scholarly journals β-Cyclodextrin conjugated bifunctional isocyanate linker polymer for enhanced removal of 2,4-dinitrophenol from environmental waters

2018 ◽  
Vol 5 (8) ◽  
pp. 180942 ◽  
Author(s):  
J. M. Anne ◽  
Y. H. Boon ◽  
B. Saad ◽  
M. Miskam ◽  
M. M. Yusoff ◽  
...  
Keyword(s):  
Freundlich Isotherm ◽  
Environmental Water ◽  
Hexamethylene Diisocyanate ◽  
Toluene Diisocyanate ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Environmental Waters ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Optimized Conditions

In this work, we reported the synthesis, characterization and adsorption study of two β-cyclodextrin (βCD) cross-linked polymers using aromatic linker 2,4-toluene diisocyanate (2,4-TDI) and aliphatic linker 1,6-hexamethylene diisocyanate (1,6-HDI) to form insoluble βCD-TDI and βCD-HDI. The adsorption of 2,4-dinitrophenol (DNP) on both polymers as an adsorbent was studied in batch adsorption experiments. Both polymers were well characterized using various tools that include Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer–Emmett–Teller analysis and scanning electron microscopy, and the results obtained were compared with the native βCD. The adsorption isotherm of 2,4-DNP onto polymers was studied. It showed that the Freundlich isotherm is a better fit for βCD-TDI, while the Langmuir isotherm is a better fit for βCD-HMDI. The pseudo-second-order kinetic model represented the adsorption process for both of the polymers. The thermodynamic study showed that βCD-TDI polymer was more favourable towards 2,4-DNP when compared with βCD-HDI polymer. Under optimized conditions, both βCD polymers were successfully applied on various environmental water samples for the removal of 2,4-DNP. βCD-TDI polymer showed enhanced sorption capacity and higher removal efficiency (greater than 80%) than βCD-HDI (greater than 70%) towards 2,4-DNP. The mechanism involved was discussed, and the effects of cross-linkers on βCD open up new perspectives for the removal of toxic contaminants from a body of water.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

scholarly journals Kinetics and adsorption studies of lead (II) onto activated carbon using low cost adsorbents

2018 ◽  
Vol 20 (2) ◽  
pp. 381-388 ◽  
Keyword(s):  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Rate Limiting Step ◽  
Bambusa Vulgaris ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Fagopyrum Esculentum Moench

The removal of Lead (II) from aqueous solutions using Fagopyrum esculentum Moench (Buckwheat) and Bambusa vulgaris (common bamboo) as adsorbents was investigated. The effects of various experimental parameters such as initial concentration, contact time and pH have been studied using batch adsorption technique. All the Adsorption isotherm models fitted well with the adsorption data. However, Freundlich isotherm displayed a better fitting model than the other two isotherm models due to high correlation coefficient (R2). This indicates the applicability of multilayer coverage of the Pb (II) on the surface of adsorbent. The adsorption kinetics was studied using four simplified models and it was found to follow the pseudo-second-order kinetic model which confirmed the applicability of the model. The adsorption mechanism was found to be chemisorption and the rate-limiting step was mainly surface adsorption.

scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48

2011 ◽  
Vol 413 ◽  
pp. 148-153 ◽  
Author(s):  
Xue Na Hu ◽  
Ya Han ◽  
Jia Yan Li ◽  
Jun Yan Wu ◽  
Jian Rong Chen ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene ◽  
Poly Propylene

Thiol-functionalized MCM-48 (SH-MCM-48) was synthesized by co-condensation method, with co-templates of cetyltrimethylammonium bromide (CTAB) and nonionic poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) triblock copolymer (Pluronic P123). The resulting material was characterized by XRD and FT-IR spectrum. The potential of SH-MCM-48 for adsorption Zn (II) from aqueous solution was examined. Batch adsorption studies were carried out to investigate the effect of experimental parameters including pH, metal ions concentration and adsorption time. The maximum adsorption capacities of Zn (II) onto SH-MCM-48 were 30.12, 34.01 and 38.02 mg g-1 at the temperature of 303, 313 and 323K, respectively. The adsorption kinetics data were found to follow the pseudo-second-order kinetic model, and adsorption isotherms were fitted well with Langmuir and Freundlich models. Moreover, the adsorption thermodynamic parameters (△G0, △H0 and △S0) were measured, and indicated that the adsorption was an exothermic and spontaneous process.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

scholarly journals The Presence of Cu Facilitates Adsorption of Tetracycline (TC) onto Water Hyacinth Roots

