scholarly journals Economical droplet-based microfluidic production of [18F]FET and [18F]Florbetaben suitable for human use

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ksenia Lisova ◽  
Jia Wang ◽  
Tibor Jacob Hajagos ◽  
Yingqing Lu ◽  
Alexander Hsiao ◽  
...  

AbstractCurrent equipment and methods for preparation of radiopharmaceuticals for positron emission tomography (PET) are expensive and best suited for large-scale multi-doses batches. Microfluidic radiosynthesizers have been shown to provide an economic approach to synthesize these compounds in smaller quantities, but can also be scaled to clinically-relevant levels. Batch microfluidic approaches, in particular, offer significant reduction in system size and reagent consumption. Here we show a simple and rapid technique to concentrate the radioisotope, prior to synthesis in a droplet-based radiosynthesizer, enabling production of clinically-relevant batches of [18F]FET and [18F]FBB. The synthesis was carried out with an automated synthesizer platform based on a disposable Teflon-silicon surface-tension trap chip. Up to 0.1 mL (4 GBq) of radioactivity was used per synthesis by drying cyclotron-produced aqueous [18F]fluoride in small increments directly inside the reaction site. Precursor solution (10 µL) was added to the dried [18F]fluoride, the reaction chip was heated for 5 min to perform radiofluorination, and then a deprotection step was performed with addition of acid solution and heating. The product was recovered in 80 µL volume and transferred to analytical HPLC for purification. Purified product was formulated via evaporation and resuspension or a micro-SPE formulation system. Quality control testing was performed on 3 sequential batches of each tracer. The method afforded production of up to 0.8 GBq of [18F]FET and [18F]FBB. Each production was completed within an hour. All batches passed quality control testing, confirming suitability for human use. In summary, we present a simple and efficient synthesis of clinically-relevant batches of [18F]FET and [18F]FBB using a microfluidic radiosynthesizer. This work demonstrates that the droplet-based micro-radiosynthesizer has a potential for batch-on-demand synthesis of 18F-labeled radiopharmaceuticals for human use.

1989 ◽  
Vol 2 (3) ◽  
pp. 185-190
Author(s):  
Ronald G. Manning ◽  
Robert G. Wolfangel

Positron emission tomography (PET) is an imaging process that relies on positron-emitting nuclides with very short physical half-lives (ranging from seconds to minutes). Exceptional resolution in PET imaging enables studies of the CNS (eg, highlighting deviant cell metabolism), and cardiovascular system (eg, identifying areas of reduced blood flow before coronary artery bypass surgery), among others. Increasing in popularity, PET radiopharmaceuticals pose a unique challenge to the nuclear pharmacist relative to product synthesis and quality control testing. Establishment of process validation programs with emphasis on quality, purity, and safety is all important. Various elements of process validation and quality control testing are discussed as they pertain to PET radiopharmaceuticals and the professional role of the nuclear pharmacist.


Author(s):  
Y. Zhao ◽  
L. Zhang ◽  
W. Ma ◽  
P. Zhang ◽  
T. Zhao

The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth’s surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of “five-in-one” quality control that is constituted by “quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions” by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.


1966 ◽  
Vol 05 (02) ◽  
pp. 67-74 ◽  
Author(s):  
W. I. Lourie ◽  
W. Haenszeland

Quality control of data collected in the United States by the Cancer End Results Program utilizing punchcards prepared by participating registries in accordance with a Uniform Punchcard Code is discussed. Existing arrangements decentralize responsibility for editing and related data processing to the local registries with centralization of tabulating and statistical services in the End Results Section, National Cancer Institute. The most recent deck of punchcards represented over 600,000 cancer patients; approximately 50,000 newly diagnosed cases are added annually.Mechanical editing and inspection of punchcards and field audits are the principal tools for quality control. Mechanical editing of the punchcards includes testing for blank entries and detection of in-admissable or inconsistent codes. Highly improbable codes are subjected to special scrutiny. Field audits include the drawing of a 1-10 percent random sample of punchcards submitted by a registry; the charts are .then reabstracted and recoded by a NCI staff member and differences between the punchcard and the results of independent review are noted.


2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Chih-Chuen Lin ◽  
Phani Motamarri ◽  
Vikram Gavini

AbstractWe present a tensor-structured algorithm for efficient large-scale density functional theory (DFT) calculations by constructing a Tucker tensor basis that is adapted to the Kohn–Sham Hamiltonian and localized in real-space. The proposed approach uses an additive separable approximation to the Kohn–Sham Hamiltonian and an L1 localization technique to generate the 1-D localized functions that constitute the Tucker tensor basis. Numerical results show that the resulting Tucker tensor basis exhibits exponential convergence in the ground-state energy with increasing Tucker rank. Further, the proposed tensor-structured algorithm demonstrated sub-quadratic scaling with system-size for both systems with and without a gap, and involving many thousands of atoms. This reduced-order scaling has also resulted in the proposed approach outperforming plane-wave DFT implementation for systems beyond 2000 electrons.


