scholarly journals Selection and breeding work with a modern population of Sarboyan carp

2021 ◽  
Vol 937 (3) ◽  
pp. 032034
Author(s):  
Irina Moruzi ◽  
Elena Pishchenko ◽  
Vladimir Gart ◽  
Pavel Beloysov ◽  
Dmitrii Kropachev

Abstract Carp breeding in Western Siberia has been going on for about 1960. Here two breeds of Sarboyan and Altai mirror carp were bred and put into economic use. The Sarboyan carp is a cross with 1/8 of the blood of the Amur carp. The Sarboyan carp has now disappeared in the fish farm, there are its descendants who have not been subjected to selection for 4 generations. To work on the selection of a new intra-breed type, specimens corresponding to classes 1 and 2 were selected from the head reservoir of the fish farm. Specimens of class 1 accounted for 2.6% of all selected fish. The analysis of the exterior showed that as a result of the lack of selection and mating disorderly, the physique of the fish changed. It deviated and is closer to the wild Amur carp. In males, the length index increased by 21.30%, the body became longer and smaller. In females, the same changes are observed in exterior, in addition, there is a decrease in fertility, since in the studied population the correlation between progenity and fecundity is 0.42-0.72. The relative growth of the main exterior features has decreased.

2017 ◽  
Vol 17 (2) ◽  
pp. 177-187 ◽  
Author(s):  
Zhe Cheng ◽  
V. E. Kuzmichev ◽  
D. C. Adolphe

Abstract The presented research deals with the development of comfortable male underwear taking into account the development of pattern block methods and the analysis of the relationships existing between the compression pressure, the knitted materials properties, and some push-up effects. The main aim of this study is to achieve the technical selection of the materials based on KES-FB evaluations.The ease value has been used as the main index to connect the structural design of underwear, on one hand, and the body sizes, on other hand. A “bodyshell” system for testing the soft tissue of male bodies by FlexiForce sensor has been implemented. The pressures under the shells at six different places on the male body with ease changing have been tested.The collected results including maximum-possible pressure and material tensile indexes measured thanks to KES-FB have been analyzed in order to find the most relevant indexes of the material properties. A mathematical equations based on relationships combining theoretical model with practical application have been established. These equations will be helpful for the consumers and designers to select “the suitable knitting materials for male underwear” and they can be used too in the perspective of parameterization in CAD, in order to improve product developments efficiency.


Methodology ◽  
2018 ◽  
Vol 14 (4) ◽  
pp. 177-188 ◽  
Author(s):  
Martin Schultze ◽  
Michael Eid

Abstract. In the construction of scales intended for the use in cross-cultural studies, the selection of items needs to be guided not only by traditional criteria of item quality, but has to take information about the measurement invariance of the scale into account. We present an approach to automated item selection which depicts the process as a combinatorial optimization problem and aims at finding a scale which fulfils predefined target criteria – such as measurement invariance across cultures. The search for an optimal solution is performed using an adaptation of the [Formula: see text] Ant System algorithm. The approach is illustrated using an application to item selection for a personality scale assuming measurement invariance across multiple countries.


EDUSAINS ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 166-175
Author(s):  
Gia Juniar Nur Wahidah ◽  
Sjaeful Anwar

