scholarly journals Monitoring of resource-efficient provision of Ukrainian dairy processing enterprises with high-quality raw milk on the basis of international requirements

2021 ◽  
Vol 915 (1) ◽  
pp. 012030
Author(s):  
N Kushnir ◽  
A Ventsuryk ◽  
A Zhemba ◽  
D Tsaruk
Keyword(s):  
Raw Materials ◽  
Hazard Analysis ◽  
Raw Milk ◽  
Production Costs ◽  
Raw Material ◽  
High Quality ◽  
Milk Processing ◽  
Critical Control Points ◽  
Key Factor ◽  
Definition Of

Abstract The article provides information on the main problems of development of dairy enterprises in Ukraine on the criteria of sustainable development and taking into account the vector of the European integration course of the country. The level of providing milk processing enterprises with the quality of raw milk is analyzed. The main trends in the supply of raw milk from agricultural enterprises and households of Ukraine by varieties are presented and analyzed. The dynamics of milk supply and its price are also presented. It is established that the use of quality raw milk directly affects the efficiency of milk processing enterprises. Important aspects of quality control of raw dairy products at enterprises are outlined. High-quality dairy production and reduction of production costs are impossible without the functioning of the raw material quality monitoring system. To this end, it is necessary to introduce the principles of hazard analysis and critical control points in the management structure of dairy companies. It is proved that the key factor of global economic development is the state of the environment, so monitoring the supply of milk - raw materials should also be accompanied by the definition of a set of resource efficiency indicators.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

scholarly journals The Influence of Fermented Mare’s Milk Processing Under Pressure of Gaseous Nitrogen on the Quality of Koumiss

2020 ◽  
Vol 11 (2) ◽  
pp. 2350-2354
Author(s):  
Tatyana V. Kabanova ◽  
Mariya V. Dolgorukova ◽  
Sergey I. Okhotnikov ◽  
Elena V. Tsaregorodtseva ◽  
Sergey Yu. Smolentsev ◽  
...  
Keyword(s):  
Negative Impact ◽  
Raw Materials ◽  
Raw Milk ◽  
Liver Weight ◽  
Fat Content ◽  
Gaseous Nitrogen ◽  
Milk Processing ◽  
Nutritional Qualities ◽  
Pure Cultures ◽  
Increase Liver Weight

The urgency of the problem of increasing the nutritional qualities of mare's milk is that, it has versatile uses. Many people traditionally prefer koumiss made of milk with high fat content, as it has good taste, mouth-watering appearance, high calorie content, helps to increase liver weight. In many patients, including tuberculosis, hypotrophic and malnourished due to a long and serious illness, the latter aspect is an important part of treatment. In the production of raw materials for baby and diet food, first of all, it is necessary to achieve an increase in the protein and fat content of mares, as well as to stabilize the content of valuable components in milk during lactation. Therefore, the search for methods for correcting the composition of dairy raw materials is relevant to industry issues. This article presents the results on the research of influence of Hydro mechanical processing on the physicochemical and microbiological properties of mare's milk. Milk processing treatment by gaseous nitrogen was carried out at laboratory-patented system. This method has not had a negative impact on its physical and chemical characteristics, but significantly increased the bactericidal life. The introduction of pure cultures of koumiss leaven in processed and not processed raw milk has reduced the acidity build-up to the optimal value allowing increase in the life of koumiss.

scholarly journals CALCULATION OF PRODUCTION COST IN UD. USAHA BARU WITH FULL COSTING METHOD

2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Analysis Data ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Other Information ◽  
Cost Of Production ◽  
The Cost

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.

scholarly journals Prevalence and antibiotic susceptibility profile of Staphylococcus aureus from milk and milk products in Nasarawa State, Nigeria

