scholarly journals Application of calcium oxide as heterogeneous catalyst for ethylic transesterification of residual frying soybean oil

2020 ◽  
Vol 24 ◽  
pp. e12
Author(s):  
Djonathan Luiz Giordani Lenz ◽  
Pedro Vinnicius Caitano Guimarães ◽  
Liziara Da Costa Cabrera ◽  
Jonas Simon Dugatto ◽  
Bruno München Wenzel
Keyword(s):  
Heterogeneous Catalysts ◽  
Batch Reactor ◽  
Low Cost ◽  
Frying Oil ◽  
Raw Material ◽  
Molar Ratio ◽  
Operational Parameters ◽  
Significance Level ◽  
Animal Fats ◽  
Pre Treatment

Biodiesel can be produced through the transesterification reaction of a short-chain alcohol with a triacylglycerol, that can be obtained from vegetable oils or animal fats, in the presence of a catalyst. The use of ethanol as reactant is justified since its production is consolidated in Brazil. Among the heterogeneous catalysts, CaO shows potential in the transesterification reactions because it has a low cost, can be reused and is not corrosive. The recycling of frying oil for the production of biodiesel represents an alternative for the disposal of a waste and does not compete with the food industry. The residual oil and CaO were subjected to a pre-treatment before the transesterification reactions. A Box-Behnken experimental design was applied with 3 factors: temperature, ethanol:oil molar ratio and reaction time. The reactions were carried out in a batch reactor, in which oil, ethanol and the catalyst were added. The samples were vacuum filtered and conducted to a rotary evaporator, in order to remove excess ethanol. The resulting mixture was centrifuged and, subsequently, a sample was collected from the supernatant phase. The yield was determined by a mass balance based in the concentrations of acylglycerols, that were determined through an HPLC-UV methodology. A second-order linear regression model was built and validated through statistic tests with a 5% significance level. The optimized operational parameters are 15:1 ethanol:oil molar ratio, 81.2 ºC e 6 h of reaction. From the obtained results it can be inferred that it is feasible to use residual frying oil as raw material, ethanol as reactant and CaO as catalyst for the production of biodiesel.

Current scenario of catalysts for biodiesel production: a critical review

2018 ◽  
Vol 34 (2) ◽  
pp. 267-297 ◽  
Author(s):  
Farrukh Jamil ◽  
Lamya Al-Haj ◽  
Ala’a H. Al-Muhtaseb ◽  
Mohab A. Al-Hinai ◽  
Mahad Baawain ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Low Cost ◽  
Bifunctional Catalyst ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalysts ◽  
Animal Fats ◽  
Current Scenario ◽  
Short Chain Alcohol

AbstractDue to increasing concerns about global warming and dwindling oil supplies, the world’s attention is turning to green processes that use sustainable and environmentally friendly feedstock to produce renewable energy such as biofuels. Among them, biodiesel, which is made from nontoxic, biodegradable, renewable sources such as refined and used vegetable oils and animal fats, is a renewable substitute fuel for petroleum diesel fuel. Biodiesel is produced by transesterification in which oil or fat is reacted with short chain alcohol in the presence of a catalyst. The process of transesterification is affected by the mode of reaction, molar ratio of alcohol to oil, type of alcohol, nature and amount of catalysts, reaction time, and temperature. Various studies have been carried out using different oils as the raw material; different alcohols (methanol, ethanol, butanol); different catalysts; notably homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and supercritical fluids; or, in some cases, enzymes such as lipases. This article focuses on the application of heterogeneous catalysts for biodiesel production because of their environmental and economic advantages. This review contains a detailed discussion on the advantages and feasibility of catalysts for biodiesel production, which are both environmentally and economically viable as compared to conventional homogeneous catalysts. The classification of catalysts into different categories based on a catalyst’s activity, feasibility, and lifetime is also briefly discussed. Furthermore, recommendations have been made for the most suitable catalyst (bifunctional catalyst) for low-cost oils to valuable biodiesel and the challenges faced by the biodiesel industry with some possible solutions.

scholarly journals Pre-Treatment of Waste Frying Oils for Biodiesel Production

2015 ◽  
Vol 9 (7) ◽  
pp. 99 ◽  
Author(s):  
Nyoman Puspa Asri ◽  
Diah Agustina Puspita Sari
Keyword(s):  
Raw Materials ◽  
Batch Reactor ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
High Price ◽  
Composite Catalyst ◽  
Frying Oils ◽  
Animal Fats ◽  
Waste Frying Oils ◽  
Pre Treatment

