Compressive Behavior and Deformation Characteristic of Al-Based Auxetic Lattice Structure Filled with Silicate Rubber

2018 ◽  
Vol 933 ◽  
pp. 240-245
Author(s):  
Ying Ying Xue ◽  
Xing Fu Wang ◽  
Xin Fu Wang ◽  
Fu Sheng Han
Keyword(s):  
Mechanical Properties ◽  
Relative Density ◽  
Composite Structures ◽  
Lattice Structure ◽  
Deformation Characteristic ◽  
Damage Mechanism ◽  
Lattice Structures ◽  
Compressive Behavior ◽  
Plateau Region ◽  
Pressure Infiltration

The composites composed of Al-based auxetic lattice structures and silicate rubbers were fabricated by pressure infiltration technology. The compressive behavior and deformation characteristic of the composites were investigated related with the relative densities of the auxetic lattice structures. We found that the composites exhibit a longer plateau region than the non-filled Al-based auxetic lattice structures, and the relative density of the auxetic lattice structures play an important role in the compressive mechanical properties, the higher the relative density, the higher flow stress. It is also noticing that, the composite structures show different deformation and damage mechanism due to the filled incompressible silicate rubber. It is expected that the study may provide useful information for the applications of composite structure.

scholarly journals Dual Graded Lattice Structures: Generation Framework and Mechanical Properties Characterization

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1528
Author(s):  
Khaled G. Mostafa ◽  
Guilherme A. Momesso ◽  
Xiuhui Li ◽  
David S. Nobes ◽  
Ahmed J. Qureshi
Keyword(s):  
Mechanical Properties ◽  
Relative Density ◽  
Lattice Structure ◽  
Cell Types ◽  
Functionally Graded ◽  
Unit Cell ◽  
Lattice Structures ◽  
Unit Cells ◽  
Mechanical Properties Characterization ◽  
Graded Lattice

Additive manufacturing (AM) enables the production of complex structured parts with tailored properties. Instead of manufacturing parts as fully solid, they can be infilled with lattice structures to optimize mechanical, thermal, and other functional properties. A lattice structure is formed by the repetition of a particular unit cell based on a defined pattern. The unit cell’s geometry, relative density, and size dictate the lattice structure’s properties. Where certain domains of the part require denser infill compared to other domains, the functionally graded lattice structure allows for further part optimization. This manuscript consists of two main sections. In the first section, we discussed the dual graded lattice structure (DGLS) generation framework. This framework can grade both the size and the relative density or porosity of standard and custom unit cells simultaneously as a function of the structure spatial coordinates. Popular benchmark parts from different fields were used to test the framework’s efficiency against different unit cell types and grading equations. In the second part, we investigated the effect of lattice structure dual grading on mechanical properties. It was found that combining both relative density and size grading fine-tunes the compressive strength, modulus of elasticity, absorbed energy, and fracture behavior of the lattice structure.

scholarly journals Design Optimization of Lattice Structures under Compression: Study of Unit Cell Types and Cell Arrangements

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 97
Author(s):  
Kwang-Min Park ◽  
Kyung-Sung Min ◽  
Young-Sook Roh
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Relative Density ◽  
Lattice Structure ◽  
Density Ratio ◽  
Cell Types ◽  
Unit Cell ◽  
Structure Characterization ◽  
Optimized Design ◽  
Lattice Structures

Additive manufacturing enables innovative structural design for industrial applications, which allows the fabrication of lattice structures with enhanced mechanical properties, including a high strength-to-relative-density ratio. However, to commercialize lattice structures, it is necessary to define the designability of lattice geometries and characterize the associated mechanical responses, including the compressive strength. The objective of this study was to provide an optimized design process for lattice structures and develop a lattice structure characterization database that can be used to differentiate unit cell topologies and guide the unit cell selection for compression-dominated structures. Linear static finite element analysis (FEA), nonlinear FEA, and experimental tests were performed on 11 types of unit cell-based lattice structures with dimensions of 20 mm × 20 mm × 20 mm. Consequently, under the same relative density conditions, simple cubic, octahedron, truncated cube, and truncated octahedron-based lattice structures with a 3 × 3 × 3 array pattern showed the best axial compressive strength properties. Correlations among the unit cell types, lattice structure topologies, relative densities, unit cell array patterns, and mechanical properties were identified, indicating their influence in describing and predicting the behaviors of lattice structures.

