scholarly journals Threshold temperature and cumulative energy requirement for the development of cutworm, Agrotis ipsilon Hufnagel

2021 ◽  
Vol 23 (2) ◽  
pp. 260-263
Author(s):  
K. S. VERMA ◽  
MANISHKUMAR J. JOSHI ◽  
R. S. CHANDEL
Keyword(s):  
Energy Requirement ◽  
Agrotis Ipsilon ◽  
Threshold Temperature ◽  
Cumulative Energy

scholarly journals Environmental and cost benefits of co-digesting food waste at wastewater treatment facilities

2020 ◽  
Author(s):  
Ben Morelli ◽  
Sarah Cashman ◽  
Xin (Cissy) Ma ◽  
Jason Turgeon ◽  
Sam Arden ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Life Cycle Cost ◽  
Water Reuse ◽  
Energy Demand ◽  
Energy Requirement ◽  
Baseline Scenario ◽  
Cumulative Energy ◽  
Cumulative Energy Demand

Abstract The wastewater industry is undergoing a paradigm shift from focusing solely on treatment to incorporating concepts aimed at mitigating environmental impacts such as energy and nutrient recovery and water reuse. This study uses life cycle assessment and life cycle cost analysis to investigate the effect of expanding anaerobic digestion (AD) capacity and adding combined heat and power on environmental and cost indicators at a mid-sized wastewater treatment facility (WWTF) in Massachusetts, USA. Since 2014, Massachusetts has banned the disposal of organic waste from commercial organizations producing more than one ton of material per week. The WWTF's additional digester capacity allows the co-digestion of municipal solids with a food-based engineered bioslurry due to this ban. Study data were compiled for several AD feedstock quantity and performance scenarios, and compared to a baseline scenario representative of historic plant operations prior to co-digestion. Reductions in environmental impact are demonstrated for six of eight environmental impacts, including global climate change potential and cumulative energy demand. Eutrophication potential increases by 10 percent and 24 percent across assessed scenarios. Water use remains relatively constant across scenarios. Facility energy production increases dramatically with co-digestion, satisfying 100 percent of the WWTF's thermal energy requirement and producing surplus electricity assuming full AD capacity utilization.

Energetic relationships for crushing of soil clods

2006 ◽  
Vol 2 (1) ◽  
pp. 51-72
Author(s):  
István Patay ◽  
Virág Sándor
Keyword(s):  
Moisture Content ◽  
Specific Energy ◽  
Soil Moisture Content ◽  
Energy Requirement ◽  
Clay Content ◽  
Clay Soils ◽  
Rigid Support ◽  
Soil Plasticity ◽  
Specific Energy Requirement ◽  
The Relationship

Clod crushing is a principal problem with soils of high clay content. Therefore, there is a need for determining the conditions for clod breaking and clod crushing. The objective of the work was to develop a special purpose tool for single clod breaking both by rigid support of the clod and by a single clod supported by soil and to develop a machine for clod crushing. Furthermore, the purpose was to determine the relationship between the specific energy requirement for clod crushing in the function of soil plasticity and the soil moisture content by the means of the developed tool and machine. The main result of the experiments is summarized in a 3D diagram where the specific energy requirement for soil clod crushing is given in the function of the moisture content and the plasticity index for different clay soils.

Electrolysis of Wastewater - A Laboratory Study

1975 ◽  
Vol 10 (1) ◽  
pp. 214-223
Author(s):  
N.S. Wei ◽  
G.W. Heinke
Keyword(s):  
Energy Source ◽  
Mathematical Model ◽  
Stainless Steel ◽  
Charge Density ◽  
Energy Requirement ◽  
Phosphate Removal ◽  
Septic Tank ◽  
Metallic Ions ◽  
Treatment Unit ◽  
Consumable Electrodes

Abstract This paper presents bench scale experimental results on the electrolysis of raw domestic wastewater. Studies carried out with consumable electrodes are discussed. A mathematical model of a small electrolytic sewage treatment unit for individual household application is developed. The energy consumption and cost of such a device are discussed. Electrolysis can be described as a process in which chemical reactions are induced at each electro-liquid interface by applying an external electrical energy source to a system of electrodes immersed in a liquid. This paper deals only with electrolysis where a direct current power supply is used as the energy source. The process is governed by Faraday' s two laws on electrochemistry. The fundamental process parameter is the electrical charge density, measured as coulombs per litre (c/1) of wastewater treated. There are two basic types of electrolysis depending on the choice of anode material. When the anode is made of dissolvable metallic material such as iron, stainless steel and aluminum, the metal dissolves and goes into the sewage as metallic ions and forms hydrated metallic oxides which act as flocculating agents. The amount of metal dissolved is proportional to the quantity of electrical charges supplied to the system. Results from a series of batch experiments showed that electrolysis with consumable electrodes is capable of removing significant amounts of organic pollutants. Total organic carbon (TOC) removal was found to be a function of charge density. Phosphate removal efficiency of 90 percent or higher was achieved at a relatively low charge density of 240 coulombs per litre with either iron or stainless steel anodes. A mathematical model was derived in the conceptual design of a household electrolytic treatment unit. The model incorporates variables such as decomposition voltage of the electrodes and electrical conductivity of the wastewater as well as the physical configuration of the electrolytic cell. The energy requirement of such a unit can be calculated from the model. It is suggested in this paper that an electrolytic waste treatment unit could be an alternative to the septic tank and tile bed system in areas where the latter is not applicable due to poor soil and terrain conditions.