2020 ◽  
Vol 18 (1) ◽  
pp. 1-12
Author(s):  
A. Yakubu ◽  
I.O Abdullahi ◽  
C.Z. Whong ◽  
B. Olayinka
Keyword(s):  
Staphylococcus Aureus ◽  
Antibiotic Susceptibility ◽  
Hazard Analysis ◽  
Raw Milk ◽  
Fermented Milk ◽  
Milk Products ◽  
Milk Samples ◽  
Critical Control Points ◽  
Agar Disc ◽  
Resistance Patterns

This study determined the prevalence and antibiotic susceptibility profile of Staphylococcus aureus isolated from milk and milk products in Nasarawa State, Nigeria. A total of 180 samples comprising of fresh raw milk, bulk milk, Nono, and Kindirmo were collected over a period of 6 months. Standard microbiological procedures were employed in the isolation, identification, characterization and determination of the antibiogram of S. aureus from the milk samples. Characterization was achieved by morphological, biochemical characteristics using conventional methods and Microgen® STAPH-ID kits. The isolates were tested for susceptibility or resistance to a panel of 11 commonly used antibiotics using the agar disc diffusion technique. Out of the 180 milk samples examined, nine (9) S. aureus were isolated giving a prevalence of 5.0%. The occurrence of S. aureus was higher in Nono (12.1%) and Kindirmo (10.6%) than in fresh raw milk (5.9%). The kind of water (well water) used for cleaning utensils at the Nono and Kindirmo selling points was found to be a risk factor associated with the occurrence of S. aureus in the products. All of the isolates were resistant to cefoxitin (100%), ampicillin (100%), and amoxicillin/clavulanic acid (100%). The isolates displayed various rates of resistance to erythromycin (22.2%), sulphamethoxazole/trimethoprim (22.2%), and tetracycline (44.4%). Five (5) antibiotic resistance patterns were recorded among the isolates an indication of different levels of use and misuse of antibiotics in the areas studied. The detection of Staphylococcus aureus in fresh and fermented milk in the areas studied suggests that consumption of dairy products especially those produced using traditional methods, constitute a hazard to consumers. It is recommended that since compliance with basic hygiene requirements is not guaranteed, hazard analysis and critical control points (HACCP) concepts should be seen as a part of an effective total hygiene concept at the selling points. Keywords: Antibiotic susceptibility profile, Milk, Nasarawa State, Nigeria, Prevalence, Staphylococcus aureus

scholarly journals Procurement and mobility during the Late Pleistocene: Characterising the stone-tool assemblage of the Picamoixons site (Tarragona, NE Iberian Peninsula)

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
María Soto
Keyword(s):  
Iberian Peninsula ◽  
Late Pleistocene ◽  
Raw Materials ◽  
Management Strategies ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
Hunter Gatherers ◽  
Definition Of ◽  
Ne Iberian Peninsula

The Picamoixons site is a rockshelter located in the province of Tarragona (NE Iberian Peninsula). It was object of two rescue campaigns during 1988 and 1993, which led to the recovery of a complete archaeological assemblage, including stone tools as well as faunal and portable art remains that date the occupation to the 14th to 11th millennium BP (calibrated). This study involves a petrographic characterisation of the stone-tool assemblage in order to establish: 1) the procurement areas, 2) the raw materials management strategies and 3) the mobility radius and territorial sizes of the hunter-gatherers groups that occupied the site. The method applied comprises in a multiscale analysis that includes systematic prospection, the petrographic characterisation of geological and archaeological samples, an analysis of the chert types represented in the knapping sequence, and the definition of the mobility axes and areas frequented according to lithic procurement.A petrographic analysis of the chert in the prospected area led to the definition of nine macroscopic varieties related to five types (Vilaplana, Morera, Maset, Vilella and Tossa cherts), related to Lower and Upper Muschelkalk (Triassic), Lutetian, Bartonian (Palaeocene) and Sannonian (Oligocene) deposits.The study of the knapping sequences indicates the main exploitation of Bartonian cherts (Tossa type), and the use of Lutetian cherts (Maset and Morera types) for configuring retouched tools. The exploitation of the remaining raw material types identified is considered sporadic and opportunistic.Defining the procurement areas enabled the mobility radius to be assessed as between 3 and 30 km, highlighting the importance of the fluvial basins as natural movement pathways. The results indicate that the main procurement territory was 16 km2 in area, associable with a forager radius. The most remote procurement distances suggest a maximum exploitation area of 260 km2, defining an intra-regional range. This range presents parallelisms with various contemporaneous hunter-gatherers groups in Western Europe, suggesting a progressive mobility reduction dynamic during the Late Pleistocene-Initial Holocene.