A Novel Design Method for Nonuniform Lattice Structures Based on Topology Optimization

2018 ◽  
Vol 140 (9) ◽  
Author(s):  
Yafeng Han ◽  
Wen Feng Lu
Keyword(s):  
Mechanical Properties ◽  
Topology Optimization ◽  
Relative Density ◽  
Common Ground ◽  
Lattice Structure ◽  
Design Method ◽  
Lattice Structures ◽  
Structural Wall ◽  
Unit Cells ◽  
The Common

Lattice structures are broadly used in lightweight structure designs and multifunctional applications. Especially, with the unprecedented capabilities of additive manufacturing (AM) technologies and computational optimization methods, design of nonuniform lattice structures has recently attracted great research interests. To eliminate constraints of the common “ground structure approaches” (GSAs), a novel topology optimization-based method is proposed in this paper. Particularly, the structural wall thickness in the proposed design method was set as uniform for better manufacturability. As a solution to carry out the optimized material distribution for the lattice structure, geometrical size of each unit cell was set as design variable. The relative density model, which can be obtained from the solid isotropic microstructure with penalization (SIMP)-based topology optimization method, was mapped into a nonuniform lattice structure with different size cells. Finite element analysis (FEA)-based homogenization method was applied to obtain the mechanical properties of these different size gradient unit cells. With similar mechanical properties, elements with different “relative density” were translated into unit cells with different size. Consequently, the common topology optimization result can be mapped into a nonuniform lattice structure. This proposed method was computationally and experimentally validated by two different load-support design cases. Taking advantage of the changeable surface-to-volume ratio through manipulating the cell size, this method was also applied to design a heat sink with optimum heat dissipation efficiency. Most importantly, this design method provides a new perspective to design nonuniform lattice structures with enhanced functionality and manufacturability.

scholarly journals Dynamic Loading of Lattice Structure Made by Selective Laser Melting-Numerical Model with Substitution of Geometrical Imperfections

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2129 ◽  
Author(s):  
Radek Vrána ◽  
Ondřej Červinek ◽  
Pavel Maňas ◽  
Daniel Koutný ◽  
David Paloušek
Keyword(s):  
Mechanical Properties ◽  
Numerical Model ◽  
Cross Section ◽  
Lattice Structure ◽  
Low Velocity Impact ◽  
Lattice Structures ◽  
Laser Melting ◽  
Low Velocity ◽  
Velocity Impact ◽  
Geometrical Imperfections

Selective laser melting (SLM) is an additive technology that allows for the production of precisely designed complex structures for energy absorbing applications from a wide range of metallic materials. Geometrical imperfections of the SLM fabricated lattice structures, which form one of the many thin struts, can lead to a great difference in prediction of their behavior. This article deals with the prediction of lattice structure mechanical properties under dynamic loading using finite element method (FEA) with inclusion of geometrical imperfections of the SLM process. Such properties are necessary to know especially for the application of SLM fabricated lattice structures in automotive or aerospace industries. Four types of specimens from AlSi10Mg alloy powder material were manufactured using SLM for quasi-static mechanical testing and determination of lattice structure mechanical properties for the FEA material model, for optical measurement of geometrical accuracy, and for low-velocity impact testing using the impact tester with a flat indenter. Geometries of struts with elliptical and circular cross-sections were identified and tested using FEA. The results showed that, in the case of elliptical cross-section, a significantly better match was found (2% error in the Fmax) with the low-velocity impact experiments during the whole deformation process compared to the circular cross-section. The FEA numerical model will be used for future testing of geometry changes and its effect on mechanical properties.

Finite element analysis of gradient lattice structure patterns for bone implant design

2020 ◽  
Vol 11 (4) ◽  
pp. 535-545
Author(s):  
Asliah Seharing ◽  
Abdul Hadi Azman ◽  
Shahrum Abdullah
Keyword(s):  
Finite Element Analysis ◽  
Relative Density ◽  
Mechanical Behaviour ◽  
Lattice Structure ◽  
Lattice Structures ◽  
Element Analysis ◽  
Bone Implant ◽  
Content Type ◽  
Octet Truss ◽  
Structure Patterns

PurposeThe objective of this paper is to identify suitable lattice structure patterns for the design of porous bone implants manufactured using additive manufacturing.Design/methodology/approachThe study serves to compare and analyse the mechanical behaviours between cubic and octet-truss gradient lattice structures. The method used was uniaxial compression simulations using finite element analysis to identify the translational displacements.FindingsFrom the simulation results, in comparison to the cubic lattice structure, the octet-truss lattice structure showed a significant difference in mechanical behaviour. In the same design space, the translational displacement for both lattice structures increased as the relative density decreased. Apart from the relative density, the microarchitecture of the lattice structure also influenced the mechanical behaviour of the gradient lattice structure.Research limitations/implicationsGradient lattice structures are suitable for bone implant applications because of the variation of pore sizes that mimic the natural bone structures. The complex geometry that gradient lattice structures possess can be manufactured using additive manufacturing technology.Originality/valueThe results demonstrated that the cubic gradient lattice structure has the best mechanical behaviour for bone implants with appropriate relative density and pore size.

