Effect of the Filling Pattern on the Compression Strength of 3D Printed Objects Using Acrylonitrile Butadiene Styrene (ABS)

2020 ◽  
Vol 834 ◽  
pp. 115-119
Author(s):  
Jhoselyn Reyes Morocho ◽  
Andrés Criollo Sánchez ◽  
Marco Singaña ◽  
Caterine Donoso
Keyword(s):  
Compressive Strength ◽  
Compression Strength ◽  
Acrylonitrile Butadiene Styrene ◽  
Industrial Applications ◽  
Mechanical Compression ◽  
Compression Tests ◽  
Rectangular Pattern ◽  
Deposition Modeling ◽  
3D Printed ◽  
Butadiene Styrene

The present study exhibits the behavior of ABS polymer (acrylonitrile butadiene styrene) subjected to mechanical compression tests considering two filling patterns, rectangular and hexagonal; these patterns have been selected due to the geometric arrangement of their internal structure improves the mechanical properties of 3D printed parts, in addition to the increase in tensile strength. The specimens were developed by molten deposition modeling (FDM) under the ASTM D695 standard in 2015, so five samples of each pattern were made; they have an 80% filler material. This is due to the demanding mechanical requirement in engineering applications. The results obtained show that the rectangular fill pattern at 0° and 90° registered the highest compressive strength obtaining as a result an average compression strength of 4 179.92 N, likewise a percentage of deformation of 5.96% and a maximum compressive strength of 33.147 MPa. Because of the evidenced data, the rectangular pattern is useful for engineering and industrial applications, including substituting car parts, machinery or household appliances.

scholarly journals Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide

2021 ◽  
Vol 8 (12) ◽  
pp. 199
Author(s):  
Vamiq M. Mustahsan ◽  
Amith Anugu ◽  
David E. Komatsu ◽  
Imin Kao ◽  
Srinivas Pentyala
Keyword(s):  
Compressive Strength ◽  
Bone Growth ◽  
Bone Matrix ◽  
Stress Shielding ◽  
Acrylonitrile Butadiene Styrene ◽  
3D Printed ◽  
Bone Graft Substitutes ◽  
Matrix Production ◽  
Receptor Fragment ◽  
Butadiene Styrene

Background: Currently used synthetic bone graft substitutes (BGS) are either too weak to bear the principal load or if metallic, they can support loading, but can lead to stress shielding and are unable to integrate fully. In this study, we developed biocompatible, 3D printed scaffolds derived from µCT images of the bone that can overcome these issues and support the growth of osteoblasts. Methods: Cylindrical scaffolds were fabricated with acrylonitrile butadiene styrene (ABS) and Stratasys® MED 610 (MED610) materials. The 3D-printed scaffolds were seeded with Mus musculus calvaria cells (MC3T3). After the cells attained confluence, osteogenesis was induced with and without the addition of calcitonin receptor fragment peptide (CRFP) and the bone matrix production was analyzed. Mechanical compression testing was carried out to measure compressive strength, stiffness, and elastic modulus. Results: For the ABS scaffolds, there was a 9.8% increase in compressive strength (p < 0.05) in the scaffolds with no pre-coating and the treatment with CRFP, compared to non-treated scaffolds. Similarly, MED610 scaffolds treated with CRFP showed an 11.9% (polylysine pre-coating) and a 20% (no pre-coating) increase (p < 0.01) in compressive strength compared to non-treated scaffolds. Conclusions: MED610 scaffolds are excellent BGS as they support osteoblast growth and show enhanced bone growth with enhanced compressive strength when augmented with CRFP.

scholarly journals The mechanical performance of 3D printed hierarchical honeycombs using carbon fiber and carbon nanotube reinforced acrylonitrile butadiene styrene filaments

2020 ◽  
Vol 318 ◽  
pp. 01049
Author(s):  
Michel Theodor Mansour ◽  
Konstantinos Tsongas ◽  
Dimitris Tzetzis
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Mechanical Performance ◽  
Acrylonitrile Butadiene Styrene ◽  
Compression Tests ◽  
Fused Filament Fabrication ◽  
Element Analysis ◽  
3D Printed ◽  
Experimental Findings ◽  
Butadiene Styrene

The aim of this paper is to design hierarchical honeycombs as well as manufacturing such structures with a commercial 3D Printer using Fused Filament Fabrication (FFF) technique. The materials under study are commercial filaments such as acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene styrene/carbon fibers (ABS/CF) and acrylonitrile butadiene styrene/carbon nanotubes (ABS/CNTs). The fabricated hierarchical honeycombs were examined by compression tests in order to evaluate the mechanical behaviour of such honeycomb 3D printed structures. The compression behaviour of the hierarchical honeycombs was assessed also with finite element analysis (FEA) and at the end there was a comparison with the experimental findings. The results reveal that the 2nd order hierarchy presented an increase both in stiffness and strength in comparison with the 0th and the 1st hierarchies which make such designs a suitable for structures require such properties. Also, the results reveal that ABS/carbon fiber constructs outperform the other materials under study.

