scholarly journals EFFECTS OF IMAGE SIZE AND SAMPLE AREAS ON COMPARISON OF CONTACT LENS SURFACES BASED ON FRACTAL DIMENSION

2013 ◽  
Vol 4 (1) ◽  
Author(s):  
Božica Bojović
Keyword(s):  
Fractal Dimension ◽  
Image Resolution ◽  
Image Size ◽  
Imaging Device ◽  
Sample Area ◽  
Fractal Properties ◽  
The One ◽  
Near Future ◽  
Selection Of ◽  
Made In

Methods used for calculation of fractal dimension demand large image resolution and adequate sample size, in terms of roughness threshold that defines spatial scope for rough surface fractal properties. Imaging device operators, on the one hand, recommend the image size and sample area based on experience and expertise, in order to minimize the imaging time. On the other hand, engineers make decisions based on their own requirements. To overcome these problems, in this paper we used ANOVA statistical approach (one-way and multi comparison) so as to establish significant image size and sample area. The conclusion made in this paper will enable decision guidelines on selection of parameters for new nanophotonic lenses imaging by scanning microscopes in near future.

scholarly journals Sraffa and his Theoretical Revolution

2018 ◽  
pp. 367-421
Keyword(s):  
Economic Analysis ◽  
Joint Production ◽  
Ideal Model ◽  
Goods And Services ◽  
Palabras Clave ◽  
El Sistema ◽  
The One ◽  
Selection Of ◽  
Made In ◽  
The Ideal

Abstract.-This article attempts to demonstrate that the work of Piero Sraffa –especially Production of commodities by means of commodities-is the greatest revolution in economic analysis. The novelties introduced by the Italian economist, against all classical and marginalist traditions, such as considering the surplus of reproducible goods as the object of the economy, the intersectoral relations between goods and services on the one hand and processes on the other, the prices formed as a margin on costs, reduction of capital to dated work, the selection of techniques and the considerations about of the joint production support the above statements. To this we can add other more questionable or more or less significant as the standard system, its theory of fixed capital, the considerations on land and mines, the differentiation between basic and non-basic goods. Some of these analyzes have precedents or are contemporaries (physiocracy, Ricardo, Leontief), but the whole of them supposes this revolution made in the economic analysis and supposes for this the ideal model to be candidate to base any economic analysis worthy of such name. Keywords: Sraffa, economic analysis, theoritical revolution Resumen.-En este artículo se intenta demostrar que la obra de Piero Sraffa –en especial Producción de mercancías por medio de mercancías- supone la mayor revolución del análisis económico. Las novedades introducidas por el economista italiano contra toda tradición clásica y marginalista tales como considerar el excedente de los bienes reproducibles como objeto de la economía, las relaciones intersectoriales entre bienes y servicios por un lado y procesos por otro, los precios formados como un margen sobre los costes, la reducción del capital a trabajo fechado, la elección de las técnicas y las consideraciones sobre la producción conjunta avalan las afirmaciones anteriores. A ello le añadimos otras más discutibles o más o menos significativas como el sistema patrón, su teoría del capital fijo, las consideraciones sobre la tierra y las minas, la diferenciación entre bienes básicos y no básicos. Algunos de estos análisis tienen precedentes o son coetáneos (fisiocracia, Ricardo, Leontief), pero el conjunto de ellos supone esa revolución que hace del análisis económico de Sraffa como el modelo idóneo para ser candidato a fundamentar cualquier análisis económico digno de tal nombre. Palabras clave: Sraffa, análisis económico, revolución teórica

Note on Selection of Coordinate Systems for Geodynamics

1975 ◽  
Vol 26 ◽  
pp. 395-407
Author(s):  
S. Henriksen
Keyword(s):  
Sea Level ◽  
The Other ◽  
Coordinate Systems ◽  
Mean Sea Level ◽  
The Earth ◽  
The One ◽  
Static Systems ◽  
Selection Of

