CARBON AND FUEL FROM RUBBER WASTE

2020 ◽  
pp. 103-108
Author(s):  
Gennadi I. Zhuravsky ◽  
Maksim I. Nitievski
Keyword(s):  
Zinc Oxide ◽  
Water Vapor ◽  
Raw Materials ◽  
Liquid Waste ◽  
Raw Material ◽  
High Grade ◽  
High Quality ◽  
Technical Carbon ◽  
Rubber Waste ◽  
Composite Mixture

The results of studies of thermolysis waste in the environment of overheated water vapor are presented. It is shown that as a result of fractionation from liquid waste thermolysis products, gasoline and diesel fuel fractions can be obtained. It is proposed to use a composite mixture of liquid and solid waste thermolysis products as raw materials for high-grade technical carbon. Studies have shown that high-grade technical carbon can be obtained as raw materials using a composite mixture of rubber waste thermolysis products as raw materials. The technological line of obtaining technical carbon from the products of thermolysis of worn tires is described. Analysis of the ash produced by the process of burning the composite mixture shows that it contains compounds of iron, zinc and silicon. Therefore, this ash is of interest as a high-quality raw material for the production of zinc oxide, as one of the main ingredients of rubber mixtures.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

scholarly journals A study to set-up a technological process for purification of Zinc scraps by using liquation method

2021 ◽  
Vol 8 (1) ◽  
pp. 36-43
Author(s):  
Ngoc Vuong Tran ◽  
Manh Hung Luong ◽  
Dinh Dang Nguyen
Keyword(s):  
Zinc Oxide ◽  
Raw Materials ◽  
Time Factors ◽  
Pilot Scale ◽  
Raw Material ◽  
Optimal Time ◽  
Fe Content ◽  
Technology Process ◽  
Zn Content ◽  
Set Up

Zinc scrap is a source of raw material for zinc oxide production. However, to qualify the requirement of raw material for zinc oxide (99.5%) production, refining this source is needed. Many methods are considered such as rectification, chemical method, etc., but difficult to apply on an industrial scale. This workfocused on the investigation of the influence of temperature and time factors for asessing the possibility of applying liquation method for the purification of impurities from scrap zinc.The experiment results show that the optimum temperature of liquation to remove Pb,Fe from zinc scrap is in the range of 440-450°C, the optimal time of the process is 8h for the pot with 8cm in height and 6cm in diameter (the quantity of raw zinc sample is about 2kg / batch), then we can obtain about 80% of zinc metal with an average Zn content of about 97, 0%, both Pb and Fe content decreased to a range from 0.35 to 0.4%, and 1.0 to 1.1%, respectively, which meet the requirement of raw materials for the production of high quanlity ZnO ( 99,5 %). Based on the parameters obtained on lab-scale, a trial on pilot scale of 250 kg / batch was conducted, The result confirms that the quality of the products meets the requirement of raw materials for production of high quality ZnO (99.5%) and a technology process for refining zinc scrap by the liquation was proposed.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

Microbiological and Sensory Suitability of a Novel Raw Material from Porcine Blood and Collagenous Rind Protein as an Ingredient in a Fermented Raw Salami-Type Sausage

2009 ◽  
Vol 72 (4) ◽  
pp. 826-836 ◽  
Author(s):  
BERNHARD NOWAK ◽  
THEDA von MUEFFLING
Keyword(s):  
Raw Materials ◽  
Meat Product ◽  
Raw Material ◽  
High Quality ◽  
B Values ◽  
Porcine Blood ◽  
Quality Product ◽  
Plate Counts ◽  
By Products ◽  
High Quality Product

