Physical basis and possible applications of nondestructive methods in determining the mechanical properties of polymer materials

1971 ◽  
Vol 3 (2) ◽  
pp. 229-234
Author(s):  
V. A. Latishenko
Keyword(s):  
Mechanical Properties ◽  
Physical Basis ◽  
Polymer Materials ◽  
Nondestructive Methods

Possibilities of using biodegradable polymeric materials in the agricultural sector

2020 ◽  
Vol 67 (2) ◽  
pp. 115-120
Author(s):  
Raisa A. Alekhina ◽  
Victoriya E. Slavkina ◽  
Yuliya A. Lopatina
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Agricultural Sector ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Limiting Factors ◽  
Research Purpose ◽  
Biodegradable Materials ◽  
Advantages And Disadvantages

The article presents options for recycling polymers. The use of biodegradable materials is promising. This is a special class of polymers that can decompose under aerobic or anaerobic conditions under the action of microorganisms or enzymes forming natural products such as carbon dioxide, nitrogen, water, biomass, and inorganic salts. (Research purpose) The research purpose is in reviewing biodegradable materials that can be used for the manufacture of products used in agriculture. (Materials and methods) The study are based on open information sources containing information about biodegradable materials. Research methods are collecting, studying and comparative analysis of information. (Results and discussion) The article presents the advantages and disadvantages of biodegradable materials, mechanical properties of the main groups of biodegradable polymers. The article provides a summary list of agricultural products that can be made from biodegradable polymer materials. It was found that products from the general group are widely used in agriculture. Authors have found that products from a special group can only be made from biodegradable polymers with a controlled decomposition period in the soil, their use contributes to increasing the productivity of crops. (Conclusions) It was found that biodegradable polymer materials, along with environmental safety, have mechanical properties that allow them producing products that do not carry significant loads during operation. We have shown that the creation of responsible products (machine parts) from biodegradable polymers requires an increase in their strength properties, which is achievable by creating composites based on them. It was found that the technological complexity of their manufacture and high cost are the limiting factors for the widespread use of biodegradable polymers at this stage.

Micro-Hardness and Morphology of LDPE Influenced by Beta Radiation

2014 ◽  
Vol 606 ◽  
pp. 253-256 ◽  
Author(s):  
Martin Ovsik ◽  
Petr Kratky ◽  
David Manas ◽  
Miroslav Manas ◽  
Michal Stanek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Hardness Test ◽  
Polymer Materials ◽  
Beta Radiation ◽  
Micro Hardness ◽  
X Ray Diffraction ◽  
Depth Sensing ◽  
Surface Layers ◽  
Hardness Values ◽  
Different Doses

This article deals with the influence of different doses of Beta radiation to the structure and mico-mechanical properties of Low-density polyethylene (LDPE). Hard surface layers of polymer materials, especially LDPE, can be formed by radiation cross-linking by β radiation with doses of 33, 66 and 99 kGy. Material properties created by β radiation are measured by micro-hardness test using the DSI method (Depth Sensing Indentation). Individual radiation doses caused structural and micro-mechanical changes which have a significant effect on the final properties of the LDPE tested. The highest values of micro-mechanical properties were reached at radiation dose of 66 and 99 kGy, when the micro-hardness values increased by about 21%. The changes were examined and confirmed by X-ray diffraction.

scholarly journals Laboratory Study of Deformation Behaviour of Two New Reinforcing Polymeric TSLs and Their Potential Application in Deep Underground Coal Mine

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2205
Author(s):  
Han Liang ◽  
Jun Han ◽  
Chen Cao ◽  
Shuangwen Ma
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Underground Mining ◽  
Deformation Behaviour ◽  
Polymer Materials ◽  
Surface Protection ◽  
Steel Mesh ◽  
Geological Conditions ◽  
Deep Underground ◽  
Roadway Support