scholarly journals Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing

2021 ◽  
Author(s):  
Pawan Verma ◽  
Jabir Ubaid ◽  
Andreas Schiffer ◽  
Atul Jain ◽  
Emilio Martínez-Pañeda ◽  
...  
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Essential Work ◽  
Fused Filament Fabrication ◽  
Essential Work Of Fracture ◽  
Fracture Properties ◽  
Raster Angle ◽  
3D Printed ◽  
Printing Direction ◽  
Work Of Fracture ◽  
Butadiene Styrene

AbstractExperiments and finite element (FE) calculations were performed to study the raster angle–dependent fracture behaviour of acrylonitrile butadiene styrene (ABS) thermoplastic processed via fused filament fabrication (FFF) additive manufacturing (AM). The fracture properties of 3D-printed ABS were characterized based on the concept of essential work of fracture (EWF), utilizing double-edge-notched tension (DENT) specimens considering rectilinear infill patterns with different raster angles (0°, 90° and + 45/− 45°). The measurements showed that the resistance to fracture initiation of 3D-printed ABS specimens is substantially higher for the printing direction perpendicular to the crack plane (0° raster angle) as compared to that of the samples wherein the printing direction is parallel to the crack (90° raster angle), reporting EWF values of 7.24 kJ m−2 and 3.61 kJ m−2, respectively. A relatively high EWF value was also reported for the specimens with + 45/− 45° raster angle (7.40 kJ m−2). Strain field analysis performed via digital image correlation showed that connected plastic zones existed in the ligaments of the DENT specimens prior to the onset of fracture, and this was corroborated by SEM fractography which showed that fracture proceeded by a ductile mechanism involving void growth and coalescence followed by drawing and ductile tearing of fibrils. It was further shown that the raster angle–dependent strength and fracture properties of 3D-printed ABS can be predicted with an acceptable accuracy by a relatively simple FE model considering the anisotropic elasticity and failure properties of FFF specimens. The findings of this study offer guidelines for fracture-resistant design of AM-enabled thermoplastics. Graphical abstract

scholarly journals Analysis of the Influencing Factors of FDM-Supported Positions for the Compressive Strength of Printing Components

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4008
Author(s):  
Zhengkai Feng ◽  
Heng Wang ◽  
Chuanjiang Wang ◽  
Xiujuan Sun ◽  
Shuai Zhang
Keyword(s):  
Compressive Strength ◽  
Stress Intensity ◽  
Influencing Factors ◽  
Fused Deposition Modeling ◽  
Experimental Results ◽  
Compression Tests ◽  
Suspended State ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Reference Experiment

Fused deposition modeling (FDM) has the advantage of being able to process complex workpieces with relatively simple operations. However, when processing complex components in a suspended state, it is necessary to add support parts to be processed and formed, which indicates an excessive dependence on support. The stress intensity of the supported positions of the printing components can be modified by changing the supporting model of the parts, their density, and their distance in relation to the Z direction in the FDM printing settings. The focus of the present work was to study the influences of these three modified factors on the stress intensity of the supporting position of the printing components. In this study, 99 sets of compression tests were carried out using a position of an FDM-supported part, and the experimental results were observed and analyzed with a 3D topographic imager. A reference experiment on the anti-pressure abilities of the printing components without support was also conducted. The experimental results clarify how the above factors can affect the anti-pressure abilities of the supporting positions of the printing components. According to the results, when the supporting density is 30% and the supporting distance in the Z direction is Z = 0.14, the compressive strength of the printing component is lowest. When the supporting density of the printing component is ≤30% and the supporting distance in the Z direction is Z ≥ 0.10, the compressive strength of printing without support is greater than that of the linear support model. Under the same conditions, the grid-support method offers the highest compressive strength.

An experimental investigation on mechanical performances of 3D printed lightweight ABS pipes with different cellular wall thickness

2021 ◽  
Vol 15 (2) ◽  
pp. 8169-8177
Author(s):  
Berkay Ergene ◽  
İsmet ŞEKEROĞLU ◽  
Çağın Bolat ◽  
Bekir Yalçın
Keyword(s):  
Compressive Strength ◽  
Energy Absorption ◽  
Wall Thickness ◽  
Lattice Structure ◽  
Honeycomb Structure ◽  
Cellular Structures ◽  
Compression Tests ◽  
Absorbed Energy ◽  
Great Opportunity ◽  
3D Printed

