scholarly journals Improving the physical, mechanical and energetic properties of Quercus spp. wood pellets by adding pine sawdust

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e9766
Author(s):  
Víctor Daniel Núñez-Retana ◽  
Rigoberto Rosales-Serna ◽  
José Ángel Prieto-Ruíz ◽  
Christian Wehenkel ◽  
Artemio Carrillo-Parra
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Particle Density ◽  
Resistance Index ◽  
Calorific Value ◽  
Ash Content ◽  
Wood Pellets ◽  
Pine Sawdust ◽  
Mechanical Hardness ◽  
Species Mixture

Background Biomass usage for energy purposes has emerged in response to global energy demands and environmental problems. The large amounts of by-products generated during logging are rarely utilized. In addition, some species (e.g., Quercus spp.) are considered less valuable and are left in the cutting areas. Production of pellets from this alternative source of biomass may be possible for power generation. Although the pellets may be of lower quality than other types of wood pellets, because of their physical and technological properties, the addition of different raw materials may improve the characteristics of the oak pellets. Methods Sawdust from the oak species Quercus sideroxyla, Q. rugosa, Q. laeta and Q. conzattii was mixed with sawdust from the pine Pinus durangensis in different ratios of oak to pine (100:0, 80:20, 60:40, 40:60 and 20:80). Physical and mechanical properties of the pellets were determined, and calorific value tests were carried out. For each variable, Kolmogorov–Smirnov normality and Kruskal–Wallis tests were performed and Pearson’s correlation coefficients were determined (considering a significance level of p < 0.05). Results The moisture content and fixed carbon content differed significantly (p < 0.05) between the groups of pellets (i.e., pellets made with different sawdust mixtures). The moisture content of all pellets was less than 10%. However, volatile matter and ash content did not differ significantly between groups (p ≥ 0.05). The ash content was less than 0.7% in all mixtures. The addition of P. durangensis sawdust to the mixtures improved the bulk density of the pellets by 18%. Significant differences (p < 0.05) in particle density were observed between species, mixtures and for the species × mixture interaction. The particle density was highest in the 80:20 and 60:40 mixtures, with values ranging from 1,245 to 1,349 kg m−3. Bulk density and particle density of the pellets were positively correlated with the amount of P. durangensis sawdust included. The mechanical hardness and impact resistance index (IRI) differed significantly (p < 0.05) between groups. The addition of pine sawdust decreased the mechanical hardness of the pellets, up to 24%. The IRI was highest (138) in the Q. sideroxyla pellets (100:0). The mechanical hardness and IRI of the pellets were negatively correlated with the amount of P. durangensis sawdust added. The bulk density of the pellets was negatively correlated with mechanical hardness and IRI. The calorific value of mixtures and the species × mixture interaction differed significantly between groups. Finally, the mean calorific value was highest (19.8 MJ kg−1) in the 20:80 mixture. The calorific value was positively related to the addition of P. durangensis sawdust.

scholarly journals The quality of pellets available on the market in Latvia: classification according en 14961 requirements

2012 ◽  
Vol 8 (-1) ◽  
pp. 36-40
Author(s):  
Vladimirs Kirsanovs ◽  
Lelde Timma ◽  
Aivars Zandeckis ◽  
Francesco Romagnoli
Keyword(s):  
Quality Control ◽  
Control System ◽  
Bulk Density ◽  
Calorific Value ◽  
Ash Content ◽  
Quality Control System ◽  
European Standard ◽  
Wood Pellets ◽  
Mechanical Durability

Abstract The objectives of the paper are to determine the quality of pellets available on the market in Latvia and to compare results with the European standard EN 14961-2:2011. The following parameters have been determined for samples of pellets: length, diameter, moisture and ash content, mechanical durability, lower calorific value and bulk density. The results showed that all samples confirm to the B class requirements of the standard. If one considers the A1 class - only 4 out of 9 samples fit the requirements. The paper emphasizes the need for the introduction of a quality control system for the wood pellets market in Latvia.

scholarly journals EVALUATION OF GIANT KNOTWEED AND MISCANTHUS AS PERSPECTIVE ENERGY PLANTS AND ASSESSMENT OF PRODUCED BIOFUEL QUALITY INDICATORS

