Research on the Key Technologies for New Large Dual-Platen High-Precision Clamping System

2010 ◽  
Vol 97-101 ◽  
pp. 64-68
Author(s):  
Jian Chen ◽  
Jin Wang ◽  
Guo Dong Lu ◽  
Zheng Qi Ling
Keyword(s):  
High Precision ◽  
Large Scale ◽  
New Technologies ◽  
Impact Factors ◽  
Adaptive Correction ◽  
Hydraulic Servo ◽  
New Type ◽  
Clamping System ◽  
Plastic Parts ◽  
First Time

High- precision and large scale are the developing trend for injection molding machine clamping system .This paper compared the characteristics of three-platen toggle and dual-platen hydraulic clamping system. The key impact factors that effecting plastic parts` precision from clamping system were discussed systematically first time. Based on these analyses, a new clamping system has been proposed and manufactured to improve the plastics parts` precision, including three new technologies: new type dual-platen structure, parallelism adaptive correction technology and numerical controlled hydraulic servo system technology. It has been applied in practical machine successfully, and experiment result proves that it is effective enough to satisfying the high-precision molding of large plastics parts.

scholarly journals ZAIGA: Zhaoshan long-baseline atom interferometer gravitation antenna

2019 ◽  
Vol 29 (04) ◽  
pp. 1940005 ◽  
Author(s):  
Ming-Sheng Zhan ◽  
Jin Wang ◽  
Wei-Tou Ni ◽  
Dong-Feng Gao ◽  
Gang Wang ◽  
...  
Keyword(s):  
High Precision ◽  
Large Scale ◽  
Atom Interferometer ◽  
Shift Measurement ◽  
Micro Particles ◽  
Long Baseline ◽  
New Type ◽  
Under Construction ◽  
Atom Interferometers ◽  
Precision Test

The Zhaoshan long-baseline Atom Interferometer Gravitation Antenna (ZAIGA) is a new type of underground laser-linked interferometer facility, and is currently under construction. It is in the 200-m-on-average underground of a mountain named Zhaoshan which is about 80[Formula: see text]km southeast to Wuhan. ZAIGA will be equipped with long-baseline atom interferometers, high-precision atom clocks, and large-scale gyros. ZAIGA facility will take an equilateral triangle configuration with two 1-km-apart atom interferometers in each arm, a 300-m vertical tunnel with atom fountain and atom clocks mounted, and a tracking-and-ranging 1-km-arm-length prototype with lattice optical clocks linked by locked lasers. The ZAIGA facility will be used for experimental research on gravitation and related problems including gravitational wave detection, high-precision test of the equivalence principle of micro-particles, clock-based gravitational red-shift measurement, rotation measurement and gravitomagnetic effect.

Development of a New Pressing Machine for Assembling Armature Components of Electro-Hydraulic Servo Valve

2012 ◽  
Vol 522 ◽  
pp. 283-287
Author(s):  
Dong Xiang Shao ◽  
Bin Li ◽  
Guang Lin Wang ◽  
Hui Feng Wang ◽  
Zhen Long Zhang
Keyword(s):  
Success Rate ◽  
High Precision ◽  
Economic Costs ◽  
Core Component ◽  
Servo Valve ◽  
The Core ◽  
Time Costs ◽  
Assembly Accuracy ◽  
Hydraulic Servo ◽  
New Type

Armature components are the core component of the electro-hydraulic servo valve, and all the components of the armature components require high precision and assembly accuracy. Now, the armature components assembly uses an old-fashioned pressing machine, whose success rate and efficiency are low. This situation wastes a great deal of economic costs and time costs. To improve this situation, the authors develop a new type of automatic assembling machine to achieve automatic and high-precision assembly of the armature component.

Scheming

2018 ◽  
Author(s):  
Seán Damer
Keyword(s):  
Social Class ◽  
Housing Policy ◽  
Large Scale ◽  
Class Structure ◽  
Local Council ◽  
Housing Scheme ◽  
Post War ◽  
First Time ◽  
The Voice ◽  
House Building

This book seeks to explain how the Corporation of Glasgow, in its large-scale council house-building programme in the inter- and post-war years, came to reproduce a hierarchical Victorian class structure. The three tiers of housing scheme which it constructed – Ordinary, Intermediate, and Slum-Clearance – effectively signified First, Second and Third Class. This came about because the Corporation uncritically reproduced the offensive and patriarchal attitudes of the Victorian bourgeoisie towards the working-class. The book shows how this worked out on the ground in Glasgow, and describes the attitudes of both authoritarian housing officials, and council tenants. This is the first time the voice of Glasgow’s council tenants has been heard. The conclusion is that local council housing policy was driven by unapologetic considerations of social class.

