scholarly journals Geochemical and microstructural characterisation of two species of cool-water bivalves (<i>Fulvia tenuicostata</i> and <i>Soletellina biradiata</i>) from Western Australia

2017 ◽  
Vol 14 (6) ◽  
pp. 1721-1737 ◽  
Author(s):  
Liza M. Roger ◽  
Annette D. George ◽  
Jeremy Shaw ◽  
Robert D. Hart ◽  
Malcolm Roberts ◽  
...  
Keyword(s):  
Western Australia ◽  
Inductively Coupled Plasma ◽  
Organic Matrix ◽  
Analysis Data ◽  
Xrd Analysis ◽  
Crystallographic Structure ◽  
Marine Bivalve ◽  
Ionic Substitution ◽  
Species Specific ◽  
Bivalve Shells

Abstract. The shells of two marine bivalve species (Fulvia tenuicostata and Soletellina biradiata) endemic to south Western Australia have been characterised using a combined crystallographic, spectroscopic and geochemical approach. Both species have been described previously as purely aragonitic; however, this study identified the presence of three phases, namely aragonite, calcite and Mg-calcite, using XRD analysis. Data obtained via confocal Raman spectroscopy, electron probe microanalysis and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) show correlations between Mg ∕ S and Mg ∕ P in F. tenuicostata and between Sr ∕ S and S ∕ Ba in S. biradiata. The composition of the organic macromolecules that constitute the shell organic matrix (i.e. the soluble phosphorus-dominated and/or insoluble sulfur-dominated fraction) influences the incorporation of Mg, Sr and Ba into the crystal lattice. Ionic substitution, particularly Ca2+ by Mg2+ in calcite in F. tenuicostata, appears to have been promoted by the combination of both S- and P-dominated organic macromolecules. The elemental composition of these two marine bivalve shells is species specific and influenced by many factors, such as crystallographic structure, organic macromolecule composition and environmental setting. In order to reliably use bivalve shells as proxies for paleoenvironmental reconstructions, both the organic and inorganic crystalline material need to be characterised to account for all influencing factors and accurately describe the vital effect.

scholarly journals Geochemical and microstructural characterisation of two species of cool-water bivalves (<i>Fulvia tenuicostata</i> and <i>Soletellina biradiata</i>) from Western Australia

2017 ◽  
Author(s):  
Liza M. Roger ◽  
Annette D. George ◽  
Jeremy Shaw ◽  
Robert D. Hart ◽  
Malcolm Roberts ◽  
...  
Keyword(s):  
Western Australia ◽  
Inductively Coupled Plasma ◽  
Organic Matrix ◽  
Analysis Data ◽  
Xrd Analysis ◽  
Crystallographic Structure ◽  
Marine Bivalve ◽  
Ionic Substitution ◽  
Species Specific ◽  
Bivalve Shells

Abstract. The shells of two marine bivalve species (Fulvia tenuicostata and Soletellina biradiata), endemic to south Western Australia, have been characterised using a combined crystallographic, spectroscopic and geochemical approach. Both species have been described previously as purely aragonitic, however, this study identified the presence of three phases, namely aragonite, calcite and Mg-calcite using XRD analysis. Data obtained via confocal Raman spectroscopy, electron probe microanalysis, and laser ablation inductively coupled plasma-mass spectrometry (LA ICP-MS) show correlations between Mg/S and Mg/P in F. tenuicostata, and Sr/S and S/Ba in S. biradiata. The composition of organic macromolecules that constitute the shell organic matrix (i.e. soluble phosphorus-dominated and/or insoluble sulphur-dominated fraction) influences the incorporation of Mg, Sr and Ba into the crystal lattice. Ionic substitution, particularly Ca2+ by Mg2+ in calcite in F. tenuicostata, appears to have been promoted by the combination of both S- and P-dominated organic macromolecules. The elemental composition of these two marine bivalve shells is species-specific and is influenced by many factors such as crystallographic structure, organic macromolecule composition and environmental setting. In order to reliably use bivalve shells as proxies for paleoenvironmental reconstructions, both the organic and inorganic crystalline material need to be characterised to account for all influencing factors and accurately describe the "vital effect".

scholarly journals Jaws of Platynereis dumerilii: Miniature Biogenic Structures with Hardness Properties Similar to Those of Crystalline Metals

