Influence of benzimidazole fungicides on incidence of Botrytis allii infection of onion leaves and subsequent incidence of onion neck rot in storage in Tasmania, Australia

2006 ◽  
Vol 46 (12) ◽  
pp. 1661 ◽  
Author(s):  
M. I. Chilvers ◽  
F. S. Hay ◽  
J. Hills ◽  
J. J. C. Dennis ◽  
C. R. Wilson
Keyword(s):  
Field Trial ◽  
Block Design ◽  
Benzimidazole Fungicides ◽  
Leaf Infection ◽  
Botrytis Allii ◽  
The Mean

Neck rot of onion caused by Botrytis spp., including B. allii, has previously been controlled in Australia with the fungicide Benlate (benomyl). Production of Benlate has recently ceased, therefore a field trial was conducted to examine the efficacy of alternative benzimidazoles fungicides. The trial compared 2 carbendazim fungicides (Marvel and Spin Flo) at 3 rates of application with Benlate applied at commercial rates and to non-treated plots in a randomised complete block design with 4 replicate plots per treatment. Fungicides were applied at 89, 96, 112 and 119 days after sowing. Plots were sprayed with inoculum consisting of a suspension of B. allii conidia 103 days after sowing. The incidence of B. allii infection in leaves was estimated 10 times during the season by collection and incubation of leaf samples. Fifty-six days after inoculum application the mean incidence of B. allii in leaves from fungicide treatments ranged from 0 to 10%, significantly lower (P<0.05) than that of non-treated plots (28.8%). The mean incidence of neck rot in bulb samples after 3 months of storage ranged from 1.0 to 9.9% in fungicide treatments, significantly (P<0.05) lower than that of non-treated plots (63.4%). The incidence of B. allii leaf infection in plots sampled at different times during the season and the incidence of neck rot in storage were all significantly correlated (r = 0.42–0.61, P<0.01), except prior to application of inoculum.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

scholarly journals Heterobeltiosis in French Marigold (Tagetes patula L.)

2016 ◽  
Vol 8 (8) ◽  
pp. 182
Author(s):  
Kanwar Priyanaka ◽  
Y. C. Gupta ◽  
S. R. Dhiman ◽  
R. K. Dogra ◽  
Sharma Madhu ◽  
...  
Keyword(s):  
Rainy Season ◽  
Quantitative Traits ◽  
Block Design ◽  
Tagetes Patula ◽  
Male Sterile ◽  
Randomized Block Design ◽  
Parental Material ◽  
The Mean ◽  
Parental Lines ◽  
Better Than

<p>The studies on heterosis were carried with four male sterile lines namely; ms<sub>7</sub>, ms<sub>8</sub>, ms<sub>9,</sub> ms<sub>10</sub> and 18 diverse pollinators as tester by using line × tester crossing programme. The 72 F<sub>1</sub> hybrids were produced and evaluated along with 22 parental lines during summer 2009 and rainy season 2009 in Randomized Block Design. Observations were recorded on nine quantitative traits during both the seasons. Highly significant variances for all the traits indicated the sufficient variability in the parental material for all the characters under study. The performance of F<sub>1</sub> hybrids was much better than the mean performance of parents during both the crop seasons. Appreciable heterosis was observed in all the characters, except flower weight in summer and plant height in rainy season.</p>

scholarly journals Effects of Insecticides for Controlling Hogplum Beetle Podontia 14-punctata under Laboratory and Field Conditions

2015 ◽  
Vol 8 (1) ◽  
pp. 79-83
Author(s):  
MJ Uddin ◽  
MMH Khan
Keyword(s):  
Natural Resources ◽  
Field Condition ◽  
Field Trial ◽  
Adult Stage ◽  
Control Treatment ◽  
Larval Instars ◽  
Significant Difference ◽  
Laboratory Trial ◽  
The Mean ◽  
Hog Plum

