scholarly journals Full cell infiltration and thick tissue formation in vivo in tailored electrospun scaffolds

2020 ◽  
Author(s):  
Jip Zonderland ◽  
Silvia Rezzola ◽  
David Gomes ◽  
Sandra Camarero Espinosa ◽  
Ana Henriques Ferreira Lourenço ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Fiber Diameter ◽  
Cell Infiltration ◽  
Tissue Formation ◽  
Cell Seeding ◽  
Subcutaneous Implantation ◽  
Electrospun Scaffolds ◽  
Limited Depth

AbstractElectrospun (ESP) scaffolds are a promising type of tissue engineering constructs for large defects with limited depth. To form new functional tissue, the scaffolds need to be infiltrated with cells, which will deposit extracellular matrix. However, due to dense fiber packing and small pores, cell and tissue infiltration of ESP scaffolds is limited. Here, we combine two established methods, increasing fiber diameter and co-spinning sacrificial fibers, to create a porous ESP scaffold that allows robust tissue infiltration. Full cell infiltration across 2 mm thick scaffolds is seen 3 weeks after subcutaneous implantation in rats. After 6 weeks, the ESP scaffolds are almost fully filled with de novo tissue. Cell infiltration and tissue formation in vivo in this thickness has not been previously achieved. In addition, we propose a novel method for in vitro cell seeding to improve cell infiltration and a model to study 3D migration through a fibrous mesh. This easy approach to facilitate cell infiltration further improves previous efforts and could greatly aid tissue engineering approaches utilizing ESP scaffolds.Statement of significanceElectrospinning creates highly porous scaffolds with nano- to micrometer sized fibers and are a promising candidate for a variety of tissue engineering applications. However, smaller fibers also create small pores which are difficult for cells to penetrate, restricting cells to the top layers of the scaffolds. Here, we have improved the cell infiltration by optimizing fiber diameter and by co-spinning a sacrificial polymer. We developed novel culture technique that can be used to improve cell seeding and to study cytokine driven 3D migration through fibrous meshes. After subcutaneous implantation, infiltration of tissue and cells was observed up to throughout up to 2 mm thick scaffolds. This depth of infiltration in vivo had not yet been reported for electrospun scaffolds. The scaffolds we present here can be used for in vitro studies of migration, and for tissue engineering in defects with a large surface area and limited depth.

scholarly journals Ether-Oxygen Containing Electrospun Microfibrous and Sub-Microfibrous Scaffolds Based on Poly(butylene 1,4-cyclohexanedicarboxylate) for Skeletal Muscle Tissue Engineering

2018 ◽  
Vol 19 (10) ◽  
pp. 3212 ◽  
Author(s):  
Nora Bloise ◽  
Emanuele Berardi ◽  
Chiara Gualandi ◽  
Elisa Zaghi ◽  
Matteo Gigli ◽  
...  
Keyword(s):  
Skeletal Muscle ◽  
Tissue Engineering ◽  
Muscle Tissue ◽  
Skeletal Muscle Tissue ◽  
Cell Alignment ◽  
Fibre Direction ◽  
Electrospun Scaffolds ◽  
Fibre Morphology

We report the study of novel biodegradable electrospun scaffolds from poly(butylene 1,4-cyclohexandicarboxylate-co-triethylene cyclohexanedicarboxylate) (P(BCE-co-TECE)) as support for in vitro and in vivo muscle tissue regeneration. We demonstrate that chemical composition, i.e., the amount of TECE co-units (constituted of polyethylene glycol-like moieties), and fibre morphology, i.e., aligned microfibrous or sub-microfibrous scaffolds, are crucial in determining the material biocompatibility. Indeed, the presence of ether linkages influences surface wettability, mechanical properties, hydrolytic degradation rate, and density of cell anchoring points of the studied materials. On the other hand, electrospun scaffolds improve cell adhesion, proliferation, and differentiation by favouring cell alignment along fibre direction (fibre morphology), also allowing for better cell infiltration and oxygen and nutrient diffusion (fibre size). Overall, C2C12 myogenic cells highly differentiated into mature myotubes when cultured on microfibres realised with the copolymer richest in TECE co-units (micro-P73 mat). Lastly, when transplanted in the tibialis anterior muscles of healthy, injured, or dystrophic mice, micro-P73 mat appeared highly vascularised, colonised by murine cells and perfectly integrated with host muscles, thus confirming the suitability of P(BCE-co-TECE) scaffolds as substrates for skeletal muscle tissue engineering.