JOM ◽  
2021 ◽  
Author(s):  
Luis Zelaya-Lainez ◽  
Giuseppe Balduzzi ◽  
Olaf Lahayne ◽  
Kyojiro N. Ikeda ◽  
Florian Raible ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Indentation Depth ◽  
Organic Matrix ◽  
Structure Property ◽  
Structural Protein ◽  
Inductively Coupled ◽  
Property Relations ◽  
Biogenic Structures ◽  
Platynereis Dumerilii ◽  
Bristle Worms

AbstractNanoindentation, laser ablation inductively coupled plasma mass spectroscopy and weighing ion-spiked organic matrix standards revealed structure-property relations in the microscopic jaw structures of a cosmopolitan bristle worm, Platynereis dumerilii. Hardness and elasticity values in the jaws’ tip region, exceeding those in the center region, can be traced back to more metal and halogen ions built into the structural protein matrix. Still, structure size appears as an even more relevant factor governing the hardness values measured on bristle worm jaws across the genera Platynereis, Glycera and Nereis. The square of the hardness scales with the inverse of the indentation depth, indicating a Nix-Gao size effect as known for crystalline metals. The limit hardness for the indentation depth going to infinity, amounting to 0.53 GPa, appears to be an invariant material property of the ion-spiked structural proteins likely used by all types of bristle worms. Such a metal-like biogenic material is a major source of bio-inspiration.

Analysis of the Samples of Fe-Cu-Nb-Si-B Amorphous Alloys Obtained by Dynamic Compacting Method

2005 ◽  
Vol 903 ◽  
Author(s):  
Victor A. Golubev ◽  
Andrey V. Strikanov ◽  
Grigory A. Potemkin ◽  
Ludmila V. Zueva ◽  
Aleksey V. Golubev ◽  
...  
Keyword(s):  
Shock Wave ◽  
Amorphous Alloys ◽  
Analysis Data ◽  
Xrd Analysis ◽  
Soft Magnetic ◽  
Scanning Calorimetry ◽  
Soft Magnetic Alloys ◽  
Nano Crystalline ◽  
The Impact ◽  
Magnetic Conductivity

AbstractThe Dynamic Compacting (DC) method is promising method to produce considerable-size nonporous wares. The phenomenon is based on the impact of shock wave on the initial powders of amorphous alloys. Every time when the shock wave propagates through the bulk of substance then the temperature rises substantially. Therefore there is a need of study of the DC’s effect on the structure and properties of the amorphous alloys. The results of the thermal analysis (in particular, Differential Scanning Calorimetry) of the samples of the soft magnetic alloys are presented in the report. These results concern with amorphous alloys of 5BDSR, GM414, 10NSR trademarks before DC and after DC, respectively. It is shown there is single low-temperature endothermic peak (near 300C) and there are several high temperature exothermic peaks (near 540C, 650C, and 700C). The first peak is related to glass-transition, the following peaks are related to formation of nano-crystalline phases. It was proved by XRD analysis data. The optimal regimes of the thermal processing of final wares were chosen on the base of thermal- and XRD-analysis. The study of the effects of these regimes on the properties (magnetic conductivity, specific losses etc.) of the circular magnetic conductors was executed. In particular, thermal- as well as thermo-magnetic processing of magnetic conductors based on 5BDSR amorphous alloy (after DC) essentially improves their magnetic properties. For example, magnetic conductivity fÝ increases approximately by factor 17 with respect to the magnitude before DC.

The Characteristic Evaluation of Hydroxyapatite Powders Synthesized from CaCO3 Refined from Oyster Shell and H3PO4

2006 ◽  
Vol 118 ◽  
pp. 639-644
Author(s):  
Hye Sung Kim ◽  
Su Chak Ryu
Keyword(s):  
Bone Density ◽  
Inductively Coupled Plasma ◽  
Oyster Shell ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Infra Red ◽  
Ft Ir

