scholarly journals QUANTITATIVE AND QUALITATIVE BUFFALO (Bubalus bubalis L.) CARCASS CHARACTERISTICS FED WITH A DIFFERENT RELATIONSHIP OF ROUGHAGE AND CONCENTRATE ON A FEEDLOT SYSTEM IN BRAZIL

2006 ◽  
Vol 4 (3) ◽  
pp. 33 ◽  
Author(s):  
Marcos Elias Traad da Silva ◽  
José Sidney Flemming ◽  
José Lino Martinez ◽  
Nina Waszczynskyj ◽  
Carlos Ricardo Soccol
Keyword(s):  
Block Design ◽  
Energy Levels ◽  
Carcass Characteristics ◽  
Bubalus Bubalis ◽  
Carcass Weight ◽  
Leg Length ◽  
Muscle Area ◽  
Significant Difference ◽  
Quantitative Characteristics ◽  
Dressing Percentage

Eighteen non castrated Murrah male buffaloes, averaging 403 kg in weight, have been used in a feed lot randomized complete-block design, to test three different diets (T) with different combination of roughage (R) and concentrate (C). Tukey test has been used (5% of significance) to evaluate the obtained averages. The trial was carried on at AGRONOMIC INSTITUTE OF PARANÁ (Pinhais town, Paraná, Brazil), during 91 days. The animals have been fed twice daily, and the diets contained (%): T1 =75 R : 25 C; T2 =65 R : 35 C and T3 =55 R : 45 C, and it was calculated to have the same level of protein and energy in its composition, aiming to evaluate the diets effects on the animals’ performance on body weight and carcass characteristics. The R utilised was corn silage plus 0.5% of urea. The C was composed by soybean, wheat meal, corn, cottonseed, plus mineral, presenting: T1 =32.78 and 71.08; T2 =24.17 and 66.50; T3 =20.23 and 63.84, in percentage of crude protein and total digestive nutrients, respectively. The following quantitative characteristics have been evaluated: Hot Carcass Weight (HCW); Cold Carcass Weight (CCW); Hot Carcass Dressing Percentage (HCP); Cold Carcass Dressing Percentage (CCP); Loss After Cooling (LC); Carcass Length (CL); Leg Length (LL); Thigh Thickness (TT); Longissimus dorsi muscle area between 12th and 13th ribs (LA); Loin Area per 100kg of Cold Carcass (LA/100kg CC); Loin Fat Thickness Under the Skin, measured between the 12th and 13th ribs (LF); Bones Percentage (BP), Muscle (MP) and Fat (FP) of the Carcass - data, relative to 9th, 10th and 11th ribs. The evaluated qualitative characteristics were: Carcass Conformation (CONF); Meat Marbling (MM); Meat Texture (MT); Meat Color (MC). The diets have not affected (P > 0.05) the main carcass characteristics: HCW(kg)=265.83; 267.67 and 268.67; CCW(kg)=257.97; 260.92 and 259.27; HCP(%)=50.28; 51.20 and 51.05; CCP(%)=48.80; 48.81 and 49.45; LC(%)=2.96; 2.91 and 3.13; CL(cm)=133.75; 133.50 and 135.83; LL(cm)=70.66; 71.33 and 72.40; TT(cm)=26.16; 26.25 and 26.25; LA(cm2 )=65.48; 67.83 and 62.76; LA/100kg CC(cm2 )=25.37; 26.16 and 24.20; LF(mm)=7.58; 8.42 and 6.88, respectively for T1 , T2 , and T3 . Higher values (P < 0.05) of BP (%) have been observed in T3 (17.32) when compared with T1 (16.06). However, T2 (16.38) had a non-significant difference (P > 0.05). The MP (%) and FP (%) were similar (P > 0.05) for the three diets, and the values were: T1 =56.47 and 27.85; T2 =61.07 and 22.73; T3 =59.00 and 23.50, respectively. The diets have not affected (P > 0.05) the qualitative carcass characteristics, and the marbling observed has been classified as soft. It has been concluded that the use of different relations of roughage and concentrate for non-castrated male buffaloes, submitted to a confined system, on diets of the same protein and energy levels, at the trial conditions, have not influenced the productive performance of the animals, neither the carcass qualitative and quantitative characteristics.

