Genome-wide analysis of fitness-factors in uropathogenic Escherichia coli during growth in laboratory media and during urinary tract infections

Uropathogenic Escherichia coli (UPEC) UTI89 is a well-characterized strain, which has mainly been used to study UPEC virulence during urinary tract infection (UTI). However, little is known on UTI89 key fitness-factors during growth in lab media and during UTI. Here, we used a transposon-insertion-sequencing approach (TraDIS) to reveal the UTI89 essential-genes for in vitro growth and fitness-gene-sets for growth in Luria broth (LB) and EZ-MOPS medium without glucose, as well as for human bacteriuria and mouse cystitis. A total of 293 essential genes for growth were identified and the set of fitness-genes was shown to differ depending on the growth media. A modified, previously validated UTI murine model, with administration of glucose prior to infection was applied. Selected fitness-genes for growth in urine and mouse-bladder colonization were validated using deletion-mutants. Novel fitness-genes, such as tusA, corA and rfaG; involved in sulphur-acquisition, magnesium-uptake, and LPS-biosynthesis, were proved to be important during UTI. Moreover, rfaG was confirmed as relevant in both niches, and therefore it may represent a target for novel UTI-treatment/prevention strategies.

Interplay between IncF plasmids and topoisomerase mutations conferring quinolone resistance in the Escherichia coli ST131 clone: stability and resistance evolution

The Escherichia coli ST131 H30-Rx subclone vehicles CTX-M-15 plasmids and mutations in gyrA and parC conferring multidrug resistance successfully in the clinical setting. The aim of this study was (1) to investigate the relationship of specific topoisomerase mutations on the stability of IncF (CTX-M producing) plasmids using isogenic E. coli mutants and (2) to investigate the impact of the IncF-type plasmids present in the E. coli clone ST131 on the evolution of quinolone resistance. E. coli ATCC 25922 (background strain) and derived mutants encoding specific QRDR substitutions were used. Also, NGS-characterized IncFIA and IncFIB plasmids (encoding CTX-M genes) were included. Plasmid stability was evaluated by sequential dilutions into Luria broth medium without antibiotics for 7 days. Mutant frequency to ciprofloxacin was also evaluated. Moderate differences in the IncF plasmids stability were observed among E. coli ATCC 25922 and isogenic mutants. Under our experimental conditions, the fluctuation of bacteria harboring plasmids was less than 0.5-log(10) in all cases. In the mutant frequency tests, it was observed that the presence of these IncF plasmids increased this value significantly (10–1000-fold). Quinolone resistance substitutions in gyrA or parC genes, frequently found associated with E. coli clone ST131, do not modify the stability of ST131-associated IncFIA and IncFIB plasmids under in vitro conditions. IncF-type plasmids present in E. coli clone ST131 facilitate the selection of resistance to quinolones. These results are consistent with the clinical scenario in which the combination of resistance to quinolones and beta-lactams is highly frequent in the E. coli clone ST131.

Integration of the Salmonella Typhimurium methylome and transcriptome following environmental or metabolic perturbation reveals DNA methylation and transcriptional regulation are largely decoupled

Despite being in a golden age of prokaryotic epigenomics, little work has systematically examined the plasticity and functional impacts of the bacterial DNA methylome. Here, we leveraged SMRT sequencing to examine the m6A DNA methylome of two Salmonella enterica ser. Typhimurium strains: 14028s and a ∆metJ mutant with derepressed methionine metabolism, grown in Luria Broth or a media that simulates the intracellular environment. We find that the methylome is remarkably static-over 95% of adenosine bases retain their methylation status across conditions. Integration of methylation with transcriptomic data revealed no correlation between methylation and gene expression. Further, examining the transcriptome in ∆yhdJ bacteria, lacking the m6A methylase with the most dynamic methylation pattern in our dataset, revealed little evidence of YhdJ-mediated gene regulation. Curiously, despite G(m6A)TC motifs being particularly resistant to change across conditions, we found that the Dam methylase is required for the ∆metJ motility defect. This ∆;metJ motility defect may be partially driven by hypermethylation of the chemotaxis gene tsr. Together, these data redefine the S. Typhimurium epigenome as a highly stable system that has rare, but important, roles in transcriptional regulation. Incorporating these lessons into future studies will be critical as we progress through the epigenomic era.