2018 ◽  
Author(s):  
Dionizas STREIKUS ◽  
Algirdas JASINSKAS ◽  
Rolandas DOMEIKA ◽  
Sigitas ČEKANAUSKAS ◽  
Nerijus PEDIŠIUS ◽  
...  
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Quality Indicators ◽  
Slope Angle ◽  
Calorific Value ◽  
Ash Content ◽  
Miscanthus Sinensis ◽  
Forest Environment ◽  
Natural Slope ◽  
Giant Knotweed

Giant knotweed (Fallopia sachalinensis) was chosen as a perspective energy plant because it is not a soil demanding plant and belongs to the most efficient herbs in Central Europe as regards high biomass yield. Miscanthus (Miscanthus sinensis) was chosen as a control one. Knotweeds are comparable to wood briquettes and pellets because of their similarparallel mechanical and thermal features. These plants grow in forest environment with an approximate yield productivity of 15 t ha-1 d.b. (dry basis). Experimental research investigations were performed in the laboratories of Aleksandras Stulginskis University. Giant knotweed and miscanthus biomass was cut, chopped, milled and granulated with a small capacity granulator (250–300 kg h-1). Quality parameters of plant preparative and use for energetical objectives were determined. Plant chaff and mill fraction compositions were determined, and quality indicators of the produced pellets were measured – moisture content, density, resistance to compression, elemental composition, ash content and calorific value, also bulk density, fall and natural slope angles. Moisture content reached 7.8 ± 0.8 %; pellet density was 1227.3 ± 48.6 kg m-3. Resistance to compression of giant knotweed pellet was 850 N. Determined ash content was 4.3 ± 0.01 %, and net calorific value of knotweed dry mass was of sufficient height and reached 18.96 ± 0.28 MJ kg-1. Bulk density reached 509.9 kg m-3, natural slope angle was 31.7 0 and fall angle was 49.3 0.

SIFAT FISIK DAN KIMIA WOOD PELLET DARI LIMBAH INDUSTRI PERKAYUAN SEBAGAI SUMBER ENERGI ALTERNATIF

2014 ◽  
Vol 6 (1) ◽  
pp. 1
Author(s):  
Effendi Arsad
Keyword(s):  
Moisture Content ◽  
Heating Temperature ◽  
Calorific Value ◽  
Ash Content ◽  
Heating Effect ◽  
Wood Pellets ◽  
Wood Pellet ◽  
Waste Wood ◽  
Industrial Processing ◽  
Higher Temperature

Carakteristic physical and chemistry of Wood pellet from Industrial Disposal of Wood as Sources  Energy Alternatif The research to gaved for physical and chemistry of Wood pellet from Industrial. Processing approximately 12%, sawdust dried to moisture content of  sieved that is size of 15 mesh, 25 mesh and 35 mesh. Heating temperature were 60 0C and 110 0C. Moisture content of flawer wood pellet 4,46% - 9,95%, acacia wood pellet were 4.38% - 7.52% and tarap wood pellet were  4.60% - 9.98%. Density of flawer  wood pellet  were 0.51 - 0.78, acacia wood pellet were 0.61 - 0.78 and tarap wood pellet were   0.56 - 0.71, ash content of wood  flawer  from 0.87 - 2.04%, acacia 0.54 - 0.94% and ash content of  tarap wood 1.71 - 2.05%. Calorific value of wood pellets flawers wood 3921,12 - 4150,19 cal/g, acacia wood 4022,29 - 4254,91 cal/g and tarap wood  3920,13 - 4125,28 cal/g. The higher temperature of the heating effect on reality the reduction of water and the weight of ash wood pellets  while it was increasing calorific value.Keywords: waste wood, flawers wood, acacia wood, tarap wood, wood pellet

scholarly journals Comparative Study of the Properties of Wood Flour and Wood Pellets Manufactured from Secondary Processing Mill Residues

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2487
Author(s):  
Geeta Pokhrel ◽  
Yousoo Han ◽  
Douglas J. Gardner
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Raw Materials ◽  
Wood Flour ◽  
The United States ◽  
Red Maple ◽  
Wood Pellets ◽  
Secondary Processing ◽  
Material Costs ◽  
Mill Residues

