Biosorption of Cadmium onto Pseudomonas fluorescens: Application of Isotherm and Kinetic Models

2010 ◽  
Vol 171-172 ◽  
pp. 49-52 ◽  
Author(s):  
Chang Li Yu ◽  
Zhi Peng Lu ◽  
Fa Zhi Ge ◽  
Er Li Zhao
Keyword(s):  
Pseudomonas Fluorescens ◽  
Functional Groups ◽  
Metal Ion ◽  
Freundlich Isotherm ◽  
Industrial Effluents ◽  
Rate Equations ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Kinetics Of Adsorption ◽  
Isotherm And Kinetic Models

The present study was undertaken to evaluate the feasibility of Pseudomonas fluorescens biomass for the removal of cadmium ions from aqueous solutions. Batch experiments were performed to study the adsorption of cadmium on pH, Pseudomonas fluorescens biomass adsorbent with respect to initial Cd(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Cd(II) was 66.25 mg/g (pH 5.0 and 5 g/L biomass dose). Kinetics of adsorption followed second-order rate equations. The FTIR results of Pseudomonas fluorescens biomass showed that biomass has different functional groups and these functional groups are able to react with metal ion in aqueous solution. The results of the present study suggest that Pseudomonas fluorescens biomass can be used beneficially in treating industrial effluents containing heavy metal ions.

Adsorption of Cobalt onto Bacillus cereus: Application of Isotherm and Kinetic Models

2011 ◽  
Vol 230-232 ◽  
pp. 1169-1172
Author(s):  
Yuan Hong Wang ◽  
Hui Li Zhu ◽  
Fang Xia
Keyword(s):  
Bacillus Cereus ◽  
Practical Implication ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Isotherm And Kinetic Models ◽  
Economic Technology ◽  
Best Fit

Batch experiments were carried out to determine the capacity of Bacillus cereus biomass to adsorb Co(II) ions from aqueous solution with respect to pH, initial Co(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Co(II) was 68.10 mg/g. The best correlation was provided by the second-order kinetic model. The practical implication of this study is the development of an effective and economic technology for Co(II) removal from contaminated waters.

scholarly journals Adsorptive removal of Pb(II) ions from aqueous solution by activated carbon prepared from cabbage waste

2020 ◽  
Vol 8 ◽  
pp. 1-10
Author(s):  
Keshav Raj Paneru ◽  
Binay Kumar Jha
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Specific Surface ◽  
Metal Ion ◽  
Activated Carbons ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Adsorption Method ◽  
Surface Areas

The present study deals with the adsorption of Pb(II) from an aqueous solution on activated carbon obtained from cabbage waste. Such activated carbon was prepared by pyrolysis of cabbage waste powder at 700 °C for 1 hour in three different atmospheres, namely open air (CWAC-O), nitrogen (CWAC-N) and nitrogen with steam (CWWAC-NW). The specific surface areas of thus obtained three types of activated carbons were determined by methylene blue adsorption method and found for CWAC-O, CWAC-N and CWAC-NW as 59, 169 and 310 m2/g, respectively. Due to the highest specific surface area of CWAC-NW, the adsorption of Pb(II) experiments was performed onto CWAC-NW only. The influence of various parameters like pH, adsorbent dose, contact time and different initial concentrations of metal ion on adsorption of Pb(II) were studied. The equilibrium data for adsorption was analyzed by using Langmuir and Freundlich isotherm models. The Langmuir adsorption isotherm model was found the best fit for the experimental data. The maximum adsorption capacity was 54.945 mg/g. Kinetics results were described by a pseudo second order model with the rate constant value 0.055 g/(mg∙min). The main mechanism of the adsorption process was physicochemical adsorption and was not solely intraparticle diffusion.

scholarly journals Phenol adsorption from wastewater using cashew nut shells as adsorbent

2018 ◽  
Vol 7 (3) ◽  
pp. 966
Author(s):  
Kartik Kulkarni ◽  
Varsha Sudheer ◽  
C R Girish
Keyword(s):  
Agricultural Waste ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Phenol Adsorption ◽  
Cashew Nut ◽  
Experimental Parameters ◽  
Order Kinetic Model

The potential of agricultural waste cashew nut shells as an adsorbent for removing phenol from wastewater is presented in this paper. The adsorbent was treated with 3M sulphuric acid in order to improve the properties. The experimental parameters such as adsorbent dosage, concentration and temperature were optimized with response surface methodology (RSM). The isotherm data were tested with different isotherm models and it obeyed Freundlich Isotherm showing the multilayer adsorption. The kinetic data satisfied pseudo-first order kinetic model. The maximum adsorption capacity was calculated to be 35.08 mg/g proving the capability of cashew nut shells for removing phenol from wastewater.  

scholarly journals Modified/Unmodified Nanoparticle Adsorbents of Cellulose Origin With High Adsorptive Potential for Removal of Pb(II) From Aqueous Solution

2017 ◽  
Vol 13 (27) ◽  
pp. 425
Author(s):  
Azeh Yakubu ◽  
Gabriel Ademola Olatunji ◽  
Folahan Amoo Adekola
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Process ◽  
Correlation Coefficients ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Kinetics Of Adsorption ◽  
Kinetics Of

