scholarly journals Two galling insects (Hartigiola annulipes and Mikiola fagi), one host plant (Fagus sylvatica) – differences between leaf and gall chemical composition

10.46490/474 ◽  
2020 ◽  
Vol 26 (2) ◽  
Author(s):  
Sebastian Pilichowski ◽  
Marian Jędrzej Giertych

Gall-inducing organisms change the chemical properties of galled organs and host plants due to the development of gall tissues that are supposed to shelter the galler and provide it with nutrients. Hartigiola annulipes and Mikiola fagi represent the gall midge family (Diptera; Cecidomyiidae). They share a host plant species, the common beech (Fagus sylvatica), whose leaves they use for galling. Their galls are single-chambered and occur on the upper side of the leaf blade. The morphologies of their galls are different, but there are a lack of studies comparing the impact of both species on the common host. Thus, this was the aim of this study. We analysed the total contents of carbon, nitrogen, soluble carbohydrates, starch, soluble phenolics and tannins in galls, galled leaves with removed galls and leaves without galls collected in two different forest stands in western Poland (a Scots pine forest with artificially-planted beech trees and a natural beech forest). The influence of the studied gallers on the leaves is species- and forest-dependent. Perhaps seasonal changes and the level of infestation are also responsible for the chemical changes. The content of soluble carbohydrates in the galls of H. annulipes reaches an optimized level and is independent of the forest type. A high infestation level by H. annulipes is manifested itself in an elevated content of total soluble phenolics and tannins in leaves, while gall tissues do not accumulate soluble phenolics. The low levels of nitrogen in the gall tissues of both gallers leads to the rejection of the nutrition hypothesis; however, M. fagi galls act as sinks for soluble carbohydrates.

2008 ◽  
Vol 2 (No. 2) ◽  
pp. 35-44 ◽  
Author(s):  
L. Pavlů ◽  
L. Borůvka ◽  
A. Nikodem ◽  
M. Rohošková ◽  
V. Penížek

This paper is focused on the Jizera Mountains as a region strongly influenced by man in the past. The structure of the natural forest was changed. Species monocultures with similar tree ages were planted. High acidificants concentrations in atmosphere led to the decline of these monoculture forests in the top parts of the mountains and the high acidificants deposition damaged the soils in the whole region. The goals of this study are to describe the distribution of the soil properties in altitude transects, where temperature, precipitation, and vegetation gradients are recorded, and to compare the soil properties in spruce and beech forests. The soil samples were collected from soil pits in a surviving nature-close beech forest, in a production spruce forest, and also in the top dead forest area with a grass cover. Soil samples from sufficiently deep diagnostic horizons were taken for the study of chemical properties. The basic soil characteristics were determined by the commonly used methods (pH, effective cation exchange capacity &minus; eCEC, and the contents of cations in the sorption complex, A<sub>400</sub>/A<sub>600</sub> as humus quality parameter, the contents of available Ca, Mg, K and P, pseudototal content of Ca and Mg, and two differently extracted Fe and Al forms contents). The soils of the Jizera Mts. are strongly acid with a low eCEC which is the result of the natural and anthropogenic acidification processes. Soil chemical properties of the most affected top mountainous parts are in some aspects more favourable than lower parts (binding of potentially toxic Al in organic matter, slightly higher pH), but in other aspects they are still endangered by the acidification symptoms (higher leaching of base cations, especially Mg). The soils of nature-close beech forests represent more favourable soil properties than those of planted spruce forests. Generally, it can be concluded that the natural systems have higher resilience, and that natural mechanisms are able to mitigate slightly the soil degradation.


2020 ◽  
Vol 64 (1) ◽  
pp. 135-153 ◽  
Author(s):  
Lauren Elizabeth Smith ◽  
Adelina Rogowska-Wrzesinska

Abstract Post-translational modifications (PTMs) are integral to the regulation of protein function, characterising their role in this process is vital to understanding how cells work in both healthy and diseased states. Mass spectrometry (MS) facilitates the mass determination and sequencing of peptides, and thereby also the detection of site-specific PTMs. However, numerous challenges in this field continue to persist. The diverse chemical properties, low abundance, labile nature and instability of many PTMs, in combination with the more practical issues of compatibility with MS and bioinformatics challenges, contribute to the arduous nature of their analysis. In this review, we present an overview of the established MS-based approaches for analysing PTMs and the common complications associated with their investigation, including examples of specific challenges focusing on phosphorylation, lysine acetylation and redox modifications.


2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.


2020 ◽  
Vol 26 (4) ◽  
pp. 358-365
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan

1985 ◽  
Vol 17 (6-7) ◽  
pp. 1187-1198 ◽  
Author(s):  
G. Mance ◽  
A. R. O'Donnell

This paper discusses the derivation of environmental quality standards for coastal waters and the difficulties of using such standards for controlling industrial discharges. Attention is focused on the common List II substances, copper, chromium, lead, nickel, zinc and arsenic - and their effects on marine life. The adequacy of existing toxicity data is discussed and it is concluded that long exposure tests are required to provide information on sublethal effects. Such data are currently limited. It is also important that consideration be given to the effects that reducing salinities and increasing temperatures have in increasing the toxicity of these substances. The complexity of interpreting the results of laboratory toxicity data to coastal waters is discussed with reference to a study of the impact of an industrial discharge.


