Mapping QTLs associated with grain yield and yield-related traits under aluminum stress in bread wheat

2020 ◽  
Vol 71 (5) ◽  
pp. 429 ◽  
Author(s):  
Sara Farokhzadeh ◽  
Barat Ali Fakheri ◽  
Nafiseh Mahdi Nezhad ◽  
Sirous Tahmasebi ◽  
Abbas Mirsoleimani ◽  
...  
Keyword(s):  
Linkage Group ◽  
Grain Yield ◽  
Crop Production ◽  
Stem Elongation ◽  
Al Tolerance ◽  
Aluminum Stress ◽  
Epistatic Qtls ◽  
A Genome ◽  
Chloride Hexahydrate ◽  
Stable Qtls

Aluminum (Al) toxicity is one of the major environmental constraints to crop production in acidic soils. The objective of this study was to map quantitative trait loci (QTLs) of yield-related traits associated with tolerance to Al in wheat (Triticum aestivum L.). A recombinant inbred line population of wheat was evaluated under conditions of 800 µm aluminum chloride hexahydrate (AlCL3.6H2O) at tillering, stem-elongation and flowering stages. Single-locus analysis showed that 22 of 79 QTLs identified were putative. These QTLs explained 4.38–12.24% of the total variation of traits in two growing seasons. Based on two-locus analysis, 71 additive and 11 epistatic QTLs were identified, of which 34 additive and three epistatic QTLs had significant interaction with environmental effects. The greatest number of stable QTLs was related to the A genome. Stable QTLs associated with days to heading and grain yield, with no additive × environment interactions, were co-located with Al concentration (on the 2D linkage group) and 1000-grain weight (on the 6B linkage group). The markers linked to major and stable QTLs identified in the present study can be further assessed in other genetic backgrounds and environmental conditions in order to improve marker-assisted selection and Al tolerance in wheat.

scholarly journals Expression GWAS of PGIP1 Identifies STOP1-Dependent and STOP1-Independent Regulation of PGIP1 in Aluminum Stress Signaling in Arabidopsis

2021 ◽  
Vol 12 ◽  
Author(s):  
Raj Kishan Agrahari ◽  
Takuo Enomoto ◽  
Hiroki Ito ◽  
Yuki Nakano ◽  
Emiko Yanase ◽  
...  
Keyword(s):  
Signaling Pathway ◽  
Mixed Linear Model ◽  
Expression Level ◽  
Stress Signaling ◽  
Al Tolerance ◽  
Aluminum Stress ◽  
Al Stress ◽  
A Genome ◽  
Genes Encoding ◽  
No Signaling

To elucidate the unknown regulatory mechanisms involved in aluminum (Al)-induced expression of POLYGALACTURONASE-INHIBITING PROTEIN 1 (PGIP1), which is one of the downstream genes of SENSITIVE TO PROTON RHIZOTOXICITY 1 (STOP1) regulating Al-tolerance genes, we conducted a genome-wide association analysis of gene expression levels (eGWAS) of PGIP1 in the shoots under Al stress using 83 Arabidopsis thaliana accessions. The eGWAS, conducted through a mixed linear model, revealed 17 suggestive SNPs across the genome having the association with the expression level variation in PGIP1. The GWAS-detected SNPs were directly located inside transcription factors and other genes involved in stress signaling, which were expressed in response to Al. These candidate genes carried different expression level and amino acid polymorphisms. Among them, three genes encoding NAC domain-containing protein 27 (NAC027), TRX superfamily protein, and R-R-type MYB protein were associated with the suppression of PGIP1 expression in their mutants, and accordingly, the system affected Al tolerance. We also found the involvement of Al-induced endogenous nitric oxide (NO) signaling, which induces NAC027 and R-R-type MYB genes to regulate PGIP1 expression. In this study, we provide genetic evidence that STOP1-independent NO signaling pathway and STOP1-dependent regulation in phosphoinositide (PI) signaling pathway are involved in the regulation of PGIP1 expression under Al stress.

scholarly journals Fungicide Application Affects Nitrogen Utilization Efficiency, Grain Yield, and Quality of Winter Wheat

