PERSPECTIVE OF USE OF SUGAR BEET PRODUCTION WASTE - MOLASSES IN TECHNOLOGY OF RUBBER ISOLATION FROM LATEX

1970 ◽  
Vol 61 (11) ◽  
Author(s):  
Nadezhda S. Nikulina ◽  
Victor N. Verezhnikov ◽  
Sergey S. Nikulin ◽  
Marya A. Provotorova ◽  
Inna N. Pugacheva
Keyword(s):  
Sulfuric Acid ◽  
New Technologies ◽  
Raw Materials ◽  
Low Cost ◽  
Production Waste ◽  
Urgent Task ◽  
Softened Water ◽  
Treatment Facilities ◽  
Butadiene Styrene

At present, much attention is paid to improving the production of synthetic rubbers. The introduction of new technologies to increase the productivity of the process, more fully and rationally use valuable hydrocarbon raw materials, reduce environmental pollution and improve the quality of the products is an important and urgent task. Equally important in this case is the selection of new coagulating agents used in the technology of rubber release from latex. The main requirements for coagulating agents used in the technology of rubber release from latex are: availability, low cost, non-toxicity, ease of cleaning of sewage coming to treatment facilities from them. The possibility of application of the beet-sugar production waste - molasses for beet-lean depletion - in the technology of producing butadiene-styrene rubber SKS-30 ARC has been studied. A feature of the behavior of molasses, as a coagulating agent, is shown when isolating rubber from latex. It has been established that the consumption of molasses in the isolation of butadiene-styrene rubber from latex is closely related to the consumption of acidifying agent - sulfuric acid. The higher the molasses input for coagulation, the higher the consumption of sulfuric acid to maintain the pH of the medium at the required level. The temperature of the process did not have a significant effect on the completeness of the release of rubber from latex. The extracted crumb of rubber was separated from the aqueous phase (sulfur), washed with warm softened water and dried. On the basis of the rubber obtained, rubber mixtures were prepared using standard components and vulcanized. Rubbers obtained on the basis of rubber SKS-30 ARC, in their indicators meet the requirements.

scholarly journals Comparative Analysis of QoS Management and Technical Requirements in 3GPP Standards for Cellular IoT Technologies

2018 ◽  
Vol 2 ◽  
pp. 41-47 ◽  
Author(s):  
Valery Tikhvinskiy ◽  
Grigory Bochechka ◽  
Andrey Gryazev ◽  
Altay Aitmagambetov
Keyword(s):  
Comparative Analysis ◽  
New Technologies ◽  
Narrow Band ◽  
Low Cost ◽  
Low Latency ◽  
Qos Management ◽  
Technical Requirements ◽  
Iot Devices ◽  
Positive Results

Optimization of 3GPP standards that apply to cellular technologies and their adaptation to LPWAN has not led to positive results only enabling to compete on the market with the growing number non-cellular greenfield LPWAN technologies – LoRa, Sigfox and others. The need to take into consideration, during the 3GPP standard optimization phase, the low-cost segment of narrow-band IoT devices relying on such new technologies as LTE-M, NB-IoT and EC-GSM, has also led to a loss of a number of technical characteristics and functions that offered low latency and guaranteed the quality of service. The aim of this article is therefore to review some of the most technical limitations and restrictions of the new 3GPP IoT technologies, as well as to indicate the direction for development of future standards applicable to cellular IoT technologies.