Experiments on hogplum beetle, Podontia 14-punctata were carried out to find out the suitable insecticide(s) with appropriate dose(s) for suppressing both larvae and adults. Results revealed that the highest mortality (100%) was found in 1st instar larvae after 24 hours at each dose of superior 505EC and the lowest mortality was in T4 treated leaves. The highest mortality was also found in 2nd, 3rd, 4th and adult stages of hog-plum beetle by T5 and T6 treatments. No mortality was observed in control treatment in laboratory trial. The mean number of larvae ranged from 1.5 to 7.6 per square meter of quadrate at one week after last spray. No significant difference was observed among treatments regarding percent leaf infestation at one day before 1st spray. The percent leaf infestation ranged from 5.01 to 9.82 at one week after last spray. The lowest percent (5.87%) leaf infestation was found in T6 treated plants while the highest percent (15.76%) leaf infestation was found in untreated control plants. The highest mortality was observed in T5 and T6 treated plants at all larval instars and no significant difference was found between two doses of each insecticide under field condition. The results of field trial also revealed that the minimum dose (0.75 ml L-1 of water) of Superior 505 EC is sufficient to suppress the field population of larvae and adults of Podontia 14-punctata effectively. Finally, it may be concluded that the highest mortality was found in all larval instars and adult stage of hog-plum beetle after 24 hours at each dose of superior 505 EC (T5 and T6 treatments) both in laboratory and field trials.J. Environ. Sci. & Natural Resources, 8(1): 79-83 2015

scholarly journals Yield, water use efficiency, and yield response factor in carrot crop under different irrigation depths

2016 ◽  
Vol 46 (7) ◽  
pp. 1145-1150 ◽  
Author(s):  
Daniel Fonseca de Carvalho ◽  
Dionizio Honório de Oliveira Neto ◽  
Luiz Fernando Felix ◽  
José Guilherme Marinho Guerra ◽  
Conan Ayade Salvador
Keyword(s):  
Water Use Efficiency ◽  
Soil Water ◽  
Water Use ◽  
Block Design ◽  
Time Domain Reflectometry ◽  
Yield Response ◽  
Response Factor ◽  
Use Efficiency ◽  
The Mean ◽  
Yield Response Factor

ABSTRACT: The aim of the present study was to evaluate the effect of different irrigation depths on the yield, water use efficiency (WUE), and yield response factor (Ky) of carrot (cv. 'Brasília') in the edaphoclimatic conditions of Baixada Fluminense, RJ, Brazil. Field trials were conducted in a Red-Yellow Argisol in the 2010-2011period. A randomized block design was used, with 5 treatments (depths) and 4 replicates. Depths were applied by drippers with different flow rates, and the irrigation was managed by time domain reflectometry (TDR) technique. The reference (ETo) and crop (ETc) evapotranspiration depths reached 286.3 and 264.1mm in 2010, and 336.0 and 329.9mm in 2011, respectively. The root yield varied from 30.4 to 68.9t ha-1 as a response to treatments without irrigation and 100% replacement of the soil water depth, respectively. Values for WUE in the carrot crop varied from 15 to 31kg m-3 and the mean Ky value was 0.82. The mean values for Kc were obtained in the initial (0.76), intermediate (1.02), and final (0.96) stages. Carrot crop was influenced by different water depths (treatments) applied, and the highest value for WUE was obtained for 63.4% of soil water replacement.

Wisc Factor Structure for Normal Negro Pre-School Children

1964 ◽  
Vol 15 (2) ◽  
pp. 543-548 ◽  
Author(s):  
R. Travis Osborne
Keyword(s):  
Factor Analysis ◽  
School Children ◽  
Digit Span ◽  
Block Design ◽  
School Level ◽  
School Factors ◽  
Intelligence Scale ◽  
Picture Arrangement ◽  
The Mean ◽  
Intercorrelation Matrix

In order to estimate the dimensionality of the Wechsler Intelligence Scale for Children, factor analysis was applied to a 30 by 30 intercorrelation matrix of the WISC and four reference tests. The 10 standard WISC subtests, except Coding, were split into two, three, or four parts to yield as many variables as possible. Ss, were 111 Negro pre-school children; mean age, 6 yr. 1 mo.; the mean full scale IQ was 84. Evidence is presented supporting 10 statistically significant orthogonal dimensions. Not all factors are perfectly congruent with the subtest structure of the WISC or concordant with the results of prior factorizations of the WISC at the pre-school level. There is no factor for Block Design apart from Picture Arrangement. The Digit Span subtest splits involve three different WISC factors, two are from the performance section of the test and one is from the verbal section. Coding is involved in only one factor; Manipulation of Areas, one of the non-verbal reference tests. At least 7 of the 10 significant pre-school factors are readily identified by WISC subtests or combinations of WISC subtests.

scholarly journals SPRAY APPLICATIONS TO TOMATO PLANTS IN GREENHOUSES. PART 2: EFFECT OF SPRAY LANCE TYPE

2009 ◽  
Vol 40 (3) ◽  
pp. 49 ◽  
Author(s):  
Emanuele Cerruto ◽  
Giuseppe Emma ◽  
Giuseppe Manetto
Keyword(s):  
Block Design ◽  
The Body ◽  
Lower Limbs ◽  
Internal Layer ◽  
Protective Equipment ◽  
Body Parts ◽  
Tomato Plants ◽  
Application Rates ◽  
Two Factors ◽  
The Mean