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1295
Author(s):  
Ahossi Patrice Koua ◽  
Mirza Majid Baig ◽  
Benedict Chijioke Oyiga ◽  
Jens Léon ◽  
Agim Ballvora
Keyword(s):  
Synergistic Effect ◽  
Grain Yield ◽  
Crop Production ◽  
Agronomic Traits ◽  
Yellow Rust ◽  
Wheat Yield ◽  
Utilization Efficiency ◽  
High Nitrogen ◽  
Available N ◽  
Fungicide Application

Nitrogen (N) is a vital component of crop production. Wheat yield varies significantly under different soil available N. Knowing how wheat responds to or interacts with N to produce grains is essential in the selection of N use efficient cultivars. We assessed in this study variations among wheat genotypes for productivity-related traits under three cropping systems (CS), high-nitrogen with fungicide (HN-WF), high-nitrogen without fungicide (HN-NF) and low-nitrogen without fungicide (LN-NF) in the 2015, 2016 and 2017 seasons. ANOVA results showed genotypes, CS, and their interactions significantly affected agronomic traits. Grain yield (GY) increased with higher leaf chlorophyll content, importantly under CS without N and fungicide supply. Yellow rust disease reduced the GY by 20% and 28% in 2015 and 2016, respectively. Moreover, averaged over growing seasons, GY was increased by 23.78% under CS with N supply, while it was greatly increased, by 52.84%, under CS with both N and fungicide application, indicating a synergistic effect of N and fungicide on GY. Fungicide supply greatly improved the crop ability to accumulate N during grain filling, and hence the grain protein content. Recently released cultivars outperformed the older ones in most agronomic traits including GY. Genotype performance and stability analysis for GY production showed differences in their stability levels under the three CS. The synergistic effect of nitrogen and fungicide on grain yield (GY) and the differences in yield stability levels of recently released wheat cultivars across three CS found in this study suggest that resource use efficiency can be improved via cultivar selection for targeted CS.

EFFECTS OF ALUMINIUM ON THE ADVENTITIOUS ROOT SYSTEM, AERIAL BIOMASS AND GRAIN YIELD OF MAIZE GROWN IN THE FIELD AND IN A RHIZOTRON

2006 ◽  
Vol 42 (3) ◽  
pp. 351-366 ◽  
Author(s):  
J. J. COMIN ◽  
J. BARLOY ◽  
V. HALLAIRE ◽  
F. ZANETTE ◽  
P. R. M. MILLER
Keyword(s):  
Grain Yield ◽  
Root System ◽  
Soil Solution ◽  
Root Length ◽  
Adventitious Root ◽  
Adventitious Roots ◽  
Total Root Length ◽  
Al Tolerance ◽  
Root Branching ◽  
Four Levels

The aim of this work was to study the effects of soluble aluminium on the morphology and growth of the adventitious root system, aerial biomass and grain yield of maize (Zea mays). The analysis focuses on two hybrid cultivars (Al-sensitive HS7777 and Al-tolerant C525M). Experiments were carried out in the field and in a rhizotron in Curitiba, Paraná, Brazil. In the field, four levels of lime application were used: T0 = 0 t ha−1, T1 = 3.5 t ha−1, T2 = 7.0 t ha−1, and T3 = 10.5 t ha−1. Two levels were used in a rhizotron: T0 and T3. In the surface horizon (0–15 cm), the Al concentrations of the soil solution were: T0 = 15, T1 = 5.1, T2 = 4.4, and T3 = 3.1 μM. In the field, neither Al concentration in the soil solution nor cultivar affected the number of primary adventitious roots per internode or the total number of primary adventitious roots. However, root diameter, plant population and grain yield of the two cultivars confirmed the differences in Al tolerance between them. Al was observed to have an adverse effect on the grain yield from C525M, while low yields from HS7777, at all levels of Al, precluded any response to liming. In the rhizotron studies, Al concentration and cultivar affected the root branching and total root length. Cultivar C525M had more branches and total root length than HS7777, mainly at low concentrations of soil Al solution, leading to greater spatial colonization of the soil down to 0.9 m depth.