Synthesis of biodiesel is a strategic step in overcoming energy scarcity and the environmental degradationcaused by the continuous use of the petroleum based energy. Biodiesel as an alternative fuel for diesel engine isproduced from renewable resources such as vegetable oils and animal fats. The main obstacle in the biodieselproduction is the high price of the raw materials, resulting in the price of biodiesel is not competitive comparedto the petroleum diesel. Therefore, the use of waste frying oils (WFO) is one way to reduce the cost of biodieselproduction, because of its availability and low price. In the present work, WFO from California Fried chicken(CFC) restaurants in Surabaya were used as feed stock for the biodiesel production. The experiments wereconducted using three steps of processes: pre-treatment of WFO, preparation of alumina based compositecatalyst CaO/KI/γ-Al2O3 and transesterification of treated WFO. WFO was treated by several types and variousamounts of activated adsobents. The treated WFO was transesterified in three neck glass batch reactor withrefluxed methanol using CaO/KI/γ-Al2O3. The results reveal that the best method for treating WFO is using 7.5%(wt. % to WFO) of coconut coir. Alumina based composite catalyst CaO/KI/γ-Al2O3 was very promising fortransesterification of WFO into biodiesel. The yield of biodiesel was 83% and obtained at 65ºC, 5 h of reactiontime, 1:18 of molar ratio WFO to methanol and 6% amount of catalyst.

Catalysts in Production of Biodiesel: A Review

2007 ◽  
Vol 1 (1) ◽  
pp. 19-30 ◽  
Author(s):  
K. Narasimharao ◽  
Adam Lee ◽  
Karen Wilson
Keyword(s):  
Sulfuric Acid ◽  
Supercritical Fluids ◽  
Potassium Hydroxide ◽  
Heterogeneous Catalysts ◽  
Raw Material ◽  
Molar Ratio ◽  
Monohydric Alcohol ◽  
Animal Fats ◽  
Advantages And Disadvantages ◽  
Oil Type

Biodiesel is a renewable substitute fuel for petroleum diesel fuel which is made from nontoxic, biodegradable, renewable sources such as refined and used vegetable oils and animal fats. Biodiesel is produced by transesterification in which oil or fat is reacted with a monohydric alcohol in the presence of a catalyst. The process of transesterification is affected by the mode of reaction, molar ratio of alcohol to oil, type of alcohol, nature and amount of catalysts, reaction time, and temperature. Various studies have been carried out using different oils as the raw material and different alcohols (methanol, ethanol, butanol), as well as different catalysts, notably homogeneous ones such as sodium hydroxide, potassium hydroxide, sulfuric acid, and supercritical fluids or enzymes such as lipases. Recent research has focused on the application of heterogeneous catalysts to produce biodiesel, because of their environmental and economic advantages. This paper reviews the literature regarding both catalytic and noncatalytic production of biodiesel. Advantages and disadvantages of different methods and catalysts used are discussed. We also discuss the importance of developing a single catalyst for both esterification and transesterification reactions.

scholarly journals PENGARUH SUHU REAKSI DAN JUMLAH KATALIS PADA PEMBUATAN BIODIESEL DARI LIMBAH LEMAK SAPI DENGAN MENGGUNAKAN KATALIS HETEROGEN CaO DARI KULIT TELUR AYAM

2015 ◽  
Vol 4 (1) ◽  
pp. 35-41 ◽  
Author(s):  
Wendi ◽  
Valentinoh Cuaca ◽  
Taslim
Keyword(s):  
Methyl Ester ◽  
Beef Tallow ◽  
Low Cost ◽  
Maximum Yield ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Animal Fats ◽  
Acid Catalyzed ◽  
Methyl Ester Content

Biodiesel is an alternative fuel for diesel engines consisting of the alkyl monoesters from vegetable oils or animal fats. Beef tallow waste is the non-edible raw material with low cost production and the availability is huge in the cattle production. The objective of the study was to utilize beef tallow waste for biodiesel production using solid oxide catalyst which derived from the industrial eggshells. The materials calcined with temperature 900oC and time 2 hours, transformed calcium species in the shells into active CaO catalysts.The oil contained high free fatty acid (FFA) content of 1.86%. The FFA content of the oil was reduced by acid-catalyzed esterification. The product from this stage was subjected to produce biodiesel. Transesterification process reacts oil and methanol to produce methyl ester and glycerol. The produced methyl ester on the upper layer was separated from the glycerol and then washed. Effect of various process variables such as amount of catalyst and temperature were investigated. The biodiesel properties like methyl ester content, density, viscosity, and flash point was evaluated and was found to compare well with Indonesian Standard (SNI). Under the best condition, the maximum yield of 82.43% beef tallow methyl ester was obtained by using 9:1 molar ratio of methanol to beef tallow oil at 55oC, for a reaction time 1.5 hours in the presence 3 wt% of CaO catalyst. The results of this work showed that the use of beef tallow is very suitable as low cost feedstock for biodiesel production.

