scholarly journals Synthesis of activated carbon doped with transition metals for hydrogen storage

2019 ◽  
Vol 90 ◽  
pp. 01016 ◽  
Author(s):  
Nazlina Ya’aini ◽  
Arjun Pillay A/L Gopala Krishnan ◽  
Adnan Ripin
Keyword(s):  
Activated Carbon ◽  
Transition Metals ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Activated Carbons ◽  
High Porosity ◽  
Carbon Doped ◽  
Copper Nickel ◽  
Bet Analysis ◽  
Oxygen Groups

Carbon materials with high porosity and surface area such as activated carbons with a combination of metal possess great materials to obtain maximum hydrogen adsorption via the hydrogen spillover effect. The properties of activated carbon doped with metals (copper, nickel and palladium) were studied to evaluate the capacity of hydrogen sorption on the materials. Characteristics of the activated carbon doped with copper (AC-Cu), nickel (AC-Ni) and palladium (AC-Pd) were evaluated using particle density test, Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD) and surface and pore analysis (BET). The performance of hydrogen adsorption of the materials was carried out at different pressures of 50, 100 and 150 psi. Characterization of the materials shows that FTIR spectroscopy manage to detect surface functional groups meanwhile the carbon structure and metal content was determined using XRD. BET analysis shows the presence of oxygen groups was decrease the specific surface area whereas the presence of transition metals had increased the surface area. Hydrogen adsorption test at 150 psi indicates that oxygen groups are not a good adsorption characteristic with only a maximum of 0.39 wt% of hydrogen was adsorbed compared to pristine activated carbon’s 0.42 wt% at 150 psi. The presence of transition metals, copper, nickel and palladium increased the overall hydrogen uptake with 0.52 wt%, 0.44 wt% and 0.62 wt% respectively at 150 psi.

scholarly journals Pinecone-Derived Activated Carbons as an Effective Medium for Hydrogen Storage

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2237
Author(s):  
Sara Stelitano ◽  
Giuseppe Conte ◽  
Alfonso Policicchio ◽  
Alfredo Aloise ◽  
Giovanni Desiderio ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Textural Properties ◽  
Biomass Waste ◽  
Wavelength Dispersive Spectrometry

Pinecones, a common biomass waste, has an interesting composition in terms of cellulose and lignine content that makes them excellent precursors in various activated carbon production processes. The synthesized, nanostructured, activated carbon materials show textural properties, a high specific surface area, and a large volume of micropores, which are all features that make them suitable for various applications ranging from the purification of water to energy storage. Amongst them, a very interesting application is hydrogen storage. For this purpose, activated carbon from pinecones were prepared using chemical activation with different KOH/precursor ratios, and their hydrogen adsorption capacity was evaluated at liquid nitrogen temperatures (77 K) at pressures of up to 80 bar using a Sievert’s type volumetric apparatus. Regarding the comprehensive characterization of the samples’ textural properties, the measurement of the surface area was carried out using the Brunauer–Emmett–Teller method, the chemical composition was investigated using wavelength-dispersive spectrometry, and the topography and long-range order was estimated using scanning electron microscopy and X-ray diffraction, respectively. The hydrogen adsorption properties of the activated carbon samples were measured and then fitted using the Langmuir/ Töth isotherm model to estimate the adsorption capacity at higher pressures. The results showed that chemical activation induced the formation of an optimal pore size distribution for hydrogen adsorption centered at about 0.5 nm and the proportion of micropore volume was higher than 50%, which resulted in an adsorption capacity of 5.5 wt% at 77 K and 80 bar; this was an increase of as much as 150% relative to the one predicted by the Chahine rule.

scholarly journals The effects of activation conditions on physical properties of activated carbon

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 7640-7647
Author(s):  
Yan Luo ◽  
Kang Wang ◽  
Ling Fei
Keyword(s):  
Activated Carbon ◽  
Physical Properties ◽  
Surface Area ◽  
Pore Volume ◽  
Specific Volume ◽  
Activated Carbons ◽  
Weight Ratio ◽  
Total Pore Volume ◽  
High Porosity ◽  
Activation Conditions

