Waste Tire Crushing and Shearing Machine Tools Working Methods of the Gap

2013 ◽  
Vol 823 ◽  
pp. 309-312 ◽  
Author(s):  
Su Ying Xu

The fine particles of tire shear blade gap adjustment requirements quickly and gap value can be controlled . Thus raised the following two questions. One is how to adjust the gap , and the second is to determine the value gap . For the above two issues are now designed shears no solution. The reason is that the tool cutting edge after installation manual measurement gap not .Machinery and no set automatic detection devices. Inserts knife blocks knife is not conducive to the gap between the tool to adjust. Size of the gap of the tool cutting of the rubber particles under conditions not very clear , the blade clearance can be adjusted using the structural design . Change processing means for processing pole . Setback legitimate work method can reduce the impact on the processing tool clearance . Cutting edge in multi-processing methods . Blade gap introduced into the gap and squeeze setback cut gap . Powder particles in the gap after being introduced to squeeze into the machining gap cutting machining . Particles larger than the machining gap will be extrusion . Cutting tool clearance is no longer the main influence .

2020 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
El Mehdi Echebba ◽  
Hasnae Boubel ◽  
Oumnia Elmrabet ◽  
Mohamed Rougui

Abstract In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.


Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1085
Author(s):  
Williams Leiva ◽  
Norman Toro ◽  
Pedro Robles ◽  
Edelmira Gálvez ◽  
Ricardo Ivan Jeldres

This research aims to analyze the impact of sodium tripolyphosphate (STPP) as a rheological modifier of concentrated kaolin slurries in seawater at pH 8, which is characteristic of copper sulfide processing operations. The dispersion phenomenon was analyzed through chord length measurements using the focused beam reflectance measurement (FBRM) technique, complementing size distributions in unweighted and square-weighted modes. The reduction of the rheological properties was significant, decreasing from 231 Pa in a reagent-free environment to 80 Pa after the application of STPP. A frequency sweep in a linear viscoelastic regime indicated that by applying a characteristic dosage of 0.53 kg/t of STPP, the pulp before yielding increases its phase angle, which increases its liquid-like character. Measurements of the chord length verified the dispersion of particles, which showed an apparent increase in the proportion of fine particles and a reduction of the coarser aggregates when STPP was applied. Measurements of the zeta potential suggested that the high anionic charge of the reagent (pentavalent) increases the electrostatic repulsions between particles, overcoming the effect of cations in seawater. The results are relevant for the mining industry, especially when the deposits have high contents of complex gangues, such as clays, that increase the rheological properties. This increases the energy costs and water consumption needed for pumping the tailings from thickeners to the tailing storages facilities. The strategies that allow for the improvement of the fluidity and deformation of the tailings generate slack in order to maximize water recovery in the thickening stages.


Author(s):  
Weiqi Xu ◽  
Chun Chen ◽  
Yanmei Qiu ◽  
Conghui Xie ◽  
Yunle Chen ◽  
...  

Organic aerosol (OA), a large fraction of fine particles, has a large impact on climate radiative forcing and human health, and the impact depends strongly on size distributions. Here we...


2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Qing-liang Zeng ◽  
Zhao-sheng Meng ◽  
Li-rong Wan ◽  
Cheng-long Wang

To study the load transfer characteristics of a two-legged shield powered support, a numerical simulation model of the support was established using the multibody dynamics software ADAMS. The model took full account of the hydraulic-elastic deformation characteristics of the support, as a series spring-damper system was used to replace the leg and the equilibrium jack. The canopy, goaf shield, lemniscate bars, and equilibrium jack are equivalent to flexible bodies. The setting force of the leg was provided by the preload of the equivalent spring, the static roof load was simulated using a slope signal, and the impact load was simulated using a step signal. Using the model, the impact and excitation effects of each hinge joint of the support were analyzed under different impact load conditions across the canopy. The results show that the location of the impact load affects the force transmissions of all hinge points of the support. Both the impact effect and the excitation effect are at a minimum when the impact force is located near the leg action line. These results are useful for the adaptive control and structural design optimization of the support.


Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5014
Author(s):  
Giovanni Benelli

The Editorial outlines recent research advances in green insecticide research. Particular attention is devoted to studies shedding light on the modes of action and non-target toxicity of natural substances of plant origin. Research focusing on the development of new formulations (including those relating to nano-objects) to magnify the effectiveness and stability of green insecticides in the field represents key advances. Herein, a carefully reviewed selection of cutting edge articles about green pesticide development recently published in Molecules is presented. The impact of sub-lethal doses of green insecticides on insect behavioral traits is still overlooked, representing a timely challenge for further research.


2011 ◽  
Vol 314-316 ◽  
pp. 1944-1947 ◽  
Author(s):  
Jozef Maščeník ◽  
Stefan Gaspar

Production of components, necessary for the construction of the machine resp. or device is a demanding manufacturing process. One of the possibilities of increasing efficiency and production quality is the introduction of unconventional technologies to the production process. Knowing the dependence of the impact of non-conventional technologies on the mechanical properties of products and their subsequent verification is an important aspect when designing and manufacturing them. The article deals with the impact of used unconventional technology, that means laser, plasma and water jet on the roughness of a cutting edge and microhardness of material S 355 J2 G3.