Thin spray-on liner (TSL) is a surface protection technology used by spraying a polymer film, which is widely used for mine airtightness and waterproofing. A reinforcing TSL can replace steel mesh, which is a new method for roadway support. This paper reviews the development of a reinforcing TSL. Considering the deterioration of geological conditions in deep underground mining and the demand for reinforcing automation, two kinds of polymeric reinforcing TSL (RPTSL) materials are developed. The mechanical characteristics of the new TSL materials are studied experimentally. Results show that the average compressive strength, tensile strength, cohesion, and internal friction angle of the two TSL materials are 52 and 32 MPa, 12 and 8 MPa, 6.2 and 17.2 MPa, and 33.6° and 25.9°, respectively. The bonding strength between the two materials and coal is greater than the tensile strength of coal itself, and the mechanical properties of the material for comparison are lower than those of both materials. Based on the TSL support mechanism, we examine the application of the two TSL materials to the mining environment and compare the mechanical properties of polymer materials and cement-based materials. The advantages of polymer materials include versatile mechanical properties, good adhesion, and high early strength. This study provides a new support material to replace steel mesh for roadway surface support, which satisfies the needs of different surface support designs under complex geological conditions, and promotes the automation of roadway support.

scholarly journals Starch–Mucilage Composite Films: An Inclusive on Physicochemical and Biological Perspective

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2588
Author(s):  
Mansuri M. Tosif ◽  
Agnieszka Najda ◽  
Aarti Bains ◽  
Grażyna Zawiślak ◽  
Grzegorz Maj ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Barrier Properties ◽  
Edible Films ◽  
Packaging Material ◽  
Polymer Materials ◽  
Synthesis Process ◽  
Packaging Materials ◽  
Packaging Film ◽  
Biodegradable Packaging ◽  
Effective Manner

In recent years, scientists have focused on research to replace petroleum-based components plastics, in an eco-friendly and cost-effective manner, with plant-derived biopolymers offering suitable mechanical properties. Moreover, due to high environmental pollution, global warming, and the foreseen shortage of oil supplies, the quest for the formulation of biobased, non-toxic, biocompatible, and biodegradable polymer films is still emerging. Several biopolymers from varied natural resources such as starch, cellulose, gums, agar, milk, cereal, and legume proteins have been used as eco-friendly packaging materials for the substitute of non-biodegradable petroleum-based plastic-based packaging materials. Among all biopolymers, starch is an edible carbohydrate complex, composed of a linear polymer, amylose, and amylopectin. They have usually been considered as a favorite choice of material for food packaging applications due to their excellent forming ability, low cost, and environmental compatibility. Although the film prepared from bio-polymer materials improves the shelf life of commodities by protecting them against interior and exterior factors, suitable barrier properties are impossible to attain with single polymeric packaging material. Therefore, the properties of edible films can be modified based on the hydrophobic–hydrophilic qualities of biomolecules. Certain chemical modifications of starch have been performed; however, the chemical residues may impart toxicity in the food commodity. Therefore, in such cases, several plant-derived polymeric combinations could be used as an effective binary blend of the polymer to improve the mechanical and barrier properties of packaging film. Recently, scientists have shown their great interest in underutilized plant-derived mucilage to synthesize biodegradable packaging material with desirable properties. Mucilage has a great potential to produce a stable polymeric network that confines starch granules that delay the release of amylose, improving the mechanical property of films. Therefore, the proposed review article is emphasized on the utilization of a blend of source and plant-derived mucilage for the synthesis of biodegradable packaging film. Herein, the synthesis process, characterization, mechanical properties, functional properties, and application of starch and mucilage-based film are discussed in detail.

scholarly journals The effect of foaming agent on mechanical and physical properties of Polypropylene

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
SEDEF CAKIR 1 ◽  
MUHAMMED AYCICEK 1 ◽  
EDIZ ALTUN 2 ◽  
Akin Akinci 1
Keyword(s):  
Mechanical Properties ◽  
Cell Density ◽  
Cell Morphology ◽  
Injection Pressure ◽  
Skin Layer ◽  
Polymer Materials ◽  
Cell Diameter ◽  
Melt Temperature ◽  
Foaming Agent ◽  
Foaming Agents

In this study, Polypropylene (PP) foam materials were used with injection parameters such as melting, molding and injection temperatures. To produce foam materials, chemical foaming agents were used, and added to polymer materials as 1wt.%, 1.5wt.%, 2wt.%, 2.5wt.%, 3wt.%. The mechanical properties of foam samples were determined based on the parameters. Cell morphology characterization such as cell diameter, cell count, skin layer thickness and cell density, and mechanical properties such as tensile and impact strength of polymer foams were examined.Generally, the closed-cell foam structure was obtained. The most important parameters affecting the cell morphology have been injection pressure, melt temperature and amount of foaming agent. With increasing the amount of foaming agent, cell density increased, foam density and mechanical properties decreased.