Development of new technologies for sorting of fibrous cotton stalks by the combined method “ADAU” and production of sowing material

2021 ◽  
Vol 70 (09) ◽  
pp. 7-13
Author(s):  
Şahlar Mahmud oğlu Babayev ◽  
◽  
Camaləddin Ələkbər oğlu Məmmədov ◽  
Səfiyyə İbrahim qızı Məhərrəmova ◽  
◽  
...  
Keyword(s):  
Agricultural Sector ◽  
New Technologies ◽  
Raw Materials ◽  
New Technology ◽  
Absorption Capacity ◽  
Cotton Stalks ◽  
Cotton Yarns ◽  
The Republic ◽  
Selection Of

The article is devoted to the development of technologies for the production of quality sowing material, which is the main problem of cotton growing, which has a greater share in the agricultural sector, which is the basis of the economy of the republic. For this purpose, a new technology for the production of sowing material was developed as a result of the selection of biologically mature yarns during the combined sorting of fibrous cotton yarns, as well as processing of these yarns by the proposed method, and two positive decisions were made by the Intellectual Property Agency. In addition to the mentioned advantages of the proposed technology, the use of low-percentage starch solution, as well as absorbents with high absorption capacity (zeolite or bentonite) in the country to improve the quality of sowing material in the production of sowing material as a result of processing raw materials. indicates that it has indicators. Key words: fiber, cotton, yarn, combined, sorting, sowing material, production, technology

MODERN TECHNOLOGIES OF PRELIMINARY WATER PURIFICATION AT RAISED TECHNOGENIC LOADS OF THE WATER SOURCE

2013 ◽  
Vol 3 (4S) ◽  
pp. 93-95
Author(s):  
Anna E USYNINA ◽  
Ludmila V BORONINA
Keyword(s):  
Drinking Water ◽  
Water Purification ◽  
New Technologies ◽  
Water Source ◽  
Modern World ◽  
High Quality ◽  
Technogenic Loads ◽  
Treatment Facilities ◽  
Modern Technologies

In the modern world indisputable value for the population is represented by qualitative water. The extremely unsatisfactory quality of drinking water is caused by limited opportunities of work of treatment facilities in the conditions of anthropogenous loads of water sources. Search of new technologies of high-quality prewater purifi cation it is extremely necessary.

scholarly journals Применение оптических технологий для изучения и идентификации микроорганизмов (обзор)

2021 ◽  
Vol 129 (1) ◽  
pp. 100
Author(s):  
А.Н. Cпицын ◽  
Д.В. Уткин ◽  
О.С. Кузнецов ◽  
П.С. Ерохин ◽  
Н.А. Осина ◽  
...  
Keyword(s):  
High Speed ◽  
New Technologies ◽  
Low Cost ◽  
Detection Sensitivity ◽  
Advantages And Disadvantages ◽  
Urgent Task ◽  
Significant Interest ◽  
Analytical Reliability ◽  
High Degree ◽  
Diagnostic Technologies

The study and identification of microorganisms plays asignificant role in the diagnosis of infectious diseases, so an important and urgent task is to introduce new technologies aimed at improving research. Obtaining quantitative and qualitative information about bacteria with high speed, specificity, detection sensitivity, low cost and ease of analysis is particularly substantial. This review examines the use of modern diagnostic technologies that allow for the study of biological systems with a high degree of analytical reliability. Technologies of Raman spectroscopy, FTIR spectroscopy, and surface plasmon resonance used in modern biosensors have proven to be significant and promising research tools. The main advantages and disadvantages of the methods used, as well as the results of their practical use, are indicated. A significant interest induce modern approaches in studying of microorganisms with the use of genetic protein dye – GFP and with applaying nanomaterials – theranostics.

A Rapid, Low Cost, Manual Fusion Sample Preparation Technique for Quantitative X-Ray Fluorescence Analysis

1983 ◽  
Vol 27 ◽  
pp. 491-496
Author(s):  
Gerald D. Bowling ◽  
Iris B. Ailin-Pyzik ◽  
David R. Jones
Keyword(s):  
Raw Materials ◽  
Low Cost ◽  
Surface Preparation ◽  
Fluorescence Analysis ◽  
Preparation Technique ◽  
Muffle Furnace ◽  
X Ray ◽  
Fusion Device ◽  
Sample Preparation Technique