This investigation was conducted to evaluate the adsorption capacity of nanoparticles of cellulose origin. Nanoparticles were synthesized by acid hydrolysis of microcrystalline cellulose/cellulose acetate using 64% H3PO4 and characterized using FTIR, XRD, TGA-DTGA, BET and SEM analysis. Adsorption kinetics of Pb (II) ions in aqueous solution was investigated and the effect of initial concentration, pH, time, adsorbent dosage and solution temperature. The results showed that adsorption increased with increasing concentration with removal efficiencies of 60% and 92.99% for Azeh2 and Azeh10 respectively for initial lead concentration of 3 mg/g. The effects of contact time showed that adsorption maximum was attained within 24h of contact time. The maximum adsorption capacity and removal efficiency were achieved at pH6. Small dose of adsorbent had better performance. The kinetics of adsorption was best described by the pseudo-second-Order model while the adsorption mechanism was chemisorption and pore diffusion based on intra-particle diffusion model. The isotherm model was Freundlich. Though, all tested isotherm models relatively showed good correlation coefficients ranging from 0.969-1.000. The adsorption process was exothermic for Azeh-TDI, with a negative value of -12.812 X 103 KJ/mol. This indicates that the adsorption process for Pb by Azeh-TDI was spontaneous. Adsorption by Azeh2 was endothermic in nature.

scholarly journals Adsorption of Mn2+ from Aqueous Solution Using Manganese Oxide-Coated Hollow Polymethylmethacrylate Microspheres (MHPM)

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Dhiraj Dutta ◽  
Jyoti Prasad Borah ◽  
Amrit Puzari
Keyword(s):  
Aqueous Solution ◽  
Manganese Oxide ◽  
Adsorption Capacity ◽  
High Surface ◽  
High Surface Area ◽  
Freundlich Isotherm ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Coated Sand

Results of investigation on adsorption of Mn2+ from aqueous solution by manganese oxide-coated hollow polymethylmethacrylate microspheres (MHPM) are reported here. This is the first report on Mn-coated hollow polymer as a substitute for widely used materials like green sand or MN-coated sand. Hollow polymethylmethacrylate (HPM) was prepared by using a literature procedure. Manganese oxide (MnO) was coated on the surface of HPM (MHPM) by using the electroless plating technique. The HPM and MHPM were characterized by using optical microscopy (OM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Optical and scanning micrographs were used to monitor the surface properties of the coated layer which revealed the presence of MnO on the surface of HPM. TGA showed the presence of 4-5% of MnO in MHPM. Adsorption isotherm studies were carried out as a function of pH, initial ion concentration, and contact time, to determine the adsorption efficiency for removal of Mn2+ from contaminated water by the synthesized MHPM. The isotherm results showed that the maximum adsorption capacity of MnO-coated HPM to remove manganese contaminants from water is 8.373 mg/g. The obtained R 2 values of Langmuir isotherm and Freundlich isotherm models were 1 and 0.87, respectively. Therefore, R 2 magnitude confirmed that the Langmuir model is best suited for Mn2+ adsorption by a monolayer of MHPM adsorbent. The material developed shows higher adsorption capacity even at a higher concentration of solute ions, which is not usually observed with similar materials of this kind. Overall findings indicate that MHPM is a very potential lightweight adsorbent for removal of Mn2+ from the aqueous solution because of its low density and high surface area.

scholarly journals Adsorption of Cr6+ Onto Unmodified and Hydrochloric Acid Modified African Nutmeg Pod (Monodora myristica) from Aqueous Solution

2019 ◽  
pp. 1-8
Author(s):  
F. U. Okwunodulu ◽  
H. O. Chukwuemeka-Okorie ◽  
N. M. Mgbemena ◽  
J. B. I. Kalu
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Low Ph ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Particle Sizes ◽  
Monodora Myristica ◽  
Best Fit

The removal of Cr6+ from aqueous solution using unmodified and hydrochloric modified African nutmeg pod was studied. The effects of particle size, pH and initial metal ions concentration adsorbed were investigated. The amount of metal ion adsorbed increased as the initial metal ion concentration increased and also decreased at low pH of 2 for both modified and unmodified African nutmeg pod.  400 µm and 250 µm were the optimum particle sizes for both modified and unmodified African nutmeg pod respectively, values given as 75.8 mg/g for the modified and 93.39 mg/g for the unmodified. Generally, it was observed that the unmodified African nutmeg pod showed greater adsorption capacity than the modified African nutmeg pod. The equilibrium experimental data were examined via Langmuir and Freundlich isotherm models.  Freundlich isotherm model gave the best fit for the data in both unmodified and modified African nutmeg pod based on the correlation coefficients (R2 values) gotten. The results of the study showed that the African nutmeg pod is efficient for the removal of Cr6+ from aqueous solutions especially when unmodified.

