Sustainable Valorization of Algae Biomass via Thermochemical Processing Route: An Overview

2021 ◽  
pp. 126399
Author(s):  
Hafiz Muhammad Uzair Ayub ◽  
Ashfaq Ahmed ◽  
Su Shiung Lam ◽  
Jechan Lee ◽  
Pau Loke Show ◽  
...  
Keyword(s):  
Processing Route ◽  
Algae Biomass ◽  
Thermochemical Processing

The crystallization of thin-film ceramics

1992 ◽  
Vol 50 (1) ◽  
pp. 338-339
Author(s):  
J.M. Schwartz ◽  
L.F. Francis ◽  
L.D. Schmidt ◽  
P.S. Schabes-Retchkiman
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Sol Gel ◽  
Processing Route ◽  
Small Areas ◽  
Ceramic Thin Films ◽  
Complex Shapes ◽  
Sol Gel Process ◽  
Ceramic Precursors ◽  
Crystalline Ceramic

Ceramic thin films and coatings are of interest for electrical, optical, magnetic and thermal barrier applications. Critical for improved properties in thin films is the development of specific microstructures during processing. To this end, the sol-gel method is advantageous as a versatile processing route. The sol-gel process involves depositing a solution containing metalorganic or colloidal ceramic precursors onto a substrate and heating the deposited layer to form a crystalline or non-crystalline ceramic coating. This route has several advantages, including the ability to create tailored microstructures and properties, to coat large or small areas, simple or complex shapes, and to more easily prepare multicomponent ceramics. Sol-gel derived coatings are amorphous in the as-deposited state and develop their crystalline structure and microstructure during heat-treatment. We are particularly interested in studying the amorphous to crystalline transformation, because many key features of the microstructure such as grain size and grain size distribution may be linked to this transformation.

Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties

2018 ◽  
Vol 115 (4) ◽  
pp. 407 ◽  
Author(s):  
Annika Eggbauer Vieweg ◽  
Gerald Ressel ◽  
Peter Raninger ◽  
Petri Prevedel ◽  
Stefan Marsoner ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Energy ◽  
Charpy Impact ◽  
Heat Treating ◽  
Processing Route ◽  
High Heating Rate ◽  
Heating Rates ◽  
High Heating ◽  
Tempering Treatment ◽  
Carbide Distribution

Induction heating processes are of rising interest within the heat treating industry. Using inductive tempering, a lot of production time can be saved compared to a conventional tempering treatment. However, it is not completely understood how fast inductive processes influence the quenched and tempered microstructure and the corresponding mechanical properties. The aim of this work is to highlight differences between inductive and conventional tempering processes and to suggest a possible processing route which results in optimized microstructures, as well as desirable mechanical properties. Therefore, the present work evaluates the influencing factors of high heating rates to tempering temperatures on the microstructure as well as hardness and Charpy impact energy. To this end, after quenching a 50CrMo4 steel three different induction tempering processes are carried out and the resulting properties are subsequently compared to a conventional tempering process. The results indicate that notch impact energy raises with increasing heating rates to tempering when realizing the same hardness of the samples. The positive effect of high heating rate on toughness is traced back to smaller carbide sizes, as well as smaller carbide spacing and more uniform carbide distribution over the sample.

MANUFACTURING GASEOUS PRODUCTS BY PYROLYSIS MICROALGAE BIOMASS

2019 ◽  
pp. 23-34
Author(s):  
N. I. Chernova ◽  
S. V. Kiseleva ◽  
O. M. Larina ◽  
G. A. Sytchev
Keyword(s):  
Raw Materials ◽  
Renewable Energy Sources ◽  
High Energy ◽  
Initial Mass ◽  
Solid Residue ◽  
Algae Biomass ◽  
Gaseous Products ◽  
Microalgae Biomass ◽  
Pyrolysis Liquid ◽  
Pyrolysis Gases

Algae biomass is considered as an alternative raw material for the production of biofuels. The search for new types of raw materials, including high-energy types of microalgae, remains relevant, since the share of motor fuels in the structure of the global fuel and energy balance remains consistently high (about 35%), and the price of oil is characterized by high volatility. The authors have considered the advantages of microalgae as sources of raw materials for fuel production. Biochemical and thermochemical conversion are proposed as technologies for their processing. This paper presents the results of the study of the pyrolysis of the biomass of clonal culture of blue-green microalgae / cyanobacteriumArthrospira platensis rsemsu 1/02-Pfrom the collection of the Research Laboratory of Renewable Energy Sources of the Lomonosov Moscow State University. An experiment to study the process of pyrolysis of microalgae biomass was carried out at the experimental facility of the Institute of High Temperatures RAS in pure nitrogen grade 6.0 to create an oxygen-free environment with a linear heating rate of 10 ºС / min from room temperature to 1000 ºС. The whole process of pyrolysis proceeded in the field of endothermy. The specific amounts of solid residue, pyrolysis liquid and gaseous products were experimentally determined. As a result of the pyrolysis of microalgae biomass weighing 15 g, the following products were obtained: 1) coal has the mass of the solid residue is 2.68 g, or 17.7% of the initial mass of the microalgae (while 9.3% of the initial mass of the microalgae remained in the reactor); 2) pyrolysis liquid – weight 3.3 g, or 21.9% of the initial weight; 3) non-condensable pyrolysis gases – weight 1.15 l. The specific volumetric gas yield (the amount of gas released from 1 kg of the starting material) was 0.076 Nm3/ kg. The analysis of the composition and specific volume yield of non-condensable pyrolysis gases formed in the process of pyrolysis, depending on temperature. It is shown that with increasing temperature, the proportion of highcalorie components of the gas mixture (hydrogen, methane and carbon monoxide) increases. The calorific value of the mixture of these gases has been estimated.