Porous carbons with a high porosity were successfully produced from fast pyrolysis pine wood char via a thermochemical method in which KOH was used as chemical activator. The effects of various weight ratios of KOH to pyrolysis char (0.65:1, 0.7:1, 1.0:1, 1.35:1, and 1.7:1) on the physical properties of activated carbons were investigated. When the weight ratio of KOH to pyrolysis char was 1.35:1, the prepared activated carbon had the highest surface area of 1140 m2/g with a total pore volume of 0.71 cm3/g, a microporous surface area of 957 m2/g, and a microporous specific volume of 0.51 cm3/g. As the weight ratio of KOH to pyrolysis char increased from 0.65 to 1.35, the prepared activated carbon had increases in total surface area, total pore volume, microporous surface area, and specific volume of micropores. However, there was a reverse trend when the weight ratio of KOH to pyrolysis char was higher than 1.35. The use of nitrogen as a flow gas resulted in much more developed activated carbon than without nitrogen. The experiment results suggested that activated carbon with high surface area could be prepared from pyrolysis char by adjusting the activation conditions.

Preparation of Capacitor’s Electrode from Coconut Shell

2014 ◽  
Vol 875-877 ◽  
pp. 1585-1589
Author(s):  
Arenst Andreas Arie ◽  
Joong Kee Lee
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Electrode Materials ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Coconut Shell ◽  
Bet Surface Area ◽  
Type I ◽  
Activation Temperature ◽  
Bet Analysis

Activated carbons were prepared from coconut shell by chemical activation method and utilized as electrode materials for electrochemical double layer capacitor (EDLC). A preliminary characteristic of activated carbon from coconut shell includes the Brunnaeur Emmett Teller (BET) analysis and cyclic voltammetry measurements. The BET surface area is not affected by the variation of activation temperature as both of the samples showed BET surface area of about 850-870 m2g-1. The N2 adsorption–desorption isotherms showed that the sample exhibited type I characteristics according to IUPAC classification, which confirms its micro-porosity. Compared with the un-activated carbon samples, the activated ones exhibited the better electrochemical properties with a specific capacitance of 150 F g−1 at a scan rate of 2 mV s−1. The good performance of activated carbon is attributed to the enhancement of surface area due to the KOH pretreatment which can open new pores accessible for the ionic transport

scholarly journals Physico-chemical characterization of powdered activated carbons obtained by thermo-chemical conversion of brown municipal waste

2011 ◽  
Vol 65 (3) ◽  
pp. 241-247
Author(s):  
Milan Momcilovic ◽  
Milovan Purenovic ◽  
Milena Miljkovic ◽  
Aleksandar Bojic ◽  
Aleksandra Zarubica ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Pore Distribution ◽  
Municipal Waste ◽  
Horse Chestnut ◽  
Physico Chemical ◽  
Developed Surface ◽  
Oxygen Groups

Cones of the European Black pine and Horse chestnut kernel, regarded as brown municipal waste, was utilized in this work as a precursor for powdered activated carbons. Chemical activation was employed at 500?C in inert atmosphere of nitrogen. Standard physico-chemical analyses were performed to examine obtained products. FTIR method was employed to determine fuctional groups which were found to be typical for activated carbons. Acidic oxygen groups were quantitatively determined using Boehm titrations. It was established that carboxylic groups on pine cone activated carbon, and phenolic groups on chestnut kernel activated carbon were dominant from all acidic oxygen groups. Since both contact pH and pHPZC were determined to be fairly acidic, it could be concluded that obtained activated carbons belong to L-type. Shape and layout of micrometer dimensioned particles were observed by scanning electron microscopy. Particles of different shapes and dimensions along with small cracks and wide crevices and voids were noticed. Textural analysis was used to determine specific surface area and pore distribution of obtained activated carbons. Obtained products possess highly developed surface area and wide pore distribution.

scholarly journals Optimisation of durian peel based activated carbon preparation conditions for dye removal