The present paper reports the results of some spray application trials carried out in a greenhouse with full developed tomato plants to assess foliar deposition, ground losses, and dermal operator exposure when using handheld high pressure spray lances and when walking backwards during treatments. Two spray lance types (conventional with one nozzle and Yamaho C-6 with two steel nozzles, each with two orifices) and two working pressures (10 and 20 bar) were taken into consideration. An experimental design with two factors (spray lance and pressure) was adopted, arranged according to a randomised block design with three replicates. Volume application rates ranged from 775 up to 1252 L/ha, but all data were normalised to 1000 L/ha. The results showed no statistically significant differences in the mean foliar deposition between the two spray lances and the two working pressures. However, the higher pressure improved significantly the deposit into the internal layer of the canopy (+57%), whereas the Yamaho C-6 spray lance produced a higher deposit on the external layer at any pressure. The greatest differences between external and internal layer were mainly concentrated in the middle and high parts of the canopy, where there were 55 007_Cerruto(557)_49 18-11-2009 11:59 Pagina 55 the highest values of LAI and number of foliar layers. The fraction of the applied volume rate on the ground was on average 25 percent and it was affected only by the pressure value: it increased from 21.7 to 28.7 percent when the pressure increased from 10 to 20 bar, due mainly to the contribution of the conventional spray lance under the sprayed twin-rows. Finally, neither pressure nor spray lance type affected significantly the dermal operator exposure. Upper limbs accounted for 51 percent of the total exposure, while trunk and lower limbs accounted for 24 percent each. The body parts more exposed were the left arm and the hands, but also relatively high was the deposit on the respirator, so operators should ever wear appropriate personal protective equipment.

scholarly journals Morpho-physiological Traits and Mineral Composition on Local Maize Population Growing in Agro Ecological Conditions in Kosova

2013 ◽  
Vol 5 (2) ◽  
pp. 232-237
Author(s):  
Sali ALIU ◽  
Imer RUSINOVCI ◽  
Shukri FETAHU ◽  
Kemajl BISILIMI
Keyword(s):  
Block Design ◽  
Physiological Traits ◽  
Cellulose Content ◽  
Maize Breeding ◽  
Maize Population ◽  
Maize Populations ◽  
Randomized Complete Block Design ◽  
Morphological And Physiological Traits ◽  
The Mean ◽  
Field And Laboratory Conditions

Twelve local maize populations were evaluated at the experimental farm, University of Prishtina, Kosovo. The study was conducted to assess the magnitude of genetic variation in local maize populations for different morphological-physiological and chemical composition under field and laboratory conditions. Randomized complete block design (RCBD) with three replications was used for laying out the experiment. The results showed that there were significant differences for most morphological and physiological traits under study. The mean grain yield of all populations was 102.96 g plant-1. The protein and oil contents ranged between 11.53 to 9.43% and 4.23 to 4.87% respectively. The cellulose content varied from 6.03 to 6.37%. There were also big differences regarding phenotypic correlations. The present study revealed considerable amount of diversity among the local maize populations which could be manipulated for further improvement in maize breeding.

scholarly journals Detecting benzimidazole resistance in Botrytis allii using molecular techniques

2010 ◽  
Vol 63 ◽  
pp. 271-271
Author(s):  
M-I. Khan ◽  
S.R. Bulman ◽  
S.L.H. Viljanen-Rollinson ◽  
V.M. Marroni ◽  
I.A.W. Scott
Keyword(s):  
Storage Disease ◽  
Single Point ◽  
Resistance Management ◽  
Pcr Primers ◽  
Molecular Techniques ◽  
Single Point Mutation ◽  
Management Tools ◽  
Benzimidazole Fungicides ◽  
Botrytis Allii ◽  
Pcr Test

