Low-cost rapid prototyping and assembly of open microfluidic device for 3D vascularized organ-on-a-chip

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Qinyu Li ◽  
Kai Niu ◽  
Ding Wang ◽  
Lian Xuan ◽  
Xiaolin Wang

Reconstruction of 3D vascularized microtissue within microfabricated devices has rapidly developed in biomedical engineering, which can better mimic tissue microphysiological function and accurately model human diseases in vitro. However, the...

TECHNOLOGY ◽  
2016 ◽  
Vol 04 (04) ◽  
pp. 234-239 ◽  
Author(s):  
Daniel P. Yen ◽  
Yuta Ando ◽  
Keyue Shen

Micromilling has great potential in producing microdevices for lab-on-a-chip and organ-on-a-chip applications, but has remained under-utilized due to the high machinery costs and limited accessibility. In this paper, we assessed the machining capabilities of a low-cost 3-D mill in polycarbonate material, which were showcased by the production of microfluidic devices. The study demonstrates that this particular mill is well suited for the fabrication of multi-scale microdevices with feature sizes from micrometers to centimeters.


Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1542
Author(s):  
Sadeq Abu-Dawas ◽  
Hawra Alawami ◽  
Mohammed Zourob ◽  
Qasem Ramadan

A low-cost, versatile, and reconfigurable fluidic routing system and chip assembly have been fabricated and tested. The platform and its accessories were fabricated in-house without the need for costly and specialized equipment nor specific expertise. An agarose-based artificial membrane was integrated into the chips and employed to test the chip-to-chip communication in various configurations. Various chip assemblies were constructed and tested which demonstrate the versatile utility of the fluidic routing system that enables the custom design of the chip-to-chip communication and the possibility of fitting a variety of (organ-on-a-chip)-based biological models with multicell architectures. The reconfigurable chip assembly would enable selective linking/isolating the desired chip/compartment, hence allowing the study of the contribution of specific cell/tissue within the in vitro models.


Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 872
Author(s):  
Francesco Costa ◽  
Luigi Falzetti ◽  
Nicola Baldini ◽  
Sofia Avnet

Microfluidic principles have been widely applied for more than 30 years to solve biological and micro-electromechanical problems. Despite the numerous advantages, microfluidic devices are difficult to manage as their handling comes with several technical challenges. We developed a new portable tool, the microfluidic trainer (MT), that assesses the operator handling skills and that may be used for maintaining or improving the ability to inject fluid in the inlet of microfluidic devices for in vitro cell culture applications. After several tests, we optimized the MT tester cell to reproduce the real technical challenges of a microfluidic device. In addition to an exercise path, we included an overfilling indicator and a correct infilling indicator at the inlet (control path). We manufactured the MT by engraving a 3 mm-high sheet of methacrylate with 60W CO2 laser plotter to create multiple capillary paths. We validated the device by enrolling 21 volunteers (median age 33) to fill both the MT and a commercial microfluidic device. The success rate obtained with MT significantly correlated with those of a commercial microfluidic culture plate, and its 30 min-continuous use for three times significantly improved the performance. Overall, our data demonstrate that MT is a valid assessment tool of individual performances in using microfluidic devices and may represent a low-cost solution to training, improve or warm up microfluidic handling skills.


2015 ◽  
Author(s):  
Kyall J. Pocock ◽  
Xiaofang Gao ◽  
Chenxi Wang ◽  
Craig Priest ◽  
Clive A. Prestidge ◽  
...  

2017 ◽  
Vol 68 (3) ◽  
pp. 453-458 ◽  
Author(s):  
Daniel Besnea ◽  
Alina Spanu ◽  
Iuliana Marlena Prodea ◽  
Gheorghita Tomescu ◽  
Iolanda Constanta Panait

The paper points out the advantages of rapid prototyping for improving the performances/constructive optimization of mixing devices used in process industries, here exemplified to propeller types ones. The multidisciplinary optimization of the propeller profile affords its design using parametric CAD methods. Starting from the mathematical curve equations proposed for the blade profile, it was determined its three-dimensional virtual model. The challenge has been focused on the variation of propeller pitch and external diameter. Three dimensional ranges were manufactured using the additive manufacturing process with Marker Boot 3D printer. The mixing performances were tested on the mixing equipment measuring the minimum rotational speed and the correspondent shaft torque for complete suspension achieved for each of the three models. The virtual and rapid prototyping method is newly proposed by the authors to obtain the basic data for scale up of the mixing systems, in the case of flexible production (of low quantities), in which both the nature and concentration of the constituents in the final product varies often. It is an efficient and low cost method for the rapid identification of the optimal mixing device configuration, which contributes to the costs reduction and to the growing of the output.


Author(s):  
Moema S. Santana ◽  
Rute Lopes ◽  
Isabela H. Peron ◽  
Carla R. Cruz ◽  
Ana M. M. Gaspar ◽  
...  