Short Carbon Fibers Composites With High Filler Contents Rheology and Mechanical Properties

1999 ◽  
Author(s):  
Y. Schmitt ◽  
C. Paulick ◽  
Y. Bour ◽  
F. X. Royer
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Tensile Test ◽  
Carbon Fibers ◽  
Polymer Materials ◽  
Complex Geometries ◽  
Small Ratio ◽  
The Matrix ◽  
Short Carbon

Abstract The control of the quality of mixture based on very short carbon fibers and epoxyde resins leads to suitable mixture for molding of complex geometries. A gain in fluidity is obtained if the suspensions are treated by ultrasounds and simultaneously stirred under vacuum. Addition in a very small ratio of microbubbles in the mixture allows to obtain a viscosity less than those of the matrix alone. For many polymer materials the gain of fluidity can be of 20 to 25% with size and concentration of the microspheres thoroughly chosen. A certain number of new resins is developped to elaborate composite materials with specific mechanical properties close to standard aluminium. Tensile test an ultimate stress are used to quantify the improvements of the mechanical properties. Fillers concentrations up to 30 % are obtained.

Influence Study of Plasticizer Compatibility on Strength Properties of Ethylene-Vinyl Acetate

2018 ◽  
Vol 935 ◽  
pp. 79-83
Author(s):  
A.N. Volotskoy ◽  
Yuriy V. Yurkin ◽  
V.V. Avdonin
Keyword(s):  
Mechanical Properties ◽  
Vinyl Acetate ◽  
Ethylene Vinyl Acetate ◽  
Dynamic Mechanical Properties ◽  
Strength Properties ◽  
Polymer Materials ◽  
Strength Characteristics ◽  
Actual Problem ◽  
Urgent Task ◽  
Wide Range

This research is devoted to the actual problem of the development of damping polymer materials which are effective in a wide range of temperatures and having satisfactory strength characteristics. There are many works devoted to the study of dynamic mechanical properties of filled composites, but most do not take into account the influence of plasticizer on the strength properties of the polymer, as they change its characteristics for the worse. In this respect, the study and comparison of the mechanical properties of the polymer base with the introduction of different types and concentrations of plasticizers is an urgent task. According to the received regularities it was possible to define the type, concentration and boundaries of the polarity of the plasticizer, which reduces the strength characteristics of ethylene-vinyl acetate to a lesser degree.

Improvement of PA6 Mechanical Properties by Radiation Cross-Linking

2015 ◽  
Vol 1120-1121 ◽  
pp. 1163-1166 ◽  
Author(s):  
Petr Kratky ◽  
David Manas ◽  
Miroslav Manas ◽  
Michal Stanek ◽  
Martin Ovsik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Layer ◽  
Polymer Material ◽  
Polyamide 6 ◽  
Polymer Materials ◽  
Cross Linking ◽  
Depth Sensing ◽  
Surface Layers ◽  
Hard Surface ◽  
End Use

Influence of mechanical properties of the hard surface layer of modified polyamide 6 is studied. Mechanical properties are acquired by nanohardness test with using the DSI method (Depth Sensing Indentation). Hard surface layers are created by radiation cross-linking technology. This technology allows polymer materials modification followed by the change of their end-use properties. The surface layer of polymer material is modified by ionizing β - radiation. When the polymer material is exposed to the β radiation, it is possible to observe changes of the surface layer at applied load. Radiation cross-linking usually improves strength, reduces creep, contributes to chemical resistance improvement, and in many cases improves tribological properties.

Sign in / Sign up

Export Citation Format

Share Document