2018 ◽  
Vol 15 (9) ◽  
pp. 1982 ◽  
Author(s):  
Xin Lu ◽  
Beibei Tang ◽  
Qi Zhang ◽  
Lizhu Liu ◽  
Ruqin Fan ◽  
...  
Keyword(s):  
Water Hyacinth ◽  
Freundlich Isotherm ◽  
Root Surface ◽  
Interactive Effects ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Batch experiments were conducted to investigate the adsorption characteristics of tetracycline (TC), and the interactive effects of copper (Cu) on the adsorption of TC onto water hyacinth roots. TC removal efficiency by water hyacinth roots was ranging from 58.9% to 84.6%, for virgin TC, 1:1 TC-Cu and 1:2 TC-Cu. The Freundlich isotherm model and the pseudo-second-order kinetic model fitted the adsorption data well. Thermodynamics parameters ΔG0 for TC were more negative in the TC plus Cu than the TC-only treatments, indicating the spontaneity of TC adsorption increased with increasing of Cu concentrations. An elevated temperature was associated with increasing adsorption of TC by water hyacinth roots. The additions of Cu(II) significantly increased TC adsorption onto water hyacinth roots within the pH range 4 to 6, because copper formed a strong metal bridge between root surface and TC molecule, facilitating the adsorption of TC by roots. However, Cu(II) hindered TC adsorption onto water hyacinth roots on the whole at pH range from 6–10, since the stronger electrostatic repulsion and formation of CuOH+ and Cu(OH)2. Therefore, the interaction between Cu(II) and TC under different environmental conditions should be taken into account to understand the environmental behavior, fate, and ecotoxicity of TC.

scholarly journals Construction of Novel Polymerizable Ionic Liquid Microemulsions and the In Situ Synthesis of Poly(Ionic Liquid) Adsorbents

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 454 ◽  
Author(s):  
Aili Wang ◽  
Shuhui Li ◽  
Hou Chen ◽  
Ying Liu ◽  
Xiong Peng
Keyword(s):  
Ionic Liquid ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
In Situ Synthesis ◽  
Scattering Data ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ionic Liquid

This paper reports the successful construction of novel polymerizable ionic liquid microemulsions and the in situ synthesis of poly(ionic liquid) adsorbents for the removal of Zn2+ from aqueous solution. Dynamic light-scattering data were used to confirm the polymerization media and to illustrate the effect of the crosslinker dosage on the droplet size of the microemulsion. FTIR and thermal analysis were employed to confirm the successful preparation of the designed polymers and characterize their thermostability and glass transition-temperature value. The optimization of the adsorption process indicates that the initial concentration of Zn2+, pH, adsorbent dosage and contact time affected the adsorption performance of poly(ionic liquid)s toward Zn2+. Furthermore, our research revealed that the adsorption process can be effectively described by the pseudo second-order kinetic model and the Freundlich isotherm model.

scholarly journals Enhanced Biosorption of Pb(II) Ions from Aqueous Solutions onto Citric Acid Treated Aspergillus niger Biomass: Equilibrium and Kinetic Studies

2020 ◽  
Vol 32 (3) ◽  
pp. 508-514
Author(s):  
Vinay Kumar Chintalapudi ◽  
Ramya Krishna S.L. Kanamarlapudi ◽  
Useni Reddy Mallu ◽  
Sudhamani Muddada
Keyword(s):  
Citric Acid ◽  
Aspergillus Niger ◽  
Kinetic Studies ◽  
Order Kinetic ◽  
Ftir Analysis ◽  
Structural Variations ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Optimized Conditions ◽  
Biosorption Kinetics

In the present study, initially Aspergillus niger was tested for biosorption of Pb(II) ions and then studied the effect of pretreatment for enhanced biosorption. It was found that the maximum biosorption potential was achieved with citric acid treatment (70.56 %) in comparison with the biomass without treatment (65.46 %) at a biosorbent dose of 20 mg/L, pH 4, 100 rpm, 37 ºC for 8 h. The optimized conditions for treated Aspergillus niger were determined by optimizing the biosorption parameters such as pH, temperature, biomass dose, incubation time and agitation speed. This study indicates that the citric acid treated Aspergillus niger is an effective biosorbent for removal of lead (II) at optimized conditions with the maximum biosorption potential of 83.6 % as compared to previous reported work. SEM-EDX and FTIR analysis showed the structural variations and the functional groups involved in lead biosorption, respectively. Biosorption kinetics showed that pseudo second order kinetic model as the better fit.

Sign in / Sign up

Export Citation Format

Share Document