Yield or profit: alternatives to the development of national crop production

Ekonomika APK ◽  
2021 ◽  
Vol 316 (2) ◽  
pp. 15-25
Author(s):  
Dmytro Zherlitsyn ◽  
Andrii Skrypnyk ◽  
Nataliia Klymenko ◽  
Kateryna Tuzhyk
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Maximum Yield ◽  
Target Function ◽  
Optimization Methods ◽  
Econometric Analysis ◽  
Practical Significance ◽  
Moderate Increase ◽  
Production Research ◽  
The Impact

The purpose of the article is to determine with the help of econometric and optimization methods the priority strategies of agrarian business in the field of crop production and to compare with the existing leaders in the use of innovations in the field of crop production. Research methods. The study is based on the use of econometric analysis methods to build trends in grain yield dynamics in leading countries in the use of innovative agricultural technologies and optimization methods for the study of dominant strategies used by agricultural enterprises in crop production. Research results. As a result of using the declining marginal grain yield depending on the amount of costs, which are determined by the cost of importing technology per 1 ha, the optimal cost values for both maximum yield and maximum profit. It is shown that at certain time intervals the costs of farmers were excessively high not only in terms of profit optimization but also to optimize yields. It is assumed that taking into account the latest innovation trends, agribusiness will move to a strategy of profit maximization Scientific novelty. As a result of econometric analysis it is shown that the use as a target function of yield leads to a significant increase in the variability of this indicator, while a moderate increase in yield is accompanied by significantly less variability. Quantitative indicators of the impact of climate risks on grain yields in Ukraine have been obtained, which explain approximately 50% of the variance in the grain yield indicator in Ukraine. Practical significance. It is shown that the representation of marginal yield in the form of a decreasing linear function is confirmed in practice. Further research, which in the presence of detailed information on the production processes of individual enterprises can be conducted by panel regression (observation points are spaced in space and time), can provide a more detailed picture of the efficiency of individual production components in their areas of interaction. Tabl.: 4. Figs.: 3. Refs.: 19.

Improving Soybean Production Using Light Supplementation at Field-Scale: A Case Study

2021 ◽  
Vol 9 (3) ◽  
pp. 259
Author(s):  
Ernane M Lemes ◽  
Breno N R Azevedo ◽  
Matheus F I Domiciano ◽  
Samuel L Andrade
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Crop Production ◽  
High Efficiency ◽  
Field Scale ◽  
Soybean Crop ◽  
Illumination System ◽  
Progress Curve ◽  
Commercial Area ◽  
Yield Responses

In modern agriculture, there is a growing need for increasing crop efficiency while minimizing environmental impacts. The use of high-efficiency light supplementation to enhance plant development is limited for high-productive crops at field conditions (outdoor). This study evaluated the soybean plant’s yield responses in an open commercial area (field scale) cultivated under conditions of artificial light supplementation. A commercial irrigated (pivot) area received an illumination system for light supplementation (LS) in its inner pivot spans. About 40 hours of LS were applied to the plants during the soybean crop cycle. The area’s outer pivot spans did not receive light supplementation (nLS). The internode number, the plant height, the pods per plant were evaluated weekly to compute the area under the progress curve (AUPC). The grain yield at harvest was also assessed. The AUPC of the internode number, plant height and pods per plant were positively affected by the LS treatment. The regular soybean cycle (nLS) is about 17 weeks; however, the LS harvest occurred three weeks later. Light supplementation increased soybean grain yield by 57.3% and profitability by 180% when compared to nLS. Although light supplementation at field scale poses a challenge, it is now affordable since sustainable field resistant technologies are now available. The present study is the first known report of light supplementation used to improve soybean crop production at field scale.

scholarly journals Effects of Municipal Wastewater Irrigation on Yield and Fertilizer Requirement of Wheat (Triticum aestivum L.) in Bangladesh

2016 ◽  
Vol 14 (1) ◽  
pp. 01-14 ◽  
Author(s):  
M A Mojid ◽  
G C L Wyseure ◽  
S K Biswas
Keyword(s):  
Triticum Aestivum ◽  
Grain Yield ◽  
Fresh Water ◽  
Biomass Production ◽  
Crop Production ◽  
Municipal Wastewater ◽  
Biomass Yield ◽  
Block Design ◽  
Fertilizer Requirement ◽  
Raw Wastewater