The generation of secondary processing mill residues from wood processing facilities is extensive in the United States. Wood flour can be manufactured utilizing these residues and an important application of wood flour is as a filler in the wood–plastic composites (WPCs). Scientific research on wood flour production from mill residues is limited. One of the greatest costs involved in the supply chain of WPCs manufacturing is the transportation cost. Wood flour, constrained by low bulk densities, is commonly transported by truck trailers without attaining allowable weight limits. Because of this, shipping costs often exceed the material costs, consequently increasing raw material costs for WPC manufacturers and the price of finished products. A bulk density study of wood flour (190–220 kg/m3) and wood pellets (700–750 kg/m3) shows that a tractor-trailer can carry more than three times the weight of pellets compared to flour. Thus, this study focuses on exploring the utilization of mill residues from four wood species in Maine to produce raw materials for manufacturing WPCs. Two types of raw materials for the manufacture of WPCs, i.e., wood flour and wood pellets, were produced and a study of their properties was performed. At the species level, red maple 40-mesh wood flour had the highest bulk density and lowest moisture content. Spruce-fir wood flour particles were the finest (dgw of 0.18 mm). For all species, the 18–40 wood flour mesh size possessed the highest aspect ratio. Similarly, on average, wood pellets manufactured from 40-mesh particles had a lower moisture content, higher bulk density, and better durability than the pellets from unsieved wood flour. Red maple pellets had the lowest moisture content (0.12%) and the highest bulk density (738 kg/m3). The results concluded that the processing of residues into wood flour and then into pellets reduced the moisture content by 76.8% and increased the bulk density by 747%. These material property parameters are an important attempt to provide information that can facilitate the more cost-efficient transport of wood residue feedstocks over longer distances.

scholarly journals Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2249-2263
Author(s):  
María Alejandra Ramírez-Ramírez ◽  
Artemio Carrillo-Parra ◽  
Faustino Ruíz-Aquino ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Impact Resistance ◽  
Resistance Index ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
Volumetric Expansion ◽  
Pinus Spp ◽  
The Impact

This research characterized briquettes made with Pinus spp. sawdust without the use of additives. For this purpose, 19 samples of sawdust from different wood industries located in five states of the Mexican Republic were used. The densification process was carried out in a vertical hydraulic piston laboratory briquette machine. The briquettes were made with 40 g of sawdust, at 50 °C, 20 kPa and pressing for 5 min. The results obtained varied as follows: moisture content (4.1% to 7.2%), density (813.9 to 1,014.4 kg/m3), volumetric expansion (7.4% to 37.3%), compressive strength (4.9 to 40.8 N/mm), impact resistance index (46.7% to 200%), ash (0.1% to 1.1%), volatile matter (82.9% to 90.7%), fixed carbon (8.9% to 16.4%), and calorific value (20.5 to 22.8 MJ/kg). The density of the briquettes was within the “acceptable” classification (800 to 1,200 kg/m3). It was observed that, the higher the density, the lower the volumetric expansion, the higher the compressive strength, and the higher the impact resistance index. According to the ash content, the briquettes could achieve international quality. Due to high volatile matter values, rapid combustion of the briquettes with little generation of toxic smoke would be expected. Fixed carbon and calorific value results were acceptable.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

scholarly journals Basic chemical composition of Pinus spp. sawdust from five regions of Mexico, for bioenergetic purposes

BioResources ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 816-824
Author(s):  
Jonathan Sergio Chávez-Rosales ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
Rocio Orihuela-Equihua ◽  
Faustino Ruiz-Aquino ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Calorific Value ◽  
Ash Content ◽  
Nuevo Leon ◽  
Pine Sawdust ◽  
Solid Biofuels ◽  
Nuevo León ◽  
Forest Industries ◽  
Total Extractives ◽  
Pinus Spp

The basic chemical composition and calorific value of 19 samples of pine sawdust from different forest industries located in five states of the Mexican Republic (Chihuahua, Michoacán, Durango, Oaxaca, and Nuevo León) were determined. The results obtained ranged as follows: total extractives (6.1% to 23.4%), holocellulose (60.1% to 70.4%), lignin (20.5% to 25.8%), ash (0.27% to 0.95%), pH (4.1 to 5.3), and calorific value (20.1 MJ/kg to 21.0 MJ/kg). Except for the ash content, significant statistical differences were found according to the origin of the pine sawdust samples. Based on the results obtained, the sawdust biomass has the potential to obtain densified solid biofuels.