This study compares the quality of the fused samples obtained by three separate methods. The first set of samples was prepared by the method used at USGS in Denver and reported by Taggart and Whalberg (1). The second set was fused by our manual method and cast in graphite molds. The third set was fused in the Herzog HAG-12 automated fusion device.The manual fusion technique requires the use of a muffle furnace capable of 1100°C (2100°F) and graphite molds. No release agents such as KBr and LiBr are required since the disks release easily from the graphite. The 25mm diameter center of the “fire-polished” upper surface of the disk is used for analysis without further surface preparation. This method has been shown to be suitable for preparation of a wide variety of glasses and raw materials including burned dolomite, silicates* high zircon materials such as BCS-388, calcined alumina and alumina refractories.

scholarly journals Environmentally friendly building materials for residential high-rise construction

2019 ◽  
Vol 91 ◽  
pp. 02008
Author(s):  
Ruben Kazaryan ◽  
Vitaly Khvan
Keyword(s):  
Construction Projects ◽  
Building Materials ◽  
Raw Materials ◽  
High Rise ◽  
Urgent Task ◽  
Building Systems ◽  
Technical Specifications ◽  
Near Future ◽  
Sufficient Strength

Materials, products and systems used as finishing of external surfaces and/or interior rooms when erecting or reconstructing buildings and structures should: protect the person in the room finished with these materials from the pathogenic effects of materials, products and building systems; if possible, do not exert pathological physiological and/or activity loads on people carrying out production or life activities in rooms finished with these materials and/or equipped with products and systems. As a result of the research, it was found that the source of 80% of the chemicals found in the air environment of the apartments is used construction and finishing materials. Currently, the quality of raw materials for building materials and the building materials and structures themselves are determined by GOST and Technical Specifications. A civil engineer is required to correctly select a material, product, or structure that has sufficient strength, reliability, and durability for specific conditions. Safe in themselves, finishing materials, products, and systems in the composition can acquire and demonstrate new properties. Therefore, the study of this problem is an urgent task of the near future and one of the directions of construction anthropotechnology, in particular, when implementing high-rise construction projects.

The Treatment of Oil in Refinery Wastewater in South East Asia

1986 ◽  
Vol 18 (3) ◽  
pp. 17-21 ◽  
Author(s):  
R. A. Radevsky ◽  
D. A. Burt
Keyword(s):  
Pollution Control ◽  
Low Cost ◽  
Treatment Plant ◽  
Oil Industry ◽  
Effluent Treatment ◽  
Pollution Levels ◽  
Effluent Treatment Plant ◽  
Treatment Facilities ◽  
Correct Application

In response to more severe pollution control regulations and from a desire to reduce pollution levels, oil industry installations are having to re-examine their effluent treatment facilities. Options for upgrading the quality of effluent discharged include: improvements in water management to decrease volumes of effluent produced in processes; modifications to existing effluent treatment plant both in performance and operating procedures by the installation of new components or the replacement of individual units; and the installation of completely new effluent treatment facilities using the latest technology. In most existing plants considerable increases in efficiency can be brought about at relatively low cost by the correct application of a range of options. Where new installations are being constructed valuable lessons may be learned by examining the problems that are occurring in plants already in operation. Improvements may thus be made on existing designs.

scholarly journals Effects of the Marinating Process on the Quality of the Domesticated Reindeer (Rangifer Tarandus) By-products

2020 ◽  
Author(s):  
Ilya Benzik ◽  
Inna Brazhnaia ◽  
Elena Bogdan ◽  
Alexander Ershov
Keyword(s):  
Rangifer Tarandus ◽  
New Technologies ◽  
Raw Materials ◽  
Educational Institution ◽  
Food Product ◽  
Production Costs ◽  
Federal State ◽  
Production Technologies ◽  
By Products