The first question to be answered, in seeking coordinate systems for geodynamics, is: what is geodynamics? The answer is, of course, that geodynamics is that part of geophysics which is concerned with movements of the Earth, as opposed to geostatics which is the physics of the stationary Earth. But as far as we know, there is no stationary Earth – epur sic monere. So geodynamics is actually coextensive with geophysics, and coordinate systems suitable for the one should be suitable for the other. At the present time, there are not many coordinate systems, if any, that can be identified with a static Earth. Certainly the only coordinate of aeronomic (atmospheric) interest is the height, and this is usually either as geodynamic height or as pressure. In oceanology, the most important coordinate is depth, and this, like heights in the atmosphere, is expressed as metric depth from mean sea level, as geodynamic depth, or as pressure. Only for the earth do we find “static” systems in use, ana even here there is real question as to whether the systems are dynamic or static. So it would seem that our answer to the question, of what kind, of coordinate systems are we seeking, must be that we are looking for the same systems as are used in geophysics, and these systems are dynamic in nature already – that is, their definition involvestime.

Costumes and Choreography from Bodenwieser's Trunk: The Coat as Affective Memory

2019 ◽  
Vol 37 (1) ◽  
pp. 89-110
Author(s):  
Rachel Fensham
Keyword(s):  
Modern Dance ◽  
Human Condition ◽  
Personal Life ◽  
Creative Thought ◽  
Cain And Abel ◽  
Embodied Research ◽  
The Many ◽  
The One ◽  
Material Evidence ◽  
Selection Of

The Viennese modern choreographer Gertrud Bodenwieser's black coat leads to an analysis of her choreography in four main phases – the early European career; the rise of Nazism; war's brutality; and postwar attempts at reconciliation. Utilising archival and embodied research, the article focuses on a selection of Bodenwieser costumes that survived her journey from Vienna, or were remade in Australia, and their role in the dramaturgy of works such as Swinging Bells (1926), The Masks of Lucifer (1936, 1944), Cain and Abel (1940) and The One and the Many (1946). In addition to dance history, costume studies provides a distinctive way to engage with the question of what remains of performance, and what survives of the historical conditions and experience of modern dance-drama. Throughout, Hannah Arendt's book The Human Condition (1958) provides a critical guide to the acts of reconstruction undertaken by Bodenwieser as an émigré choreographer in the practice of her craft, and its ‘materializing reification’ of creative thought. As a study in affective memory, information regarding Bodenwieser's personal life becomes interwoven with the author's response to the material evidence of costumes, oral histories and documents located in various Australian archives. By resurrecting the ‘dead letters’ of this choreography, the article therefore considers how dance costumes offer the trace of an artistic resistance to totalitarianism.

Simulation of the internal temperature in the Passol Laboratory, University of Debrecen

2012 ◽  
Vol 3 (1) ◽  
pp. 63-73 ◽  
Author(s):  
I. Csáky ◽  
F. Kalmár
Keyword(s):  
Temperature Variation ◽  
Air Temperature ◽  
Indoor Air ◽  
Storage Capacity ◽  
Building Structures ◽  
Internal Temperature ◽  
The One ◽  
Heavy Structure ◽  
East West ◽  
Made In

Abstract Nowadays the facades of newly built buildings have significant glazed surfaces. The solar gains in these buildings can produce discomfort caused by direct solar radiation on the one hand and by the higher indoor air temperature on the other hand. The amplitude of the indoor air temperature variation depends on the glazed area, orientation of the facade and heat storage capacity of the building. This paper presents the results of a simulation, which were made in the Passol Laboratory of University of Debrecen in order to define the internal temperature variation. The simulation proved that the highest amplitudes of the internal temperature are obtained for East orientation of the facade. The upper acceptable limit of the internal air temperature is exceeded for each analyzed orientation: North, South, East, West. Comparing different building structures, according to the obtained results, in case of the heavy structure more cooling hours are obtained, but the energy consumption for cooling is lower.

