scholarly journals Investigation of Adsorbent Characteristics of Carbonized Low-Density Woods in the Treatment of Textile Effluent

2021 ◽  
Vol 6 (2) ◽  
Author(s):  
Victor O. Fatokun ◽  
Femi K. Owofadeju ◽  
Oluseyi E. Ewemoje ◽  
Temitayo A. Ewemoje
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Carbon ◽  
Wood Species ◽  
Contact Time ◽  
Metal Removal ◽  
Activated Carbons ◽  
Gmelina Arborea ◽  
Aquatic Life ◽  
Cadmium Zinc

Textile industries wastewater contains pollutants which vary greatly and depend on the chemicals and treatment processes used. Toxic heavy metals in wastewater are discharged into the environment, which adversely affect human, aquatic life, and natural water bodies. This study was therefore designed to investigate adsorption of heavy metal ions (Cadmium, Zinc, Manganese, Chromium and iron) in raw textile wastewater using activated carbon from Cordia millenii and Gmelina arborea wood species. Carbon structural pattern was examined using SEM equipment. Batch sorption tests were conducted in wastewater treatment by varying absorbent contact time with the sorbate from 30 to 120minutes (at 30minutes intervals) to facilitate attainment of equilibrium condition. The pore space diameter mean values were 9.28±1.22 and 4.45±1.57µm for Cordia millenii Carbon (CMC) and Gmelina arborea Carbon (GAC) respectively. It was observed that over 80% Manganese removal was achieved at 120minutes contact time for both carbon studied. Highest removal efficiencies was observed at all contact times in GAC for iron while in CMC for Chromium, Cadmium, Zinc and Manganese between 30-90minutes contact time. After 120 minutes contact time, there was insignificant difference in removal efficiency for Chromium and Manganese. However, at 30minutes contact time, percentage removal of over 60% was obtained for Manganese, implying that Manganese has high mobility towards the adsorbents surface. The activated carbons obtained from these two wood species are therefore viable options for heavy metal removal from textile effluents. Keywords— Adsorption, activated carbon, Cordia millenii carbon, Gmelina arborea carbon, heavy metals.

Applications of Nanoparticles in Heavy Metal Removal for Wastewater Treatment at Brahmani River

2020 ◽  
Vol 17 (9) ◽  
pp. 4666-4670
Author(s):  
Himanshu Sekhar Rath ◽  
Mira Das ◽  
Smita Rath ◽  
U. N. Dash ◽  
Alakananda Tripathy
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Activated Carbons ◽  
Low Cost ◽  
Groundwater Resources ◽  
Heavy Metal Removal ◽  
Absorption Capacity ◽  
Current Standard ◽  
River Stretch

The goal of this research is to determine the current standard of water quality along the Brahmani River stretch in terms of physico-chemical parameters. The River Brahmani receives a substantial amount of industrial waste in the identified study area and is witness to a large amount of human and agricultural activities. Nowadays Ninety percent of Brahmani’s required water is secured with groundwater resources and it is essential to forecast pollutant content in those resources. Hence, this research aimed at using of nanoparticles such as Activated Carbons (ACs) for removal of heavy metal such as nickel and zinc in Brahmani river using the Langmuir approach. Adsorption seems to be the most widely used method for heavy metal recovery due to its low cost, easy installation and the presence of alternative adsorbents. In addition, the process of adsorption can also be made in use to recover heavy metal ions from wastewater. Despite these advantages, adsorption is hard to commercialize. Due to the strong absorption capacity, high number of pores and wide, common area, nanoparticles are treated as the effective method in removal of heavy metals in rivers. Comparative analysis shows that seventy-one percent of heavy metals can be removed using the nanotechnology model.