A COMPARISON OF FEEDLOT PERFORMANCE AND CARCASS CHARACTERISTICS OF CHARBRAY × HEREFORD WITH HEREFORD STEERS

1959 ◽  
Vol 39 (1) ◽  
pp. 14-20 ◽  
Author(s):  
M. A. MacDonald ◽  
S. B. Slen ◽  
H. J. Hargrave
Keyword(s):  
Muscle Fibre ◽  
Carcass Characteristics ◽  
Carcass Weight ◽  
Longissimus Dorsi ◽  
Average Thickness ◽  
Feedlot Performance ◽  
Commercial Feed ◽  
Significant Difference ◽  
Dressing Percentage

Bulls of Charbray breeding and Hereford bulls were turned out with a commercial herd of Hereford cows in southwestern Saskatchewan in 1956. It was assumed the cows were bred at random. At weaning in 1957, 25 Charbray × Hereford (crossbred) steers and 25 Hereford steers were selected at random, weighed and removed to a commercial feed lot where they were fed in two groups to a desirable slaughter finish.Crossbred steers were heavier at weaning, gained more per day on feed and returned a higher hot carcass weight with a greater eye of lean area than Hereford steers. There was no significant difference between groups in dressing percentage, average thickness of rib fat, TDN consumption per pound of liveweight gain, or average muscle fibre diameters of samples taken from m. longissimus dorsi. The Hereford group produced a higher proportion of choice carcasses than the Charbray × Hereford group.

scholarly journals Effect of feeding dry-rolled corn or whole shelled corn during the finishing phase on growth performance and carcass characteristics

2020 ◽  
Author(s):  
T B Freitas ◽  
T L Felix ◽  
C Clark ◽  
F L Fluharty ◽  
A E Relling
Keyword(s):  
Growth Performance ◽  
Feed Efficiency ◽  
Dry Matter ◽  
Block Design ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feedlot Cattle ◽  
Carcass Weight ◽  
Muscle Area ◽  
Quality Grade

Abstract The objectives of this trial were to evaluate the effect of corn processing during the finishing phase on feedlot cattle performance and carcass characteristics. We hypothesized that steers fed dry-rolled corn would have better feed efficiency (less feed necessary to the same amount of gain) than steers fed whole shelled corn. Ninety-five backgrounded Angus-cross cattle, (initial body weight (BW) = 263 ± 9.8 kg) were used in a randomized complete block design in a feedlot setting. Cattle were divided in to 3 blocks: heifers (n = 31, 4 pens; initial BW = 267 ± 1.3 kg), light steers (n = 32, 4 pens; initial BW = 253 ± 1.3 kg), and heavy steers (n = 32, 4 pens; initial BW = 279 ± 1.4 kg). Diets contained 70% corn (experimental treatment), 15% dried distiller’s grains with solubles, 7% grass hay, and 8% supplement, on a dry matter basis. Cattle were fed for 217, 224, and 231 ± 8 d for the heifer, heavy steer, and light steer blocks, respectively. Two pens within each block were randomly assigned to one of the following treatments: 1) dry-rolled corn (DRC) or 2) whole shelled corn (WSC). Animal growth performance and carcass characteristics were analyzed using the MIXED procedure of SAS, including the fixed effect of treatment. Pen and block were included as random effects. Carcass characteristics USDA Yield Grade and Quality Grade distributions were compared using the GLIMMIX procedure of using the same model than the growth performance data. Data are presented as LSMeans. Cattle fed DRC had greater average daily gain (ADG; P = 0.02) and final BW (P &lt; 0.01) when compared with cattle fed WSC. Even though ADG was greater for the DRC treatment, feed efficiency was similar (P = 0.45) because dry matter intake (DMI) was also greater (P = 0.04) for DRC when compared with the WSC treatment. Cattle fed DRC also had greater hot carcass weight (P &lt; 0.01), dressing percentage (P &lt; 0.01), and Longissimus dorsi muscle area (LMA; P &lt; 0.01) than cattle fed WSC. No differences (P ≥ 0.18) were observed for marbling score, USDA Yield Grade or USDA Quality Grade. In conclusion, feeding DRC to feedlot cattle improved ADG, hot carcass weight, and LMA, without affecting feed efficiency or meat quality.