scholarly journals Red Mud-Based Polyaluminum Ferric Chloride Flocculant: Preparation, Characterization and Flocculation Performance

2021 ◽  
Author(s):  
Yong Cheng ◽  
Longjun Xu ◽  
Chenglun Liu ◽  
Zao Jiang ◽  
Qiyuan Zhang ◽  
...  
Keyword(s):  
Red Mud ◽  
High Efficiency ◽  
Low Cost ◽  
Oxygen Demand ◽  
Industrial Applications ◽  
Iron Chloride ◽  
Raw Material ◽  
Molar Ratio ◽  
Polymerization Temperature ◽  
Solution Ph

Abstract In this work, red mud was used as raw material to extract Al and Fe with hydrochloric acid. The high-efficiency polyaluminum iron chloride (PAFC) flocculant was prepared via adjusting the pH of the leaching solution, the molar ratio of aluminum and iron, and the polymerization temperature. The effect of synthesis and flocculation conditions on the flocculation performance of aged landfill leachate was investigated. The results confirmed that the PAFC prepared at the polymerization pH of 2.5, the Al/Fe molar ratio of 8, and the polymerization temperature of 70 °C had the optimum flocculation effect. The flocculation consequences of PAFC and commercial polyaluminum iron chloride flocculant (CPAFC) under different flocculation conditions were compared. The chemical oxygen demand (COD), UV254, chroma and settlement height of PAFC at flocculant concentration of 60 g/L and solution pH of 6 were 72.2%, 79.2%, 82.9% and 9.5 cm (within 90 min), respectively. PAFC has excellent flocculation performance and can be used as a simple, potentially low-cost wastewater treatment agent in industrial applications.

scholarly journals Possible application of brewer’s spent grain in biotechnology

2013 ◽  
Vol 67 (2) ◽  
pp. 277-291 ◽  
Author(s):  
Jelena Pejin ◽  
Milos Radosavljevic ◽  
Olgica Grujic ◽  
Ljiljana Mojovic ◽  
Suncica Kocic-Tanackov ◽  
...  
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Low Cost ◽  
Cellulose Hydrolysis ◽  
Raw Material ◽  
Charcoal Production ◽  
Spent Grain ◽  
Pre Treatment ◽  
Beer Production ◽  
By Products

Brewer?s spent grain is the major by-product in beer production. It is produced in large quantities (20 kg per 100 liters of produced beer) throughout the year at a low cost or no cost, and due to its high protein and carbohydrates content it can be used as a raw material in biotechnology. Biotechnological processes based on renewable agro-industrial by-products have ecological (zero CO2 emission, eco-friendly by-products) and economical (cheap raw materials and reduction of storage costs) advantages. The use of brewer?s spent grain is still limited, being basically used as animal feed. Researchers are trying to improve the application of brewer?s spent grain by finding alternative uses apart from the current general use as an animal feed. Its possible applications are in human nutrition, as a raw material in biotechnology, energy production, charcoal production, paper manufacture, as a brick component, and adsorbent. In biotechnology brewer?s spent grain could be used as a substrate for cultivation of microorganisms and enzyme production, additive of yeast carrier in beer fermentation, raw material in production of lactic acid, bioethanol, biogas, phenolic acids, xylitol, and pullulan. Some possible applications for brewer?s spent grain are described in this article including pre-treatment conditions (different procedures for polysaccharides, hemicelluloses, and cellulose hydrolysis), working microorganisms, fermentation parameters and obtained yields. The chemical composition of brewer?s spent grain varies according to barley variety, harvesting time, malting and mashing conditions, and a quality and type of unmalted raw material used in beer production. Brewer?s spent grain is lignocellulosic material rich in protein and fibre, which account for approximately 20 and 70% of its composition, respectively.