Expression and secretion of active Moringa oleifera coagulant protein in Bacillus subtilis

Cationic polypeptide proteins found in the seeds of the tropical plant Moringa oleifera have coagulation efficiencies similar to aluminum and ferric sulfates without their recalcitrant nature. Although these proteins possess great potential to augment or replace traditional coagulants in water treatment, harvesting active protein from seeds is laborious and not cost-effective. Here, we describe an alternative method to express and secrete active M. oleifera coagulant protein (MO) in Bacillus subtilis. A plasmid library containing the MO gene and 173 different types of secretory signal peptides was created and cloned into B. subtilis strain RIK1285. Fourteen of 440 clones screened were capable of secreting MO with yields ranging from 55 to 122 mg/L of growth medium. The coagulant activity of the highest MO secreting clone was evaluated when grown on Luria broth, and cell-free medium from the culture was shown to reduce turbidity in a buffered kaolin suspension by approximately 90% compared with controls without the MO gene. The clone was also capable of secreting active MO when grown on a defined synthetic wastewater supplemented with 0.5% tryptone. Cell-free medium from the strain harboring the MO gene demonstrated more than a 2-fold reduction in turbidity compared with controls. Additionally, no significant amount of MO was observed without the addition of the synthetic wastewater, suggesting that it served as a source of nutrients for the effective expression and translocation of MO into the medium.

A rationally designed c-di-AMP FRET biosensor to monitor nucleotide dynamics

3’3’-cyclic di-adenosine monophosphate (c-di-AMP) is an important nucleotide second messenger found throughout the bacterial domain of life. C-di-AMP is essential in many bacteria and regulates a diverse array of effector proteins controlling pathogenesis, cell wall homeostasis, osmoregulation, and central metabolism. Despite the ubiquity and importance of c-di-AMP, methods to detect this signaling molecule are limited, particularly at single cell resolution. In this work, crystallization of the Listeria monocytogenes c-di-AMP effector protein Lmo0553 enabled structure guided design of a Förster resonance energy transfer (FRET) based biosensor, which we have named CDA5. CDA5 is a fully genetically encodable, specific, and reversible biosensor which allows for the detection of c-di-AMP dynamics both in vitro and within live cells in a nondestructive manner. Our initial studies identify a distribution of c-di-AMP in Bacillus subtilis populations first grown in Luria Broth and then resuspended in diluted Luria Broth compatible with florescence analysis. Furthermore, we find that B. subtilis mutants lacking either a c-di-AMP phosphodiesterase or cyclase have respectively higher and lower FRET responses. These findings provide novel insight into the c-di-AMP distribution within bacterial populations and establish CDA5 as a powerful platform for characterizing new aspects of c-di-AMP regulation. Importance C-di-AMP is an important nucleotide second messenger for which detection methods are severely limited. In this work we engineer and implement a c-di-AMP specific FRET biosensor to remedy this dearth. We present this biosensor, CDA5, as a versatile tool to investigate previously intractable facets of c-di-AMP biology.

Growing overnight bacterial culture in 96WP (Cabreiro Lab) v1

Luria broth (LB) is a nutrient-rich media commonly used to culture bacteria in the lab. LB agar plates are frequently used to isolate individual (clonal) colonies of bacteria carrying a specific plasmid. However, a liquid culture is capable of supporting a higher density of bacteria and is used to grow up sufficient numbers of bacteria necessary to isolate enough plasmid DNA for experimental use. The following protocol is for inoculating an overnight culture of liquid LB with bacteria. This is a general protocol for making a liquid bacterial culture in 96-well plate format from frozen stock plates. The following parameters need to be mentioned for the specific type of bacterial strains inoculated: Parameters Example 1. Name/s of the bacterial strain OP50 2. Growth temperature 37C 3. Incubation time 16-18hrs 4. Antibiotic resistance (if any) None 5. Rpm of the shaking incubator (if needed) 200-220 rpm if required

A rationally designed c-di-AMP FRET biosensor to monitor nucleotide dynamics

ABSTRACT3’3’-cyclic di-adenosine monophosphate (c-di-AMP) is an important nucleotide second messenger found throughout the bacterial domain of life. C-di-AMP is essential in many bacteria and regulates a diverse array of effector proteins controlling pathogenesis, cell wall homeostasis, osmoregulation, and central metabolism. Despite the ubiquity and importance of c-di-AMP, methods to detect this signaling molecule are limited, particularly at single cell resolution. In this work, crystallization of the Listeria monocytogenes c-di-AMP effector protein Lmo0553 enabled structure guided design of a Förster resonance energy transfer (FRET) based biosensor, which we have named CDA5. CDA5 is a fully genetically encodable, specific, and reversible biosensor which allows for the detection of c-di-AMP dynamics both in vitro and within live single cells in a nondestructive manner. Our initial studies identify a unimodal distribution of c-di-AMP in Bacillus subtilis which decreases rapidly when cells are grown in diluted Luria Broth. Furthermore, we find that B. subtilis mutants lacking either a c-di-AMP phosphodiesterase or cyclase have respectively higher and lower FRET responses, again in a unimodal manner. These findings provide novel insight into c-di-AMP distribution within bacterial populations and establish CDA5 as a powerful platform for characterizing new aspects of c-di-AMP regulation.ImportanceC-di-AMP is an important nucleotide second messenger for which detection methods are severely limited. In this work we engineer and implement a c-di-AMP specific FRET biosensor to remedy this dearth. We present this biosensor, CDA5, as a versatile tool to investigate previously intractable facets of c-di-AMP biology.