In recent years, cellular structures have attracted great deal of attention of many researchers due to their unique properties like exhibiting high strength at low density and great energy absorption. Also, the applications of cellular structures (or lattice structures) such as wing airfoil, tire, fiber and implant, are mainly used in aerospace, automotive, textile and biomedical industries respectively. In this investigation, the idea of using cellular structures in pipes made of acrylonitrile butadiene styrene (ABS) material was focused on and four different pipe types were designed as honeycomb structure model, straight rib pattern model, hybrid version of the first two models and fully solid model. Subsequently, these models were 3D printed by using FDM method and these lightweight pipes were subjected to compression tests in order to obtain stress-strain curves of these structures. Mechanical properties of lightweight pipes like elasticity modulus, specific modulus, compressive strength, specific compressive strength, absorbed energy and specific absorbed energy were calculated and compared to each other. Moreover, deformation modes were recorded during all compression tests and reported as well. The results showed that pipe models including lattice wall thickness could be preferred for the applications which don’t require too high compressive strength and their specific energy absorption values were notably capable to compete with fully solid pipe structures. In particular, rib shape lattice structure had the highest elongation while the fully solid one possessed worst ductility. Lastly, it is pointed out that 3D printing method provides a great opportunity to have a foresight about production of uncommon parts by prototyping.

scholarly journals Does vaporized hydrogen peroxide sterilization affect the geometrical properties of anatomic models and guides 3D printed from computed tomography images?

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Mauricio Toro ◽  
Aura Cardona ◽  
Daniel Restrepo ◽  
Laura Buitrago
Keyword(s):  
Computed Tomography ◽  
Hydrogen Peroxide ◽  
Dimensional Stability ◽  
Acrylonitrile Butadiene Styrene ◽  
Dimensional Error ◽  
Material Extrusion ◽  
Anatomic Models ◽  
3D Printed ◽  
Mean Differences ◽  
Butadiene Styrene

Abstract Background Material extrusion is used to 3D print anatomic models and guides. Sterilization is required if a 3D printed part touches the patient during an intervention. Vaporized Hydrogen Peroxide (VHP) is one method of sterilization. There are four factors to consider when sterilizing an anatomic model or guide: sterility, biocompatibility, mechanical properties, and geometric fidelity. This project focuses on geometric fidelity for material extrusion of one polymer acrylonitrile butadiene styrene (ABS) using VHP. Methods De-identified computed tomography (CT) image data from 16 patients was segmented using Mimics Innovation Suite (Materialise NV, Leuven, Belgium). Eight patients had maxillary and mandibular defects depicted with the anatomic models, and eight had mandibular defects for the anatomic guides. Anatomic models and guides designed from the surfaces of CT scan reconstruction and segementation were 3D printed in medical-grade acrylonitrile butadiene styrene (ABS) material extrusion. The 16 parts underwent low-temperature sterilization with VHP. The dimensional error was estimated after sterilization by comparing scanned images of the 3D printed parts. Results The average of the estimated mean differences between the printed pieces before and after sterilization were − 0,011 ± 0,252 mm (95%CI − 0,011; − 0,010) for the models and 0,003 ± 0,057 mm (95%CI 0,002; 0,003) for the guides. Regarding the dimensional error of the sterilized parts compared to the original design, the estimated mean differences were − 0,082 ± 0,626 mm (95%CI − 0,083; − 0,081) for the models and 0,126 ± 0,205 mm (95%CI 0,126, 0,127) for the guides. Conclusion This project tested and verified dimensional stability, one of the four prerequisites for introducing vaporized hydrogen peroxide into 3D printing of anatomic models and guides; the 3D printed parts maintained dimensional stability after sterilization.

scholarly journals The Effect of Polymer-Cement Stabilization on the Unconfined Compressive Strength of Liquefiable Soils

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Ali Ateş
Keyword(s):  
Compressive Strength ◽  
Compression Strength ◽  
Unconfined Compressive Strength ◽  
Soil Stabilization ◽  
Sandy Soils ◽  
Pulse Velocity ◽  
Unit Weight ◽  
Unconfined Compression Strength ◽  
Compression Tests ◽  
Unconfined Compression

Soil stabilization has been widely used as an alternative to substitute the lack of suitable material on site. The use of nontraditional chemical stabilizers in soil improvement is growing daily. In this study a laboratory experiment was conducted to evaluate the effects of waterborne polymer on unconfined compression strength and to study the effect of cement grout on pre-venting of liquefiable sandy soils. The laboratory tests were performed including grain size of sandy soil, unit weight, ultrasonic pulse velocity, and unconfined compressive strength test. The sand and various amounts of polymer (1%, 2%, 3%, and 4%) and cement (10%, 20%, 30%, and 40%) were mixed with all of them into dough using mechanical kneader in laboratory conditions. Grouting experiment is performed with a cylindrical mould of  mm. The samples were subjected to unconfined compression tests to determine their strength after 7 and 14 days of curing. The results of the tests indicated that the waterborne polymer significantly improved the unconfined compression strength of sandy soils which have susceptibility of liquefaction.

Sign in / Sign up

Export Citation Format

Share Document