The aim of this investigation was to develop a treatment for combined porcine blood corpuscle concentrate (BCC) and porcine collagenous connective tissue (rind) so as to make more use of these slaughter by-products as an ingredient in a high-quality product such as salami-type sausage. For this study, BCC was preserved, standardized (sBCC) (15% NaCl and 25% protein content), and then added (proportion of sBCC to rind, 15:85) to rind subjected to different treatments designated A, B, and C (A, 2 h at 90°C; B, 5 min at 90°C; and C, 2 h at 3°C). One half of each mixture was again heated (designated A1, B1, and C1; F70, ∼15), and the other half was only cooled (designated A2, B2, and C2). The now colored, highly proteinaceous rind mixtures (A1 to C2) were then cooled and granulated (designated GBR-A1 to GBR-C2). Three of the granulates (GBRA1, -B1, and -B2) proved to be promising new raw materials: their aerobic plate counts were <log 4.0 CFU/g, and their color was appealing (L* values, 23.9 to 25.9; a* values, 17.7 to 22.2; b* values, 11.5 to 12.7). These granulates were then substituted for part (5%) of the meat in the production of fermented raw salami-type sausages. Two of the sausages (SA1 and SB1) were microbiologically stable (containing mainly lactobacilli) and had positive sensory, chemical, and physical properties (e.g., protein, 21%; water activity, 0.90; pH, between 5.3 and 5.4 on day 36) meeting all standards for commercially produced raw sausages. Our investigation yielded a practicable way to treat and combine two slaughter by-products for use in a high-quality meat product.

scholarly journals Edible coating quality with three types of starch and sorbitol plasticizer

2020 ◽  
Vol 142 ◽  
pp. 02003 ◽  
Author(s):  
Retno Utami Hatmi ◽  
Erni Apriyati ◽  
Nurdeana Cahyaningrum
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Raw Materials ◽  
Chemical Properties ◽  
Edible Coating ◽  
Raw Material ◽  
Randomized Design ◽  
Two Factors ◽  
Completely Randomized Design ◽  
Arrowroot Starch

Edible coating is one form of packaging technology with environmentally friendly theme. The raw materials of edible coating derived from nature, while the waste is decomposed or even zero waste. The research of edible coating using experimental design RAL (completely randomized design) with two factors, namely the type of raw material used tuber starch (cassava, arrowroot and canna) and the percentage of starch (3%, 4% and 5%) (b/v) with three replications time. The quality analisys of edible coating includes the physical properties (thickness (mm), tensile strength (N) and elongation (mm)) and chemical properties (moisture content (%), solubility (%), the water vapor transmissin rate (g/hour) and peroxide (mek/kg). The research showed that the edible coating with sorbitol plasticizer of arrowroot starch 4% provide best physicochemical properties (thickness 0,09mm; 1,63N tensile strength; elongation 84,38mm; water content of 11.19%; solubility of 31.40%; the transfer of water vapor 0,16g / h and 3,20mek/ kg).

scholarly journals New technological and technical solutions in dietary pear compote production

2020 ◽  
Vol 161 ◽  
pp. 01056
Author(s):  
Magomed Akhmetov ◽  
Amiiat Demirova ◽  
Vladimir Piniaskin ◽  
R.A. Rakhmanova
Keyword(s):  
Water Vapor ◽  
Traditional Method ◽  
Raw Materials ◽  
Hot Water ◽  
Saturated Water Vapor ◽  
High Quality ◽  
Saturated Water ◽  
Preliminary Preparation ◽  
Physical And Chemical

Perfection of technological processes, both in preliminary preparation of raw materials and during the final mandatory step of pasteurization, plays a key role in ensuring the quality of finished products, which is important in the production of canned dietary products. The aim of the research was to develop a more efficient way of blanching raw materials with its hardware and soft pasteurization modes, which will allow the production of high quality and competitive compotes for functional nutrition. We have developed and proposed a method of pulse-steam blanching of raw materials directly in glass jars with saturated water vapor, instead of the traditional method using hot water. The essence of the method is as follows. Fruits stacked in jars are pulse heated for 100–160 seconds (depending on the volume of the container) with saturated water vapor with temperature of 105–110 °C, and then fed into jars with cycles of 10 and 10 seconds respectively. The use of pulsed supply of saturated water vapor contributes to achieving more even heating of the fruit, which are characterized by a relatively large internal thermal resistance, causing overheating of the surface layers, and also provides an increase in the temperature of the product, which allows to pour into the jars syrup at relatively high temperature (97–98 °C), while the traditional technology accounts for the temperature of only 80–85 °C. Implementation of this method ensures the temperature level of the product entering the pasteurization stage being 78–80 °C, as opposed to the traditional method, where the temperature of the product is 45–48 °C. After that, the jars will be filled with syrup with a temperature of 97–98 °C, sealed and sent for pasteurization on accelerated modes. To implement the new method of blanching, the design of the device for pulse-steam blanching of fruits in glass jars has been developed. New thermal sterilization regimes have been developed, taking into account the increased temperature of the product after sealing and improved technology for the production of pear compote. The results of physical and chemical testing confirm the high quality of the finished product.