Modeling of heavy metals removal from aqueous solution using activated carbon produced from cotton stalk

2013 ◽  
Vol 67 (7) ◽  
pp. 1612-1619 ◽  
Author(s):  
Mohamed El Zayat ◽  
Edward Smith
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Removal ◽  
Ph Value ◽  
Equilibrium Constants ◽  
Surface Complexation ◽  
Fixed Bed ◽  
Breakthrough Curves ◽  
Carbon Surface

Activated carbon produced from cotton stalks was examined for the removal of heavy metal contaminants. Adsorption studies in completely mixed batch reactors were used to generate equilibrium pH adsorption edges. Continuous flow experiments using the activated carbon in fixed beds were conducted to determine heavy metal breakthrough versus bed volumes treated. At given pH value in the range 5–7, the adsorption capacity was similar for copper and lead and clearly greater than for cadmium. A surface titration experiment indicated negative surface charge of the activated carbon at pH > 6, meaning that electrostatic attraction of the divalent heavy metals can occur below the pH required for precipitation. Substantive metal removal below the pH of zero charge might be due to surface complexation. Accordingly, a surface complexation model approach that utilizes an electrostatic term in the double-layer description was used to estimate equilibrium constants for the protolysis interactions of the activated carbon surface as well as equilibria between background ions used to establish ionic strength and the sorbent surface. Pb(II) adsorption edges were best modeled using inner-layer surface complexation of Pb2+, while Cd(II) and Cu(II) data were best fit by outer-layer complexes with Me2+. The full set of equilibrium constants were used as input in a dual-rate dynamic model to simulate the breakthrough curves of the target metals (Pb, Cu and Cd) from fixed bed experiments and to estimate external (or film) diffusion and internal (surface) diffusion coefficients.

Heavy Metals Leaching of Active Carbon from Sewage Sludge Modified by Chitosan for Dye Wastewater Treatment

2012 ◽  
Vol 627 ◽  
pp. 399-403
Author(s):  
Xiao Dan Fan ◽  
Xiang Kai Zhang
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Wastewater Treatment ◽  
Activated Carbon ◽  
Sewage Sludge ◽  
Contact Time ◽  
Metal Leaching ◽  
Dye Wastewater ◽  
Concentration Increase ◽  
Heavy Metal Leaching

Heavy metal leaching limits activated carbon from sewage sludge (referred as ACS) to be used for wastewater treatment. Cr and Cd leaching from ACS exceed the permitted values. The leaching content of Cr and Cd decrease much with depositing ACS with chitosan (CS),below the permitted values. This is mainly due to the bind of Cr and Cd with the much group –NH2 of CS. The effects of initial dye concentration, pH and contact time had been studied. The dye adsorbed can act as a supple complexion agent with increasing initial dye concentration, increase the affinity for Cr and Cd. For Cd, the amount leaching of CS/ACS or ACS remains content with pH.The amount leaching of Cr decreases when the pH from 1 to 5 and then increases above the pH of 6.0. The contact time has no important influence on the leaching contents of Cr or Cd.

scholarly journals Removal of Heavy Metal Ions from One- and Two-Component Solutions via Adsorption on N-Doped Activated Carbon

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7045
Author(s):  
Justyna Kazmierczak-Razna ◽  
Anetta Zioła-Frankowska ◽  
Piotr Nowicki ◽  
Marcin Frankowski ◽  
Robert Wolski ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Heavy Metal Ions ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Phase Contact ◽  
Phase Contact Time

This paper deals with the adsorption of heavy metal ions (Cu2+ and Zn2+) on the carbonaceous materials obtained by chemical activation and ammoxidation of Polish brown coal. The effects of phase contact time, initial metal ion concentration, solution pH, and temperature, as well as the presence of competitive ions in solution, on the adsorption capacity of activated carbons were examined. It has been shown that the sample modified by introduction of nitrogen functional groups into carbon structure exhibits a greater ability to uptake heavy metals than unmodified activated carbon. It has also been found that the adsorption capacity increases with the increasing initial concentration of the solution and the phase contact time. The maximum adsorption was found at pH = 8.0 for Cu(II) and pH = 6.0 for Zn(II). For all samples, better fit to the experimental data was obtained with a Langmuir isotherm than a Freundlich one. A better fit of the kinetic data was achieved using the pseudo-second order model.

scholarly journals Oil palm empty fruit bunch valorization for activated and non-activated carbon nanoparticles and its heavy-metal-removal efficiency