Insights into Potent Therapeutical Antileukemic Agent L-glutaminase Enzyme Under Solid-state Fermentation: A Review

2020 ◽  
Vol 21 (3) ◽  
pp. 211-220 ◽  
Author(s):  
Chandrasai Potla Durthi ◽  
Madhuri Pola ◽  
Satish Babu Rajulapati ◽  
Anand Kishore Kola
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Food Industry ◽  
Energy Requirement ◽  
Production Studies ◽  
Wide Range ◽  
Hybridoma Technology ◽  
Bacteria And Fungi ◽  
The Stability ◽  
Glutaminase Activity

Aim & objective: To review the applications and production studies of reported antileukemic drug L-glutaminase under Solid-state Fermentation (SSF). Overview: An amidohydrolase that gained economic importance because of its wide range of applications in the pharmaceutical industry, as well as the food industry, is L-glutaminase. The medical applications utilized it as an anti-tumor agent as well as an antiretroviral agent. L-glutaminase is employed in the food industry as an acrylamide degradation agent, as a flavor enhancer and for the synthesis of theanine. Another application includes its use in hybridoma technology as a biosensing agent. Because of its diverse applications, scientists are now focusing on enhancing the production and optimization of L-glutaminase from various sources by both Solid-state Fermentation (SSF) and submerged fermentation studies. Of both types of fermentation processes, SSF has gained importance because of its minimal cost and energy requirement. L-glutaminase can be produced by SSF from both bacteria and fungi. Single-factor studies, as well as multi-level optimization studies, were employed to enhance L-glutaminase production. It was concluded that L-glutaminase activity achieved by SSF was 1690 U/g using wheat bran and Bengal gram husk by applying feed-forward artificial neural network and genetic algorithm. The highest L-glutaminase activity achieved under SSF was 3300 U/gds from Bacillus sp., by mixture design. Purification and kinetics studies were also reported to find the molecular weight as well as the stability of L-glutaminase. Conclusion: The current review is focused on the production of L-glutaminase by SSF from both bacteria and fungi. It was concluded from reported literature that optimization studies enhanced L-glutaminase production. Researchers have also confirmed antileukemic and anti-tumor properties of the purified L-glutaminase on various cell lines.

scholarly journals Green synthesis: Proposed mechanism and factors influencing the synthesis of platinum nanoparticles

2020 ◽  
Vol 9 (1) ◽  
pp. 386-398 ◽  
Author(s):  
Mahmood S. Jameel ◽  
Azlan Abdul Aziz ◽  
Mohammed Ali Dheyab
Keyword(s):  
Green Synthesis ◽  
Reaction Temperature ◽  
Platinum Nanoparticles ◽  
Energy Requirement ◽  
Average Particle Size ◽  
High Energy ◽  
Energy Utilization ◽  
Critical Parameters ◽  
Synthesis Process ◽  
Average Particle

AbstractPlatinum nanoparticles (Pt NPs) have attracted interest in catalysis and biomedical applications due to their unique structural, optical, and catalytic properties. However, the conventional synthesis of Pt NPs using the chemical and physical methods is constrained by the use of harmful and costly chemicals, intricate preparation requirement, and high energy utilization. Hence, this review emphasizes on the green synthesis of Pt NPs using plant extracts as an alternative approach due to its simplicity, convenience, inexpensiveness, easy scalability, low energy requirement, environmental friendliness, and minimum usage of hazardous materials and maximized efficiency of the synthesis process. The underlying complex processes that cover the green synthesis (biosynthesis) of Pt NPs were reviewed. This review affirms the effects of different critical parameters (pH, reaction temperature, reaction time, and biomass dosage) on the size and shape of the synthesized Pt NPs. For instance, the average particle size of Pt NPs was reported to decrease with increasing pH, reaction temperature, and concentration of plant extract.

scholarly journals Multi-Objective Energy Management and Charging Strategy for Electric Bus Fleets in Cities Using Various ECO Strategies

2021 ◽  
Vol 13 (14) ◽  
pp. 7865
Author(s):  
Mohammed Mahedi Hasan ◽  
Nikos Avramis ◽  
Mikaela Ranta ◽  
Andoni Saez-de-Ibarra ◽  
Mohamed El Baghdadi ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Thermal Management ◽  
Energy Management ◽  
Management Strategy ◽  
Energy Requirement ◽  
Optimization Technique ◽  
Total Cost ◽  
Multi Objective ◽  
Battery Capacity ◽  
Eco Features