Thermochemical Processing of the Waste Containing Organic Substances by Means of Filtration Combustion;

2004 ◽  
Vol 35 (5-6) ◽  
pp. 387-392
Author(s):  
V. A. Borodulya ◽  
L. M. Vinogradov ◽  
S. A. Zhdanok ◽  
A. V. Krauklis
Keyword(s):  
Filtration Combustion ◽  
Organic Substances ◽  
Thermochemical Processing

Non-Toxic Environment for Ferritic Nitrocarburising Process

2018 ◽  
Vol 69 (9) ◽  
pp. 2416-2419
Author(s):  
Mihai Branzei ◽  
Mihai Ovidiu Cojocaru ◽  
Leontin Nicolae Druga ◽  
Florica Tudose ◽  
Roxana Trusca
Keyword(s):  
Surface Reaction ◽  
Effective Solution ◽  
Reaction Products ◽  
Toxic Reaction ◽  
Wide Range ◽  
Toxic Environment ◽  
Thermochemical Processing ◽  
Surface Saturation ◽  
Gas Molecules ◽  
Toxic Components

Experimental research aimed to find a solution for replacing components with high toxicity (or generating such components as a result of reactions occurring in the environment at processing temperatures) from the environments used for ferritic nitrocarburising process (FNCP) with non-hazardous components, but extremely active during the process. In the temperature range in which this type of processing is applied (lower than the eutectoid transformation temperature in the Fe-N phase diagram), the most commonly used media are liquid or gaseous; liquid ones contain toxic components (sodium or potassium cyanates/cyanides), and gaseous ones require complex equipments. Packing is extremely rarely used, but in this case pack-mix contain toxic components (15 � 20 wt.% sodium or potassium ferrocyanide). Urea also called carbamide (CO (NH2)2) is the active component in the pack-mixing proposed to be used for FNCP. Carbamide is used in low temperature cyanidation thermochemical heat treatment (liquid FNC), together with sodium or potassium carbonates, resulting in very toxic reaction products (sodium or potassium cyanates). Compared to cyanidation, in the version proposed in the paper, the carbamide does not react with carbonates because they are not found in the composition of the environment but decomposes in the presence or absence of oxygen (by a disproportionation reaction) with the formation of some gas molecules interesting for the process. It has been concluded that the use of carbamide together with two other components, activated charcoal (having a triple role - dispersing, storage, surface saturation) and respectively ammonium chloride as surface reaction activator, is an effective solution for achieving the desired goals by applying this type of thermochemical processing to a wide range of products made of quality steels up to alloy miscellaneous steels.

Wastewater Treatment Using Marine Algae Biomass as Pollutants Removal

2018 ◽  
Vol 69 (5) ◽  
pp. 1089-1098
Author(s):  
Elena Suzana Biris Dorhoi ◽  
Maria Tofana ◽  
Simona Maria Chis ◽  
Carmen Elena Lupu ◽  
Ticuta Negreanu Pirjol
Keyword(s):  
Wastewater Treatment ◽  
Green Algae ◽  
Marine Algae ◽  
Tap Water ◽  
Ulva Lactuca ◽  
Raw Material ◽  
Bioactive Substances ◽  
Algae Biomass ◽  
Marine Biomass ◽  
Pollutants Removal

The valorification of the marine biomass is an important resource for many industries like pharmaceutical, supplying raw material for the extraction of bioactive substances (vitamins, sterols and collagen), cosmetics, biofertilizers and wastewater treatment. In the last years a special attention has been given to the use of macroalgae. The aim of this study was to emphasize the capacity of two representative green algae species frequent presents on the Romanian shore, Ulva lactuca (L.) and Cladophora vagabunda (L.) Hoek, to remove two usual detergents from wastewater. The green algae washed, dried at room temperature, macerated to powder were introduced into different filter paper for comparison, then immersed in waste water treated with different concentrations of detergents. Tap water was used for the experiment. The results show that Ulva lactuca (L.) species is suitable than Cladophora vagabunda (L.) Hoek species, for wastewater treatment.

