scholarly journals In Situ Delineation Etch Reveals Subtle Detail in SEM Images of Ion Milled Cross Sections Enabling In-Fab 3-D Metrology and Characterization

2000 ◽  
Vol 8 (2) ◽  
pp. 36-39
Author(s):  
Clive Chandler
Keyword(s):  
Sample Preparation ◽  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Automated System ◽  
Sem Images ◽  
Difficult Time ◽  
Device Structures ◽  
Wet Etch ◽  
Conventional Sample

Control of layer thickness is critically important in the manufacture of semiconductor devices. Cross-sectioning exposes device structures for direct examination but conventional sample preparation procedures are difficult, time consuming, and grossly destructive. Cross sections created by focused ion beam (FIB) milling are easier, faster, and less destructive but have not offered the clear layer delineation provided by etching in the conventional sample preparation process. A new gas etch capability (Delineation Etch™ from FEI Company) offers results that are equivalent to conventional wet-etch preparations in a fraction of the time from a single, automated system in the fab without destroying the wafer. The new etch process also has application in milling high-aspect-ratio holes to create contacts to buried metal layers, and in deprocessing devices to reveal silicon and polysilicon structures.

Alternative FIB TEM Sample Preparation Method for Cross-Sections of Thin Metal Films Deposited on Polymer Substrates

2013 ◽  
Vol 19 (4) ◽  
pp. 1080-1091 ◽  
Author(s):  
Felipe Rivera ◽  
Robert Davis ◽  
Richard Vanfleet
Keyword(s):  
Sample Preparation ◽  
Cross Sections ◽  
Elemental Analysis ◽  
Focused Ion Beam ◽  
Preparation Method ◽  
Ion Beam ◽  
Sample Preparation Method ◽  
Site Specific ◽  
Polymer Substrates ◽  
Interface Layers

AbstractTransmission electron microscopy (TEM) and focused ion beam (FIB) are proven tools to produce site-specific samples in which to study devices from initial processing to causes for failure, as well as investigating the quality, defects, interface layers, etc. However, the use of polymer substrates presents new challenges, in the preparation of suitable site-specific TEM samples, which include sample warping, heating, charging, and melting. In addition to current options that address some of these problems such as cryo FIB, we add an alternative method and FIB sample geometry that address these challenges and produce viable samples suitable for TEM elemental analysis. The key feature to this approach is a larger than usual lift-out block into which small viewing windows are thinned. Significant largely unthinned regions of the block are left between and at the base of the thinned windows. These large unthinned regions supply structural support and thermal reservoirs during the thinning process. As proof-of-concept of this sample preparation method, we also present TEM elemental analysis of various thin metallic films deposited on patterned polycarbonate, lacquer, and poly-di-methyl-siloxane substrates where the pattern (from low- to high-aspect ratio) is preserved.

Failure Analysis of Flip Chip C4 Package Using Focused Ion Beam Milling Technique

2011 ◽  
Author(s):  
Lihong Cao ◽  
Loc Tran ◽  
Wallace Donna
Keyword(s):  
Sample Preparation ◽  
Failure Analysis ◽  
Cross Sections ◽  
Flip Chip ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Failure Mechanisms ◽  
Organic Substrate ◽  
Dual Beam ◽  
Preparation Techniques

Abstract This article describes how Focused Ion Beam (FIB) milling methodology enhances the capability of package-level failure analysis on flip-chip packages by eliminating the artifacts induced by using conventional mechanical techniques. Dual- Beam Focused Ion Beam (DB FIB) cross sections were successful in detecting failure mechanisms related either to the die/C4 bump or package defect inside the organic substrate. This paper outlines detailed sample preparation techniques prior to performing the DB FIB cross-sections, along with case studies of DB FIB cross-sections.

scholarly journals Image segmentation and analysis for densification mapping of nanoporous gold after nanoindentation

MRS Advances ◽  
2021 ◽  
Author(s):  
Claudia Richert ◽  
Yijuan Wu ◽  
Murilo Hablitzel ◽  
Erica T. Lilleodden ◽  
Norbert Huber
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Nanoporous Gold ◽  
Sem Images ◽  
Cross Sectional ◽  
Local Thresholding ◽  
Sectional Plane ◽  
Global Thresholding ◽  
Global And Local

AbstractSegmentation of scanning electron microscopy (SEM) images of focused ion beam (FIB) cross-sections through indented regions in nanoporous gold (np-Au) is carried out. A key challenge for image analysis of open porous materials is the appropriate binarization of the pore and gold ligament regions while excluding material lying below the cross-sectional plane. Here, a manual approach to thresholding is compared to global and local approaches. The global thresholding resulted in excessive deviations from the nominal solid fraction, due to a strong gray-scale gradient caused by the tilt angle during imaging and material shadowing. In contrast, the local thresholding approach delivered local solid fractions that were free of global gradients, and delivered a quality comparable to the manual segmentation. The extracted densification profiles vertically below the indenter as well as parallel to the surface showed an exponential-type decay from the indenter tip towards the nominal value of 1 far from the indenter. Graphic abstract

FIB Plan and Side View Cross-Sectional TEM Sample Preparation of Nanostructures

2013 ◽  
Vol 20 (1) ◽  
pp. 133-140 ◽  
Author(s):  
Filip Lenrick ◽  
Martin Ek ◽  
Daniel Jacobsson ◽  
Magnus T. Borgström ◽  
L. Reine Wallenberg
Keyword(s):  
Sample Preparation ◽  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Substrate Surface ◽  
Side View ◽  
Transmission Electron Microscopy Analysis ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Electron Microscopy Analysis

AbstractFocused ion beam is a powerful method for cross-sectional transmission electron microscope sample preparation due to being site specific and not limited to certain materials. It has, however, been difficult to apply to many nanostructured materials as they are prone to damage due to extending from the surface. Here we show methods for focused ion beam sample preparation for transmission electron microscopy analysis of such materials, demonstrated on GaAs–GaInP core shell nanowires. We use polymer resin as support and protection and are able to produce cross-sections both perpendicular to and parallel with the substrate surface with minimal damage. Consequently, nanowires grown perpendicular to the substrates could be imaged both in plan and side view, including the nanowire–substrate interface in the latter case. Using the methods presented here we could analyze the faceting and homogeneity of hundreds of adjacent nanowires in a single lamella.