2011 ◽  
Vol 314-316 ◽  
pp. 2433-2438
Author(s):  
Wei Zhi Wang

By only applying a after the event exam in the quality control of the batch production is not enough to meet the needs of modern large-scale production. To a certain extent, modern quality control is a dynamic process of the steady-state judge and adjustment. A simple and reliable steady-state judge rule and method is the premise to guarantee the normal operation. This paper provides a quantitative method to evaluate production process steady-state by analyzing influence factors based on mathematical statistics. The method is both suitable for simple production process and complex production process with sub-processes.


Author(s):  
Alexander Miropolsky ◽  
Anath Fischer

The inspection of machined objects is one of the most important quality control tasks in the manufacturing industry. Contemporary scanning technologies have provided the impetus for the development of computational inspection methods, where the computer model of the manufactured object is reconstructed from the scan data, and then verified against its digital design model. Scan data, however, are typically very large scale (i.e., many points), unorganized, noisy, and incomplete. Therefore, reconstruction is problematic. To overcome the above problems the reconstruction methods may exploit diverse feature data, that is, diverse information about the properties of the scanned object. Based on this concept, the paper proposes a new method for denoising and reduction in scan data by extended geometric filter. The proposed method is applied directly on the scanned points and is automatic, fast, and straightforward to implement. The paper demonstrates the integration of the proposed method into the framework of the computational inspection process.


Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 598
Author(s):  
Jean-François Pratte ◽  
Frédéric Nolet ◽  
Samuel Parent ◽  
Frédéric Vachon ◽  
Nicolas Roy ◽  
...  

Analog and digital SiPMs have revolutionized the field of radiation instrumentation by replacing both avalanche photodiodes and photomultiplier tubes in many applications. However, multiple applications require greater performance than the current SiPMs are capable of, for example timing resolution for time-of-flight positron emission tomography and time-of-flight computed tomography, and mitigation of the large output capacitance of SiPM array for large-scale time projection chambers for liquid argon and liquid xenon experiments. In this contribution, the case will be made that 3D photon-to-digital converters, also known as 3D digital SiPMs, have a potentially superior performance over analog and 2D digital SiPMs. A review of 3D photon-to-digital converters is presented along with various applications where they can make a difference, such as time-of-flight medical imaging systems and low-background experiments in noble liquids. Finally, a review of the key design choices that must be made to obtain an optimized 3D photon-to-digital converter for radiation instrumentation, more specifically the single-photon avalanche diode array, the CMOS technology, the quenching circuit, the time-to-digital converter, the digital signal processing and the system level integration, are discussed in detail.


2001 ◽  
Vol 29 (3-4) ◽  
pp. 305-322 ◽  
Author(s):  
John V. Jacobi ◽  
Nicole Huberfeld

The Institute of Medicine (IOM) has returned the problem of medical error to the top of the health-care agenda. Its report that 44,000 to 98,000 patients die each year as a result of medical errors in American hospitals has renewed scholarly interest in health system quality control. In To Err Is Human, the IOM provides a vivid picture of a health-care system riven with serious quality problems. It calls for systems-based error-reduction methods borrowed from other high-risk industries and forcefully argues against the traditional tendency to assign accountability primarily to individual physicians. Most errors, the IOM argues, can be successfully addressed by engineering systemic fail-safe protections against the inevitable failings of human actors.


2010 ◽  
Vol 46 (3) ◽  
pp. 563-569 ◽  
Author(s):  
Marina Bicalho Silveira ◽  
Marcella Araugio Soares ◽  
Eduardo Sarmento Valente ◽  
Samira Soares Waquil ◽  
Andréa Vidal Ferreira ◽  
...  

18F-Sodium fluoride (Na18F) is a radiopharmaceutical used for diagnosis in nuclear medicine by positron emission tomography (PET) imaging. Bone scintigraphy is normally performed using 99mTc-MDP. However, 18F PET scans promise high quality imaging with increased resolution and improved sensitivity and specificity. In order to make available a tool for more specific studies of tumors and non-oncological diseases of bone tissue, the UPPR/CDTN team undertook the production and quality control of Na18F injectable solution with the physical-chemical, microbiological and biological characteristics recommended in the U.S. Pharmacopeia. Na18F radiochemical purity was 96.7 ± 1.3 %, with Rf= 0.026 ± 0.006. The product presented a pH of 5.3 ± 0.6, half life of 109.0 ± 0.8 minutes, endotoxin limit < 5.0 EU.mL-1 and no microbial contaminants. The biodistribution of Na18F was similar to that described in the literature, with a clearance of 0.19 mL.min-1 and distribution volume of 18.76 mL. The highest bone concentration (5.0 ± 0.5 %ID.g-1) was observed 20 minutes after injection. Na18F produced at the UPPR presented all the quality assurance requirements of the U.S. Pharmacopeia and can be safely used for clinical bone imaging.


Sign in / Sign up

Export Citation Format

Share Document