Model-based Control Techniques for Large-Scale High-Precision Stage

2020 ◽  
Vol 140 (4) ◽  
pp. 272-280
Author(s):  
Wataru Ohnishi ◽  
Hiroshi Fujimoto ◽  
Koichi Sakata
Keyword(s):  
High Precision ◽  
Large Scale ◽  
Model Based Control ◽  
Precision Stage ◽  
Control Techniques ◽  
Model Based

AGRICULTURAL PRODUCTION OF CA DONG PEOPLE IN RESETTLEMENT AREA OF TRANH RIVER HYDROPOWER NUMBER 2: CURRENT SITUATION AND IMPACT FACTORS

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Bùi Thị Bích Lan
Keyword(s):  
Social Relations ◽  
Agricultural Production ◽  
Large Scale ◽  
Transition Process ◽  
Impact Factors ◽  
Small Scale ◽  
Scale Production ◽  
Technical Application ◽  
Production Models ◽  
Role Of The State

In Vietnam, the construction of hydropower projects has contributed significantly in the cause of industrialization and modernization of the country. The place where hydropower projects are built is mostly inhabited by ethnic minorities - communities that rely primarily on land, a very important source of livelihood security. In the context of the lack of common productive land in resettlement areas, the orientation for agricultural production is to promote indigenous knowledge combined with increasing scientific and technical application; shifting from small-scale production practices to large-scale commodity production. However, the research results of this article show that many obstacles in the transition process are being posed such as limitations on natural resources, traditional production thinking or the suitability and effectiveness of scientific - technical application models. When agricultural production does not ensure food security, a number of implications for people’s lives are increasingly evident, such as poverty, preserving cultural identity, social relations and resource protection. Since then, it has set the role of the State in researching and building appropriate agricultural production models to exploit local strengths and ensure sustainability.

Financial and Economic Support of Innovation Processes in the Russian Fuel and Energy Complex

2019 ◽  
Vol 12 (3) ◽  
pp. 77-85
Author(s):  
L. D. Kapranova ◽  
T. V. Pogodina
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Oil And Gas ◽  
New Technologies ◽  
Innovative Development ◽  
Oil Reserves ◽  
Energy Complex ◽  
Innovation Activities ◽  
Substantial Investment ◽  
The Government

The subject of the research is the current state of the fuel and energy complex (FEC) that ensures generation of a significant part of the budget and the innovative development of the economy.The purpose of the research was to establish priority directions for the development of the FEC sectors based on a comprehensive analysis of their innovative and investment activities. The dynamics of investment in the fuel and energy sector are considered. It is noted that large-scale modernization of the fuel and energy complex requires substantial investment and support from the government. The results of the government programs of corporate innovative development are analyzed. The results of the research identified innovative development priorities in the power, oil, gas and coal sectors of the fuel and energy complex. The most promising areas of innovative development in the oil and gas sector are the technologies of enhanced oil recovery; the development of hard-to-recover oil reserves; the production of liquefied natural gas and its transportation. In the power sector, the prospective areas are activities aimed at improving the performance reliability of the national energy systems and the introduction of digital technologies. Based on the research findings, it is concluded that the innovation activities in the fuel and energy complex primarily include the development of new technologies, modernization of the FEC technical base; adoption of state-of-the-art methods of coal mining and oil recovery; creating favorable economic conditions for industrial extraction of hard-to-recover reserves; transition to carbon-free fuel sources and energy carriers that can reduce energy consumption and cost as well as reducing the negative FEC impact on the environment.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

Fast operation of large-scale high-precision matrix based on GPU

2009 ◽  
Vol 29 (4) ◽  
pp. 1177-1179 ◽  
Author(s):  
Chang SU ◽  
Zhong-liang FU ◽  
Yu-chen TAN
Keyword(s):  
High Precision ◽  
Large Scale ◽  
Precision Matrix

Conference report: innovation, interaction … and a lot of data: first time reflections on Internet Librarian International, UK 2018

2019 ◽  
Vol 36 (2) ◽  
pp. 21-22
Author(s):  
Ray Harper
Keyword(s):  
Best Practice ◽  
New Technologies ◽  
Conference Report ◽  
Library Services ◽  
New Techniques ◽  
Content Type ◽  
Making A Difference ◽  
Analyse Data ◽  
Physical Spaces ◽  
First Time

Purpose The purpose of this paper is to summarise a number of presentations at Day 1 of the Internet Librarian International conference, London, UK (16 October 2018). This was the 20th conference in the series, and the three key themes included were the next-gen library and librarian; understanding users, usage and user experience; and inclusion and inspiration: libraries making a difference. Design/methodology/approach This paper reports from the viewpoint of a first-time attendee of the conference. This summarises the main issues raised by each presentation and draws out the key learning points for practical situations. Findings The conference covered a variety of practical ways in which libraries can use technology to support users and make decisions about services. These include developing interactive physical spaces which include augmented reality; introducing “chat-bots” to support users; using new techniques to analyse data; and piloting new ways to engage users (such as coding clubs). A key theme was how we use and harness data in a way that is ethical, effective and relevant to library services. Originality/value This conference focussed on practical examples of how library and information services across sectors and countries are innovating in a period of huge change. The conference gave delegates numerous useful ideas and examples of best practice and demonstrated the strength of the profession in adapting to new technologies and developments.

Sign in / Sign up

Export Citation Format

Share Document