2021 ◽  
Author(s):  
Salma Zubaidah ◽  
Adisti Permatasari Putri Hartoyo ◽  
Januard Kristian Sihombing ◽  
Elis Nina Herliyana ◽  
Saptadi Darmawan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Carbon ◽  
Oil Palm ◽  
Carbon Nanoparticles ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Activation Process ◽  
Empty Fruit Bunch

Abstract In this study, we examined activated and non-activated carbon nanoparticles (CNPs) derived from oil palm empty fruit bunch (OPEFB) fibers for their nanomaterial characteristics and their potential effectiveness in heavy metal removal. To investigate these properties, transmission electron microscopy, scanning electron microscopy (SEM), EDX, Fourier transform infrared spectroscopy, particle size analysis, X-ray diffraction, and atomic absorption spectrophotometry were employed. This study shows that both the activated and the non-activated CNPs were in the form of well-dispersed and aggregated particles. As analyzed using SEM, the external surfaces of the non-activated CNPs were determined to be irregular, while those of the activated CNPs had a more circular shape without aggregation. Carbon was the most dominant element observed in these CNPs, and the occurrence of its activation process altered the chemical functional groups of the non-activated CNPs by shifting their wavenumbers and intensities. Additionally, the activation process increased the crystallinity domain in the activated CNPs. OPEFB fibers could be valorized to obtain both activated and non-activated CNPs that had the potential efficiency to remove heavy metals, including copper (Cu), lead (Pb), iron (Fe), and zinc (Zn) at certain times. Based on the analysis of the Langmuir and Freundlich models, the activated and non-activated CNPs were found to have shown favorable adsorption to Cu, Pb, and Fe, with a percentage of heavy metal removal of over 84%. The adsorption of heavy metals was carried out via a chemical process.

scholarly journals Recovery of Polluted Urban Stormwater Containing Heavy Metals: Laboratory-Based Experiments with Arlita and Filtralite

Water ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 780
Author(s):  
Concepcion Pla ◽  
David Benavente ◽  
Javier Valdes-Abellan ◽  
Antonio Jodar-Abellan
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Building Materials ◽  
Metal Removal ◽  
Geochemical Modeling ◽  
Heavy Metal Removal ◽  
Exchange Reactions ◽  
Solution Ph ◽  
Road Asphalt ◽  
Aquatic Life

Heavy-metal sources in urban environments include automobile exhaust, fuel combustion, tires, road asphalt, weathering of building materials, and/or industrial activities. The presence of heavy metals in urban stormwaters constitutes a potential risk for water resources and aquatic life. Results from the present study demonstrated the effectiveness of two different lightweight aggregates (LWAs), Arlita and Filtralite, to remove heavy metals (Ni, Cu, Zn, Cd, and Pb) present in aqueous solutions. These materials were selected because they previously showed great results for water treatment and because of their physicochemical properties. The removal efficiency of the studied materials was evaluated with batch tests containing solutions contaminated with heavy metals (with individual and multiple contaminants) at different concentrations mixed with the LWA particles. Filtralite showed a better performance in heavy metal removal than Arlita: higher adsorption capacity for all metals, and lower release of metals from contaminated particles into washing water. The average removal capacities in tests developed with solutions containing individual contaminants for Arlita and Filtralite were 76% and 90%, respectively, although the values varied across the different contaminants. Metal elimination by LWAs was more effective with individual contaminated solutions than with multielemental ones. The analysis of the adsorption curves, the mineral precipitation on the LWA surface, and the geochemical modeling confirmed that two different mechanisms are responsible for the heavy-metal removal. First, the rough surface of the LWA presents sorbing surface sites of the forming minerals, resulting in the ion-exchange reactions of metal ions. Second, the LWA–water interaction causes an increase in solution pH, which triggers the precipitation and coprecipitation of the metals in the form of oxide and hydroxides. The study confirms that the use of Arlita and especially Filtralite present promising potential to remove heavy metals from urban stormwaters.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

scholarly journals Adsorption of Hexavalent Chromium and Divalent Lead Ions on the Nitrogen-Enriched Chitosan-Based Activated Carbon

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1907
Author(s):  
Fatma Hussain Emamy ◽  
Ali Bumajdad ◽  
Jerzy P. Lukaszewicz
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Metal Removal ◽  
High Surface ◽  
Heavy Metal Removal ◽  
High Surface Area ◽  
Kinetics Of Adsorption ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order