Removal of acetaminophen (ACT) from aqueous solution by using nanosilica adsorbent: experimental study, kinetic and isotherm modeling

2020 ◽  
Vol 49 (1) ◽  
pp. 55-62
Author(s):  
Akbar Eslami ◽  
Zahra Goodarzvand Chegini ◽  
Maryam Khashij ◽  
Mohammad Mehralian ◽  
Marjan Hashemi
Keyword(s):  
Removal Rate ◽  
Synthesis Method ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Content Type ◽  
Bet Analysis ◽  
Pseudo Second Order

Purpose A nanosilica adsorbent was prepared and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and BET. Design/methodology/approach The optimum conditions for the highest adsorption performance were determined by kinetic modeling. The adsorbent was used for the adsorption of acetaminophen (ACT), and the parameters affecting the adsorption were discussed like pH, initial concentration, contact time and adsorbent dosage. The adsorbent have been characterized by SEM, XRD and BET analysis. The kinetic models including pseudo-first-order and pseudo-second-order with Langmuir and Freundlich isotherm models were applied to investigate the kinetic and isotherms parameters. Findings The adsorption of ACT increased to around 95% with the increase of nanosilica concentration to 30 g/L. Moreover, the adsorption process of ACT follows the pseudo-second-order kinetics and the Langmuir isotherm with the maximum adsorption capacity of 609 mg/g. Practical implications This study provided a simple and effective way to prepare of nanoadsorbents. This way was conductive to protect environmental and subsequent application for removal of emerging pollutants from aqueous solutions. Originality/value The novelty of the study is synthesizing the morphological and structural properties of nanosilica-based adsorbent (specific surface area, pore volume and size, shape and capability) and improving its removal rate through optimizing the synthesis method; and studying the capability of synthesis of nanosilica-based adsorbent for removal of ACT as a main emerging pharmaceutical water contaminant.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

scholarly journals Effective Biosorption of Nickel(II) from Aqueous Solutions UsingTrichoderma viride

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
P. Sujatha ◽  
V. Kalarani ◽  
B. Naresh Kumar
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Toxic Metal ◽  
Freundlich Isotherm ◽  
Recovery Process ◽  
Primary Objective ◽  
Ion Concentration ◽  
Isotherm Models

The primary objective of the present study is to evaluate the optimization conditions such as kinetic and equilibrium isotherm models involved in the removal of Ni(II) from the aqueous solutions byTrichoderma viride. The biosorbent was characterized by FTIR and SEM. The optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, initial metal ion concentration, and temperature. The maximum Ni(II) biosorption was obtained at pH 4.5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The kinetic studies indicate that the biosorption process of the metal ion Ni(II) has followed well the pseudo-second-order model. The sum of the square errors (SSE) and chi-square (χ2) tests were also carried out to find the best fit kinetic model and adsorption isotherm. The maximum biosorption capacity (qm) ofT.viridebiomass was found to be 47.6 mg/g for Ni(II) ion. Therefore, it can be concluded thatT.viridebiomass was effective and low-cost potential adsorbent to remove the toxic metal Ni(II) from aqueous solutions. The recovery process of Ni(II) fromT.viridebiomass was found to be higher than 98% by using 0.25 M HNO3. Besides the application of removal of toxic metal Ni(II) from aqueous solutions, the biosorbentT.viridecan be reused for five consecutive sorption-desorption cycles was determined.

scholarly journals Isotherm models and kinetics of copper adsorption by using hydrochar produced from hydrothermal carbonization of faecal sludge

2017 ◽  
Vol 7 (1) ◽  
pp. 102-110 ◽  
Author(s):  
Thammarat Koottatep ◽  
Krailak Fakkaew ◽  
Nutnicha Tajai ◽  
Chongrak Polprasert
Keyword(s):  
Functional Groups ◽  
Low Cost ◽  
Hydrothermal Carbonization ◽  
Pollutant Removal ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Surface Functional Groups ◽  
Water And Wastewater Treatment ◽  
Copper Adsorption ◽  
Faecal Sludge

Low cost adsorbents have been extensively reported for use as a promising substitution for commercial adsorbents for pollutant removal in water and wastewater treatment. In this study, hydrochar produced from the hydrothermal carbonization (HTC) of faecal sludge (FS) (called HTC-hydrochar) was further chemically modified with KOH (called KOH-hydrochar) to improve its surface functional groups, which were suitable for copper (Cu) removal. The adsorption of Cu was conducted using the produced HTC-hydrochar and KOH-hydrochar as absorbents. Experimental results showed the KOH-hydrochar could adsorb Cu at the maximum adsorption capacity of 18.6 mg-Cu/g-hydrochar with Cu removal efficiency of 93%, relatively higher than the HTC-hydrochar and a commercial powdered activated carbon. The quantity of the surface functional groups of the adsorbents was more effective in Cu removal than the surface area. The Cu adsorption mechanism was found to follow the pseudo-second order and intra-particle diffusion models and fit well with Freundlich and Langmuir isotherms. Application of hydrothermal carbonization could be a novel candidate to convert FS into hydrochar which is pathogen free, and to employ the produced hydrochar as an adsorbent to remove Cu from industrial wastewaters.

Sign in / Sign up

Export Citation Format

Share Document