scholarly journals The Effect of Dried Blood Rumen Content Mixture (D BRCM) on Carcass Characteristics of SASSO C44 Broiler Chicks

2016 ◽  
Vol 12 (12) ◽  
pp. 166
Author(s):  
Melkamu Bezabih Yitbarek ◽  
Berhan Tamir ◽  
Ashenafi Mengistu
Keyword(s):  
Soybean Meal ◽  
Carcass Characteristics ◽  
Abdominal Fat ◽  
Carcass Weight ◽  
Broiler Chicks ◽  
Fat Percentage ◽  
Carcass Yield ◽  
Treatment Groups ◽  
Significant Difference ◽  
Dressing Percentage

The experiment was conducted to evaluate the effect of dried bloodrumen content mixture (DBRCM) on carcass characteristics of broiler chicks to replace soybean meal (SBM). A total of 225 unsexed day old broiler chicks (SASSO C44) were randomly distributed to five dietary treatment groups in a completely randomized design. Each treatment was replicated thrice with 15 birds per replicate. The experimental diets were formulated to contain 100%SBM+0%DBRCM (T1), 80%SBM+20% DBRCM (T2),60%SBM+ 40% DBRCM (T3), 40%SBM+60% DBRCM(T4) and 20%SBM+80% DBRCM (T5) in 56 days of age. At the end of the experiment, two male and two female birds per replicate were used to determine carcass characteristics. The result revealed that the edible carcass yield ranged from 977.9-1159.3g. The dressing percentage based on the edible carcass weight was 63.9 % (T1), 66.6 % (T2), 65.4 (T3), 64.2% (T4) and 63.1% (T5). There was no a significant difference (P>0.05) in both edible carcass yield and its dressing percentage. The commercial carcass weight was 937.4g (T1), 984.7g (T2), 962.0g (T3), 925.0g (T4) and 833.1g (T5) and the dressing percentage was 54.9%, 56.6%, 55.3%, 53.7% and 53.7% for T1, T2, T3, T4 and T5, respectively. Significant difference (P>0.05) was not observed in commercial carcass yield and its dressing percentage among the treatment groups. There was no a statistical marked difference (P>0.05) in total nonedible offal and edible offal. Females had more (P<0.05) breast meat than that of males. The abdominal fat and abdominal fat percentage were not significantly influenced (P>0.05) by a diet containing DBRCM. However, abdominal fat and its fat percentage were higher (P<0.05) in females than males. Based on this result, it could be concluded that DBRCM can replace soybean meal up to 80% substitution level without any adverse effect on carcass characteristics.

scholarly journals Net energy and ractopamine levels for barrows weighing 70 to 100kg

2016 ◽  
Vol 46 (7) ◽  
pp. 1268-1273 ◽  
Author(s):  
Liliane Maria Piano Gonçalves ◽  
Charles Kiefer ◽  
Karina Márcia Ribeiro de Souza ◽  
Danilo Alves Marçal ◽  
Rodrigo Caetano de Abreu ◽  
...  
Keyword(s):  
Block Design ◽  
Energy Levels ◽  
Carcass Characteristics ◽  
Experimental Unit ◽  
Net Energy ◽  
Feed Conversion ◽  
Initial Weight ◽  
Randomized Block Design ◽  
Final Weight ◽  
Quantitative Characteristics

ABSTRACT: The purpose of this study was to evaluate net energy and dietary ractopamine levels for barrows weighing 70 to 100kg. The 150 pigs investigated (initial weight 70.80±3.84kg) were distributed in a randomized block design with a 5×3 factorial arrangement, comprising five levels of net energy (2,300; 2,425; 2,550; 2,675; and 2,800Kcal kg-1 of diet) and three levels of ractopamine (5, 10, and 20ppm kg-1 of diet), with five replicates, and two animals per experimental unit. No interaction (P>0.05) was observed between net energy and ractopamine levels. Increasing the dietary net energy levels led to a linear reduction in feed intake, with a linear improvement in feed conversion. Net energy levels had no observable effect (P>0.05) on weight gain, final weight, or carcass characteristics. A dietary net energy level of 2,800Kcal kg-1 can be recommended for pigs weighing 70-100kg, improving feed conversion without affecting carcass characteristics, regardless of dietary ractopamine levels. Ractopamine levels above 5ppm did not affect performance or modify the quantitative characteristics of carcasses, regardless of dietary net energy levels.