scholarly journals Optimization of the Production of Enzymatic Biodiesel from Residual Babassu Oil (Orbignya sp.) via RSM

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 414 ◽  
Author(s):  
Katerine S. Moreira ◽  
Lourembergue S. Moura Júnior ◽  
Rodolpho R. C. Monteiro ◽  
André L. B. de Oliveira ◽  
Camila P. Valle ◽  
...  
Keyword(s):  
Low Cost ◽  
Ethyl Esters ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Enzymatic Esterification ◽  
Maximum Loss ◽  
Babassu Oil ◽  
Small Change ◽  
Optimized Conditions

Residual oil from babassu (Orbignya sp.), a low-cost raw material, was used in the enzymatic esterification for biodiesel production, using lipase B from Candida antarctica (Novozym® 435) and ethanol. For the first time in the literature, residual babassu oil and Novozym® 435 are being investigated to obtain biodiesel. In this communication, response surface methodology (RSM) and a central composite design (CCD) were used to optimize the esterification and study the effects of four factors (molar ratio (1:1–1:16, free fatty acids (FFAs) /alcohol), temperature (30–50 °C), biocatalyst content (0.05–0.15 g) and reaction time (2–6 h)) in the conversion into fatty acid ethyl esters. Under optimized conditions (1:18 molar ratio (FFAs/alcohol), 0.14 g of Novozym® 435, 48 °C and 4 h), the conversion into ethyl esters was 96.8%. It was found that after 10 consecutive cycles of esterification under optimal conditions, Novozym® 435 showed a maximum loss of activity of 5.8%, suggesting a very small change in the support/enzyme ratio proved by Fourier Transform Infrared (FTIR) spectroscopy and insignificant changes in the surface of Novozym® 435 proved by scanning electron microscopy (SEM) after the 10 consecutive cycles of esterification.

scholarly journals Two Step and Direct Fermentation in the Production of Ethanol from Starch: A Short Review

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Endah Retno Dyartanti ◽  
Margono Margono ◽  
Anisa Raditya Nurohmah ◽  
Shofirul Sholikhatun Nisa ◽  
Novan Riantosa
Keyword(s):  
Ethanol Production ◽  
Raw Materials ◽  
Low Cost ◽  
Short Review ◽  
Raw Material ◽  
High Yield ◽  
Direct Production ◽  
Pre Treatment ◽  
Ph Range ◽  
Direct Fermentation

Ethanol as a renewable fuel has been widely produced in various countries. One source of raw material for producing ethanol is starch. The process of producing ethanol from starch needs to be pretreated so that starch molecules can split into smaller ones. However, this process requires pre-treatment which will expensive more than ethanol from sugar. There are two types of pretreatment i.e. two-step ethanol production and direct fermentation. There is two kind of hydrolysis, acid hydrolysis, and enzymatic hydrolysis. Two-step ethanol production is a conventional method that separates pretreatment and fermentation process, while direct fermentation is the direct production of starch into ethanol using recombinant yeast that co-produces enzymes such as amylose and glucoamylase. Two-step ethanol production has the advantage of high yield but needs high cost whereas, direct fermentation has the advantage of low-cost production but needs longer time. Common starch to ethanol production consists of two stages, namely hydrolysis of raw materials into glucose and fermentation into ethanol. Both of these processes can be run on average at temperatures of 30-80<sup>o</sup>C with a pH range of 4-6 and varying time intervals. The enzyme used depends on the source of the starch, but the most commonly used is <em>Saccharomyces cerevisiae</em>.

scholarly journals Non-Edible Moringa Oleifera Seeds for Environmentally Friendly Biodiesel – A Review

2021 ◽  
Vol 5 (1) ◽  
pp. 79-90
Author(s):  
Miranti Nur Arafah ◽  
Raden Sukmawati ◽  
Hasna Mutiara Safitri ◽  
Herawati Budiastuti
Keyword(s):  
Heterogeneous Catalysts ◽  
Moringa Oleifera ◽  
Seed Oil ◽  
Raw Material ◽  
Molar Ratio ◽  
High Yield ◽  
Operating Parameters ◽  
Journal Articles ◽  
Literature Study ◽  
Astm D6751