WINTER WHEAT DEVELOPED BY THE UDMURT RESEARCH INSTITUTE OF AGRICULTURE IN COMPETITIVE VARIETY TESTING

2020 ◽  
pp. 5-16
Author(s):  
I.V. TORBINA ◽  
◽  
I.R. FARDEYEVA ◽  
Keyword(s):  
Winter Wheat ◽  
Crop Rotation ◽  
Biological Characteristics ◽  
Commercial Use ◽  
Breeding Material ◽  
Rotation Pattern ◽  
Selection Of ◽  
Variety Testing ◽  
Made In ◽  
Research Institute

The paper assesses the promising varieties of winter wheat in a competitive variety test by the main economic and biological characteristics that determine the suitability of the variety for commercial use. The object of research was the authors’ own breeding material. The experiments on the selection of winter wheat were made in the experimental crop rotation pattern of the Institute.

Modelling Techniques in Applied Glaciology: Numerical Modelling of Avalanches

1983 ◽  
Vol 4 ◽  
pp. 297-297
Author(s):  
G. Brugnot
Keyword(s):  
Finite Difference Method ◽  
Transverse Velocity ◽  
Longitudinal Velocity ◽  
Momentum Conservation ◽  
Dimensional Model ◽  
One Dimensional ◽  
Modelling Techniques ◽  
Reference Grid ◽  
The One ◽  
Near Future

We consider the paper by Brugnot and Pochat (1981), which describes a one-dimensional model applied to a snow avalanche. The main advance made here is the introduction of the second dimension in the runout zone. Indeed, in the channelled course, we still use the one-dimensional model, but, when the avalanche spreads before stopping, we apply a (x, y) grid on the ground and six equations have to be solved: (1) for the avalanche body, one equation for continuity and two equations for momentum conservation, and (2) at the front, one equation for continuity and two equations for momentum conservation. We suppose the front to be a mobile jump, with longitudinal velocity varying more rapidly than transverse velocity.We solve these equations by a finite difference method. This involves many topological problems, due to the actual position of the front, which is defined by its intersection with the reference grid (SI, YJ). In the near future our two directions of research will be testing the code on actual avalanches and improving it by trying to make it cheaper without impairing its accuracy.

Evidence-based Assessment

2010 ◽  
pp. 76-98
Author(s):  
John Hunsley ◽  
Eric J. Mash
Keyword(s):  
Decision Making ◽  
Clinical Assessment ◽  
Assessment Process ◽  
Evidence Based ◽  
The Past ◽  
Specific Assessment ◽  
The Many ◽  
Selection Of ◽  
Made In

Evidence-based assessment relies on research and theory to inform the selection of constructs to be assessed for a specific assessment purpose, the methods and measures to be used in the assessment, and the manner in which the assessment process unfolds. An evidence-based approach to clinical assessment necessitates the recognition that, even when evidence-based instruments are used, the assessment process is a decision-making task in which hypotheses must be iteratively formulated and tested. In this chapter, we review (a) the progress that has been made in developing an evidence-based approach to clinical assessment in the past decade and (b) the many challenges that lie ahead if clinical assessment is to be truly evidence-based.

scholarly journals Simultaneity and Precise Time in Rotation

Universe ◽  
2019 ◽  
Vol 5 (12) ◽  
pp. 226 ◽  
Author(s):  
Don Koks
Keyword(s):  
Time Coordinate ◽  
Near Future ◽  
Precise Time ◽  
Made In

I analyse the role of simultaneity in relativistic rotation by building incrementally on its role in simpler scenarios. Historically, rotation has been analysed in 1 + 1 dimensions; but my stance is that a 2 + 1 -dimensional treatment is necessary. This treatment requires a discussion of what constitutes a frame, how coordinate choices differ from frame choices, and how poor coordinates can be misleading. I determine how precisely we are able to define a meaningful time coordinate on a gravity-free rotating Earth, and discuss complications due to gravity on our real Earth. I end with a critique of several statements made in relativistic precision-timing literature, that I maintain contradict the tenets of relativity. Those statements tend to be made in the context of satellite-based navigation; but they are independent of that technology, and hence are not validated by its success. I suggest that if relativistic precision-timing adheres to such analyses, our civilian timing is likely to suffer in the near future as clocks become ever more precise.