Carcass and meat quality of Bos indicus x Bos taurus and Bos taurus cattle in northern Australia

1989 ◽  
Vol 29 (6) ◽  
pp. 757 ◽  
Author(s):  
JR Wythes ◽  
WR Shorthose ◽  
RM Dodt ◽  
RF Dickinson
Keyword(s):  
Bos Taurus ◽  
Bos Indicus ◽  
Carcass Characteristics ◽  
Liver Weight ◽  
Carcass Weight ◽  
Northern Australia ◽  
Muscle Properties ◽  
Significant Difference ◽  
Access To Water ◽  
Dressing Percentage

Liveweights, carcass characteristics, bruising and muscle properties of Bos indicus x Bos taurus (BiX) and Bos taurus (Bt) cattle (1070 steers and 394 cows) were compared from 7 experiments throughout Queensland. In general, the cattle were weighed (unfasted), transported as mixed genotype groups to an abattoir and given access to water from arrival until slaughter. Access to feed varied between experiments. Mustering to slaughter periods varied from 4 to 9 days. For steers, mean liveweight at slaughter and carcass characteristics (weight, dressing percentage, liver weight and rib fat depth) were generally similar for BiX and Bt. In 1 of the 5 experiments with steers, BiX had a greater (P<0.05) mean liveweight, carcass weight, dressing percentage and liver weight. In both of the experiments with cows, BiX had greater (P<0.05) mean carcass weight but in only 1 experiment greater (P<0.05) mean liveweight and dressing percentage. There were no consistent differences between BiX and Bt in bruise score. Meat properties were compared in 1 experiment each for steers and for cows. BiX cows had a greater (P<0.05) mean initial yield(YI) shear value and tended to have a greater peak force (PF) for M. longissimus dorsi (LD) muscle than Bt cows. BiX had a lower (P<0.05) PF - IY value. Genotype had no significant effect on shear values and sarcomere length in steers or on cooking loss in steers and cows. Over all experiments, there was a higher (P<0.05) percentage of Bt than BiX carcasses ( 8.5 v. 3.7%) with high pH (> 6.0) values 24 h post mortem (pH24) for LD muscle. Genotype had no significant effect on mean pH24 and ultimate pH in cows or steers. Significantly more (P<0.05) cow than steer carcasses had high pHz4 values (10.9 v. 5.0%). In 2 experiments, more (P<0.05) heads and tongues were condemned for BiX than Bt steers, but there was no significant difference for the percentage of burst rumens. We conclude that the belief held by producers, butchers and others that BiX cattle have more bruising and produce darker meat than Bt cattle is unfounded. The overall toughness of meat from cattle slaughtered in northern Australia is of much greater concern than minor differences between genotypes.

scholarly journals Effect of heat stress on carcass and meat quality of indigenous sheep of Bangladesh

2014 ◽  
Vol 43 (2) ◽  
pp. 147-153 ◽  
Author(s):  
MS Rana ◽  
MA Hashem ◽  
S Akhter ◽  
M Habibullah ◽  
MH Islam ◽  
...  
Keyword(s):  
Heat Stress ◽  
Meat Quality ◽  
Carcass Characteristics ◽  
Muscle Area ◽  
Eye Muscle ◽  
Treatment Groups ◽  
Indigenous Sheep ◽  
Heat Treated ◽  
Significant Difference