The development of methods for the complete and complex processing of raw food materials is one of the main ways to achieve the efficiency of its use: reduce production costs, expand products range and increase products demand. Over the last years, growing attention is paid to the search and development of new technologies of the processing of non-traditional and underutilized types of food materials, such as meat and by-products from alternative animal species. The research was aimed at studying the influence of the marinating process on the quality of the newly developed food product. The object of research was the tongue of domesticated reindeer, the underutilized raw materials of the Kola Peninsula. Product samples were taken in 2012-2016 on the basis of the agricultural production cooperative ”Tundra”, research was carried out on the basis of the Department of Food Production Technologies of the Federal State Budgetary Educational Institution of Higher Education ”Murmansk State Technical University”. The effects of marinating and duration of heat treatment on the quality of the product samples was studied. The parameters characterizing the generalized indicator of quality were selected - organoleptic (appearance, flavor and taste), physical (cutting force) and microbiological. The optimal composition of the marinade is proposed. The technology of culinary processing of the domesticated reindeer tongue was optimized.

scholarly journals Different Sensor Systems for the Application of Variable Rate Technology in Permanent Crops

2018 ◽  
Vol 12 (3) ◽  
pp. 188-195 ◽  
Author(s):  
Davor Petrović ◽  
Željko Barač
Keyword(s):  
Optical Sensors ◽  
Precision Agriculture ◽  
New Technologies ◽  
Negative Impact ◽  
Low Cost ◽  
Application Rate ◽  
Sensor Systems ◽  
Infrared Sensors ◽  
Ecological Principles

The paper presents a review of different sensory systems for trees’ characterization and detection in permanent crops and the detection of plant health status in crop conditions for the purpose of applying the variable application rate. The use of new technologies enables the use of variable inputs in production with the aim of increasing the economic profit and reducing the negative impact on the environment. World trends increasingly emphasize the use of various sensor systems to achieve precision agriculture and apply the following: ultrasonic sensors for the detection of permanent crops; LIDAR (optical) sensors for treetop detection and characterization; infrared sensors with similar characteristics of optical sensors, but with very low cost prices and N - sensors for variable nitric fertilization. The daily development of sensor systems applied in agricultural production improves the performance and quality of the machines they are installed on. With a more intensive use of sensors in agricultural mechanization, their price becomes more acceptable for widespread use by achieving high quality work with respect to the ecological principles of sustainable production.

scholarly journals Slime control in paper mill using biological agents as biocides

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Puneet Pathak ◽  
Varun Kumar ◽  
Nishi Kant Bhardwaj ◽  
Chhavi Sharma
Keyword(s):  
Microbial Growth ◽  
New Technologies ◽  
Raw Materials ◽  
Paper Mill ◽  
Specific Substrate ◽  
Paper Mills ◽  
Slime Control ◽  
The Cost ◽  
Favorable Temperature

Abstract The environmental conditions of paper mills are suitable for the growth of slime-forming microorganisms due to the supply of nutrients, favorable temperature, and moisture. The slime formation causes the spoilage of raw materials & additives, breaks in the paper during papermaking, loss of production, reduces the hygienic quality of the end products, produces off-spec and rejected products, creates microbiological corrosion, and produces harmful gases. The main microorganisms are Bacteria (mainly Bacillus spp., Achromobacter spp., Enterobacter spp., Pseudomonas spp., Clostridium, etc.), Fungi (Aspergillus, Penicillium, Saccharomyces, etc.), and Algae. Besides the use of conventional toxic chemical biocides or slimicides, slime formation can also be controlled in an eco-friendly way using enzymes, bacteriophages, biodispersants, and biocontrol agents alone or along with biocides to remove the slime. Enzymes have shown their effectiveness over conventional chemicals due to nontoxic and biodegradable nature to provide clean and sustainable technology. Globally enzymes are being used at some of the paper mills and many enzymatic products are presently being prepared and under the trail at laboratory scale. The specificity of enzymes to degrade a specific substrate is the main drawback of controlling the mixed population of microorganisms present in slime. The enzyme has the potential to provide the chemical biocide-free solution as a useful alternative in the future with the development of new technologies. Microorganisms control in the paper mill may appear as a costly offer but the cost of uncontrolled microbial growth can be much higher leading to slime production and large economic drain.

Sign in / Sign up

Export Citation Format

Share Document