The Mechanical Properties of Hierarchical Truss-Walled Lattice Materials

2017 ◽  
Vol 09 (02) ◽  
pp. 1750027 ◽  
Author(s):  
Fangfang Sun ◽  
Qing Zheng ◽  
Hualin Fan ◽  
Daining Fang
Keyword(s):  
Mechanical Properties ◽  
Lattice Structure ◽  
Wall Structure ◽  
Lattice Structures ◽  
Mechanical Behaviors ◽  
Hierarchical Lattice ◽  
Buckling Stress ◽  
Lattice Materials ◽  
Buckling Resistance ◽  
Theoretical Analyses

To construct a hierarchical lattice structure (HLS), truss wall is introduced into ordinary lattice structure (OLS). Young’s modulus, yield strength and buckling stress of HLSs were evaluated theoretically. Failure maps of different HLSs were plotted and compared based on the theoretical analyses. It is indicated that mechanical behaviors of hexagonal HLSs made of triangular lattice walls can be greatly enhanced by the hierarchical wall structure, while properties of triangular HLSs are weakened, except the anti-buckling resistance. When HLSs are made of bending-dominated honeycomb walls, their properties will be reduced, indicating that hierarchical structure should be appropriately designed to make ultra-light structures benefit from this construction. This viewpoint is strengthened by the discussions on the performances of high order lattice structures, where only bending-dominated HLSs with stretching-dominated lattice wall benefit from the hierarchy.

scholarly journals Investigations on Mechanical Properties of Lattice Structures with Different Values of Relative Density Made from 316L by Selective Laser Melting (SLM)

2020 ◽  
Author(s):  
Paweł Płatek ◽  
Judyta Sienkiewicz ◽  
Jacek Janiszewski ◽  
Fengchun Jiang
Keyword(s):  
Relative Density ◽  
Selective Laser Melting ◽  
Dynamic Testing ◽  
Lattice Structure ◽  
Lattice Structures ◽  
X Ray Diffraction ◽  
Laser Melting ◽  
Geometrical Quality ◽  
Xrd Patterns ◽  
Dynamic Loading Conditions

Nine variants of regular lattice structures with different relative densities have been designed and successfully manufactured. The produced structures have been subjected to geometrical quality control, and the manufacturability of the implemented selective laser melting SLM technique has been assessed. It was found that the dimensions of the produced lattice struts differ from those of the designed struts. These deviations depend on the direction of geometrical evaluation. Additionally, the microstructures and phase compositions of the obtained structures were characterized and compared with those of conventionally produced 316L stainless steel. The microstructure analysis and X-Ray Diffraction XRD patterns revealed a single austenite phase in the SLM samples. Both a certain broadening and a displacement of the austenite peaks were observed due to residual stresses and a crystallographic texture induced by the SLM process. Furthermore, the mechanical behavior of the lattice structure material has been defined. It was demonstrated that under both quasi-static and dynamic testing, lattice structures with high relative densities are stretch-dominated, whereas those with low relative densities are bending-dominated. Moreover, the linear relationship between the energy absorption and relative density under dynamic loading conditions has been defined

scholarly journals Evaluating Lattice Mechanical Properties for Lightweight Heat-Resistant Load-Bearing Structure Design

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4786
Author(s):  
Xinglong Wang ◽  
Cheng Wang ◽  
Xin Zhou ◽  
Di Wang ◽  
Mingkang Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Topology Optimization ◽  
Porous Structure ◽  
Relative Density ◽  
Deformation Behavior ◽  
Optimization Design ◽  
Engineering Practice ◽  
Lattice Structures ◽  
Load Bearing ◽  
Heat Resistant