2013 ◽  
Vol 16 (1) ◽  
pp. 22-31
Author(s):  
Phung Thi Kim Le ◽  
Kien Anh Le
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Surface Area ◽  
Dye Removal ◽  
Activated Carbons ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Impregnation Ratio ◽  
Carbon Production ◽  
Removal Capacity

Agricultural wastes are considered to be a very important feedstock for activated carbon production as they are renewable sources and low cost materials. This study present the optimize conditions for preparation of durian peel activated carbon (DPAC) for removal of methylene blue (MB) from synthetic effluents. The effects of carbonization temperature (from 673K to 923K) and impregnation ratio (from 0.2 to 1.0) with potassium hydroxide KOH on the yield, surface area and the dye adsorbed capacity of the activated carbons were investigated. The dye removal capacity was evaluated with methylene blue. In comparison with the commercial grade carbons, the activated carbons from durian peel showed considerably higher surface area especially in the suitable temperate and impregnation ratio of activated carbon production. Methylene blue removal capacity appeared to be comparable to commercial products; it shows the potential of durian peel as a biomass source to produce adsorbents for waste water treatment and other application. Optimize condition for preparation of DPAC determined by using response surface methodology was at temperature 760 K and IR 1.0 which resulted the yield (51%), surface area (786 m2/g), and MB removal (172 mg/g).

scholarly journals Preparation and characterization of activated carbons from albizia saman pod

2017 ◽  
Vol 36 (3) ◽  
pp. 44-53
Author(s):  
G. D. Akpen ◽  
M. I. Aho ◽  
N. Baba
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Activated Carbons ◽  
High Surface ◽  
High Surface Area ◽  
Volatile Matter ◽  
Sieve Analysis ◽  
Albizia Saman ◽  
Temperature Surface

Activated carbon was prepared from the pods of Albizia saman for the purpose of converting the waste to wealth. The pods were thoroughly washed with water to remove any dirt, air- dried and cut into sizes of 2-4 cm. The prepared pods were then carbonised in a muffle furnace at temperatures of 4000C, 5000C, 6000C ,7000C and 8000C for 30 minutes. The same procedure was repeated for 60, 90, 120 and 150 minutes respectively. Activation was done using impregnationratios of 1:12, 1:6, 1:4, 1:3, and 1:2 respectively of ZnCl2 to carbonised Albizia saman pods by weight. The activated carbon was then dried in an oven at 1050C before crushing for sieve analysis. The following properties of the produced Albizia saman pod activated carbon (ASPAC) were determined: bulk density, carbon yield, surface area and ash, volatile matter and moisture contents. The highest surface area of 1479.29 m2/g was obtained at the optimum impregnation ratio, carbonization time and temperature of 1:6, 60 minutes and 5000C respectively. It was recommended that activated carbon should be prepared from Albizia saman pod with high potential for adsorption of pollutants given the high surface area obtained.Keywords: Albizia saman pod, activated carbon, carbonization, temperature, surface area

scholarly journals Adsorption of Paracetamol in Hospital Wastewater Through Activated Carbon Filters

2019 ◽  
Vol 11 (9) ◽  
pp. 2672 ◽  
Author(s):  
Antonio Macías-García ◽  
Justo García-Sanz-Calcedo ◽  
Juan Pablo Carrasco-Amador ◽  
Raúl Segura-Cruz
Keyword(s):  
Activated Carbon ◽  
Kinetic Study ◽  
Adsorption Mechanism ◽  
Activated Carbons ◽  
Chemical Characterization ◽  
Pharmaceutical Products ◽  
Hospital Wastewater ◽  
Biological Degradation ◽  
Oxygen Groups ◽  
Two Stages