ABSTRAKKetersediaan bahan bakar fosil semakin lama semakin berkurang. Hal tersebut menyebabkan dibutuhkannya pengganti bahan bakar alternatif yaitu biodiesel. Minyak biji kelor memiliki potensi sebagai bahan baku pembuatan biodiesel, karena kandungan asam oleatnya yang tinggi yaitu 75,36 –87,49%. Penelitian ini bertujuan untuk mengkaji pembuatan biodiesel, penggunaan katalis heterogen serta pengaruh parameter operasi terhadap hasil dan kualitas biodiesel dari minyak biji kelor dengan metode studi literatur. Tahapan yang dilakukan dalam studi literatur ini adalah pengumpulan, pemisahan dan analisis artikel jurnal serta perumusan pembahasan dan kesimpulan. Pembuatan biodiesel minyak biji kelor dilakukan dengan beberapa tahapan proses, yaitu pengambilan minyak dari biji, proses esterifikasi-transesterifikasi dan pemurnian biodiesel. Parameter operasi yang paling berpengaruh dalam menghasilkan biodiesel minyak biji kelor adalah rasio molar metanol dan minyak, konsentrasi katalis, waktu reaksi dan temperatur reaksi. Penggunaan katalis heterogen mampu menghasilkan yield biodiesel minyak biji kelor yang tinggi yaitu rata-rata lebih besar dari 90%. Biodiesel minyak biji kelor telah sesuai dengan standar nasional (SNI 7182 : 2015) dan internasional (ASTM D6751 dan EN 14214)Kata Kunci: Biodisel Minyak Biji Kelor, Katalis Heterogen, Parameter Operasi, Karakteristik Biodiesel. ABSTRACTThe availability of fossil fuels is decreasing over time. This causes the need for an alternative fuel substitute, namely biodiesel. Moringa oleifera seeds are the raw material for making Moringa seed oil, used as raw material for making biodiesel. This is due to its high oleic acid contents, in the range of 75,36% - 87,49% the objectives of this study are to observe the production of biodiesel from Moringa seed oil, the use of heterogeneous catalysts in the production of Moringa seed oil biodiesel, the effect of operating parameters on the yield and quality of biodiesel produced. Literature study was done in this research, including the collection of journal articles, separation and analysis of journal articles, as well as the formulation of discussions and conclusions. Based on this study, there are several stages in the production of Moringa seed oil biodiesel, namely extracting oil from the seeds, esterification- transesterification, and refining of biodiesel. Operating parameters affect the manufacture of Moringa seed oil biodiesel. The most influential operating parameters are the molar ratio of methanol and oil, catalyst concentration, reaction time, and reaction temperature. The use of heterogeneous catalysts is able to produce a high yield of Moringa seed oil biodiesel, which is on average greater than 90%. Moringa seed oil biodiesel complies with both national (SNI 7182: 2015) and international (ASTM D6751 and EN 14214) standardr.Keywords: Moringa Seed Oil, Biodiesel, Heterogeneous Catalyst, Operating Parameters

Preparation of KI-Impregnated Razor Clam Shell as a Catalyst and its Application in Biodiesel Production from Jatropha curcas Oil

2017 ◽  
Vol 744 ◽  
pp. 506-510 ◽  
Author(s):  
Achanai Buasri ◽  
Pittayarat Chaibundit ◽  
Metawee Kuboonprasert ◽  
Arnan Silajan ◽  
Vorrada Loryuenyong
Keyword(s):  
Potassium Iodide ◽  
Jatropha Curcas ◽  
Low Cost ◽  
Acid Methyl Ester ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Solid Catalyst ◽  
Clam Shell ◽  
Razor Clam

Nowadays, utilization of biomass is considered to have the potential to solve many environmental problems and provide a source of renewable and environmentally-friendly energy. Research on green and low cost catalysts is needed for economical production of biodiesel. The goal of this work was to test potassium iodide (KI)-impregnated calcined razor clam shell as a heterogeneous catalyst for transesterification of Jatropha curcas oil in a microwave reactor. The effects of different preparation conditions on biodiesel yield were investigated and the structure of the catalyst was characterized. The raw material and the resulting solid catalyst were characterized using X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The waste shell displays a typical layered architecture. The sample had the surface area 16.51 m2/g, pore diameter 22.18 nm and pore volume 0.14 cm3/g, and presented a uniform pore size. The highest fatty acid methyl ester (FAME) yield of 96.99% for potassium iodide-calcium oxide (KI-CaO) catalyst was obtained under the optimum condition (reaction time 5 min, microwave power 600 W, methanol/oil molar ratio 12:1, and catalyst dosage 3 wt%). It was showing potential applications of catalyst in biodiesel industry.

Sign in / Sign up

Export Citation Format

Share Document