Preliminary Detection of Antibacterial Activity of Fishpond Water Bacteria against Aquaculture Pathogenic Bacteria

Aquaculture is currently experiencing massive loss due to the outbreak of pathogenic bacteria. One of the outbreak causes is the development of pathogenic bacterial resistance to the antibacterial. The problem can be solved using microorganisms that can produce new antibacterial compounds. The purpose of this research was to obtain bacteria from fishpond water that could produce antibacterial compounds. About two out of 81 isolates could produce antibacterial compounds. Those two isolates were obtained from saltwater fishponds in North Jakarta (TS2) and Harapan Island (PHY). All fishpond water was grown in marine broth or Luria broth. Extraction of antibacterial compounds was performed using four types of solvents: chloroform, dichloromethane, ethyl acetate, and methanol. Each of the solvents showed a different result. The extraction can only be successfully performed using chloroform and dichloromethane. Extraction using dichloromethane showed a larger inhibitory clear zone than chloroform. Based on 16S rRNA gene sequencing, PHY isolate was identified as Bacillus sp. and TS2 as Acinetobacter sp. In conclusion, isolate TS2 and PHY, which produced antibacterial compounds, showed potential use as aquaculture probiotics.

EVALUTION OF ANTIMICROBIAL ACTIVITY OF PARTIAL PURIFIED BACTERIOCIN FROM LOCAL ISOLATE OF BACILLUS LICHENIFORIMS HJ2020 MT192715.1

This study was aimed to produce bacteriocin from Bacillus. licheniformis isolated from local soil of corn and sunflower fields and using as antimicrobial agent . Fourteen of local isolates of Bacillus sp. were obtained and ability of these isolates for growth on Brain heart infusion agar (BHI) at 550C were tested. Isolate C4 was revealed high growth density in comparison with other isolates. Isolate C4 was identified as Bacillus licheniformis according to morphological, cultural and biochemical tests, Moreover genetic analysis for 16S rRNA gene and given accession number MT192715.1 in GenBank of NCBI . Production of bacteriocin from this isolate was carried out in Luria Broth (LB) and partially purified by precipitation with 30-70 % saturation of ammonium sulfate followed by concentrated using poly ethylene glycol (PEG).The antimicrobial activity of partially purified bacteriocin was assayed against many species of food spoilage microorganism. Results were revealed that anitimicrobial activity of bacteriocin were between (0 - 360 ) units / ml. Stability of antimicrobial activity of partially purified bacteriocin toward Staphylococcus aureus were tested after incubation at different values of pH, temperature and some of enzyme which included proteolytic enzymes, α-amylase and lipase .The results indicated that residual inhibition activity of bacteriocin were varied according to conditions of incubation and type of treatment .

Silver Antibacterial Synergism Activities with Eight Other Metal(loid)-Based Antimicrobials against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus

The present study surveys potential antibacterial synergism effects of silver nitrate with eight other metal or metalloid-based antimicrobials (MBAs), including silver nitrate, copper (II) sulfate, gallium (III) nitrate, nickel sulfate, hydrogen tetrachloroaurate (III) trihydrate (gold), aluminum sulfate, sodium selenite, potassium tellurite, and zinc sulfate. Bacteriostatic and bactericidal susceptibility testing explored antibacterial synergism potency of 5760 combinations of MBAs against three bacteria (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus) in three different media. Silver nitrate in combination with potassium tellurite, zinc sulfate, and tetrachloroaurate trihydrate had remarkable bactericidal and bacteriostatic synergism effects. Synergism properties of MBAs decreased effective antibacterial concentrations remarkably and bacterial cell count decreased by 8.72 log10 colony-forming units (CFU)/mL in E. coli, 9.8 log10 CFU/mL in S. aureus, and 12.3 log10 CFU/mL in P. aeruginosa, compared to each MBA alone. Furthermore, most of the MBA combinations inhibited the recovery of bacteria; for instance, the combination of silver nitrate–tetrachloroaurate against P. aeruginosa inhibited the recovery of bacteria, while three-fold higher concentration of silver nitrate and two-fold higher concentration of tetrachloroaurate were required for inhibition of recovery when used individually. Overall, higher synergism was typically obtained in simulated wound fluid (SWF) rather than laboratory media. Unexpectedly, the combination of A silver nitrate–potassium tellurite had antagonistic bacteriostatic effects in Luria broth (LB) media for all three strains, while the combination of silver nitrate–potassium tellurite had the highest bacteriostatic and bactericidal synergism in SWF. Here, we identify the most effective antibacterial MBAs formulated against each of the Gram-positive and Gram-negative pathogen indicator strains.