Abstract This research aims to produce science teaching materials in junior level with Energy in The Body as the theme using Four Steps Teaching Material Development  (4STMD). The material is presented in an integrated way so that students can  think holistically and contextually. The method used in this study is Research and Development. In this R&D methods is used 4STMD. There are four steps done on the development of teaching materials, the selection step, structuring step, characterization, and didactic reduction. Selection step includes the selection of indicators in accordance with the demands of the curriculum which is then developed with the selection of concepts and values that are integrated with the concept of science. Structuring step includes make macro structures, concept maps, and multiple representations. Characterization's step includes preparation instruments, then  trial to students to identify difficult concepts. The last, didactic reduction was done by neglect and the annotations in the form of sketches.The test results readability aspect instructional materials lead to the conclusion that by determining the main idea, the legibility of teaching materials reached 67%, with moderate readability criteria. Test results of feasibility aspects based on the results of questionnaires to the 11 teachers lead to the conclusion that the overall, level of eligibility teaching materials reached 91% with the eligibility criteria well. Keywords: teaching materials; energy; 4STMD Abstrak Penelitian ini bertujuan untuk menghasilkan bahan ajar IPA SMP pada tema Energi dalam Tubuh menggunakan metode Four Steps Teaching Material Development (4STMD). Materi disajikan secara terpadu sehingga memacu siswa untuk berpikir secara holistik dan kontekstual. Metode penelitian yang digunakan pada penelitian ini adalah metode penelitian dan pengembangan. Dalam penelitian dan pengembangan yang ini, digunakan metode Four Steps Teaching Material Development (4STMD). Terdapat empat tahap yang dilakukan pada pengembangan bahan ajar, yakni tahap seleksi, strukturisasi, karakterisasi, dan reduksi didaktik. Tahap seleksi meliputi pemilihan indikator yang sesuai dengan tuntutan kurikulum yang kemudian dikembangkan dengan pemilihan konsep dan nilai yang diintegrasikan dengan konsep IPA. Tahap strukturisasi meliputi pembuatan struktur makro, peta konsep, dan multipel representasi dari materi. Tahap karakterisasi meliputi penyusunan instrumen karakterisasi, kemudian uji coba kepada siswa untuk mengidentifikasi konsep sulit. Tahap terakhir, yaitu reduksi didaktik konsep terhadap konsep sulit. Reduksi didaktik yang dilakukan berupa pengabaian dan penggunaan penjelasan berupa sketsa. Hasil uji aspek keterbacaan bahan ajar menghasilkan kesimpulan bahwa berdasarkan penentuan ide pokok, keterbacaan bahan ajar mencapai 67%, dengan kriteria keterbacaan tinggi. Hasil uji aspek kelayakan berdasarkan hasil angket terhadap 11 orang guru menghasilkan kesimpulan bahwa secara keseluruhan tingkat kelayakan bahan ajar mencapai 91% dengan kriteria kelayakan baik sekali. Kata Kunci: bahan ajar; energi; 4STMD  Permalink/DOI: http://dx.doi.org/10.15408/es.v8i2.2039  


2016 ◽  
Vol 11 (3) ◽  
pp. 217
Author(s):  
Estu Nugroho ◽  
Budi Setyono ◽  
Mochammad Su’eb ◽  
Tri Heru Prihadi

Program pemuliaan ikan mas varietas Punten dilakukan dengan seleksi individu terhadap karakter bobot ikan. Pembentukan populasi dasar untuk kegiatan seleksi dilakukan dengan memijahkan secara massal induk ikan mas yang terdiri atas 20 induk betina dan 21 induk jantan yang dikoleksi dari daerah Punten, Kepanjen (delapan betina dan enam jantan), Kediri (tujuh betina dan 12 jantan), Sragen (27 betina dan 10 jantan), dan Blitar (15 betina dan 11 jantan). Larva umur 10 hari dipelihara selama empat bulan. Selanjutnya dilakukan penjarangan sebesar 50% dan benih dipelihara selama 14 bulan untuk dilakukan seleksi dengan panduan hasil sampling 250 ekor individu setiap populasi. Seleksi terhadap calon induk dilakukan saat umur 18 bulan pada populasi jantan dan betina secara terpisah dengan memilih berdasarkan 10% bobot ikan yang terbaik. Calon induk yang terseleksi kemudian dipelihara hingga matang gonad, kemudian dipilih sebanyak 150 pasang dan dipijahkan secara massal. Didapatkan respons positif dari hasil seleksi berdasarkan bobot ikan, yaitu 49,89 g atau 3,66% (populasi ikan jantan) dan 168,47 g atau 11,43% (populasi ikan betina). Nilai heritabilitas untuk bobot ikan adalah 0,238 (jantan) dan 0,505 (betina).Punten carp breeding programs were carried out by individual selection for body weight trait. The base population for selection activities were conducted by mass breeding of parent consisted of 20 female and 21 male collected from area Punten, eight female and six male (Kepanjen), seven female and 12 male (Kediri), 27 female and 10 male (Sragen), 15 female and 11 male (Blitar). Larvae 10 days old reared for four moths. Then after spacing out 50% of total harvest, the offspring reared for 14 months for selection activity based on the sampling of 250 individual each population. Selection of broodstock candidates performed since 18 months age on male and female populations separately by selecting based on 10% of fish with best body weight. Candidates selected broodstocks were then maintained until mature. In oder to produce the next generation 150 pairs were sets and held for mass spawning. The results revealed that selection response were positive, 49.89 g (3.66%) for male and 168.47 (11.43%) for female. Heritability for body weight is 0.238 (male) and 0.505 (female).