Artificial mixing to reduce growth of the blue-green alga Microcystis in Lake Nieuwe Meer, Amsterdam: an evaluation of 7 years of experience

2001 ◽  
Vol 1 (1) ◽  
pp. 17-23 ◽  
Author(s):  
E. Jungo ◽  
Petra M. Visser ◽  
Jasper Stroom ◽  
Luuc R. Mur
Keyword(s):  
Water Body ◽  
Bubble Plume ◽  
Annual Fluctuation ◽  
Algae Biomass ◽  
Mechanical Parts ◽  
Living Space ◽  
Artificial Mixing ◽  
Flexible Pipes ◽  
Nitrogen Concentrations ◽  
Extensive Growth

The problem of Lake Nieuwe Meer (area = 1.3 km2, max. depth 30 m, Ptot = 500 mg/m3) was extensive growth of Microcystis with disturbing scum forming. Since 1993 the lake has been artificially mixed in summer by a bubble plume installation. The result is quite successful since the mass of Microcystis is up to 20 times lower than in the years before mixing and no scum is present any more. The study in Lake Nieuwe Meer showed a shift from cyanobacterial dominance (mainly Microcystis) to flagellates, green-algae and diatoms when artificial mixing was applied. Total phosphorus and nitrogen concentrations did not change as a result of mixing and had apparently no effect on the shift in the phytoplankton composition. The chlorophyll-a concentration was much lower in the mixed lake as a result of dilution. The total algae biomass decreased. The transparency did not improve. The total heat energy of the lake is slightly higher than before mixing but still remains in the range of annual fluctuation. The temperature on the surface is approximately 2°C lower. In the whole water-body oxygen was always higher than 5 mg/l. Living space for fish is therefore wider. The installation in Lake Nieuwe Meer consists of flexible pipes near the sediment, built in a way to prevent sediment erosion and transport into the water. There are no constructions in the water-body. All mechanical parts are on land. The layout of the installation is shown in Fig. 1. Installed compressor energy is 85 kW. This is equivalent to an upper middle-class motor-car. The design was made specifically for this problem. It is based on the physical data of the algae and the plant. It would be beneficial to use this 7 year's experience for further applications e.g. elimination of toxic algae in drinking-water reservoirs.

Chlorella vulgaris as a Source of Essential Fatty Acids and Micronutrients: A Brief Commentary

2017 ◽  
Vol 10 (1) ◽  
pp. 92-99 ◽  
Author(s):  
Hércules Rezende Freitas
Keyword(s):  
Fatty Acids ◽  
Fatty Acid ◽  
Culture Medium ◽  
Essential Fatty Acids ◽  
Total Lipid Content ◽  
Dietary Quality ◽  
Negative Effects ◽  
Algae Biomass ◽  
Dietary Consumption ◽  
Acid Consumption

Polyunsaturated fatty acids (PUFAs) comprise about 35-40% of the total lipid content from green algaeChlorella, reaching up to 24% linoleic acid and 27% α-linolenic acid inC. vulgaris. Also, microalgae nutrient composition may be modulated by changes in the culture medium, increasing fatty acid and microelement concentrations in the algae biomass. PUFAs, such as α-linolenic (n-3) and linoleic (n-6) acids, as well as its derivatives, are considered essential for dietary consumption, and their ability to regulate body chemistry has been recently explored in depth. A balanced fatty acid consumption is shown to counteract the negative effects of western diets, such as chronic inflammation and glucose intolerance. In this brief commentary, technological and practical uses ofC. vulgarisare explored as means to improve dietary quality and, ultimately, human health.

scholarly journals Influence of HAP on the Morpho-Structural Properties and Corrosion Resistance of ZrO2-Based Composites for Biomedical Applications

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 202
Author(s):  
Réka Barabás ◽  
Carmen Ioana Fort ◽  
Graziella Liana Turdean ◽  
Liliana Bizo
Keyword(s):  
Electrochemical Impedance ◽  
Artificial Saliva ◽  
Synergetic Effect ◽  
Composite Layer ◽  
Charge Transfer Resistance ◽  
Processing Route ◽  
Dental Alloys ◽  
Metallic Electrode ◽  
Transfer Resistance ◽  
X Ray

In the present work, ZrO2-based composites were prepared by adding different amounts of antibacterial magnesium oxide and bioactive and biocompatible hydroxyapatite (HAP) to the inert zirconia. The composites were synthesized by the conventional ceramic processing route and morpho-structurally analyzed by X-ray powder diffraction (XRPD) and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Two metallic dental alloys (i.e., Ni–Cr and Co–Cr) coated with a chitosan (Chit) membrane containing the prepared composites were exposed to aerated artificial saliva solutions of different pHs (i.e., 4.3, 5, 6) and the corrosion resistances were investigated by electrochemical impedance spectroscopy technique. The obtained results using the two investigated metallic dental alloys shown quasi-similar anticorrosive properties, having quasi-similar charge transfer resistance, when coated with different ZrO2-based composites. This behavior could be explained by the synergetic effect between the diffusion process through the Chit-composite layer and the roughness of the metallic electrode surface.

Sign in / Sign up

Export Citation Format

Share Document