Raw-Material Availability and the Organization of Technology

1994 ◽  
Vol 59 (1) ◽  
pp. 21-34 ◽  
Author(s):  
William Andrefsky
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Poor Quality ◽  
Important Variable ◽  
Raw Material ◽  
Stone Tool ◽  
High Quality ◽  
Formal Tool ◽  
Lithic Raw Materials ◽  
Tool Types

Ethnographic examples of stone-tool makers in Australia and archaeological examples from three different areas in the western United States indicate that the availability of lithic raw materials is an important variable conditioning stone-tool production technology. Attributes of availability such as abundance and quality of lithic raw materials condition the production of formal- vs. informal-tool types. Poor-quality raw materials tend to be manufactured into informal-tool designs. High-quality lithic raw materials tend to be manufactured into formal-tool designs when such materials occur in low abundance. When high-quality materials occur in great abundance both formal- and informal-tool designs are manufactured. Other factors, such as residential mobility or sedentism, are found to be less-important determinates of lithic-production technology.

scholarly journals Monitoring of resource-efficient provision of Ukrainian dairy processing enterprises with high-quality raw milk on the basis of international requirements

2021 ◽  
Vol 915 (1) ◽  
pp. 012030
Author(s):  
N Kushnir ◽  
A Ventsuryk ◽  
A Zhemba ◽  
D Tsaruk
Keyword(s):  
Raw Materials ◽  
Hazard Analysis ◽  
Raw Milk ◽  
Production Costs ◽  
Raw Material ◽  
High Quality ◽  
Milk Processing ◽  
Critical Control Points ◽  
Key Factor ◽  
Definition Of

Abstract The article provides information on the main problems of development of dairy enterprises in Ukraine on the criteria of sustainable development and taking into account the vector of the European integration course of the country. The level of providing milk processing enterprises with the quality of raw milk is analyzed. The main trends in the supply of raw milk from agricultural enterprises and households of Ukraine by varieties are presented and analyzed. The dynamics of milk supply and its price are also presented. It is established that the use of quality raw milk directly affects the efficiency of milk processing enterprises. Important aspects of quality control of raw dairy products at enterprises are outlined. High-quality dairy production and reduction of production costs are impossible without the functioning of the raw material quality monitoring system. To this end, it is necessary to introduce the principles of hazard analysis and critical control points in the management structure of dairy companies. It is proved that the key factor of global economic development is the state of the environment, so monitoring the supply of milk - raw materials should also be accompanied by the definition of a set of resource efficiency indicators.

scholarly journals HYDRO ISOLATION MATERIALS, LUMINOPHORE AND OTHER DEFICIENT PRODUCTS, INNOVATIVE TECHNOLOGY

World Science ◽  
2018 ◽  
Vol 1 (12(40)) ◽  
pp. 46-48
Author(s):  
Guram Khitiri ◽  
Ioseb Chikvaidze ◽  
Raul Kokilashvili ◽  
Tinatin Gabunia ◽  
Madona Tsurtsumia
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Innovative Technology ◽  
High Melting ◽  
Operating Characteristics ◽  
High Quality ◽  
High Quantum Efficiency ◽  
Greenish Yellow ◽  
Quality Water ◽  
Water Proofing

One of the main objectives of the project is to develop a methodology for obtaining high quality water-proofing materials. The above- mentioned high-melting tar mass will be used as the main raw material. Especial treatment and further homogenization of the mass – mixture of high-dispersive quartz sand, silicates and other wastes – gives possibility to make various universal and inexpensive compositions. With the aim to improve hydro-insulating and other specific characteristics of the compositions they will be varied by changing the ratio of ingredients. The elasticity of these compositions is conditioned by macromolecular paraffin-ceresin and the polymeric (rubber) components; varying the strength and adhesion is possible by soluble and insoluble silicate-quartz components. The mentioned components can be got in a large amount in region. Therefore, products obtained from cheap raw materials will be inexpensive. The use of the mentioned waste is also important to avoid the pollution of nature. Operating characteristics of the proposed luminophore satisfy requirements of international standarts. In particular, the solutions made from it have an ability to detect invisible cracks of the thick < 1 mm. The light intensity in its greenish-yellow area is 4,5-5 times more than that of standard - uranyl nitrate. It is stable with high quantum efficiency (40-45%).

Sign in / Sign up

Export Citation Format

Share Document