Confectionery sunflower - a special area of use of sunflower, which requires the creation of marketable seeds quality features. One of the possible ways to create large-fruited sunflower is to create production hybrids and lines. Objective: to evaluate the created new large-fruited sunflower lines by a complex of morphological characters and determine the best lines for use as large-seeds hybrids as parent components or source material. In 2016-2019 years on the basis of the Institute of Oilseed Crops NAAS a study was conducted to assess the economic characteristics of large-fruited sunflower lines. We studied a collection of 27 lines of large-seeds sources. The lines were created by direct selection or crossing and sampling: Reyny of Argentinean origin, Zaporizhzhya confectionery variety, confectionery hybrid with striped pericarp color of Israeli origin, white seed of Turkish origin, synthetic population - donor of complex resistance. To study from the collection, lines were drawn that went through at least 7 generations with selection for seed size. Experience has shown that the shortest growing season for lines 174d and KP11 was 99 days, and the longest for lines I2K670 was 109 days. In the studied collection, the greatest mass of 1000 seeds has the KP11-146.47g line, which is the mother component and does not have branching. The second by weight of 1000 seeds (109 g) stood out line 168v, which also had branches and pollen fertility restoration genes and will be used as the paternal form. The third largest is also one basket line ZKN51-100. The collection included lines originating from the same combination, but with a different morphotype for the presence and absence of branching. So, based on the combination of KP11 x Zaporizhzhya Confectionery, three lines were obtained. A mass of 1000 seeds was observed in 98-86 g, with the branching line having the largest mass of 1000 seeds. The lines created with one combination VK678 x ZKN32: with a branch 168a had a mass of 1000 seeds 95g, and a line 168b - without a branch 109 g. Of the two lines obtained from the descendants of the combination KP11 x the striped hybrid both had branches, but the seeds were much smaller (weight of 1000 seeds 59 and 79 g). The collection also studied samples created on the basis of varieties and populations 160c, 174, 175b, the mass of 1000 seeds of which turned out to be more acceptable for large-fruited use from 83 to 99 g. Summing up the results of studying the collection of newly created lines, we can highlight the lines 162d, 168v, 175b, KP11 that are potentially promising for use in hybrids. The selections showed that large-fruited lines can be obtained from large-fruited varieties, self-pollination of large-fruited hybrids and crossing lines with hybrids and varieties. Self-pollination and selection of large-fruited lines in several generations does not provide the necessary variability for positive changes in selections. The result of the selection by weight of 1000 seeds in the offspring from crosses and from populations creates opportunities for new large-seeds sunflower.


Glycobiology ◽  
2021 ◽  
Author(s):  
Hannah M Stephen ◽  
Trevor M Adams ◽  
Lance Wells