Nanocomposite Polyurethane Foams Via POSS Blends

2002 ◽  
Vol 733 ◽  
Author(s):  
Brock McCabe ◽  
Steven Nutt ◽  
Brent Viers ◽  
Tim Haddad
Keyword(s):  
High Temperature ◽  
Sample Preparation ◽  
Room Temperature ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Polyurethane Foams ◽  
Development Projects ◽  
Polymer Systems ◽  
Polyurethane Resin ◽  
Military Development

AbstractPolyhedral Oligomeric Silsequioxane molecules have been incorporated into a commercial polyurethane formulation to produce nanocomposite polyurethane foam. This tiny POSS silica molecule has been used successfully to enhance the performance of polymer systems using co-polymerization and blend strategies. In our investigation, we chose a high-temperature MDI Polyurethane resin foam currently used in military development projects. For the nanofiller, or “blend”, Cp7T7(OH)3 POSS was chosen. Structural characterization was accomplished by TEM and SEM to determine POSS dispersion and cell morphology, respectively. Thermal behavior was investigated by TGA. Two methods of TEM sample preparation were employed, Focused Ion Beam and Ultramicrotomy (room temperature).

An Study of Influence of Imperfections on the Delamination of Diamond-Like Carbon Films

2002 ◽  
Vol 719 ◽  
Author(s):  
Myoung-Woon Moon ◽  
Kyang-Ryel Lee ◽  
Jin-Won Chung ◽  
Kyu Hwan Oh
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Imaging System ◽  
Ion Beam ◽  
Carbon Films ◽  
Diamond Like Carbon ◽  
Glass Substrates ◽  
Atomic Force ◽  
Initiation And Propagation

AbstractThe role of imperfections on the initiation and propagation of interface delaminations in compressed thin films has been analyzed using experiments with diamond-like carbon (DLC) films deposited onto glass substrates. The surface topologies and interface separations have been characterized by using the Atomic Force Microscope (AFM) and the Focused Ion Beam (FIB) imaging system. The lengths and amplitudes of numerous imperfections have been measured by AFM and the interface separations characterized on cross sections made with the FIB. Chemical analysis of several sites, performed using Auger Electron Spectroscopy (AES), has revealed the origin of the imperfections. The incidence of buckles has been correlated with the imperfection length.

Automated Diagonal Slice and View Solution for 3D Device Structure Analysis

2018 ◽  
Author(s):  
Sang Hoon Lee ◽  
Jeff Blackwood ◽  
Stacey Stone ◽  
Michael Schmidt ◽  
Mark Williamson ◽  
...  
Keyword(s):  
Cross Section ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Image Data ◽  
Planar Surface ◽  
Device Structure ◽  
Cross Sectional ◽  
Device Structures ◽  
The Cross ◽  
Planar Analysis

Abstract The cross-sectional and planar analysis of current generation 3D device structures can be analyzed using a single Focused Ion Beam (FIB) mill. This is achieved using a diagonal milling technique that exposes a multilayer planar surface as well as the cross-section. this provides image data allowing for an efficient method to monitor the fabrication process and find device design errors. This process saves tremendous sample-to-data time, decreasing it from days to hours while still providing precise defect and structure data.

TEM Sample Preparation Tricks for Advanced DRAMs

2015 ◽  
Author(s):  
Ching Shan Sung ◽  
Hsiu Ting Lee ◽  
Jian Shing Luo
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Sample Preparation ◽  
Integrated Circuit ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Tem Analysis ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Characterization Of Materials

Abstract Transmission electron microscopy (TEM) plays an important role in the structural analysis and characterization of materials for process evaluation and failure analysis in the integrated circuit (IC) industry as device shrinkage continues. It is well known that a high quality TEM sample is one of the keys which enables to facilitate successful TEM analysis. This paper demonstrates a few examples to show the tricks on positioning, protection deposition, sample dicing, and focused ion beam milling of the TEM sample preparation for advanced DRAMs. The micro-structures of the devices and samples architectures were observed by using cross sectional transmission electron microscopy, scanning electron microscopy, and optical microscopy. Following these tricks can help readers to prepare TEM samples with higher quality and efficiency.

FIB Enhancement of Mechanically Polished Cross-sections

2019 ◽  
Author(s):  
Becky Holdford
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Cross Sections ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
High Resolution Imaging ◽  
Chemical Attack ◽  
Resolution Imaging ◽  
Scanning Electron

Abstract On mechanically polished cross-sections, getting a surface adequate for high-resolution imaging is sometimes beyond the analyst’s ability, due to material smearing, chipping, polishing media chemical attack, etc.. A method has been developed to enable the focused ion beam (FIB) to re-face the section block and achieve a surface that can be imaged at high resolution in the scanning electron microscope (SEM).

Sign in / Sign up

Export Citation Format

Share Document