the 12 dogs. The rectal tone was recorded for 30–40 min at baseline and 20 min after intravenous guanethidine. GES or CES was given for 20 min 20 min after the initiation of the infusion. It was found that both GES and CES reduced rectal tone with comparable potency. Rectal compliance was altered neither with GES, nor with CES. The inhibitory effect of GES but not CES on rectal tone was abolished by an adrenergic blockade, guanethidine. GES inhibited rectal tone with a comparable potency with CES but did not alter rectal compliance. The inhibitory effect of GES on rectal tone is mediated by the sympathetic pathway. It should be noted that electrical stimulation of one organ of the gut may have a beneficial or adverse effect on another organ of the gut.

scholarly journals High-Frequency Oscillatory Ventilation Combined with Volume Guarantee in a Neonatal Animal Model of Respiratory Distress Syndrome

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Manuel Sánchez Luna ◽  
Martín Santos González ◽  
Francisco Tendillo Cortijo
Keyword(s):  
Animal Model ◽  
High Frequency ◽  
Distress Syndrome ◽  
Lung Surfactant ◽  
High Frequency Oscillatory Ventilation ◽  
Constant Frequency ◽  
Oscillatory Ventilation ◽  
Before And After ◽  
Lung Condition ◽  
High Frequency Oscillatory

Objective. To assess volume guarantee (VG) ventilation combined with high-frequency oscillatory ventilation (HFOV) strategy on PaCO2regulation in an experimental model of neonatal distress syndrome.Methods. Six 2-day-old piglets weighing  kg were used for this interventional experimental study. Animals were ventilated during physiologic lung conditions and after depletion of lung surfactant by bronchoalveolar lavage (BAL). The effect of HFOV combined with VG on PaCO2was evaluated at different high-frequency expired tidal volume (VThf) at constant frequency () and mean airway pressure (mPaw). Fluctuations of the pressure (ΔPhf) around the mPaw and PaCO2were analyzed before and after lung surfactant depletion.Results. PaCO2levels were inversely proportional to VThf. In the physiological lung condition, an increase in VThf caused a significant decrease in PaCO2and an increase in ΔPhf. After BAL, PaCO2did not change as compared with pre-BAL situation as the VThf remained constant by the ventilator.Conclusions. In this animal model, using HFOV combined with VG, changes in the VThf settings induced significant modifications in PaCO2. After changing the lung condition by depletion of surfactant, PaCO2remained unchanged, as the VThf setting was maintained constant by modifications in the ΔPhf done by the ventilator.

Comparison between slag refining processes for B removal with metallurgical grade silicon and Si–Sn alloy

2018 ◽  
Vol 115 (3) ◽  
pp. 312 ◽  
Author(s):  
Rowaid Al-khazraji ◽  
Yaqiong Li ◽  
Lifeng Zhang
Keyword(s):  
Removal Efficiency ◽  
Acid Leaching ◽  
Experimental Results ◽  
Mass Ratio ◽  
Metallurgical Grade Silicon ◽  
Clear Effect ◽  
Slag Refining ◽  
Before And After ◽  
Grade Silicon ◽  
Refining Processes

Boron (B) removal by slag refining using CaO–SiO2–CaCl2 was investigated in metallurgical-grade silicon (MG-Si) and 75 wt% Si–Sn alloy. Experiments were conducted at 1500 °C for 15 min. The microstructure was characterized before and after refining. The effects of acid leaching, basicity, and slag/Si mass ratio on B removal were investigated. Experimental results showed that acid leaching had no effect on B removal from MG-Si but had a clear effect on the refined Si–Sn alloy after slag refining. The final B concentration was highly affected by the CaO/SiO2 mass ratio with minimum value, where the content of B was reduced from 18.36 ppmw to 5.5 ppmw at the CaO/SiO2 = 1.2 for MG-Si slag refining and from 18.36 ppmw to 3.7 ppmw at CaO/SiO2 = 1.5 for 75 wt% Si–Sn alloy. Increasing the slag mass ratio by 2:1 mass ratio also increased B removal efficiency by approximately 15–20% more than an increase by 1:1.

Sign in / Sign up

Export Citation Format

Share Document