Improving the quality of raw milk and yogurt

2021 ◽  
pp. 49-57
Author(s):  
T. V. Ananyeva ◽  
V. I. Ostroukhova
Keyword(s):  
Electromagnetic Radiation ◽  
Raw Materials ◽  
Educational Institution ◽  
Raw Milk ◽  
Negative Influence ◽  
Raw Material ◽  
Federal State ◽  
Expert Assessment ◽  
Microbiological Safety

Milk is a part of many food products. In the expert assessment of the quality of raw materials, primary attention should be paid to its microbiological safety, since poisoning with dairy products is a common cause of diseases of the gastrointestinal tract. The experiment has been carried out on the base in the Teaching and Production Livestock Farm in the Federal State Budgetary Educational Institution of Higher Education “Russian State Agrarian University – Moscow Agricultural Academy named after K. A. Timiryazev” (Moscow). The purpose of the research was to improve the quality indicators of raw milk and yogurt. The method of processing raw milk, which reduces the number of potentially dangerous microorganisms in the products produced from it, has been studied. During the experiment the influence of electromagnetic radiation on organoleptic and physic and chemical parameters has been observed; the quantitative and qualitative composition of milk and yogurt microorganisms has been evaluated. The samples of raw materials had a uniform consistency without sediment and flakes, the color was milky white, and the smell was characteristic of natural cow’s milk. Electromagnetic treatment did not affect the main elements of the chemical composition of milk: the mass fraction of dry substances, fat, protein and lactose. In the experimental samples of raw milk after electromagnetic pulses treatment, the decrease in the growth rate of microorganisms including Quantity of Mesophilic Aerobic and Facultative Anaerobic Microorganisms (QMAFAnM), yeast and mold, has been noted. No bacteria of the Staphylococcus aureus and Escherichia coligroups have been found in the milk samples. The electromagnetic field had the negligible effect on the amount of lactic acid microorganisms in the raw material. During the experiment, there was no negative influence of electromagnetic radiation on the organoleptic, physic and chemical and sanitary-hygienic parameters of yogurt. The issues of ensuring the microbiological safety of raw milk have been described and the method for optimizing the sanitary and hygienic parameters of yogurt in accordance with the current requirements of regulatory documents has been suggest in the article.

CARBON AND FUEL FROM RUBBER WASTE

2020 ◽  
pp. 103-108
Author(s):  
Gennadi I. Zhuravsky ◽  
Maksim I. Nitievski
Keyword(s):  
Zinc Oxide ◽  
Water Vapor ◽  
Raw Materials ◽  
Liquid Waste ◽  
Raw Material ◽  
High Grade ◽  
High Quality ◽  
Technical Carbon ◽  
Rubber Waste ◽  
Composite Mixture

The results of studies of thermolysis waste in the environment of overheated water vapor are presented. It is shown that as a result of fractionation from liquid waste thermolysis products, gasoline and diesel fuel fractions can be obtained. It is proposed to use a composite mixture of liquid and solid waste thermolysis products as raw materials for high-grade technical carbon. Studies have shown that high-grade technical carbon can be obtained as raw materials using a composite mixture of rubber waste thermolysis products as raw materials. The technological line of obtaining technical carbon from the products of thermolysis of worn tires is described. Analysis of the ash produced by the process of burning the composite mixture shows that it contains compounds of iron, zinc and silicon. Therefore, this ash is of interest as a high-quality raw material for the production of zinc oxide, as one of the main ingredients of rubber mixtures.

Sign in / Sign up

Export Citation Format

Share Document