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp) powders is synthesized using the mixed powders of CaCO3 refined from oyster shells and phosphoric acid (H3PO4-98%, Daejung) as starting materials. The characteristic evaluation and chemical analysis of the synthesized powders is performed by X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FT-IR), and inductively-coupled plasma atomic emission spectroscopy (ICPAES). XRD analysis of synthetic powder by heat treatment at 1300°C for 2hrs shows only HAp peaks corresponding to stoichiometric HAp. It is confirmed by ICP-AES test that impurities such as Zn, In, Ti, Ba, Cd, Pb, and Mn, is not detected at all, but small amounts of Ti and Be is observed (0.099ppm Ti and 0.002ppm Ba). Variation of bone density is measured by giving medication of HAp powder with drinking water into human body continuously for three month. After the medication, the bone density is higher than the medication before. This means that HAp powder made from this process can be used as improver of bone density.

scholarly journals Pharmaceutical Standardization and Physicochemical Characterization of Traditional Ayurvedic Marine Drug: Incinerated Conch Shell (Shankha Bhasma)

Marine Drugs ◽  
2018 ◽  
Vol 16 (11) ◽  
pp. 450
Author(s):  
Sandeep Chavan ◽  
Sonali Tayade ◽  
Vidya Gupta ◽  
Vineeta Deshmukh ◽  
Sadanand Sardeshmukh
Keyword(s):  
Inductively Coupled Plasma ◽  
Aloe Vera ◽  
Physicochemical Characterization ◽  
Optical Emission ◽  
Organic Matrix ◽  
Emission Spectrometry ◽  
Inductively Coupled ◽  
Chemical Characters ◽  
Analytical Tools ◽  
Physical And Chemical

Natural resources such as plants, animals and minerals have always been used by mankind to develop drugs and marine world is no exception. Marine by-products like conches, pearls, mother of pearl shells, corals and so forth have been used by traditional Ayurvedic practitioners for centuries. The unique methods of these preparations are scientifically designed to eliminate unwanted impurities and convert them into bioavailable form. In this study, Conch (Xanchus pyrum) was used as a marine resource of calcium carbonate and was converted pharmaceutically from its aragonite form to calcite. All the steps of preparations and changes in the properties therein were documented and validated. Further, traditional as well as modern analytical tools were used to study its physical and chemical characters to develop a monograph. The physical characterization included particle size, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA) and Fourier Transform Infra-red (FTIR). Metal composition and heavy metal limits were determined using Inductively Coupled Plasma Optical Emission Spectrometry (ICPOES). This study revealed the rearrangement of aragonite crystals into calcite form by grinding, trituration with aloe vera juice and incineration under controlled conditions. Moreover, the finished product was found to be devoid of organic matrix that is nacre. This study creates a foundation for the development of a master formula for commonly used Shankha Bhasma in Ayurvedic medicines.

Wear Studies of Al2O3-ZrO2∙5CaO Composite Coatings for Tribological Applications

2018 ◽  
Vol 7 (3.4) ◽  
pp. 73
Author(s):  
Abhinav . ◽  
N Krishnamurthy ◽  
Ranjana Jain
Keyword(s):  
Composite Coatings ◽  
Spray Coating ◽  
High Hardness ◽  
Xrd Analysis ◽  
Atmospheric Plasma ◽  
Crystallographic Structure ◽  
The Coefficient Of Friction ◽  
Sem Micrograph ◽  
Composite Mixture ◽  
Pin On Disk

A composite mixture of Metco 105 SFP, 99.9% Al2O3 and Metco 201 NS, ZrO2.5CaO were blended in the pursuit of high hardness and improved wear resistance characteristics for tribological applications. In this context a composite mixture of alumina and calcia stabilized zirconia in 50:50 by wt. % proportion was developed, and applied over Al-6061 substrates. Atmospheric plasma spray coating technique was used to develop the coating systems. The ASTM G132 standard, a pin-on-disk tribometer was used to determine the specific wear rate at different normal loads of 5 N, 10 N and 15 N. Experimental results revealed that the top coat primarily subjected to sliding and localized abrasion and also confirmed with SEM micrograph. Sliding has mainly occurs in the plane of <111>, <200>, <220>, <311>, <222> found in the XRD analysis. Irrespective of the applied normal loads the coefficient of friction doesn’t influences much in the abrasive wear studies. However, wear mechanism was found to primarily dependent on the phases and on the crystallographic structure of the material used.  

scholarly journals Physicochemical Characterization of the Pristine E171 Food Additive by Standardized and Validated Methods