scholarly journals Energy Resource of Charcoals Derived from Some Tropical Fruits Nuts Shells

2019 ◽  
Vol 9 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Damgou Mani Kongnine ◽  
Pali Kpelou ◽  
N’Gissa Attah ◽  
Saboilliè Kombate ◽  
Essowè Mouzou ◽  
...  
Keyword(s):  
Bulk Density ◽  
Alternative Fuels ◽  
Unit Volume ◽  
Calorific Value ◽  
Ash Content ◽  
Maximum Temperature ◽  
Tropical Fruits ◽  
Teak Wood ◽  
Sulfide Content ◽  
Coconut Shells

This work was focused on carbonizing four tropical fruits shells wastes such as: coconut shells (CS), palmyra shells (PS), doum palm shells (DPS), whole fruit of doum palm (WFDP) and teak wood (TW) used as control. The aim was to investigate the potential of those biochar to be used as an alternative energy source in replacement ofcharcoal. The raw biomasses samples were carbonized under the same conditions and some combustion characteristics of the obtained biochar such as lower calorific value, energy per unit volume associated to bulk density, ash content, moisture content and ash mineral content were investigated. The temperature in the furnace was estimated during carbonization process using a K-type thermocouple. The thermal profile of the studied raw biomasses reveals three phases of carbonization. The biochar yield drops significantly for all biomasses as the final maximum temperature increases. The average yields obtained ranged from 37.81 % for palmyra shells to 27.57 % for the doum palm shells. The highest yield achieved was 42.32 % obtained at 280 °C for palmyra shells, the lowest yield (24.42 %) was recorded at the highest maximum temperature of 590 ° C for doum palm shells. The results of energy parameters of the studied biochar showed that coconut shells charcoal presented the highest lower calorific value (28.059 MJ.kg-1), followed by doum palm shells (26.929 MJ.kg-1) when, with 25.864 MJ.kg-1, whole fruit of doum palm charcoal showed the lowest lower calorific value. Similarly, with the highest bulk density of 0.625 g/cm3 coconut shells charcoal presented the highest energy per unit volume (17536.88 J/cm3), whereas with the lowest bulk density of 0.415 g/cm3, whole fruit of doum palm charcoal presented the lowest energy per unit volume. The ash content analysis showed that whole fruit of doum palm had the highest ash content (18.75 %) and palmyra nut shells charcoal (8.42 %).Teak wood charcoal, took as control, has the highest lower calorific value (32.163 MJ.kg-1), less dense as coconut shell (0.43 g/cm3), his energy per unit of volume is 13830.09 j/cm3 but the lowest value of as content (2.90 %). Among these biomasses charcoals, only whole fruit of doum palm charcoal ash showed a high chloride and sulfide content respectively  9.73 % and 1.75 % in weight. From these results, the produced charcoals could be used as alternative fuels except for whole fruits of doum palm charcoal which chloride and sulfide content were found high. ©2020. CBIORE-IJRED. All rights reserved

scholarly journals CARACTERIZAÇÃO DE BIOMASSAS PARA A BRIQUETAGEM

FLORESTA ◽  
2015 ◽  
Vol 45 (4) ◽  
pp. 713 ◽  
Author(s):  
Diego Aleixo Silva ◽  
Gabriela Tami Nakashima ◽  
João Lúcio Barros ◽  
Alessandra Luzia Da Roz ◽  
Fabio Minoru Yamaji
Keyword(s):  
Particle Size ◽  
Moisture Content ◽  
Sugarcane Bagasse ◽  
Saccharum Officinarum ◽  
Ash Content ◽  
Heating Value ◽  
Pine Sawdust ◽  
High Heating Value ◽  
Sugarcane Straw ◽  
High Heating