Biocompatibility and biodegradation properties of polycaprolactone/polydioxanone composite scaffolds prepared by blend or co-electrospinning

2019 ◽  
Vol 34 (2) ◽  
pp. 115-130 ◽  
Author(s):  
Xin Zhou ◽  
Yiwa Pan ◽  
Ruihua Liu ◽  
Xin Luo ◽  
Xianyan Zeng ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Structural Characteristics ◽  
Tissue Engineering Scaffold ◽  
Morphological Properties ◽  
Composite Scaffolds ◽  
Electrospun Scaffolds ◽  
Hybrid Scaffolds

Electrospun polymer scaffolds are regarded as an ideal tissue engineering scaffold due to similar morphological properties with the native extracellular matrix. Among these, polycaprolactone is widely used to fabricate electrospun fibrous scaffolds due to its excellent biocompatibility, good mechanical properties, and ease of manufacture. However, its low biodegradation rate has a negative influence on its application in tissue engineering scaffold. To address this issue, this study prepared hybrid scaffolds composed of polycaprolactone and polydioxanone (a fast-degrading polyether-ester) via either the blend or co-electrospinning. Subsequently, the structural characteristics, mechanical strength, in vitro/vivo degradation, cellularization, and vascularization of two kinds of hybrid scaffolds were evaluated to decide which method is more suitable for producing tissue engineering scaffolds. The incorporation of polydioxanone increased the mechanical strength of both composite scaffolds. Moreover, co-electrospun scaffolds exhibited improved hydrophilicity compared to blend scaffolds. The results of in vitro and in vivo degradation studies showed that the degradation rate of both composite scaffolds was faster than that of neat polycaprolactone scaffolds due to the incorporated polydioxanone component. Especially in co-electrospun scaffolds, the fast degradation of polydioxanone fiber gave rise to larger pore size, thus leading to faster cellularization and better vascularization compared to blend scaffolds. Therefore, co-electrospinning was demonstrated to be superior to blend electrospinning for the preparation of composite scaffolds. Co-electrospun polycaprolactone–polydioxanone scaffolds may be promising candidates for tissue engineering.

scholarly journals Poly(3-Hydroxybutyrate)-Multiwalled Carbon Nanotubes Electrospun Scaffolds Modified with Curcumin

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2588
Author(s):  
Nader Tanideh ◽  
Negar Azarpira ◽  
Najmeh Sarafraz ◽  
Shahrokh Zare ◽  
Aida Rowshanghiyas ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Tissue Engineering ◽  
Multiwalled Carbon Nanotubes ◽  
Inflammatory Reaction ◽  
3D Structure ◽  
Hydrolytic Degradation ◽  
Multiwalled Carbon ◽  
Electrospun Scaffolds

Appropriate selection of suitable materials and methods is essential for scaffolds fabrication in tissue engineering. The major challenge is to mimic the structure and functions of the extracellular matrix (ECM) of the native tissues. In this study, an optimized 3D structure containing poly(3-hydroxybutyrate) (P3HB), multiwalled carbon nanotubes (MCNTs) and curcumin (CUR) was created by electrospinning a novel biomimetic scaffold. CUR, a natural anti-inflammatory compound, has been selected as a bioactive component to increase the biocompatibility and reduce the potential inflammatory reaction of electrospun scaffolds. The presence of CUR in electrospun scaffolds was confirmed by 1H NMR and Fourier-transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) revealed highly interconnected porosity of the obtained 3D structures. Addition of up to 20 wt% CUR has enhanced mechanical properties of the scaffolds. CUR has also promoted in vitro bioactivity and hydrolytic degradation of the electrospun nanofibers. The developed P3HB-MCNT composite scaffolds containing 20 wt% of CUR revealed excellent in vitro cytocompatibility using mesenchymal stem cells and in vivo biocompatibility in rat animal model study. Importantly, the reduced inflammatory reaction in the rat model after 8 weeks of implantation has also been observed for scaffolds modified with CUR. Overall, newly developed P3HB-MCNTs-CUR electrospun scaffolds have demonstrated their high potential for tissue engineering applications.