PROMETHEE-based ranking of project managers based on the five personality traits

Kybernetes ◽  
2019 ◽  
Vol 49 (4) ◽  
pp. 1083-1102
Author(s):  
Georgios N. Aretoulis ◽  
Jason Papathanasiou ◽  
Fani Antoniou
Keyword(s):  
Personality Traits ◽  
Questionnaire Survey ◽  
Multicriteria Decision Making ◽  
Project Managers ◽  
Preference Ranking ◽  
Infrastructure Projects ◽  
Public Infrastructure ◽  
Content Type ◽  
The One ◽  
Selection Of

Purpose This paper aims to rank and identify the most efficient project managers (PMs) based on personality traits, using Preference Ranking Organization METHod for Enrichment Evaluations (PROMETHEE) methodology. Design/methodology/approach The proposed methodology relies on the five personality traits. These were used as the selection criteria. A questionnaire survey among 82 experienced engineers was used to estimate the required weights per personality trait. A second two-part questionnaire survey aimed at recording the PMs profile and assess the performance of personality traits per PM. PMs with the most years of experience are selected to be ranked through Visual PROMETHEE. Findings The findings suggest that a competent PM is the one that scores low on the “Neuroticism” trait and high especially on the “Conscientiousness” trait. Research limitations/implications The research applied a psychometric test specifically designed for Greek people. Furthermore, the proposed methodology is based on the personality characteristics to rank the PMs and does not consider the technical skills. Furthermore, the type of project is not considered in the process of ranking PMs. Practical implications The findings could contribute in the selection of the best PM that maximizes the project team’s performance. Social implications Improved project team communication and collaboration leading to improved project performance through better communication and collaboration. This is an additional benefit for the society, especially in the delivery of public infrastructure projects. A lot of public infrastructure projects deviate largely as far as cost and schedule is concerned and this is an additional burden for public and society. Proper project management through efficient PMs would save people’s money and time. Originality/value Identification of the best PMbased on a combination of multicriteria decision-making and psychometric tests, which focus on personality traits.

scholarly journals Theoretical Modelling of Ion Exchange Processes in Glass: Advances and Challenges

2021 ◽  
Vol 11 (11) ◽  
pp. 5070
Author(s):  
Xesús Prieto-Blanco ◽  
Carlos Montero-Orille
Keyword(s):  
Ion Exchange ◽  
Diffusion Coefficients ◽  
Molten Salts ◽  
Theoretical Modelling ◽  
Copper Films ◽  
Theoretical Frameworks ◽  
Self Diffusion ◽  
Exchange Processes ◽  
The One ◽  
Made In

In the last few years, some advances have been made in the theoretical modelling of ion exchange processes in glass. On the one hand, the equations that describe the evolution of the cation concentration were rewritten in a more rigorous manner. This was made into two theoretical frameworks. In the first one, the self-diffusion coefficients were assumed to be constant, whereas, in the second one, a more realistic cation behaviour was considered by taking into account the so-called mixed ion effect. Along with these equations, the boundary conditions for the usual ion exchange processes from molten salts, silver and copper films and metallic cathodes were accordingly established. On the other hand, the modelling of some ion exchange processes that have attracted a great deal of attention in recent years, including glass poling, electro-diffusion of multivalent metals and the formation/dissolution of silver nanoparticles, has been addressed. In such processes, the usual approximations that are made in ion exchange modelling are not always valid. An overview of the progress made and the remaining challenges in the modelling of these unique processes is provided at the end of this review.

Sign in / Sign up

Export Citation Format

Share Document