Abstract Thousands of nuclear and cytosolic proteins are modified with a single β-N-acetylglucosamine on serine and threonine residues in mammals, a modification termed O-GlcNAc. This modification is essential for normal development and plays important roles in virtually all intracellular processes. Additionally, O-GlcNAc is involved in many disease states, including cancer, diabetes, and X-linked intellectual disability. Given the myriad of functions of the O-GlcNAc modification, it is therefore somewhat surprising that O-GlcNAc cycling is mediated by only two enzymes: the O-GlcNAc transferase (OGT), which adds O-GlcNAc, and the O-GlcNAcase (OGA), which removes it. A significant outstanding question in the O-GlcNAc field is how do only two enzymes mediate such an abundant and dynamic modification. In this review, we explore the current understanding of mechanisms for substrate selection for the O-GlcNAc cycling enzymes. These mechanisms include direct substrate interaction with specific domains of OGT or OGA, selection of interactors via partner proteins, posttranslational modification of OGT or OGA, nutrient sensing, and localization alteration. Altogether, current research paints a picture of an exquisitely regulated and complex system by which OGT and OGA select substrates. We also make recommendations for future work, toward the goal of identifying interaction mechanisms for specific substrates that may be able to be exploited for various research and medical treatment goals.


2021 ◽  
pp. 105971232199468
Author(s):  
Paolo Pagliuca ◽  
Stefano Nolfi

We introduce a method that permits to co-evolve the body and the control properties of robots. It can be used to adapt the morphological traits of robots with a hand-designed morphological bauplan or to evolve the morphological bauplan as well. Our results indicate that robots with co-adapted body and control traits outperform robots with fixed hand-designed morphologies. Interestingly, the advantage is not due to the selection of better morphologies but rather to the mutual scaffolding process that results from the possibility to co-adapt the morphological traits to the control traits and vice versa. Our results also demonstrate that morphological variations do not necessarily have destructive effects on robots’ skills.


2021 ◽  
Vol 9 (6) ◽  
pp. 634
Author(s):  
Euichi Hirose ◽  
Noburu Sensui

Ascidians are marine sessile chordates that comprise one of the major benthic animal groups in marine ecosystems. They sometimes cause biofouling problems on artificial structures underwater, and non-indigenous, invasive ascidian species can potentially and seriously alter native faunal communities. Ascidian larvae are usually tadpole-shaped, negatively phototactic, and adhere on substrates by secreting a glue from their adhesive organs. Although larvae often prefer hydrophobic surfaces, such as a silicone rubber, for settlement, hydrophobic materials are often used to reduce occurrence of fouling organisms on artificial structures. This inconsistency may indicate that an attractive surface for larvae is not always suitable for settlement. Micro-scale structures or roughness may enhance the settlement of ascidian larvae, but settlement is significantly reduced by a nano-scale nipple array (or moth-eye structure), suggesting functional properties of similar structures found on the body surfaces of various invertebrates. The substrate preferences of larvae should be one of the important bases in considering measures against biofouling, and this review also discusses the potential uses of materials to safely reduce the impacts of invasive species.


1990 ◽  
Vol 51 (1) ◽  
pp. 23-34 ◽  
Author(s):  
R. A. Mrode ◽  
C. Smith ◽  
R. Thompson

ABSTRACTSelection of bulls for rate and efficiency of lean gain was studied in a herd of Hereford cattle. There were two selection lines, one selected for lean growth rate (LGR) from birth to 400 days and the other for lean food conversion ratio (LFCR) from 200 to 400 days of age, for a period of 8 years. A control line bred by frozen semen from foundation bulls was also maintained. Generation interval was about 2·4 years and average male selection differentials, per generation were 1·2 and — 1·1 phenotypic standard deviation units for LGR and LFCR respectively.Genetic parameters and responses to selection were estimated from the deviation of the selected lines from a control line and by restricted maximum likelihood (REML) techniques on the same material. Realized heritabilities were 0·40 (s.e. 0·12) for LGR and 0·40 (s.e. 0·13) for LFCR using the control line. Corresponding estimates from REML were 0·42 (s.e. 0·10) and 0·37 (s.e. 0·14). The estimate of the genetic correlation between LGR and LFCR was about — 0·69 (s.e. 0·12) using REML.The estimates of direct annual genetic change using deviations from the control were 3·6 (s.e. 1·3) g/day for LGR and — 0·14 (s.e. 0·07) kg food per kg lean gain for LFCR. Corrsponding estimates from REML were similar but more precisely estimated. The correlated responses for LFCR in the LGR line was higher than the direct response for LFCR.


Sign in / Sign up

Export Citation Format

Share Document