The paper presents use case simulations of fleets of electric buses in two cities in Europe, one with a warm Mediterranean climate and the other with a Northern European (cool temperate) climate, to compare the different climatic effects of the thermal management strategy and charging management strategy. Two bus routes are selected in each city, and the effects of their speed, elevation, and passenger profiles on the energy and thermal management strategy of vehicles are evaluated. A multi-objective optimization technique, the improved Simple Optimization technique, and a “brute-force” Monte Carlo technique were employed to determine the optimal number of chargers and charging power to minimize the total cost of operation of the fleet and the impact on the grid, while ensuring that all the buses in the fleet are able to realize their trips throughout the day and keeping the battery SoC within the constraints designated by the manufacturer. A mix of four different types of buses with different battery capacities and electric motor specifications constitute the bus fleet, and the effects that they have on charging priority are evaluated. Finally, different energy management strategies, including economy (ECO) features, such as ECO-comfort, ECO-driving, and ECO-charging, and their effects on the overall optimization are investigated. The single bus results indicate that 12 m buses have a significant battery capacity, allowing for multiple trips within their designated routes, while 18 m buses only have the battery capacity to allow for one or two trips. The fleet results for Barcelona city indicate an energy requirement of 4.42 GWh per year for a fleet of 36 buses, while for Gothenburg, the energy requirement is 5 GWh per year for a fleet of 20 buses. The higher energy requirement in Gothenburg can be attributed to the higher average velocities of the bus routes in Gothenburg, compared to those of the bus routes in Barcelona city. However, applying ECO-features can reduce the energy consumption by 15% in Barcelona city and by 40% in Gothenburg. The significant reduction in Gothenburg is due to the more effective application of the ECO-driving and ECO-charging strategies. The application of ECO-charging also reduces the average grid load by more than 10%, while shifting the charging towards non-peak hours. Finally, the optimization process results in a reduction of the total fleet energy consumption of up to 30% in Barcelona city, while in Gothenburg, the total cost of ownership of the fleet is reduced by 9%.

scholarly journals Sublethal Exposure Effects of the Neonicotinoid Clothianidin Strongly Modify the Brain Transcriptome and Proteome in the Male Moth Agrotis ipsilon

Insects ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 152
Author(s):  
Camille Meslin ◽  
Françoise Bozzolan ◽  
Virginie Braman ◽  
Solenne Chardonnet ◽  
Cédric Pionneau ◽  
...  
Keyword(s):  
Sex Pheromone ◽  
Molecular Mechanisms ◽  
Insect Pest ◽  
Agrotis Ipsilon ◽  
Positive Effects ◽  
Male Moth ◽  
Hormetic Effect ◽  
Pest Insects ◽  
Neuronal Processes ◽  
The Brain

Insect pest management relies mainly on neurotoxic insecticides, including neonicotinoids such as clothianidin. The residual accumulation of low concentrations of these insecticides can have positive effects on target pest insects by enhancing various life traits. Because pest insects often rely on sex pheromones for reproduction and olfactory synaptic transmission is cholinergic, neonicotinoid residues could indeed modify chemical communication. We recently showed that treatments with low doses of clothianidin could induce hormetic effects on behavioral and neuronal sex pheromone responses in the male moth, Agrotis ipsilon. In this study, we used high-throughput RNAseq and proteomic analyses from brains of A. ipsilon males that were intoxicated with a low dose of clothianidin to investigate the molecular mechanisms leading to the observed hormetic effect. Our results showed that clothianidin induced significant changes in transcript levels and protein quantity in the brain of treated moths: 1229 genes and 49 proteins were differentially expressed upon clothianidin exposure. In particular, our analyses highlighted a regulation in numerous enzymes as a possible detoxification response to the insecticide and also numerous changes in neuronal processes, which could act as a form of acclimatization to the insecticide-contaminated environment, both leading to enhanced neuronal and behavioral responses to sex pheromone.

scholarly journals High Pressure X-ray Diffraction as a Tool for Designing Doped Ceria Thin Films Electrolytes

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 724
Author(s):  
Sara Massardo ◽  
Alessandro Cingolani ◽  
Cristina Artini
Keyword(s):  
Thin Films ◽  
High Pressure ◽  
Rare Earth ◽  
Ionic Conductivity ◽  
Bulk Material ◽  
Threshold Temperature ◽  
Doped Ceria ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rare Earth Doped

Rare earth-doped ceria thin films are currently thoroughly studied to be used in miniaturized solid oxide cells, memristive devices and gas sensors. The employment in such different application fields derives from the most remarkable property of this material, namely ionic conductivity, occurring through the mobility of oxygen ions above a certain threshold temperature. This feature is in turn limited by the association of defects, which hinders the movement of ions through the lattice. In addition to these issues, ionic conductivity in thin films is dominated by the presence of the film/substrate interface, where a strain can arise as a consequence of lattice mismatch. A tensile strain, in particular, when not released through the occurrence of dislocations, enhances ionic conduction through the reduction of activation energy. Within this complex framework, high pressure X-ray diffraction investigations performed on the bulk material are of great help in estimating the bulk modulus of the material, and hence its compressibility, namely its tolerance toward the application of a compressive/tensile stress. In this review, an overview is given about the correlation between structure and transport properties in rare earth-doped ceria films, and the role of high pressure X-ray diffraction studies in the selection of the most proper compositions for the design of thin films.

Sign in / Sign up

Export Citation Format

Share Document