In recent years, pharmaceutical products have been causing a serious environmental problem in hospital wastewater and water purification plants. The elimination of these pollutants is difficult due to their resistance to biological degradation. Paracetamol has been detected in higher concentrations in hospital wastewater than in other buildings. Activated carbons are a good material for removing paracetamol from hospital wastewater. One of the starting materials to obtain activated carbons is kenaf, which is an easy plant to cultivate. To study the elimination of paracetamol from hospital wastewater by activated carbon, the textural and chemical characterization of activated carbon, as well as the kinetic study and the analysis of the paracetamol adsorption mechanism by the adsorbent, have been carried out. The activated carbon samples studied are micro-mesoporous, with high specific surface values. The chemical composition with presence of oxygen groups favours the adsorption process. The adsorption kinetics were adjusted to a pseudo-second order model. The adsorption mechanism followed the intraparticular diffusion model, carried out in two stages: a fast first stage on the surface of the adsorbent and a slow one inside the pore. Based on the kinetic study, the use of this type of carbon is a good application for the removal of paracetamol from hospital wastewater.

scholarly journals Parabens Adsorption onto Activated Carbon: Relation with Chemical and Structural Properties

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4313 ◽  
Author(s):  
Astrid Roxanna Moreno-Marenco ◽  
Liliana Giraldo ◽  
Juan Carlos Moreno-Piraján
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Surface Area ◽  
Endocrine Disruptor ◽  
Emerging Contaminants ◽  
Activated Carbons ◽  
Elaeis Guineensis ◽  
Acid Sites ◽  
Co2 Atmosphere

Parabens (alkyl-p-hidroxybenzoates) are antimicrobial preservatives used in personal care products, classified as an endocrine disruptor, so they are considered emerging contaminants. A raw version of activated carbons obtained from African palm shell (Elaeis guineensis) modified chemically by impregnation with salts of CaCl2 (GC2), MgCl2 (GM2) and Cu(NO3)2 (GCu2) at 2% wt/v and carbonized in CO2 atmosphere at 1173 K was prepared. The process of adsorption of methyl (MePB) and ethylparaben (EtPB) from aqueous solution on the activated carbons at 18 °C was studied and related to the interactions between the adsorbate and the adsorbent, which can be quantified through the determination of immersion enthalpies in aqueous solutions of corresponding paraben, showing the lowest-value carbon GM2, which has a surface area of 608 m2 × g−1, while the highest values correspond to the activated carbon GCu2, with a surface area of 896 m2 × g−1 and the highest content of surface acid sites (0.42 mmol × g−1), such as lactonic and phenolic compounds, which indicates that the adsorbate–adsorbent interactions are favored by the presence of these, with interaction enthalpies that vary between 5.72 and 51.95 J × g−1 for MePB adsorption and 1.24 and 52.38 J × g−1 for EtPB adsorption showing that the process is endothermic.

scholarly journals Performance of Sweet Potato’s Leaf-Derived Activated Carbon for Hydrogen Sulphide Removal from Biogas

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Geni Juma ◽  
Revocatus Machunda ◽  
Tatiana Pogrebnaya
Keyword(s):  
Activated Carbon ◽  
Adsorption Process ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Carbonization Temperature ◽  
Optimal Test ◽  
Potato Leaf ◽  
Bet Analysis ◽  
S 100 ◽  
Activation Ratio

In this study, sweet potato leaf activated carbon (SpLAC) was prepared by the chemical activation method using KOH and applied as an adsorbent for H2S removal from biogas. The study focused on the understanding of the effect of carbonization temperature (Tc), varying KOH : C activation ratio, flow rate (FR) of biogas, and mass of SpLAC on sample adsorption capacity. The BET analysis was performed for both fresh and spent activated carbons as well as for carbonized samples, which were not activated; also, the activated carbon was characterized by XRF and CHNS techniques. The results showed that removal efficiency (RE) of the SpLAC increased with increase carbonization temperature from 600 to 800°C and the mass of sorbent from 0.4 g to 1.0 g. The optimal test conditions were determined: 1.0 g of sorbent with a KOH : C ratio of 1 : 1, Tc=800°C, and FR=0.02 m3/h which resulted in a sorption capacity of about 3.7 g S/100 g of the SpLAC. Our findings corroborated that H2S removal was contributed not only by the adsorption process with the pore available but also by the presence of iron in the sample that reacted with H2S. Therefore, upon successful H2S sorption, SpLAC is suggested as a viable adsorbent for H2S removal from biogas.

Sign in / Sign up

Export Citation Format

Share Document