2020 ◽  
Vol 12 (17) ◽  
pp. 17374-17379
Author(s):  
W.G.D. Chathuranga ◽  
K. Kariyawasam ◽  
Anslem De Silva ◽  
W.A.Priyanka P. De Silva

We investigated the impact of dipteran predators on eggs in foam nests of the Common Hour-glass Tree Frog Polypedates cruciger Blyth, 1852 (Anura: Rhacophoridae) in central Sri Lanka.  Foam nests (n=24) of P. cruciger were examined at their natural breeding habitats and infected (n=8) and uninfected spawns (n=16) were identified.  Emerging tadpoles were collected in a water container hung under each spawn and the average number of tadpoles (N) hatched from infected spawns (N=0) was compared with that of uninfected spawns (N=354 ± 67).  Three severely infected spawns were brought to the laboratory and the fly larvae were reared until they metamorphosed to adults.  Morphological and molecular identification of the flies confirmed them as belonging to Caiusa testacea Senior-White, 1923 of the family Calliphoridae.  The infected spawns were completely destroyed and an estimated average of 400 P. cruciger eggs per spawn were lost.  The results revealed a high impact of Caiusa testacea on egg and embryo mortality of P. cruciger.


Author(s):  
Thomas A Lewis

Abstract As a discipline, the academic study of religion is strikingly fragmented, with little engagement or shared criteria of excellence across subfields. Although important recent developments have expanded the traditions and peoples studied as well as the methods used, the current extent of fragmentation limits the impact of this diversification and pluralization. At a moment when the global pandemic is catalyzing profound pressures on our universities and disciplines, this fragmentation makes it difficult to articulate to the public, to non-religious studies colleagues, and to students why the study of religion matters. We therefore too often fall back on platitudes. I argue for a revitalized methods and theories conversation that connects us even as it bears our arguments and disagreements about what we do and how. Courses in methods and theories in the study of religion represent the most viable basis we have for bringing the academic study of religion into the common conversation or argument that constitutes a discipline without sacrificing our pluralism.


Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 149
Author(s):  
Karol Leluk ◽  
Stanisław Frąckowiak ◽  
Joanna Ludwiczak ◽  
Tomasz Rydzkowski ◽  
Vijay Kumar Thakur

Recently, biocomposites have emerged as materials of great interest to the scientists and industry around the globe. Among various polymers, polylactic acid (PLA) is a popular matrix material with high potential for advanced applications. Various particulate materials and nanoparticles have been used as the filler in PLA based matrix. One of the extensively studied filler is cellulose. However, cellulose fibres, due to their hydrophilic nature, are difficult to blend with a hydrophobic polymer matrix. This leads to agglomeration and creates voids, reducing the mechanical strength of the resulting composite. Moreover, the role of the various forms of pure cellulose and its particle shape factors has not been analyzed in most of the current literature. Therefore, in this work, materials of various shapes and shape factors were selected as fillers for the production of polymer composites using Polylactic acid as a matrix to fill this knowledge gap. In particular, pure cellulose fibres (three types with different elongation coefficient) and two mineral nanocomponents: precipitated calcium carbonate and montmorillonite were used. The composites were prepared by a melt blending process using two different levels of fillers: 5% and 30%. Then, the analysis of their thermomechanical and physico-chemical properties was carried out. The obtained results were presented graphically and discussed in terms of their shape and degree of filling.


Forests ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 129
Author(s):  
Tamalika Chakraborty ◽  
Albert Reif ◽  
Andreas Matzarakis ◽  
Somidh Saha

European beech (Fagus sylvatica L.) trees are becoming vulnerable to drought, with a warming climate. Existing studies disagree on how radial growth varies in European beech in response to droughts. We aimed to find the impact of multiple droughts on beech trees’ annual radial growth at their ecological drought limit created by soil water availability in the forest. Besides, we quantified the influence of competition and canopy openness on the mean basal area growth of beech trees. We carried out this study in five near-natural temperate forests in three localities of Germany and Switzerland. We quantified available soil water storage capacity (AWC) in plots laid in the transition zone from oak to beech dominated forests. The plots were classified as ‘dry’ (AWC < 60 mL) and ‘less-dry’ (AWC > 60 mL). We performed dendroecological analyses starting from 1951 in continuous and discontinuous series to study the influence of climatic drought (i.e., precipitation-potential evapotranspiration) on the radial growth of beech trees in dry and less-dry plots. We used observed values for this analysis and did not use interpolated values from interpolated historical records in this study. We selected six drought events to study the resistance, recovery, and resilience of beech trees to drought at a discontinuous level. The radial growth was significantly higher in less-dry plots than dry plots. The increase in drought had reduced tree growth. Frequent climatic drought events resulted in more significant correlations, hence, increased the dependency of tree growth on AWC. We showed that the recovery and resilience to climatic drought were higher in trees in less-dry plots than dry plots, but it was the opposite for resistance. The resistance, recovery, and resilience of the trees were heterogeneous between the events of drought. Mean growth of beech trees (basal area increment) were negatively impacted by neighborhood competition and positively influenced by canopy openness. We emphasized that beech trees growing on soil with low AWC are at higher risk of growth decline. We concluded that changes in soil water conditions even at the microsite level could influence beech trees’ growth in their drought limit under the changing climate. Along with drought, neighborhood competition and lack of light can also reduce beech trees’ growth. This study will enrich the state of knowledge about the ongoing debate on the vulnerability of beech trees to drought in Europe.


Sign in / Sign up

Export Citation Format

Share Document