Background: Hepatitis C virus infection is a significant global health burden, which causes acute or chronic hepatitis. The acute hepatitis C is generally asymptomatic and progresses to cure, while persistent infection can progress to chronic liver disease and extrahepatic manifestations. Standard treatment is expensive, poorly tolerated, and has variable sustained virologic responses amongst the different viral genotypes. New therapies involve direct acting antivirals; however, it is also very expensive and may not be accessible for all patients worldwide. In order to provide a complementary approach to the already existing therapies, natural bioactive compounds are investigated as to their several biologic activities, such as direct antiviral properties against hepatitis C, and effects on mitigating chronic progression of the disease, which includes hepatoprotective, antioxidant, anticarcinogenic and anti-inflammatory activities; additionally, these compounds present advantages, as chemical diversity, low cost of production and milder or inexistent side effects. Objective: To present a broad perspective on hepatitis C infection, the chronic disease, and natural compounds with promising anti-HCV activity. Methods: This review consists of a systematic review study about the natural bioactive compounds as a potential therapy for hepatitis C infection. Results: The quest for natural products have yielded compounds with biologic activity, including viral replication inhibition in vitro, demonstrating antiviral activity against hepatitis C. Conclusion: One of the greatest advantages of using natural molecules from plant extracts is the low cost of production, not requiring chemical synthesis, which can lead to less expensive therapies available to low and middle-income countries.


Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.


2021 ◽  
Vol 22 (3) ◽  
pp. 1124
Author(s):  
Mafalda Giovanna Reccia ◽  
Floriana Volpicelli ◽  
Eirkiur Benedikz ◽  
Åsa Fex Svenningsen ◽  
Luca Colucci-D’Amato

Neural stem cells represent a powerful tool to study molecules involved in pathophysiology of Nervous System and to discover new drugs. Although they can be cultured and expanded in vitro as a primary culture, their use is hampered by their heterogeneity and by the cost and time needed for their preparation. Here we report that mes-c-myc A1 cells (A1), a neural cell line, is endowed with staminal properties. Undifferentiated/proliferating and differentiated/non-proliferating A1 cells are able to generate neurospheres (Ns) in which gene expression parallels the original differentiation status. In fact, Ns derived from undifferentiated A1 cells express higher levels of Nestin, Kruppel-like factor 4 (Klf4) and glial fibrillary protein (GFAP), markers of stemness, while those obtained from differentiated A1 cells show higher levels of the neuronal marker beta III tubulin. Interestingly, Ns differentiation, by Epidermal Growth Factors (EGF) and Fibroblast Growth Factor 2 (bFGF) withdrawal, generates oligodendrocytes at high-yield as shown by the expression of markers, Galactosylceramidase (Gal-C) Neuron-Glial antigen 2 (NG2), Receptor-Interacting Protein (RIP) and Myelin Basic Protein (MBP). Finally, upon co-culture, Ns-A1-derived oligodendrocytes cause a redistribution of contactin-associated protein (Caspr/paranodin) protein on neuronal cells, as primary oligodendrocytes cultures, suggesting that they are able to form compact myelin. Thus, Ns-A1-derived oligodendrocytes may represent a time-saving and low-cost tool to study the pathophysiology of oligodendrocytes and to test new drugs.


Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 915
Author(s):  
Gözde Dursun ◽  
Muhammad Umer ◽  
Bernd Markert ◽  
Marcus Stoffel

(1) Background: Bioreactors mimic the natural environment of cells and tissues by providing a controlled micro-environment. However, their design is often expensive and complex. Herein, we have introduced the development of a low-cost compression bioreactor which enables the application of different mechanical stimulation regimes to in vitro tissue models and provides the information of applied stress and strain in real-time. (2) Methods: The compression bioreactor is designed using a mini-computer called Raspberry Pi, which is programmed to apply compressive deformation at various strains and frequencies, as well as to measure the force applied to the tissue constructs. Besides this, we have developed a mobile application connected to the bioreactor software to monitor, command, and control experiments via mobile devices. (3) Results: Cell viability results indicate that the newly designed compression bioreactor supports cell cultivation in a sterile environment without any contamination. The developed bioreactor software plots the experimental data of dynamic mechanical loading in a long-term manner, as well as stores them for further data processing. Following in vitro uniaxial compression conditioning of 3D in vitro cartilage models, chondrocyte cell migration was altered positively compared to static cultures. (4) Conclusion: The developed compression bioreactor can support the in vitro tissue model cultivation and monitor the experimental information with a low-cost controlling system and via mobile application. The highly customizable mold inside the cultivation chamber is a significant approach to solve the limited customization capability of the traditional bioreactors. Most importantly, the compression bioreactor prevents operator- and system-dependent variability between experiments by enabling a dynamic culture in a large volume for multiple numbers of in vitro tissue constructs.


Aerospace ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 74
Author(s):  
Alejandro Sobron ◽  
David Lundström ◽  
Petter Krus

Testing of untethered subscale models, often referred to as subscale flight testing, has traditionally had a relatively minor, yet relevant use in aeronautical research and development. As recent advances in electronics, rapid prototyping and unmanned-vehicle technologies expand its capabilities and lower its cost, this experimental method is seeing growing interest across academia and the industry. However, subscale models cannot meet all similarity conditions required for simulating full-scale flight. This leads to a variety of approaches to scaling and to other alternative applications. Through a literature review and analysis of different scaling strategies, this study presents an overall picture of how subscale flight testing has been used in recent years and synthesises its main issues and practical limitations. Results show that, while the estimation of full-scale characteristics is still an interesting application within certain flight conditions, subscale models are progressively taking a broader role as low-cost technology-testing platforms with relaxed similarity constraints. Different approaches to tackle the identified practical challenges, implemented both by the authors and by other organisations, are discussed and evaluated through flight experiments.


Sign in / Sign up

Export Citation Format

Share Document