Due to increasing scarcity of fresh water, use of unconventional water source (e.g., wastewater) in irrigation has now become important. However, inclusive information on the effects of wastewater on crop production and soil health is necessary for such intervention. This study was designed to evaluate these effects by demonstrating the contribution of municipal wastewater (hereafter called wastewater) on yield and nutrient requirement of wheat (<i>Triticum aestivum</i> L.) cv Shatabdi. Five irrigation treatments - I1, I2, I3, I4 and I5  were tested in a Randomized Complete Block Design (RCBD) with three replications during November-March of 2007-2008, 2008-2009, 2009-2010 at the experimental field of the Bangladesh Agricultural University,  Mymensingh. The treatments I2-I5 consisted of blended wastewater and I1 of fresh water (control). The ratio of wastewater to total irrigation water was 0.25, 0.50, 0.75 and 1.0 in I2, I3, I4 and I5, respectively. Wheat was cultivated with three irrigations and recommended doses of fertilizer in three consecutive years. Wastewater contained nitrogen (N), phosphorus (P) and potassium (K) @ 17.5, 3.7 and 10.3 mg/L, respectively, and irrigation by raw wastewater (I5) contributed 19.1, 15.1 and 21.7% of the recommended N, P and K, respectively. Biomass yield increased with increasing fraction of wastewater in irrigation. Grain yield increased for the wastewater fraction of 0.50 - 0.75 in irrigation but decreased when irrigation was applied by raw wastewater. Excess fertilizer (under I5) boosted up growth of wheat, but did not contribute to the grain yield. Number of grains per spike; and grain, straw and biological yields significantly (p = 0.05) increased due to the contribution of wastewater. Wastewater significantly improved grain and biomass production, with the largest value obtained in I4 (4.61 t/ha grain yield and 11.36 t/ha biomass yield).  Raw wastewater in combination with recommended fertilizer doses caused over-fertilization that contributed only in biomass production but not in grain production of wheat and irrigation by wastewater substantially reduced fertilizer requirement of wheat.The Agriculturists 2016; 14(1) 01-14

scholarly journals Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production

2012 ◽  
pp. 89-93
Author(s):  
Tamás Árendás ◽  
Zoltán Berzsenyi ◽  
Péter Bónis
Keyword(s):  
Regression Analysis ◽  
Grain Yield ◽  
Durum Wheat ◽  
Crop Production ◽  
Plant Protection ◽  
Sowing Date ◽  
Forest Residues ◽  
Sowing Dates ◽  
Significant Difference ◽  
Long Term Experiment

The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties. The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed. In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance.  In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half,  while no  significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. 

scholarly journals A semi-quantitative approach for modelling crop response to soil fertility: evaluation of the AquaCrop procedure

2014 ◽  
Vol 153 (7) ◽  
pp. 1218-1233 ◽  
Author(s):  
H. VAN GAELEN ◽  
A. TSEGAY ◽  
N. DELBECQUE ◽  
N. SHRESTHA ◽  
M. GARCIA ◽  
...  
Keyword(s):  
Soil Fertility ◽  
Grain Yield ◽  
Soil Water ◽  
Crop Production ◽  
Water Productivity ◽  
Canopy Cover ◽  
Quantitative Approach ◽  
Fertility Level ◽  
Crop Response ◽  
Aquacrop Model

SUMMARYMost crop models make use of a nutrient-balance approach for modelling crop response to soil fertility. To counter the vast input data requirements that are typical of these models, the crop water productivity model AquaCrop adopts a semi-quantitative approach. Instead of providing nutrient levels, users of the model provide the soil fertility level as a model input. This level is expressed in terms of the expected impact on crop biomass production, which can be observed in the field or obtained from statistics of agricultural production. The present study is the first to describe extensively, and to calibrate and evaluate, the semi-quantitative approach of the AquaCrop model, which simulates the effect of soil fertility stress on crop production as a combination of slower canopy expansion, reduced maximum canopy cover, early decline in canopy cover and lower biomass water productivity. AquaCrop's fertility response algorithms are evaluated here against field experiments with tef (Eragrostis tef (Zucc.) Trotter) in Ethiopia, with maize (Zea mays L.) and wheat (Triticum aestivum L.) in Nepal, and with quinoa (Chenopodium quinoa Willd.) in Bolivia. It is demonstrated that AquaCrop is able to simulate the soil water content in the root zone, and the crop's canopy development, dry above-ground biomass development, final biomass and grain yield, under different soil fertility levels, for all four crops. Under combined soil water stress and soil fertility stress, the model predicts final grain yield with a relative root-mean-square error of only 11–13% for maize, wheat and quinoa, and 34% for tef. The present study shows that the semi-quantitative soil fertility approach of the AquaCrop model performs well and that the model can be applied, after case-specific calibration, to the simulation of crop production under different levels of soil fertility stress for various environmental conditions, without requiring detailed field observations on soil nutrient content.