The research was conducted to study the effect of heat stress on carcass characteristics and meat quality in indigenous sheep. Nine sheep were divided into three groups which were almost similar in age, sex and weight. Three groups were divided as zero hour (T0), four hours (T4) and eight hours (T8) heat exposure to direct sunlight. During experimental period temperature–humidity index (THI) value was calculated as 27.09 which indicated T4 and T8 groups were subjected to heat stress condition for at least four hours and eight hours respectively every day. Slaughter weight, body length and heart girth had no significant difference among the treatment groups. Dry matter, ash and ether extract had no significant difference (p>0.05) among the treatment groups but crude protein were increased with the increase of heat stress from T0 to T8 group (p<0.05). Drip loss was increased (p<0.05) in non-exposure group than treated groups but there is no significant result (p>0.05) found in pH and cooking loss. Carcass weight and eye muscle area had no significant difference (p>0.05) among the treatment groups but dressing percentage was decreased with the increase of time in heat treated groups (p<0.01). Significant difference (p<0.05) were found in weight of heart, kidney, lung + trachea and pluck between control and heat treated groups. The significant difference (p>0.05) in empty gut was found in gut with content and gut fill in heat treated groups. It can be concluded that heat stress had significant changes on carcass characteristics and meat quality of indigenous sheep.DOI: http://dx.doi.org/10.3329/bjas.v43i2.20717 Bang. J. Anim. Sci. 2014. 43 (2): 147-153

scholarly journals Effect of Different Fat Sources and Vitamin E Isoforms/Levels on Carcass Characteristics and Meat Quality of Pigs Grown to 150 Kg

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
M. Kelley ◽  
G. Rentfrow ◽  
M. Lindemann ◽  
D. Wang
Keyword(s):  
Vitamin E ◽  
Shelf Life ◽  
Meat Quality ◽  
Corn Oil ◽  
Carcass Characteristics ◽  
Tocopheryl Acetate ◽  
Drip Loss ◽  
Muscle Area ◽  
Dressing Percentage

ObjectivesThe objective was to evaluate the effect of supplementing α- and γ-tocopherol vitamin E isoforms with corn oil and tallow on carcass characteristics and meat quality of pigs grown to heavier weights (>150 kg).Materials and MethodsIndividually fed pigs (n = 72; 36 barrows, 36 gilts; 28.55 ± 1.16 kg) were randomly assigned to 12 dietary treatments in a 2 × 6 factorial arrangement. Fat treatments were tallow and corn oil (5?). The vitamin E treatments included four levels of α-tocopheryl-acetate (ATA; 11, 40, 100, and 200 ppm) and two levels of mixed tocopherols (primarily γ-tocopherol; 40 and 100 ppm). Pigs were humanely slaughtered at approximately 150 kg. 45 min pH was taken at the 10th rib. After 24 h chill (4°C), carcass measurements were taken (carcass length, backfat depth at first rib, last rib, 10th rib and last lumbar, loin muscle area, and 24 h pH at the 10th rib). In addition, wholesale weights from the Boston butt (IMPS #406), shoulder picnic (IMPS #405), loin (IMPS #412), and belly (IMPS #408) and spareribs were recorded. Furthermore, bellies were divided into eight sections and the average depth was taken at each section and the vertical and lateral belly flex was measured. Drip loss was determined by suspending a 1.3cm chop at 4°C for 48 h and purge loss was determined from approximately 2kg vacuum packaged loin muscle sections at 0, 7, 14, and 30d. Objective (Hunter Lab Colorimeter XE Plus) and subjective (NPPC color, marbling and firmness scores) measurements were taken at the 10th rib. Data analysis were performed in SAS by least squares analysis of variance using the generalized linear model as a randomized complete block design. The individual pig served as the experimental unit and results were reported as least square means.ResultsThere were no differences in dressing percentage, 24 h pH, backfat depth, loin muscle area, primal cuts, purge loss, and drip loss between the two vitamin E isoforms. Fat treatments did not affect dressing percentage, 45 min and 24 h pH, backfat depth, loin muscle area, primal cuts, purge loss, drip loss as well as objective and subjective color. Although not significant (P = 0.07), pork from the γ-tocopherol pigs had a lower pH than the ATA treatment. The γ-tocopherol supplementation tended to have a lighter subjective color (P = 0.06) as well as increased L*, decreased a*, and increased the hue angle calculations at 7d shelf-life. The belly depth was greater (P = 0.01) along with higher lateral (P < 0.01) and a lower vertical (P < 0.01) flex for pigs fed tallow.ConclusionIn conclusion, feeding tallow to heavy weight pigs (150 kg) could improve belly firmness. Also, α-tocopherol did not improve shelf-life stability and γ-tocopherol could negatively affect subject and objective pork loin color.