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 592 ◽  
Author(s):  
Eveline Verleysen ◽  
Nadia Waegeneers ◽  
Frédéric Brassinne ◽  
Sandra De Vos ◽  
Isaac Ojea Jimenez ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Particle Size ◽  
Sample Preparation ◽  
Inductively Coupled Plasma ◽  
Physicochemical Characterization ◽  
Intestinal Barrier ◽  
Food Additive ◽  
Crystallographic Structure ◽  
The European Union ◽  
Representative Samples

E171 (titanium dioxide) is a food additive that has been authorized for use as a food colorant in the European Union. The application of E171 in food has become an issue of debate, since there are indications that it may alter the intestinal barrier. This work applied standardized and validated methodologies to characterize representative samples of 15 pristine E171 materials based on transmission electron microscopy (TEM) and single-particle inductively coupled plasma mass spectrometry (spICP-MS). The evaluation of selected sample preparation protocols allowed identifying and optimizing the critical factors that determine the measurement of the particle size distribution by TEM. By combining optimized sample preparation with method validation, a significant variation in the particle size and shape distributions, the crystallographic structure (rutile versus anatase), and the physicochemical form (pearlescent pigments versus anatase and rutile E171) was demonstrated among the representative samples. These results are important for risk assessment of the E171 food additive and can contribute to the implementation of the European Food Safety Authority (EFSA) guidance on risk assessment of the application of nanoscience and nanotechnologies in the food and feed chain.

scholarly journals Oil-based mud waste reclamation and utilisation in low-density polyethylene composites

2020 ◽  
Vol 38 (12) ◽  
pp. 1331-1344
Author(s):  
Shohel Siddique ◽  
Kyari Yates ◽  
Kerr Matthews ◽  
Laszlo J Csetenyi ◽  
James Njuguna
Keyword(s):  
Inductively Coupled Plasma ◽  
Oil And Gas ◽  
Microscopic Analysis ◽  
Optical Emission ◽  
Fluorescence Analysis ◽  
Xrd Analysis ◽  
Low Density Polyethylene ◽  
Emission Spectrometry ◽  
Low Density ◽  
X Ray

Oil-based mud (OBM) waste from the oil and gas exploration industry can be valorised to tailor-made reclaimed clay-reinforced low-density polyethylene (LDPE) nanocomposites. This study aims to fill the information gap in the literature and to provide opportunities to explore the effective recovery and recycling techniques of the resources present in the OBM waste stream. Elemental analysis using inductively coupled plasma–optical emission spectrometry (ICP-OES) and X-ray fluorescence analysis, chemical structural analysis by Fourier transform infrared (FTIR) spectroscopy, and morphological analysis of LDPE/organo-modified montmorillonite (LDPE/MMT) and LDPE/OBM slurry nanocomposites by scanning electron microscopy (SEM) have been conducted. Further analysis including calorimetry, thermogravimetry, spectroscopy, microscopy, energy dispersive X-ray analysis and X-ray diffraction (XRD) was carried out to evaluate the thermo-chemical characteristics of OBM waste and OBM clay-reinforced LDPE nanocomposites, confirming the presence of different clay minerals including inorganic salts in OBM slurry powder. The microscopic analysis revealed that the distance between polymer matrix and OBM slurry filler is less than that of MMT, which suggests better interfacial adhesion of OBM slurry compared with the adhesion between MMT and LDPE matrix. This was also confirmed by XRD analysis, which showed the superior delamination structure OBM slurry compared with the structure of MMT. There is a trend noticeable for both of these fillers that the nanocomposites with higher percentage filler contents (7.5 and 10.0 wt% in this case) were indicated to act as a thermal conductive material. The heat capacity values of nanocomposites decreased about 33% in LDPE with 7.5 wt% MMT and about 17% in LDPE with 10.0 wt% OBM slurry. It was also noted, for both nanocomposites, that the residue remaining after 1000°C increases with the incremental wt% of fillers in the nanocomposites. There is a big difference in residue amount (in %) left after thermogravimetric analysis in the two nanocomposites, indicating that OBM slurry may have significant influence in decomposing LDPE matrix; this might be an interesting area to explore in the future. The results provide insight and opportunity to manufacture waste-derived renewable nanocomposites with enhanced structural and thermal properties.

Sign in / Sign up

Export Citation Format

Share Document