Response of wheat to single short-term waterlogging during and after stem elongation

1988 ◽  
Vol 39 (1) ◽  
pp. 11 ◽  
Author(s):  
WS Meyer ◽  
HD Barrs
Keyword(s):  
Grain Yield ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Root Length ◽  
Stem Elongation ◽  
Stem Growth ◽  
Yield Reduction ◽  
Growth Stages ◽  
Short Term

Transient waterlogging associated with spring irrigations on slowly draining soils causes yield reduction in irrigated wheat. Physiological responses to short-term flooding are not well understood. The aim of this experiment was to monitor above- and below-ground responses of wheat to single waterlogging events during and after stem elongation and to assess the sensitivity of the crop at these growth stages to flooding. Wheat (cv. Bindawarra) was grown in drainage lysimeters of undisturbed cores of Marah clay loam soil. A control treatment (F0) was well-watered throughout the season without surface flooding, while three others were flooded for 96 h at stem elongation (Fl), flag leaf emergence (F2) and anthesis (F3), respectively. Soil water content, soil O2, root length density, leaf and stem growth, apparent photosynthesis (APS), plant nutrient status and grain yield were measured. Soil water content increased and soil O2 levels decreased following flooding; the rate of soil O2 depletion increasing with crop age and root length. Leaf and stem growth and APS increased immediately following flooding, the magnitude of the increases was in the order F1 >F2>F3. A similar order existed in the effect of flooding which decreased the number of roots. Subsequently, leaf and stem growth decreased below that of F0 plants in F1, and briefly in F2. Decreases in APS of treated plants compared to F0 plants appeared to be due to their greater sensitivity to soil water deficit. There was no effect of flooding on grain yield. It is suggested that, while plant sensitivity to flooding decreased with age, flooding at stem elongation had no lasting detrimental effect on yield when post-flood watering was well controlled.

Increasing of wheat grain yield by use of a liquid fertilizer

2020 ◽  
Vol 1 (1) ◽  
pp. 45-49
Author(s):  
Tsotne Samadashvili ◽  
Gulnari Chkhutiashvili ◽  
Mirian Chokheli ◽  
Zoia Sikharulidze ◽  
Qetevan Nacarishvili
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Stem Elongation ◽  
Organic Fertilizer ◽  
Wheat Yield ◽  
Mineral Fertilizer ◽  
Field Trials ◽  
Early Spring ◽  
Wheat Grain ◽  
Liquid Fertilizer

Wheat is a vital crop in Georgia and in the world. Because of the increase in the rate of population growth, improving the grain yield is the way to meet food demand. Proper crop nutrition plays a vital role in maintaining the world’s food supply. Fertilizer is essential for accomplishing this.One of the most important means for increasing the wheat yield is fertilizer, especially, organic fertilizer. The present research was carried out to study the effects of different doses (150ml, 200ml and 300 ml on ha) of humic organic fertilizer “Ecorost” on yield of winter wheat cultivar “Tbilisuri 15”. The humic liquid fertilizer "Ecorost" is a peat-based organic-mineral fertilizer. The product is active and saturated due to the use of the latest technology and living bacteria found in peat. The field trials were conducted in 2017-2019 at the Experimental Site of Scientific Research Center of Agriculture in Dedopliskharo- arid region (Eastern Georgia).Liquid fertilizer was applied two times: in tillering stage in early spring and two weeks after - in stem elongation stage. Results indicated that the highest wheat grain yield (4t/ha) was achieved when the plants were fertilized with 300 ml on 1 ha ofEcorost. Applications of liquid fertilizer “Ecorost” increased grain yield of winter wheat by 16.2% in comparison with standard nitrogen fertilization. Thus, liquid fertilizer “Ecorost” had a significant effect on wheat grain yield compared to control standard nitrogen fertilizer.

Sign in / Sign up

Export Citation Format

Share Document