Heat-resistant, load-bearing components are common in aircraft, and they have high requirements for lightweight and mechanical performance. Lattice topology optimization can achieve high mechanical properties and obtain lightweight designs. Appropriate lattice selection is crucial when employing the lattice topology optimization method. The mechanical properties of a structure can be optimized by choosing lattice structures suitable for the specific stress environment being endured by the structural components. Metal lattice structures exhibit excellent unidirectional load-bearing performance and the triply periodic minimal surface (TPMS) porous structure can satisfy multi-scale free designs. Both lattice types can provide unique advantages; therefore, we designed three types of metal lattices (body-centered cubic (BCC), BCC with Z-struts (BCCZ), and honeycomb) and three types of TPMS lattices (gyroid, primitive, and I-Wrapped Package (I-WP)) combined with the solid shell. Each was designed with high level of relative density (40%, 50%, 60%, 70%, and 80%), which can be directly used in engineering practice. All test specimens were manufactured by selective laser melting (SLM) technology using Inconel 718 superalloy as the material and underwent static tensile testing. We found that the honeycomb test specimen exhibits the best strength, toughness, and stiffness properties among all structures evaluated, which is especially suitable for the lattice topology optimization design of heat-resistant, unidirectional load-bearing structures within aircraft. Furthermore, we also found an interesting phenomenon that the toughness of the primitive and honeycomb porous test specimens exhibited sudden increases from 70% to 80% and from 50% to 60% relative density, respectively, due to their structural characteristics. According to the range of the exponent value n and the deformation laws of porous structures, we also concluded that a porous structure would exhibit a stretching-dominated deformation behavior when exponent value n < 0.3, a bending-dominated deformation behavior when n > 0.55, and a stretching-bending-dominated deformation behavior when 0.3 < n < 0.55. This study can provide a design basis for selecting an appropriate lattice in lattice topology optimization design.

scholarly journals FEM analysis of 3D lattice structures of ABS material

2021 ◽  
Vol 12 (6) ◽  
pp. 648-652
Author(s):  
Seong-Gyu Cho Et.al
Keyword(s):  
Mechanical Properties ◽  
Stress Concentration ◽  
Lattice Structure ◽  
Three Dimensional ◽  
Parametric Modeling ◽  
Lattice Structures ◽  
Filling Rate ◽  
Dimensional Lattice ◽  
Stress And Deformation ◽  
Fcc Structure

FDM is a typical additive manufacturing method. Since FDM is a method of stacking layers one by one, it generally has a flat lattice structure. In this study, by checking the distribution of stress and deformation for several lattice structures made of ABS material, it is intended to find a structure with better mechanical properties with less material. Several three-dimensional lattice structures are modeled using parametric modeling. Subsequently, a constant pressure is applied to the same area to check the stress and strain distribution. A structure with a low maximum stress value in the stress concentration region and a small amount of deformation will have the best mechanical properties. To do this, parametric modeling is performed using Inventor to model four three-dimensional lattice structures. Afterwards, use Ansys Workbench to check the stress and deformation distribution. Looking at the stress distribution, stress concentration occurred in the truss supporting the upper surface of the SC structure. In the BCC and PTC structures, stress concentration occurred at the point where the upper surface and the truss met. In the FCC structure, it can be seen that the load is distributed throughout the truss structure. Looking at the deformation distribution, both the SC and BCC structures show similar amounts of deformation. It was confirmed that the FCC structure had less maximum deformation than the PTC structure with the thickest truss. Unlike previous studies, it was confirmed that the higher the internal filling rate, the better the mechanical properties may not come out. The FDM method can obtain different mechanical properties depending on the internal lattice structure as well as the internal filling rate. In a later study, we will find a new calculation algorithm that applies variables by FDM characteristics using the data obtained by printing the actual specimen.

Investigation on Process-Properties Relationship with Mechanical Properties of Lattice-Structured Cellular Material for Lightweight Application

2018 ◽  
Vol 7 (3.17) ◽  
pp. 1
Author(s):  
N A. Rosli ◽  
R Hasan ◽  
W H. Ng ◽  
M K. Baharudin ◽  
M R. Alkahari
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Lattice Structure ◽  
Testing Machine ◽  
Lattice Structures ◽  
Universal Testing ◽  
Lightweight Structure ◽  
Energy Absorbing ◽  
Printing Machine ◽  
Operational Time

Lattice structures possess exceptional mechanical strength resulting in highly efficient load supporting systems. The lattice structure has been receiving interest in a variety of application areas and industries such as automotive, shipping and aeronautic. The metallic or polymer micro lattice structure can be categorized as lightweight and energy-absorbing structure. These characteristics are best applied to transportation part where the lightweight structure will help reduce its overall weight, thus increase the operational time since energy and cost consumption is a big concern in the industry these days. The aim of this study is to investigate relationship between process-properties and mechanical performance of polymer lattice structure. The lattice structure was designed by using SolidWorks software and fabricated using CubePro 3D printing machine. Compression test was performed by Instron 5585 universal testing machine to analyse the strength of the lattice structure. It was found that lattice structure manufactured with the setting of solid print strength, honeycomb print pattern, 70 µm layer thickness and strut diameter of 2.4 mm possesses the optimum mechanical property. 

Sign in / Sign up

Export Citation Format

Share Document