Neck rot caused by Botrytis allii is an important storage disease of onions Fungicides including benzimidazoles have been used as seed treatments and crop applications to control this disease during seed and bulb production Resistance to benzimidazole fungicides has been previously reported in B allii from New Zealand Five sensitive and five resistant isolates of the pathogen were grown in culture for DNA extraction and analysis of sequences of 946;tubulin fragments Sequence analysis revealed a single point mutation in the 946;tubulin gene in the resistant isolates PCR primers to detect the mutation were designed and tested and these clearly differentiated resistant from sensitive isolates The PCR test developed in this study will allow rapid and costeffective screening of B allii isolates to determine their sensitivity to benzimidazole fungicides The test provides technology that will assist in the development of fungicide resistance management tools for onion crops

scholarly journals Effect of Seeding Rate On Growth And Yield Of Okra (Abelmoschus Esculantus) In Zuru Northern Guinea Savanna Of Nigeria

2018 ◽  
Vol 6 (02) ◽  
Author(s):  
Yohanna J, A. ◽  
Muhammad A, M.
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth And Yield ◽  
Land Resource ◽  
Seeding Rate ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Resource Space ◽  
Plant Stand ◽  
The Mean

Field experiment was carried out during 2010 rainy season to find the effect of seeding rate on the growth and yield of okra (Abelmuschus esculentus) in Zuru Northern Guinea Savannah. Zuru is located in Zuru Local government area of Kebbi State (Latitude 11o 251 to 11o 551 North and Longitude 4o 51 to 5o 251 East of the equator). The experiment consisted of three treatments that is planting okra at one plant per stand (S1), two plants per stand (S2) and three plants per stand (S3). The experiment was laid out in randomized complete block design (RCBD) and the treatments replicated three time. The result of the experiment has shown that plant height and number of leaves/plant at 3, 6 and 9 weeks after planting (    WAP) were significantly influenced by seeding rate (P<0.05). At 3, 6 and 9 WAP tallest plants were obtained from okra plants planted at three plants/stand (27.83, 54.0 and 77.0cm) respectively followed by okra planted at two plant/stand (24.77, 50.67 and 74.33 leave/plant respectively ). However, more number of leaves/plant were obtained from okra plant at one plant/stand (9.67, 24.67 and 48.0 leaves/plant respectively) followed by okra planted at two plants/stand (8.33, 18.33 and 36.33 leaves/plant respectively). Seeding rate had significant influence on time of 50 percent flowering with one plant/stand first attaining 50 percent flowering stage just within 36.33 days followed by okra planted at two plants/stand (38 days). The mean fresh fruit yield of okra was also significantly influenced by seeding rate with the highest yield of fresh fruits obtained from three plants/stand (83.34/ha) followed by okra planted at two plants/stand (55.56/ha). However, the result of the findings recommends that, okra should be planted at two plants/stand for medium sized and marketable okra fresh fruits since at three plants/stand leads to the production of undersized fresh fruits which do not often attract customers. At one plant/stand, there seemed to be early fruiting and bigger sized fresh fruits but low total yield due to underutilization of land resource/space. Planting at one plant/stand should therefore be avoided

scholarly journals Growth Performance of Lettuce Using Fermented Products as Organic Fertilizers

2019 ◽  
Vol 1 (3) ◽  
pp. 65
Author(s):  
Kareen Lynn E. Negado
Keyword(s):  
Growth Performance ◽  
Block Design ◽  
Organic Fertilizers ◽  
Control Groups ◽  
Lettuce Seeds ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
And Control ◽  
Fermented Products

This study evaluates the growth performance of lettuce (Lactuca sativa L.) utilizing various fermented products as organic fertilizers. Growth performance is determined through the plant’s weight and leaves and significant differences in growth among various treatments: (a) fish trash, (b) scrap seaweeds, (c) kangkong, and control groups urea (positive) and water (negative) was also determined. Kangkong leaves are fermented for 10 days, fish trash for 14 days and 1 month for seaweeds. Lettuce seeds are sown before transplanting (15 days after germination) into pots and placed in raised beds. Randomized complete block design is utilized in the experiment. Growth performance is measured through the number of leaves 10, 20, and 30 days after transplant and mass of plant upon harvest. After 30 days, the lettuce was harvested. Based on the findings, the soil and fermented products are acidic and the needed organic matter for optimum growth of lettuce are not sufficient as well as some nutrients of the fermented products. Among the organic fertilizers, kangkong at 30 ml performs best in terms of the growth performance of lettuce. Urea performs best in terms of the mass upon harvest. Significant differences exist in the mean number of leaves of lettuce treated with various amounts of organic fertilizers with the plants that receive urea. Lettuce produce more number of leaves and with the highest mass upon harvest when treated with urea compared with organic fertilizers applied after 30 days from transplant. Keywords: fermented kangkong; fish trash; growth performance; lettuce; scrap seaweeds

Sign in / Sign up

Export Citation Format

Share Document