O objetivo deste trabalho foi caracterizar a produção de briquetes feita a partir de quatro diferentes biomassas residuais. Foram utilizados os resíduos de serragem de Eucalyptus sp, serragem de Pinus sp, bagaço de cana-de-açúcar (Saccharum officinarum L.) e palha de cana-de-açúcar. Os resíduos foram tratados para que obtivessem 12% de umidade e uma granulometria inferior a 1,70 mm. Foram produzidos 15 briquetes para cada um dos quatro tratamentos. A pressão utilizada foi de 1250 kgf.cm-2 durante 30 segundos. Os briquetes obtiveram densidades que oscilaram 0,88 a 1,11 g.cm-3. Isto representou uma faixa de 5 a 14 vezes a menos de ocupação de volume para uma mesma quantidade de massa. O poder calorifico foi de 19.180 J.kg-1 e 20.315 J.kg-1 para as serragens de eucalipto e pinus respectivamente. Para o bagaço e palha de cana os valores foram de 18.541 J.kg-1 e 15.628 J.kg-1. A palha da cana-de-açúcar apresentou um teor de cinzas de 12%. As expansões dos tratamentos oscilaram 4 a 9% e as resistências mecânicas variaram de 1,215 MPa à 0,270 MPa. Todos os briquetes se mostraram resistentes para um empilhamento superior a 10 m de altura. O procedimento adotado pode ajudar a diminuir o espaço de estocagem e de transporte. AbstractThis research aims to characterize the production of briquettes from four different biomasses. We used residues such as Eucalyptus sp sawdust, Pinus sp sawdust , sugarcane bagasse (Saccharum officinarum L.) and sugarcane straw. The residues were treated to obtain 12% moisture content and particle size less than 1.70 mm. We produced 15 briquettes for each treatment. The pressure used was 1250 kgf.cm-2 for 30 seconds. The briquettes obtained densities ranged from 0.88 to 1.11 g.cm-3. This represented a range of 5 to 14 times less volume occupancy for the same amount of mass. The high heating value (HHV) was 19,180 J.kg-1 and 20,315 J.kg-1 for eucalyptus and pine sawdust respectively. The HHV for the bagasse was 18,541 J.kg-1 and for straw was 15,628 J.kg-1. The straw presented an ash content of 12%. The expansions of the treatments ranged 4 to 9% and mechanical resistances ranging from 1,215 MPa to 0,270 MPa. All briquettes were resistant to a higher stacking to 10 m high. The methods can help to decrease the space of storage and transport.Keywords: Waste; biofuel; energy; compression; stacking.

Making Charcoal Briquettes from Corncobs Organic Waste Using Variation of Type and Percentage of Adhesives

2017 ◽  
Vol 2 (1) ◽  
pp. 43 ◽  
Author(s):  
Lilih Sulistyaningkarti ◽  
Budi Utami
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Wheat Flour ◽  
Alternative Energy ◽  
Organic Waste ◽  
Calorific Value ◽  
Ash Content ◽  
Volatile Content ◽  
Biomass Waste ◽  
Tapioca Flour

This study aimed to (1) make charcoal briquettes from corncobs organic waste; (2) determine the right type of adhesive to make a corncobs charcoal briquette to produce good quality briquettes; (3) determine the appropriate percentage of adhesive to produce corncobs briquettes to produce good quality briquettes; and (4) know the best characteristics of corncobs charcoal briquettes which include moisture content, volatile content, ash content, carbon content and caloric value. The sample used was corncob obtained from a corn farmer in Pasekan Village, Wonogiri regency. This research used experimental method in laboratory with several stages, namely: (1) preparation of materials; (2) carbonization; (3) crushing and sifting of charcoal (4) mixing charcoal with adhesive and water; (5) briquetting; (6) briquette drying; And (7) analysis of briquette quality. This adhesive types used in this research were tapioca flour and wheat flour and the percentage of adhesive material were 5%, 10% and 15% from total weight of charcoal powder. The result of the research were: (1) charcoal briquettes as alternative energy source can be made from biomass waste (corncobs organic waste); (2) charcoal briquettes from organic corncobs wastes using tapioca flour adhesives have better quality than using wheat flour adhesives; (3) the both charcoal briquettes using 5% of tapioca flour adhesive and 5% wheat flour adhesives have better quality than 10% and 15% in terms of moisture content, volatile content, ash content, carbon content and calorific value; and (4) the best characteristics obtained are for the charcoal briquettes using 5% of tapioca flour adhesive, which have water content of 3,665%; volatile matter amounting of 11.005%; ash content of 4.825%; fixed carbon content of 80.515%; and high heat value of 5661,071%.

Sign in / Sign up

Export Citation Format

Share Document