2016 ◽  
Vol 16 (2) ◽  
pp. 777-797 ◽  
Author(s):  
A Vara-Vela ◽  
M. F. Andrade ◽  
P. Kumar ◽  
R. Y. Ynoue ◽  
A. G. Muñoz

Abstract. The objective of this work is to evaluate the impact of vehicular emissions on the formation of fine particles (PM2.5;  ≤  2.5 µm in diameter) in the Sao Paulo Metropolitan Area (SPMA) in Brazil, where ethanol is used intensively as a fuel in road vehicles. The Weather Research and Forecasting with Chemistry (WRF-Chem) model, which simulates feedbacks between meteorological variables and chemical species, is used as a photochemical modelling tool to describe the physico-chemical processes leading to the evolution of number and mass size distribution of particles through gas-to-particle conversion. A vehicular emission model based on statistical information of vehicular activity is applied to simulate vehicular emissions over the studied area. The simulation has been performed for a 1-month period (7 August–6 September 2012) to cover the availability of experimental data from the NUANCE-SPS (Narrowing the Uncertainties on Aerosol and Climate Changes in Sao Paulo State) project that aims to characterize emissions of atmospheric aerosols in the SPMA. The availability of experimental measurements of atmospheric aerosols and the application of the WRF-Chem model made it possible to represent some of the most important properties of fine particles in the SPMA such as the mass size distribution and chemical composition, besides allowing us to evaluate its formation potential through the gas-to-particle conversion processes. Results show that the emission of primary gases, mostly from vehicles, led to a production of secondary particles between 20 and 30 % in relation to the total mass concentration of PM2.5 in the downtown SPMA. Each of PM2.5 and primary natural aerosol (dust and sea salt) contributed with 40–50 % of the total PM10 (i.e. those  ≤  10 µm in diameter) concentration. Over 40 % of the formation of fine particles, by mass, was due to the emission of hydrocarbons, mainly aromatics. Furthermore, an increase in the number of small particles impaired the ultraviolet radiation and induced a decrease in ozone formation. The ground-level O3 concentration decreased by about 2 % when the aerosol-radiation feedback is taken into account.


2021 ◽  
Author(s):  
Sarah Letaïef ◽  
Pierre Camps ◽  
Thierry Poidras ◽  
Patrick Nicol ◽  
Delphine Bosch ◽  
...  

<p>Numerous studies have already shown the possibility of tracing the sources, the<br>compositions, and the concentration of atmospheric pollutants deposited on plant<br>leaves. In environmental geochemistry, inter-element and isotope ratios from<br>chemical element assays have been used for these purposes. Alternatively,<br>environmental magnetism represents a quick and inexpensive asset that is<br>increasingly used as a relative indicator for concentrations of air pollutant on bio<br>accumulator surfaces such as plants. However, a fundamental issue is still pending:<br>Do plants in urban areas represent a sink for fine particles that is sufficiently effective<br>to improve air quality? This is a very topical issue because some studies have shown<br>that the foliage can trap fine particles by different dry deposition processes, while<br>other studies based on CFD models indicate that plant hedges in cities can hinder<br>the atmospheric dispersion of pollutants and therefore increase pollution at the level of<br>emission sources such as traffic. To date, no consensus was made because several<br>factors not necessary well known must be taken into account, such as, PM<br>concentration and size, prevailing wind, surface structures, epicuticular wax, to<br>mention just a few examples. A first step toward the understanding of the impact of<br>urban greens on air quality is the precise determination of the deposition velocity (Vd)<br>parameter. This latter is specific for each species and it is most of the time<br>underestimated in modeling-based studies by taking standard values.<br>In that perspective, we built a wind tunnel (6 m long, 86 cm wide and 86 cm high) to<br>perform analogical experiments on different endemic species. All parameters are<br>controlled, i.e, the wind speed, the nature and the injection time of pollutants (Gasoline<br>or Diesel exhausts, brakes or tires dust, etc…). We can provide the PM concentrations<br>upwind and downwind of natural reconstituted hedges by two dustmeters (LOACs -<br>MétéoModem). Beforehand, parameters such as the hedge resistance (%) or the leaf<br>area index (LAI) have been estimated for each studied specie to allow comparability<br>between plants removal potential. The interest would ultimately combine PM<br>concentration measured by size bins from the LOACs with magnetic measurements<br>(ARM, IRM100mT, IRM300mT and SIRM) of plant leaves. The idea is to check whether it<br>would be possible to precisely determine in situ the dust removal rate by urban greens<br>with environmental magnetism measurements. Up to now, we have carried out on<br>different endemic species such as Elaeagnus x ebbingei leaves and Mediterranean<br>pine needles, the results of which will be presented.</p>


Sign in / Sign up

Export Citation Format

Share Document