Optimizing the physicochemical properties of the chitosan-based activated carbon (Ch-ACs) can greatly enhance its performance toward heavy metal removal from contaminated water. Herein, Ch was converted into a high surface area (1556 m2/g) and porous (0.69 cm3/g) ACs with large content of nitrogen (~16 wt%) using K2CO3 activator and urea as nitrogen-enrichment agents. The prepared Ch-ACs were tested for the removal of Cr(VI) and Pb(II) at different pH, initial metal ions concentration, time, activated carbon dosage, and temperature. For Cr(VI), the best removal was at pH = 2, while for Pb(II) the best pH for its removal was in the range of 4–6. At 25 °C, the Temkin model gives the best fit for the adsorption of Cr(VI), while the Langmuir model was found to be better for Pb(II) ions. The kinetics of adsorption of both heavy metal ions were found to be well-fitted by a pseudo-second-order model. The findings show that the efficiency and the green properties (availability, recyclability, and cost effectiveness) of the developed adsorbent made it a good candidate for wastewaters treatment. As preliminary work, the prepared sorbent was also tested regarding the removal of heavy metals and other contaminations from real wastewater and the obtained results were found to be promising.

A Review on Current Development of Animal Bone-Based Sorbent for Heavy Metals Removal from Contaminated Water and Wastewater

2021 ◽  
Vol 897 ◽  
pp. 109-115
Author(s):  
Sri Martini ◽  
Kiagus Ahmad Roni ◽  
Dian Kharismadewi ◽  
Erna Yuliwaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Inorganic Compounds ◽  
Heavy Metal Removal ◽  
Influential Factors ◽  
Contaminated Water ◽  
Animal Bone ◽  
Water And Wastewater ◽  
Cow Bone

This review article presents the usage of various animal bones such as chicken bone, fish bone, pig bone, camel bone, and cow bone as reliable biosorbent materials to remove heavy metals contained in contaminated water and wastewater. The sources and toxicity effects of heavy metal ions are also discussed properly. Then specific insights related to adsorption process and its influential factors along with the proven potentiality of selected biosorbents especially derived from animal bone are also explained. As the biosorbents are rich in particular organic and inorganic compounds and functional groups in nature, they play an important role in heavy metal removal from contaminated solutions. Overall, after conducting study reports on the literature, a brief conclusion can be drawn that animal bone waste has satisfactory efficacy as effective, efficient, and environmentally friendly sorbent material.

Removal of Cu, Fe, and Zn from Peat Water by Using Activated Carbon Derived from Oil Palm Leaves

2021 ◽  
Vol 1162 ◽  
pp. 65-73
Author(s):  
Rakhmawati Farma ◽  
Ona Lestari ◽  
Erman Taer ◽  
Apriwandi ◽  
Minarni ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Oil Palm ◽  
Activated Carbons ◽  
Nitrogen Adsorption ◽  
Surface Characteristics ◽  
Batch Adsorption ◽  
X Ray ◽  
Turbidity Level ◽  
Adsorption Desorption

Heavy metal such as Cu, Fe, and Zn are the most serious contributers to environmental problems. The removal of heavy metal from the environment is the research interest nowdays. The adsorption of Cu, Fe and Zn from wastewater was investigated with various activated carbons as adsorbents. The activated carbons were produced from oil palm leaves by using multi-activation methods. The H3PO4, NaOH, ZnCl2 and KOH were chosen as chemical activating agents. Batch adsorption experiment was used to test the ability of activated carbon to remove Cu, Fe, and Zn from wastewater. The surface characteristics of activated carbon were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption isotherms. The Activated carbons were able to purify wastewater with a maximum turbidity level of 2.83 NTU. The AC-H3PO4 activated carbon showed the highest absorbability of Cu metal as 91.540%, while the highest absorbabilities of Zn and Fe metals were indicated by AC-KOH activated carbon of 22.853% and 82.244% absorption respectively. Therefore, these results enable the oil palm leaves to become a high potential for activated carbon as removal the heavy metals.

Sign in / Sign up

Export Citation Format

Share Document