Superparamagnetic Core–Shell Electrospun Scaffolds with Sustained Release of IONPs Facilitating in vitro and in vivo Bone Regeneration

2021 ◽  
Author(s):  
Shuying Hu ◽  
Hanbang Chen ◽  
Fang Zhou ◽  
Jun Liu ◽  
Yun Zhu Qian ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Sustained Release ◽  
Mechanical Strength ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Core Shell ◽  
Electrospun Scaffolds ◽  
Dental Implantation

Bone tissue engineering (BTE) is a promising approach to recover insufficient bone in dental implantation. However, the clinical application of BTE scaffolds is limited by their low mechanical strength and...

Cartilaginous Tissue Formation with an Elastic PLCL Scaffold and Human Adipose Tissue-Derived Stromal Cells

2007 ◽  
Vol 342-343 ◽  
pp. 385-388
Author(s):  
So Eun Lee ◽  
Young Mee Jung ◽  
Soo Hyun Kim ◽  
Sang Heon Kim ◽  
Jong Won Rhie ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Adipose Tissue ◽  
Stromal Cells ◽  
Cartilage Tissue Engineering ◽  
Human Adipose Tissue ◽  
Cartilage Tissue ◽  
Tissue Formation ◽  
Cartilaginous Tissue

In cartilage tissue engineering, as a cell source, adult stem cells are very attractive for clinical applications. Recent studies suggest that human adipose tissue-derived stromal cells (ASCs) have multilineage potential similar to bone marrow-derived stromal cells (BMSCs). ASCs are obtained from adipose tissue easily isolated by suction-assisted lipectomy in various body parts. Also, as one of major factors of cartilage tissue engineering, scaffolds have an important role in cartilage formation. Poly(L-lactide-co-ε-carprolactone) scaffolds have physiological activity, biodegradability, high cell affinity, and mechano-activity. The object of this study is cartilaginous tissue formation using highly elastic PLCL scaffolds and ASCs in vitro and in vivo. Poly(L-lactide-co-ε-carprolactone) copolymers were synthesized from lactide and ε-carprolactone in the presence of stannous octoate as catalyst. The scaffolds with 85% porosity and 300-500μm pore size were fabricated by gel-pressing method. ASCs were seeded on scaffolds and cultured for 21days in vitro. Cell/polymer constructs were characterized by reverse transcriptase-polymerase chain reaction for confirming differentiation to chondrocytes onto PLCL scaffolds. Also, for examining cartilaginous tissue formation in vivo, ASCs seeded scaffolds which were induced chondrogenesis for 2 weeks were implanted in nude mice subcutaneously for up to 8weeks. Histological studies showed that implants partially developed cartilaginous tissue within lacunae. And there was an accumulation of sulfated glycoaminoglycans. Immunohistochemical analysis revealed that implants were positively stained for specific extracellular matrix. These results indicate that ASCs and PLCL scaffols could be used to cartilage tissue engineering.

scholarly journals Tubular electrospun scaffolds tested in vivo for tissue engineering

2019 ◽  
Vol 7 (2) ◽  
pp. 635
Author(s):  
Alan Isaac Valderrama-Treviño ◽  
Karen Uriarte-Ruiz ◽  
Juan José Granados Romero ◽  
Andrés Eliú Castell Rodriguez ◽  
Alfredo Maciel-Cerda ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Small Diameter ◽  
Cellular Adhesion ◽  
In Vivo Evaluation ◽  
Structural Support ◽  
Electrospun Scaffolds ◽  
Advantages And Disadvantages ◽  
The Creation

Tissue engineering has been widely used for its great variety of functions. It has been seen as a solution to satisfy the need for vascular substitutes like small diameter vessels, veins, and nerves. One of the most used methods is electrospinning, due to the fact that it allows the use of various polymers, sizes, mandrels and it can adjust the conditions to create personalized scaffolds. For the creation of scaffolds is fundamental to understand the advantages and disadvantages of each polymer, of this, will depend the biodegradability, biocompatibility, porosity, cellular adhesion, and cell proliferation as it is essential to mimic the extracellular matrix and provide structural support for the cells. The aim of this review was to investigate which materials are being used for the creation of tubular scaffolds by electrospinning. Here we selected only in vivo evaluation to demonstrate remodeling of the grafts into native-like tissues, in vitro evaluations had been excluded from this review. We analyze the conditions like speed, distance and voltage and the modifications like growth factors and combinations of natural and synthetic polymers that allow the authors to have a functional scaffold that will suit its purpose.