scholarly journals Effects of various ractopamine hydrochloride withdrawal periods on performance, health, and carcass characteristics in yearling steers

2019 ◽  
Vol 4 (1) ◽  
pp. 67-74
Author(s):  
Tony C Bryant ◽  
Josh I Szasz ◽  
Lois F G Pringle ◽  
Eddie Crispe ◽  
K Shawn Blood ◽  
...  
Keyword(s):  
Feed Efficiency ◽  
Dry Matter ◽  
Block Design ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Average Dose ◽  
Withdrawal Period ◽  
Feedlot Performance ◽  
Dressing Percentage ◽  
Ractopamine Hydrochloride

Abstract Ractopamine hydrochloride (RAC) is a β-adrenergic agonist approved for feeding during the last 28 to 42 d prior to cattle slaughter to improve feedlot performance and carcass characteristics. Three thousand crossbred yearling steers (527 ± 2.4 kg; AVG ± SD) were used in two periods to evaluate the effects of various RAC withdrawal times on feedlot performance, health, and carcass characteristics. In Period 1, 6 blocks of 30 pens totaling 1,500 steers were utilized, which was repeated for Period 2. In a randomized complete block design, cattle were assigned to 1 of 5 treatments consisting of 1) No RAC fed (CON), 2) 12-h RAC withdrawal (12-hRAC), 3) 2-d RAC withdrawal (2-dRAC), 4) 4-d RAC withdrawal (4-dRAC), and 5) 7-d RAC withdrawal (7-dRAC). Cattle were fed for a total of 62 d, and applicable treatments were supplemented with 30.0 ppm (dry matter basis) of RAC (average dose = 322 mg per steer per day) for 33 d at the end of the feeding period, corresponding to their respective withdrawal times. Initial body weight (BW) displayed a quadratic curve, with 2-dRAC and 4-dRAC withdrawal periods having the greatest BW. Accordingly, dry matter intake (DMI) responded quadratically (P = 0.034), with 2-dRAC and 4-dRAC treatments demonstrating the greatest DMI. No significant treatment differences (P ≥ 0.641) were observed in final live BW, average daily gain (ADG), or feed efficiency. Alternatively, when using a common dressing percentage to calculate live BW, cattle on RAC treatments exhibited 7.6 kg additional live BW (P &lt; 0.001) compared to CON cattle. Furthermore, carcass-adjusted ADG and feed efficiency did not differ (P &gt; 0.10) between RAC treatments but were improved compared to the CON treatment (P ≤ 0.002). Hot carcass weight (HCW) was on average 4.9 kg greater (P &lt; 0.001) for RAC treatments vs. CON, and no differences were detected (P &gt; 0.10) among RAC treatments. Within RAC treatments, carcass cutability responded quadratically (P ≤ 0.005) to withdrawal period, with the 2-dRAC and 4-dRAC treatments containing more Yield Grade 4 and 5 and fewer Yield Grade 1 and 2 carcasses than the other RAC treatments. On the basis of the results of this experiment, feeding RAC improves dressing percentage, HCW, and carcass-adjusted BW, ADG, and feed efficiency. Furthermore, extending the RAC withdrawal period to 7 d does not have a significant impact on cattle performance or health and has minimal effects on carcass characteristics.

scholarly journals Carcass and non-carcass component characteristics of lambs fed with cassava wastewater dregs in replacement of corn