Decellularized bone extracellular matrix in skeletal tissue engineering

2020 ◽  
Vol 48 (3) ◽  
pp. 755-764
Author(s):  
Benjamin B. Rothrauff ◽  
Rocky S. Tuan
Keyword(s):  
Tissue Engineering ◽  
Bone Regeneration ◽  
Tissue Regeneration ◽  
Animal Studies ◽  
Tumor Resection ◽  
Regenerative Capacity ◽  
Skeletal Tissue ◽  
Large Bone

Bone possesses an intrinsic regenerative capacity, which can be compromised by aging, disease, trauma, and iatrogenesis (e.g. tumor resection, pharmacological). At present, autografts and allografts are the principal biological treatments available to replace large bone segments, but both entail several limitations that reduce wider use and consistent success. The use of decellularized extracellular matrices (ECM), often derived from xenogeneic sources, has been shown to favorably influence the immune response to injury and promote site-appropriate tissue regeneration. Decellularized bone ECM (dbECM), utilized in several forms — whole organ, particles, hydrogels — has shown promise in both in vitro and in vivo animal studies to promote osteogenic differentiation of stem/progenitor cells and enhance bone regeneration. However, dbECM has yet to be investigated in clinical studies, which are needed to determine the relative efficacy of this emerging biomaterial as compared with established treatments. This mini-review highlights the recent exploration of dbECM as a biomaterial for skeletal tissue engineering and considers modifications on its future use to more consistently promote bone regeneration.

In vitro- / in vivo- Untersuchungen zur Biokompatibilität und Bioresorption amorpher Kieselgelfaser für das Tissue engineering humaner Knorpelgewebe

2004 ◽  
Vol 83 (02) ◽  
Author(s):  
A Haisch ◽  
A Evers ◽  
K Jöhrens-Leder ◽  
S Jovanovic ◽  
B Sedlmaier ◽  
...  
Keyword(s):  
Tissue Engineering

Surface Modification by Nanobiomaterials for Vascular Tissue Engineering Applications

2020 ◽  
Vol 27 (10) ◽  
pp. 1634-1646 ◽  
Author(s):  
Huey-Shan Hung ◽  
Shan-hui Hsu
Keyword(s):  
Tissue Engineering ◽  
Vascular Tissue ◽  
Thrombus Formation ◽  
Vascular Grafts ◽  
Vascular Tissue Engineering ◽  
Great Success ◽  
Natural Polymers ◽  
Vascular Biomaterials

Treatment of cardiovascular disease has achieved great success using artificial implants, particularly synthetic-polymer made grafts. However, thrombus formation and restenosis are the current clinical problems need to be conquered. New biomaterials, modifying the surface of synthetic vascular grafts, have been created to improve long-term patency for the better hemocompatibility. The vascular biomaterials can be fabricated from synthetic or natural polymers for vascular tissue engineering. Stem cells can be seeded by different techniques into tissue-engineered vascular grafts in vitro and implanted in vivo to repair the vascular tissues. To overcome the thrombogenesis and promote the endothelialization effect, vascular biomaterials employing nanotopography are more bio-mimic to the native tissue made and have been engineered by various approaches such as prepared as a simple surface coating on the vascular biomaterials. It has now become an important and interesting field to find novel approaches to better endothelization of vascular biomaterials. In this article, we focus to review the techniques with better potential improving endothelization and summarize for vascular biomaterial application. This review article will enable the development of biomaterials with a high degree of originality, innovative research on novel techniques for surface fabrication for vascular biomaterials application.

scholarly journals Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

2021 ◽  
Vol 8 (3) ◽  
pp. 39
Author(s):  
Britani N. Blackstone ◽  
Summer C. Gallentine ◽  
Heather M. Powell
Keyword(s):  
Systematic Review ◽  
Tissue Engineering ◽  
Collagen Type I ◽  
The Body ◽  
Pool Data ◽  
Type I ◽  
High Concentrations ◽  
Increased Strength

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

Sign in / Sign up

Export Citation Format

Share Document