2016 ◽  
Vol 37 (4Supl1) ◽  
pp. 2711 ◽  
Author(s):  
Daniel Barros Cardoso ◽  
Robson Magno Liberal Véras ◽  
Francisco Fernando Ramos de Carvalho ◽  
André Luiz Rodrigues Magalhães ◽  
Gustavo Araújo de Vasconcelos ◽  
...  
Keyword(s):  
Body Weight ◽  
Block Design ◽  
Carcass Characteristics ◽  
Linear Increase ◽  
Carcass Weight ◽  
Replacement Level ◽  
Randomized Block Design ◽  
Feedlot Lambs ◽  
Retail Cuts ◽  
Cassava Wastewater

The objective was to evaluate the effect of the substitution (0, 33, 66 and 100%) of corn by cassava wastewater dregs on carcass characteristics and non-carcass components of crossbred Santa Inês lambs. Forty male sheep, uncastrated with an average initial body weight of 20 ± 1.87 kg and five months of age, were used. These were housed in individual pens in a randomized block design with four treatments and ten repetitions and slaughtered after 70 days of confinement. Quadratic effect (P &lt; 0.05) was observed for the empty body weight (EBW), hot carcass weight (HCW) and cold carcass weight (CCW) and carcass compactness index (CCI), with maximum points of 36.14, 19.45, 20.20 and 0.31 kg cm-1 for the replacement level of corn for cassava wastewater dregs, 50.0, 53.84, 54.04 and 45.45% respectively. There was also an effect (P &lt; 0.05) on the weights of the rumen and “Buchada”, with maximum points of 0.909 and 6.25 kg per replacement level, 49.11 and 51.29% respectively. As for retail cuts, only the efficiency of the leg was altered (P &lt; 0.05), having a linear increase while the other variables were not affected. Cassava wastewater dregs can be used in full as an alternative food in the diet of feedlot lambs without harming the main carcass characteristics and non-carcass components.

scholarly journals PSX-29 Levels of hay and narasin inclusion on carcass characteristics and meat composition

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 455-455
Author(s):  
Lairana A Sardinha ◽  
Daniel M Polizel ◽  
Alexandre A Miszura ◽  
Arnaldo C Limede ◽  
José P R Barroso ◽  
...  
Keyword(s):  
Body Weight ◽  
Block Design ◽  
Carcass Characteristics ◽  
Ash Content ◽  
Carcass Weight ◽  
Initial Body Weight ◽  
Composition Data ◽  
Meat Composition ◽  
Randomized Complete Block Design ◽  
Different Levels

Abstract The objective of this study was to determinate the effects of narasin on carcass characteristics of lambs fed a diet containing different levels. Forty-four lambs were allotted in a randomized complete block design, defined by initial body weight (BW), in a 2x2 factorial arrangement. The first factor was forage (coastcross hay) inclusion (10 or 20%, DM basis) and the second factor was narasin (0 or 13 ppm). The experimental diets were isonitrogenous (17.4%, DM basis). The experiment lasted 112 days. At the end of the experiment, the lambs were slaughtered to evaluate the carcass characteristics and meat composition. Data were analyzed using the MIXED procedure of SAS and the LSMEANS option was used to obtain the means. The effects were considered significant when P &lt; 0.05. There was no interaction between forage levels and narasin inclusion. The experimental diets did not affect the slaughter BW (54.8 ± 1.6 kg), hot carcass weight (29.3 ± 0.96 kg), dressing percentage (53.5 ± 0.67%) and LM area (18.8 ± 0.89 cm2). The inclusion of narasin increased 12th-rib fat (2.10 vs 2.75 mm; P &lt; 0.01) and BW thickness (16.9 vs 20.2 mm; P &lt; 0.01). The inclusion of 20% of hay decreased BW thickness (19.21 vs 17.9 mm; P = 0.03). The experimental diets did not affect the moisture (74.2 ± 0.53%) and ash content in meat (1.27 ± 0.04%). Narasin inclusion increased the fat (2.81 vs 3.62%; P &lt; 0.01) and decreased the CP (21.3 vs 20.7%; P = 0.02) in meat composition. The inclusion of 10% of hay increased the fat in meat (3.5 vs 2.9%; P = 0.03), however, did not affect the CP content. In conclusion, the narasin inclusion and levels of hay improve the carcass characteristics and change the meat composition.

Sign in / Sign up

Export Citation Format

Share Document